| Message ID | 2677722.OnHOCzR3UZ@aspire.rjw.lan (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Friday, June 23, 2017 02:58:11 PM Rafael J. Wysocki wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > pci_target_state() calls device_may_wakeup() which checks whether > or not the device may wake up the system from sleep states, but > pci_target_state() is used for runtime PM too. > > Since runtime PM is expected to always enable remote wakeup if > possible, modify pci_target_state() to take additional argument > indicating whether or not it should look for a state from which > the device can signal wakeup and pass either the return value > of device_can_wakeup(), or "false" (if the device itself is not > wakeup-capable) to it from the code related to runtime PM. > > While at it, fix the comment in pci_dev_run_wake() which is not > about sleep states. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > > -> v2: > > Passing "true" as the second argument to pci_target_state() for runtime PM > might trigger suboptimal state choices to be made, so pass the return value > of device_can_wakeup() to it instead and pass "false" to it in pci_dev_run_wake(), > because that assumes device_can_wakeup() to return "false" already. This was sent a week ago without any response so far. Any concerns? > --- > drivers/pci/pci.c | 22 +++++++++++++--------- > 1 file changed, 13 insertions(+), 9 deletions(-) > > Index: linux-pm/drivers/pci/pci.c > =================================================================== > --- linux-pm.orig/drivers/pci/pci.c > +++ linux-pm/drivers/pci/pci.c > @@ -1982,12 +1982,13 @@ EXPORT_SYMBOL(pci_wake_from_d3); > /** > * pci_target_state - find an appropriate low power state for a given PCI dev > * @dev: PCI device > + * @wakeup: Whether or not wakeup functionality will be enabled for the device. > * > * Use underlying platform code to find a supported low power state for @dev. > * If the platform can't manage @dev, return the deepest state from which it > * can generate wake events, based on any available PME info. > */ > -static pci_power_t pci_target_state(struct pci_dev *dev) > +static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup) > { > pci_power_t target_state = PCI_D3hot; > > @@ -2024,7 +2025,7 @@ static pci_power_t pci_target_state(stru > if (dev->current_state == PCI_D3cold) > target_state = PCI_D3cold; > > - if (device_may_wakeup(&dev->dev)) { > + if (wakeup) { > /* > * Find the deepest state from which the device can generate > * wake-up events, make it the target state and enable device > @@ -2050,13 +2051,14 @@ static pci_power_t pci_target_state(stru > */ > int pci_prepare_to_sleep(struct pci_dev *dev) > { > - pci_power_t target_state = pci_target_state(dev); > + bool wakeup = device_may_wakeup(&dev->dev); > + pci_power_t target_state = pci_target_state(dev, wakeup); > int error; > > if (target_state == PCI_POWER_ERROR) > return -EIO; > > - pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); > + pci_enable_wake(dev, target_state, wakeup); > > error = pci_set_power_state(dev, target_state); > > @@ -2089,9 +2091,10 @@ EXPORT_SYMBOL(pci_back_from_sleep); > */ > int pci_finish_runtime_suspend(struct pci_dev *dev) > { > - pci_power_t target_state = pci_target_state(dev); > + pci_power_t target_state; > int error; > > + target_state = pci_target_state(dev, device_can_wakeup(&dev->dev)); > if (target_state == PCI_POWER_ERROR) > return -EIO; > > @@ -2127,8 +2130,8 @@ bool pci_dev_run_wake(struct pci_dev *de > if (!dev->pme_support) > return false; > > - /* PME-capable in principle, but not from the intended sleep state */ > - if (!pci_pme_capable(dev, pci_target_state(dev))) > + /* PME-capable in principle, but not from the target power state */ > + if (!pci_pme_capable(dev, pci_target_state(dev, false))) > return false; > > while (bus->parent) { > @@ -2163,9 +2166,10 @@ EXPORT_SYMBOL_GPL(pci_dev_run_wake); > bool pci_dev_keep_suspended(struct pci_dev *pci_dev) > { > struct device *dev = &pci_dev->dev; > + bool wakeup = device_may_wakeup(dev); > > if (!pm_runtime_suspended(dev) > - || pci_target_state(pci_dev) != pci_dev->current_state > + || pci_target_state(pci_dev, wakeup) != pci_dev->current_state > || platform_pci_need_resume(pci_dev) > || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME)) > return false; > @@ -2183,7 +2187,7 @@ bool pci_dev_keep_suspended(struct pci_d > spin_lock_irq(&dev->power.lock); > > if (pm_runtime_suspended(dev) && pci_dev->current_state < PCI_D3cold && > - !device_may_wakeup(dev)) > + !wakeup) > __pci_pme_active(pci_dev, false); > > spin_unlock_irq(&dev->power.lock); >
