diff mbox

[v2,3/4] ARM: dts: exynos: Fix the active of reset gpios from rinato dts

Message ID 1497521010-8429-4-git-send-email-hoegeun.kwon@samsung.com (mailing list archive)
State Accepted
Headers show

Commit Message

Hoegeun Kwon June 15, 2017, 10:03 a.m. UTC 
This reset gpios is active low, therefore fix from active high to low.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
 arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski June 16, 2017, 4:20 p.m. UTC | #1 
On Thu, Jun 15, 2017 at 07:03:29PM +0900, Hoegeun Kwon wrote:
> This reset gpios is active low, therefore fix from active high to low.
> 
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Thanks, applied this one only. As mentioned before, 4/4 will wait for
driver.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 82e676a..de2702e 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -225,7 +225,7 @@ 
 		reg = <0>;
 		vdd3-supply = <&ldo16_reg>;
 		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
 		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <30>;
 		power-off-delay= <120>;