| Message ID | 20170715124753.43714-2-hverkuil@xs4all.nl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Jul 15, 2017 at 02:47:50PM +0200, Hans Verkuil wrote: > From: Hans Verkuil <hans.verkuil@cisco.com> > > This documents the binding for the Tegra CEC module. > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > --- > .../devicetree/bindings/media/tegra-cec.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/tegra-cec.txt > > diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt > new file mode 100644 > index 000000000000..ba0b6071acaa > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt > @@ -0,0 +1,26 @@ > +* Tegra HDMI CEC driver Bindings are for h/w, not drivers... > +The HDMI CEC module is present in Tegra SoCs and its purpose is to > +handle communication between HDMI connected devices over the CEC bus. > + > +Required properties: > + - compatible : value should be one of the following: > + "nvidia,tegra114-cec" > + "nvidia,tegra124-cec" > + "nvidia,tegra210-cec" > + - reg : Physical base address of the IP registers and length of memory > + mapped region. > + - interrupts : HDMI CEC interrupt number to the CPU. > + - clocks : from common clock binding: handle to HDMI CEC clock. > + - clock-names : from common clock binding: must contain "cec", > + corresponding to ithe entry in the clocks property. s/ithe/the/ > + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. > + > +Example: > + > +tegra_cec { cec@70015000 > + compatible = "nvidia,tegra124-cec"; > + reg = <0x0 0x70015000 0x0 0x00001000>; > + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&tegra_car TEGRA124_CLK_CEC>; > + clock-names = "cec"; > -- > 2.11.0 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 000000000000..ba0b6071acaa --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,26 @@ +* Tegra HDMI CEC driver + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to ithe entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +tegra_cec { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec";