| Message ID | bc043a64775ec8c9cfcfe6d638e348d38e34eba3.1498422562.git-series.plaes@plaes.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi Priit, This is showing from clock rate of 171428572 in the output of "cat /sys/kernel/debug/clk/clk_summary" for pll-periph-sata. The clock rate should be 100000000 (100 MHz) when read from the hardware. On 26 June 2017 at 06:45, Priit Laes <plaes@plaes.org> wrote: > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where > 6 is fixed post-divider. > > Signed-off-by: Priit Laes <plaes@plaes.org> > --- > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- > 2 files changed, 12 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c > index c0e5c10..de30e15 100644 > --- a/drivers/clk/sunxi-ng/ccu_div.c > +++ b/drivers/clk/sunxi-ng/ccu_div.c Missing handling of fixed_post_div in ccu_div_round_rate. ccu_div_round_rate should multiply the rate by the postdiv before looking up the divider using divider_get_val and divide val by postdiv just before returning. > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, > parent_rate); > > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, > - cd->div.flags); > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, > + cd->div.flags); > + > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > + val /= cd->fixed_post_div; > + > + return val; > } > > static int ccu_div_determine_rate(struct clk_hw *hw, > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, > cd->div.flags); > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > + val *= cd->fixed_post_div; > + > spin_lock_irqsave(cd->common.lock, flags); > > reg = readl(cd->common.base + cd->common.reg); val here is the divider value that is stored in the clock register field not the actual rate so this is incorrect. Instead the rate needs to be multiplied by postdiv just before divider_get_val. > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h > index 08d0744..f3a5028 100644 > --- a/drivers/clk/sunxi-ng/ccu_div.h > +++ b/drivers/clk/sunxi-ng/ccu_div.h > @@ -86,9 +86,10 @@ struct ccu_div_internal { > struct ccu_div { > u32 enable; > > - struct ccu_div_internal div; > + struct ccu_div_internal div; > struct ccu_mux_internal mux; > struct ccu_common common; > + unsigned int fixed_post_div; > }; > > #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \ > -- > git-series 0.9.1 Thanks. Regards, Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 26, 2017 at 08:05:16AM +1000, Jonathan Liu wrote: > Hi Priit, > > This is showing from clock rate of 171428572 in the output of "cat > /sys/kernel/debug/clk/clk_summary" for pll-periph-sata. > The clock rate should be 100000000 (100 MHz) when read from the hardware. This is what I see on Cubietruck. Can you check with sunxi-ccu-wip branch? $ cat /sys/kernel/debug/clk/clk_summary |grep -i sata pll-periph-sata 1 1 100000000 0 0 sata 1 1 100000000 0 0 ahb-sata 1 1 300000000 0 0 > > On 26 June 2017 at 06:45, Priit Laes <plaes@plaes.org> wrote: > > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where > > 6 is fixed post-divider. > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > --- > > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- > > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- > > 2 files changed, 12 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c > > index c0e5c10..de30e15 100644 > > --- a/drivers/clk/sunxi-ng/ccu_div.c > > +++ b/drivers/clk/sunxi-ng/ccu_div.c > > Missing handling of fixed_post_div in ccu_div_round_rate. > ccu_div_round_rate should multiply the rate by the postdiv before > looking up the divider using divider_get_val and divide val by postdiv > just before returning. > > > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, > > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, > > parent_rate); > > > > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > - cd->div.flags); > > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > + cd->div.flags); > > + > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > + val /= cd->fixed_post_div; > > + > > + return val; > > } > > > > static int ccu_div_determine_rate(struct clk_hw *hw, > > > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, > > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, > > cd->div.flags); > > > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > + val *= cd->fixed_post_div; > > + > > spin_lock_irqsave(cd->common.lock, flags); > > > > reg = readl(cd->common.base + cd->common.reg); > > val here is the divider value that is stored in the clock register > field not the actual rate so this is incorrect. Instead the rate needs > to be multiplied by postdiv just before divider_get_val. OK, thanks, this one I wasn't really sure about. > > > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h > > index 08d0744..f3a5028 100644 > > --- a/drivers/clk/sunxi-ng/ccu_div.h > > +++ b/drivers/clk/sunxi-ng/ccu_div.h > > @@ -86,9 +86,10 @@ struct ccu_div_internal { > > struct ccu_div { > > u32 enable; > > > > - struct ccu_div_internal div; > > + struct ccu_div_internal div; > > struct ccu_mux_internal mux; > > struct ccu_common common; > > + unsigned int fixed_post_div; > > }; > > > > #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \ > > -- > > git-series 0.9.1 > > Thanks. > > Regards, > Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Priit, On 26 June 2017 at 15:53, Priit Laes <plaes@plaes.org> wrote: > On Mon, Jun 26, 2017 at 08:05:16AM +1000, Jonathan Liu wrote: >> Hi Priit, >> >> This is showing from clock rate of 