On Fri, Jun 30, 2017 at 12:37:00AM +0200, Rafael J. Wysocki wrote: > On Friday, June 23, 2017 02:58:11 PM Rafael J. Wysocki wrote: > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > pci_target_state() calls device_may_wakeup() which checks whether > > or not the device may wake up the system from sleep states, but > > pci_target_state() is used for runtime PM too. > > > > Since runtime PM is expected to always enable remote wakeup if > > possible, modify pci_target_state() to take additional argument > > indicating whether or not it should look for a state from which > > the device can signal wakeup and pass either the return value > > of device_can_wakeup(), or "false" (if the device itself is not > > wakeup-capable) to it from the code related to runtime PM. > > > > While at it, fix the comment in pci_dev_run_wake() which is not > > about sleep states. > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > --- > > > > -> v2: > > > > Passing "true" as the second argument to pci_target_state() for runtime PM > > might trigger suboptimal state choices to be made, so pass the return value > > of device_can_wakeup() to it instead and pass "false" to it in pci_dev_run_wake(), > > because that assumes device_can_wakeup() to return "false" already. > > This was sent a week ago without any response so far. > > Any concerns? No concerns from me. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
On Fri, Jun 23, 2017 at 02:58:11PM +0200, Rafael J. Wysocki wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > pci_target_state() calls device_may_wakeup() which checks whether > or not the device may wake up the system from sleep states, but > pci_target_state() is used for runtime PM too. > > Since runtime PM is expected to always enable remote wakeup if > possible, modify pci_target_state() to take additional argument > indicating whether or not it should look for a state from which > the device can signal wakeup and pass either the return value > of device_can_wakeup(), or "false" (if the device itself is not > wakeup-capable) to it from the code related to runtime PM. > > While at it, fix the comment in pci_dev_run_wake() which is not > about sleep states. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Applied with Mika's reviewed-by to pci/pm for v4.13, thanks! > --- > > -> v2: > > Passing "true" as the second argument to pci_target_state() for runtime PM > might trigger suboptimal state choices to be made, so pass the return value > of device_can_wakeup() to it instead and pass "false" to it in pci_dev_run_wake(), > because that assumes device_can_wakeup() to return "false" already. > > --- > drivers/pci/pci.c | 22 +++++++++++++--------- > 1 file changed, 13 insertions(+), 9 deletions(-) > > Index: linux-pm/drivers/pci/pci.c > =================================================================== > --- linux-pm.orig/drivers/pci/pci.c > +++ linux-pm/drivers/pci/pci.c > @@ -1982,12 +1982,13 @@ EXPORT_SYMBOL(pci_wake_from_d3); > /** > * pci_target_state - find an appropriate low power state for a given PCI dev > * @dev: PCI device > + * @wakeup: Whether or not wakeup functionality will be enabled for the device. > * > * Use underlying platform code to find a supported low power state for @dev. > * If the platform can't manage @dev, return the deepest state from which it > * can generate wake events, based on any available PME info. > */ > -static pci_power_t pci_target_state(struct pci_dev *dev) > +static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup) > { > pci_power_t target_state = PCI_D3hot; > > @@ -2024,7 +2025,7 @@ static pci_power_t pci_target_state(stru > if (dev->current_state == PCI_D3cold) > target_state = PCI_D3cold; > > - if (device_may_wakeup(&dev->dev)) { > + if (wakeup) { > /* > * Find the deepest state from which the device can generate > * wake-up events, make it the target state and enable device > @@ -2050,13 +2051,14 @@ static pci_power_t pci_target_state(stru > */ > int pci_prepare_to_sleep(struct pci_dev *dev) > { > - pci_power_t target_state = pci_target_state(dev); > + bool wakeup = device_may_wakeup(&dev->dev); > + pci_power_t target_state = pci_target_state(dev, wakeup); > int error; > > if (target_state == PCI_POWER_ERROR) > return -EIO; > > - pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); > + pci_enable_wake(dev, target_state, wakeup); > > error = pci_set_power_state(dev, target_state); > > @@ -2089,9 +2091,10 @@ EXPORT_SYMBOL(pci_back_from_sleep); > */ > int pci_finish_runtime_suspend(struct pci_dev *dev) > { > - pci_power_t target_state = pci_target_state(dev); > + pci_power_t target_state; > int error; > > + target_state = pci_target_state(dev, device_can_wakeup(&dev->dev)); > if (target_state == PCI_POWER_ERROR) > return -EIO; > > @@ -2127,8 +2130,8 @@ bool pci_dev_run_wake(struct pci_dev *de > if (!dev->pme_support) > return false; > > - /* PME-capable in principle, but not from the intended sleep state */ > - if (!pci_pme_capable(dev, pci_target_state(dev))) > + /* PME-capable in principle, but not from the target power state */ > + if (!pci_pme_capable(dev, pci_target_state(dev, false))) > return false; > > while (bus->parent) { > @@ -2163,9 +2166,10 @@ EXPORT_SYMBOL_GPL(pci_dev_run_wake); > bool pci_dev_keep_suspended(struct pci_dev *pci_dev) > { > struct device *dev = &pci_dev->dev; > + bool wakeup = device_may_wakeup(dev); > > if (!pm_runtime_suspended(dev) > - || pci_target_state(pci_dev) != pci_dev->current_state > + || pci_target_state(pci_dev, wakeup) != pci_dev->current_state > || platform_pci_need_resume(pci_dev) > || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME)) > return false; > @@ -2183,7 +2187,7 @@ bool pci_dev_keep_suspended(struct pci_d > spin_lock_irq(&dev->power.lock); > > if (pm_runtime_suspended(dev) && pci_dev->current_state < PCI_D3cold && > - !device_may_wakeup(dev)) > + !wakeup) > __pci_pme_active(pci_dev, false); > > spin_unlock_irq(&dev->power.lock); >
Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1982,12 +1982,13 @@ EXPORT_SYMBOL(pci_wake_from_d3); /** * pci_target_state - find an appropriate low power state for a given PCI dev * @dev: PCI device + * @wakeup: Whether or not wakeup functionality will be enabled for the device. * * Use underlying platform code to find a supported low power state for @dev. * If the platform can't manage @dev, return the deepest state from which it * can generate wake events, based on any available PME info. */ -static pci_power_t pci_target_state(struct pci_dev *dev) +static pci_power_t pci_target_state(struct pci_dev *dev, bool wakeup) { pci_power_t target_state = PCI_D3hot; @@ -2024,7 +2025,7 @@ static pci_power_t pci_target_state(stru if (dev->current_state == PCI_D3cold) target_state = PCI_D3cold; - if (device_may_wakeup(&dev->dev)) { + if (wakeup) { /* * Find the deepest state from which the device can generate * wake-up events, make it the target state and enable device @@ -2050,13 +2051,14 @@ static pci_power_t pci_target_state(stru */ int pci_prepare_to_sleep(struct pci_dev *dev) { - pci_power_t target_state = pci_target_state(dev); + bool wakeup = device_may_wakeup(&dev->dev); + pci_power_t target_state = pci_target_state(dev, wakeup); int error; if (target_state == PCI_POWER_ERROR) return -EIO; - pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); + pci_enable_wake(dev, target_state, wakeup); error = pci_set_power_state(dev, target_state); @@ -2089,9 +2091,10 @@ EXPORT_SYMBOL(pci_back_from_sleep); */ int pci_finish_runtime_suspend(struct pci_dev *dev) { - pci_power_t target_state = pci_target_state(dev); + pci_power_t target_state; int error; + target_state = pci_target_state(dev, device_can_wakeup(&dev->dev)); if (target_state == PCI_POWER_ERROR) return -EIO; @@ -2127,8 +2130,8 @@ bool pci_dev_run_wake(struct pci_dev *de if (!dev->pme_support) return false; - /* PME-capable in principle, but not from the intended sleep state */ - if (!pci_pme_capable(dev, pci_target_state(dev))) + /* PME-capable in principle, but not from the target power state */ + if (!pci_pme_capable(dev, pci_target_state(dev, false))) return false; while (bus->parent) { @@ -2163,9 +2166,10 @@ EXPORT_SYMBOL_GPL(pci_dev_run_wake); bool pci_dev_keep_suspended(struct pci_dev *pci_dev) { struct device *dev = &pci_dev->dev; + bool wakeup = device_may_wakeup(dev); if (!pm_runtime_suspended(dev) - || pci_target_state(pci_dev) != pci_dev->current_state + || pci_target_state(pci_dev, wakeup) != pci_dev->current_state || platform_pci_need_resume(pci_dev) || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME)) return false; @@ -2183,7 +2187,7 @@ bool pci_dev_keep_suspended(struct pci_d spin_lock_irq(&dev->power.lock); if (pm_runtime_suspended(dev) && pci_dev->current_state < PCI_D3cold && - !device_may_wakeup(dev)) + !wakeup) __pci_pme_active(pci_dev, false); spin_unlock_irq(&dev->power.lock);