Message ID | 20170629052514.12560-1-vigneshr@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 6/29/2017 12:25 AM, Vignesh R wrote: > commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to > get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to > dwc3_core_init() after dwc3_core_soft_reset(). But > dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy() > needs to be called before dwc3_core_soft_reset(). > > Fix this by moving call to dwc3_core_get_phy() before > dwc3_core_soft_reset(). > > This fixes the following abort seen on DRA7xx platforms > [ 24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto > [ 24.781144] hub 2-0:1.0: USB hub found > [ 24.787836] hub 2-0:1.0: 1 port detected > [ 24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > > Reported-by: Carlos Hernandez <ceh@ti.com> > Signed-off-by: Vignesh R <vigneshr@ti.com> > --- Could this be picked up for -rc1, so that we have a booting kernel for dra7 platform? Or is this planned for -rc2? > drivers/usb/dwc3/core.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 326b302fc440..03474d3575ab 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc) > dwc->maximum_speed = USB_SPEED_HIGH; > } > > - ret = dwc3_core_soft_reset(dwc); > + ret = dwc3_core_get_phy(dwc); > if (ret) > goto err0; > > - ret = dwc3_phy_setup(dwc); > + ret = dwc3_core_soft_reset(dwc); > if (ret) > goto err0; > > - ret = dwc3_core_get_phy(dwc); > + ret = dwc3_phy_setup(dwc); > if (ret) > goto err0; > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 326b302fc440..03474d3575ab 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_soft_reset(dwc); + ret = dwc3_core_get_phy(dwc); if (ret) goto err0; - ret = dwc3_phy_setup(dwc); + ret = dwc3_core_soft_reset(dwc); if (ret) goto err0; - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0;
commit f54edb539c116 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") moved call to dwc3_core_get_phy() from dwc3_probe() to dwc3_core_init() after dwc3_core_soft_reset(). But dwc3_core_soft_reset() calls phy_init(), therefore dwc3_core_get_phy() needs to be called before dwc3_core_soft_reset(). Fix this by moving call to dwc3_core_get_phy() before dwc3_core_soft_reset(). This fixes the following abort seen on DRA7xx platforms [ 24.769118] usb usb2: SerialNumber: xhci-hcd.1.auto [ 24.781144] hub 2-0:1.0: USB hub found [ 24.787836] hub 2-0:1.0: 1 port detected [ 24.809939] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/usb/dwc3/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)