171428572 in the output of "cat >> /sys/kernel/debug/clk/clk_summary" for pll-periph-sata. >> The clock rate should be 100000000 (100 MHz) when read from the hardware. > > This is what I see on Cubietruck. Can you check with sunxi-ccu-wip branch? > > $ cat /sys/kernel/debug/clk/clk_summary |grep -i sata > pll-periph-sata 1 1 100000000 0 0 > sata 1 1 100000000 0 0 > ahb-sata 1 1 300000000 0 0 > I checked with your sunxi-ccu-wip branch and I get the same results as you. My branch seems out of date. >> >> On 26 June 2017 at 06:45, Priit Laes <plaes@plaes.org> wrote: >> > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where >> > 6 is fixed post-divider. >> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >> > --- >> > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- >> > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- >> > 2 files changed, 12 insertions(+), 3 deletions(-) >> > >> > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c >> > index c0e5c10..de30e15 100644 >> > --- a/drivers/clk/sunxi-ng/ccu_div.c >> > +++ b/drivers/clk/sunxi-ng/ccu_div.c >> >> Missing handling of fixed_post_div in ccu_div_round_rate. >> ccu_div_round_rate should multiply the rate by the postdiv before >> looking up the divider using divider_get_val and divide val by postdiv >> just before returning. >> Ignore the above comment, my branch is out of date. >> > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, >> > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, >> > parent_rate); >> > >> > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, >> > - cd->div.flags); >> > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, >> > + cd->div.flags); >> > + >> > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) >> > + val /= cd->fixed_post_div; >> > + >> > + return val; >> > } >> > >> > static int ccu_div_determine_rate(struct clk_hw *hw, >> >> > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, >> > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, >> > cd->div.flags); >> > >> > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) >> > + val *= cd->fixed_post_div; >> > + >> > spin_lock_irqsave(cd->common.lock, flags); >> > >> > reg = readl(cd->common.base + cd->common.reg); >> >> val here is the divider value that is stored in the clock register >> field not the actual rate so this is incorrect. Instead the rate needs >> to be multiplied by postdiv just before divider_get_val. > > OK, thanks, this one I wasn't really sure about. > Please do fix setting the rate though. >> >> > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h >> > index 08d0744..f3a5028 100644 >> > --- a/drivers/clk/sunxi-ng/ccu_div.h >> > +++ b/drivers/clk/sunxi-ng/ccu_div.h >> > @@ -86,9 +86,10 @@ struct ccu_div_internal { >> > struct ccu_div { >> > u32 enable; >> > >> > - struct ccu_div_internal div; >> > + struct ccu_div_internal div; >> > struct ccu_mux_internal mux; >> > struct ccu_common common; >> > + unsigned int fixed_post_div; >> > }; >> > >> > #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \ >> > -- >> > git-series 0.9.1 >> >> Thanks. >> >> Regards, >> Jonathan Regards, Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi! On Sun, Jun 25, 2017 at 11:45:42PM +0300, Priit Laes wrote: > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where > 6 is fixed post-divider. > > Signed-off-by: Priit Laes <plaes@plaes.org> > --- > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- > 2 files changed, 12 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c > index c0e5c10..de30e15 100644 > --- a/drivers/clk/sunxi-ng/ccu_div.c > +++ b/drivers/clk/sunxi-ng/ccu_div.c > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, > parent_rate); > > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, > - cd->div.flags); > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, > + cd->div.flags); > + > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > + val /= cd->fixed_post_div; > + > + return val; > } > > static int ccu_div_determine_rate(struct clk_hw *hw, > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, > cd->div.flags); > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > + val *= cd->fixed_post_div; > + > spin_lock_irqsave(cd->common.lock, flags); > > reg = readl(cd->common.base + cd->common.reg); You also need to adjust the round rate call back to take into account the post divider before calling divider_round_rate_parent, and after since that function can modify the parent_rate. > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h > index 08d0744..f3a5028 100644 > --- a/drivers/clk/sunxi-ng/ccu_div.h > +++ b/drivers/clk/sunxi-ng/ccu_div.h > @@ -86,9 +86,10 @@ struct ccu_div_internal { > struct ccu_div { > u32 enable; > > - struct ccu_div_internal div; > + struct ccu_div_internal div; Spurious change? Thanks! Maxime
