| Message ID | 1499670369-44143-4-git-send-email-wangyijing@huawei.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
On 07/10/2017 09:06 AM, Yijing Wang wrote: > Now all libsas works are queued to scsi host workqueue, > include sas event work post by LLDD and sas discovery > work, and a sas hotplug flow may be divided into several > works, e.g libsas receive a PORTE_BYTES_DMAED event, > now we process it as following steps: > sas_form_port --- run in work in shot workq > sas_discover_domain --- run in another work in shost workq > ... > sas_probe_devices --- run in new work in shost workq > We found during hot-add a device, libsas may need run several > works in same workqueue to add device in system, the process is > not atomic, it may interrupt by other sas event works, like > PHYE_LOSS_OF_SIGNAL. Finally, we would found lots unexpected > errors. This patch is preparation of execute libsas sas event > in sync. > > Signed-off-by: Yijing Wang <wangyijing@huawei.com> > CC: John Garry <john.garry@huawei.com> > CC: Johannes Thumshirn <jthumshirn@suse.de> > CC: Ewan Milne <emilne@redhat.com> > CC: Christoph Hellwig <hch@lst.de> > CC: Tomas Henzl <thenzl@redhat.com> > CC: Dan Williams <dan.j.williams@intel.com> > --- > drivers/scsi/libsas/sas_event.c | 4 ++-- > drivers/scsi/libsas/sas_init.c | 7 +++++++ > include/scsi/libsas.h | 1 + > 3 files changed, 10 insertions(+), 2 deletions(-) > Reviewed-by: Hannes Reinecke <hare@suse.com> Cheers, Hannes
diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index a1370bd..a72a089 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -46,7 +46,7 @@ int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw) if (list_empty(&sw->drain_node)) list_add(&sw->drain_node, &ha->defer_q); } else - rc = scsi_queue_work(ha->core.shost, &sw->work); + rc = queue_work(ha->event_q, &sw->work); return rc; } @@ -69,7 +69,7 @@ void __sas_drain_work(struct sas_ha_struct *ha) { int ret; unsigned long flags; - struct workqueue_struct *wq = ha->core.shost->work_q; + struct workqueue_struct *wq = ha->event_q; struct sas_work *sw, *_sw; set_bit(SAS_HA_DRAINING, &ha->state); diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index c227a8b..2f3b736 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -115,6 +115,7 @@ void sas_hae_reset(struct work_struct *work) int sas_register_ha(struct sas_ha_struct *sas_ha) { + char name[64]; int error = 0; mutex_init(&sas_ha->disco_mutex); @@ -146,6 +147,11 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) goto Undo_ports; } + snprintf(name, 64, "%s_event_q", dev_name(sas_ha->dev)); + sas_ha->event_q = create_singlethread_workqueue(name); + if (!sas_ha->event_q) + goto Undo_ports; + INIT_LIST_HEAD(&sas_ha->eh_done_q); INIT_LIST_HEAD(&sas_ha->eh_ata_q); @@ -180,6 +186,7 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha) mutex_lock(&sas_ha->drain_mutex); __sas_drain_work(sas_ha); mutex_unlock(&sas_ha->drain_mutex); + destroy_workqueue(sas_ha->event_q); return 0; } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 628f48b..a01ca42 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -402,6 +402,7 @@ struct sas_ha_struct { char *sas_ha_name; struct device *dev; /* should be set */ struct module *lldd_module; /* should be set */ + struct workqueue_struct *event_q; u8 *sas_addr; /* must be set */ u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
Now all libsas works are queued to scsi host workqueue, include sas event work post by LLDD and sas discovery work, and a sas hotplug flow may be divided into several works, e.g libsas receive a PORTE_BYTES_DMAED event, now we process it as following steps: sas_form_port --- run in work in shot workq sas_discover_domain --- run in another work in shost workq ... sas_probe_devices --- run in new work in shost workq We found during hot-add a device, libsas may need run several works in same workqueue to add device in system, the process is not atomic, it may interrupt by other sas event works, like PHYE_LOSS_OF_SIGNAL. Finally, we would found lots unexpected errors. This patch is preparation of execute libsas sas event in sync. Signed-off-by: Yijing Wang <wangyijing@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> --- drivers/scsi/libsas/sas_event.c | 4 ++-- drivers/scsi/libsas/sas_init.c | 7 +++++++ include/scsi/libsas.h | 1 + 3 files changed, 10 insertions(+), 2 deletions(-)