On Tue, Jun 27, 2017 at 11:46:07AM +0200, Maxime Ripard wrote: > Hi! > > On Sun, Jun 25, 2017 at 11:45:42PM +0300, Priit Laes wrote: > > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where > > 6 is fixed post-divider. > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > --- > > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- > > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- > > 2 files changed, 12 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c > > index c0e5c10..de30e15 100644 > > --- a/drivers/clk/sunxi-ng/ccu_div.c > > +++ b/drivers/clk/sunxi-ng/ccu_div.c > > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, > > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, > > parent_rate); > > > > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > - cd->div.flags); > > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > + cd->div.flags); > > + > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > + val /= cd->fixed_post_div; > > + > > + return val; > > } > > > > static int ccu_div_determine_rate(struct clk_hw *hw, > > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, > > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, > > cd->div.flags); > > > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > + val *= cd->fixed_post_div; > > + > > spin_lock_irqsave(cd->common.lock, flags); > > > > reg = readl(cd->common.base + cd->common.reg); > > You also need to adjust the round rate call back to take into account > the post divider before calling divider_round_rate_parent, and after > since that function can modify the parent_rate. Is there a way to trigger this function? I don't see it getting called. > > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h > > index 08d0744..f3a5028 100644 > > --- a/drivers/clk/sunxi-ng/ccu_div.h > > +++ b/drivers/clk/sunxi-ng/ccu_div.h > > @@ -86,9 +86,10 @@ struct ccu_div_internal { > > struct ccu_div { > > u32 enable; > > > > - struct ccu_div_internal div; > > + struct ccu_div_internal div; > > Spurious change? Nope, it was not indented the same way as other variables. Should I send it as separate patch? > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 28, 2017 at 05:59:49PM +0000, Priit Laes wrote: > On Tue, Jun 27, 2017 at 11:46:07AM +0200, Maxime Ripard wrote: > > Hi! > > > > On Sun, Jun 25, 2017 at 11:45:42PM +0300, Priit Laes wrote: > > > SATA clock on sun4i/sun7i is of type (parent) / M / 6 where > > > 6 is fixed post-divider. > > > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > > --- > > > drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- > > > drivers/clk/sunxi-ng/ccu_div.h | 3 ++- > > > 2 files changed, 12 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c > > > index c0e5c10..de30e15 100644 > > > --- a/drivers/clk/sunxi-ng/ccu_div.c > > > +++ b/drivers/clk/sunxi-ng/ccu_div.c > > > @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, > > > parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, > > > parent_rate); > > > > > > - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > > - cd->div.flags); > > > + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, > > > + cd->div.flags); > > > + > > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > > + val /= cd->fixed_post_div; > > > + > > > + return val; > > > } > > > > > > static int ccu_div_determine_rate(struct clk_hw *hw, > > > @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, > > > val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, > > > cd->div.flags); > > > > > > + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) > > > + val *= cd->fixed_post_div; > > > + > > > spin_lock_irqsave(cd->common.lock, flags); > > > > > > reg = readl(cd->common.base + cd->common.reg); > > > > You also need to adjust the round rate call back to take into account > > the post divider before calling divider_round_rate_parent, and after > > since that function can modify the parent_rate. > > Is there a way to trigger this function? I don't see it getting called. yep, clk_round_rate will call it, and it's also in the code path of clk_set_rate. > > > diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h > > > index 08d0744..f3a5028 100644 > > > --- a/drivers/clk/sunxi-ng/ccu_div.h > > > +++ b/drivers/clk/sunxi-ng/ccu_div.h > > > @@ -86,9 +86,10 @@ struct ccu_div_internal { > > > struct ccu_div { > > > u32 enable; > > > > > > - struct ccu_div_internal div; > > > + struct ccu_div_internal div; > > > > Spurious change? > > Nope, it was not indented the same way as other variables. > Should I send it as separate patch? Hmmm, not really, leave it there. Thanks! Maxime
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c index c0e5c10..de30e15 100644 --- a/drivers/clk/sunxi-ng/ccu_div.c +++ b/drivers/clk/sunxi-ng/ccu_div.c @@ -62,8 +62,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw, parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1, parent_rate); - return divider_recalc_rate(hw, parent_rate, val, cd->div.table, - cd->div.flags); + val = divider_recalc_rate(hw, parent_rate, val, cd->div.table, + cd->div.flags); + + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) + val /= cd->fixed_post_div; + + return val; } static int ccu_div_determine_rate(struct clk_hw *hw, @@ -89,6 +94,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate, val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width, cd->div.flags); + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV) + val *= cd->fixed_post_div; + spin_lock_irqsave(cd->common.lock, flags); reg = readl(cd->common.base + cd->common.reg); diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h index 08d0744..f3a5028 100644 --- a/drivers/clk/sunxi-ng/ccu_div.h +++ b/drivers/clk/sunxi-ng/ccu_div.h @@ -86,9 +86,10 @@ struct ccu_div_internal { struct ccu_div { u32 enable; - struct ccu_div_internal div; + struct ccu_div_internal div; struct ccu_mux_internal mux; struct ccu_common common; + unsigned int fixed_post_div; }; #define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where 6 is fixed post-divider. Signed-off-by: Priit Laes <plaes@plaes.org> --- drivers/clk/sunxi-ng/ccu_div.c | 12 ++++++++++-- drivers/clk/sunxi-ng/ccu_div.h | 3 ++- 2 files changed, 12 insertions(+), 3 deletions(-)