| Message ID | 20170718214339.7774-34-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 18/07/2017 at 16:43:14 -0500, Rob Herring wrote: > Now that we have a custom printf format specifier, convert users of > full_name to use %pOF instead. This is preparation to remove storing > of the full path string for each node. > > Signed-off-by: Rob Herring <robh@kernel.org> > Cc: Nicolas Ferre <nicolas.ferre@microchip.com> > Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Cc: Roger Quadros <rogerq@ti.com> > Cc: Tony Lindgren <tony@atomide.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-omap@vger.kernel.org Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > --- > drivers/memory/atmel-ebi.c | 17 ++++++++--------- > drivers/memory/jz4780-nemc.c | 12 ++++++------ > drivers/memory/mvebu-devbus.c | 12 ++++++------ > drivers/memory/omap-gpmc.c | 18 +++++++++--------- > 4 files changed, 29 insertions(+), 30 deletions(-) > > diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c > index 99e644cda4d1..597282e35c69 100644 > --- a/drivers/memory/atmel-ebi.c > +++ b/drivers/memory/atmel-ebi.c > @@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, > out: > if (ret) { > dev_err(ebid->ebi->dev, > - "missing or invalid timings definition in %s", > - np->full_name); > + "missing or invalid timings definition in %pOF", > + np); > return ret; > } > > @@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, > return -EINVAL; > > if ((ret > 0 && !required) || (!ret && required)) { > - dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s", > - np->full_name); > + dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", > + np); > return -EINVAL; > } > > @@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, > > if (cs >= AT91_MATRIX_EBI_NUM_CS || > !(ebi->caps->available_cs & BIT(cs))) { > - dev_err(dev, "invalid reg property in %s\n", > - np->full_name); > + dev_err(dev, "invalid reg property in %pOF\n", np); > return -EINVAL; > } > > @@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, > } > > if (!numcs) { > - dev_err(dev, "invalid reg property in %s\n", np->full_name); > + dev_err(dev, "invalid reg property in %pOF\n", np); > return -EINVAL; > } > > @@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev) > > ret = atmel_ebi_dev_setup(ebi, child, reg_cells); > if (ret) { > - dev_err(dev, "failed to configure EBI bus for %s, disabling the device", > - child->full_name); > + dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", > + child); > > ret = atmel_ebi_dev_disable(ebi, child); > if (ret) > diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c > index 919d1925acb9..bcf06adefc96 100644 > --- a/drivers/memory/jz4780-nemc.c > +++ b/drivers/memory/jz4780-nemc.c > @@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev) > bank = of_read_number(prop, 1); > if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) { > dev_err(nemc->dev, > - "%s requests invalid bank %u\n", > - child->full_name, bank); > + "%pOF requests invalid bank %u\n", > + child, bank); > > /* Will continue the outer loop below. */ > referenced = 0; > @@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev) > } > > if (!referenced) { > - dev_err(nemc->dev, "%s has no addresses\n", > - child->full_name); > + dev_err(nemc->dev, "%pOF has no addresses\n", > + child); > continue; > } else if (nemc->banks_present & referenced) { > - dev_err(nemc->dev, "%s conflicts with another node\n", > - child->full_name); > + dev_err(nemc->dev, "%pOF conflicts with another node\n", > + child); > continue; > } > > diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c > index 24852812fd44..981860879d02 100644 > --- a/drivers/memory/mvebu-devbus.c > +++ b/drivers/memory/mvebu-devbus.c > @@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus, > > err = of_property_read_u32(node, name, &time_ps); > if (err < 0) { > - dev_err(devbus->dev, "%s has no '%s' property\n", > - name, node->full_name); > + dev_err(devbus->dev, "%pOF has no '%s' property\n", > + node, name); > return err; > } > > @@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus, > err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width); > if (err < 0) { > dev_err(devbus->dev, > - "%s has no 'devbus,bus-width' property\n", > - node->full_name); > + "%pOF has no 'devbus,bus-width' property\n", > + node); > return err; > } > > @@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus, > &w->sync_enable); > if (err < 0) { > dev_err(devbus->dev, > - "%s has no 'devbus,sync-enable' property\n", > - node->full_name); > + "%pOF has no 'devbus,sync-enable' property\n", > + node); > return err; > } > } > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c > index a80e17de906d..f7f393541934 100644 > --- a/drivers/memory/omap-gpmc.c > +++ b/drivers/memory/omap-gpmc.c > @@ -960,7 +960,7 @@ static int gpmc_cs_remap(int cs, u32 base) > * Make sure we ignore any device offsets from the GPMC partition > * allocated for the chip select and that the new base confirms > * to the GPMC 16MB minimum granularity. > - */ > + */ > base &= ~(SZ_16M - 1); > > gpmc_cs_get_memconf(cs, &old_base, &size); > @@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, > struct omap_onenand_platform_data *gpmc_onenand_data; > > if (of_property_read_u32(child, "reg", &val) < 0) { > - dev_err(&pdev->dev, "%s has no 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", > + child); > return -ENODEV; > } > > @@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, > struct gpmc_device *gpmc = platform_get_drvdata(pdev); > > if (of_property_read_u32(child, "reg", &cs) < 0) { > - dev_err(&pdev->dev, "%s has no 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", > + child); > return -ENODEV; > } > > if (of_address_to_resource(child, 0, &res) < 0) { > - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n", > + child); > return -ENODEV; > } > > @@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, > ret = of_property_read_u32(child, "bank-width", > &gpmc_s.device_width); > if (ret < 0) { > - dev_err(&pdev->dev, "%s has no 'bank-width' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n", > + child); > goto err; > } > } > -- > 2.11.0 >
On Wed, Jul 19, 2017 at 12:47 AM, Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote: > On 18/07/2017 at 16:43:14 -0500, Rob Herring wrote: >> Now that we have a custom printf format specifier, convert users of >> full_name to use %pOF instead. This is preparation to remove storing >> of the full path string for each node. >> >> Signed-off-by: Rob Herring <robh@kernel.org> >> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> >> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> >> Cc: Roger Quadros <rogerq@ti.com> >> Cc: Tony Lindgren <tony@atomide.com> >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: linux-omap@vger.kernel.org > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> This can go through subsystem tree. Who normally takes drivers/memory/ changes? arm-soc? Rob
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki On 19/07/17 00:43, Rob Herring wrote: > Now that we have a custom printf format specifier, convert users of > full_name to use %pOF instead. This is preparation to remove storing > of the full path string for each node. > > Signed-off-by: Rob Herring <robh@kernel.org> > Cc: Nicolas Ferre <nicolas.ferre@microchip.com> > Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Cc: Roger Quadros <rogerq@ti.com> > Cc: Tony Lindgren <tony@atomide.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-omap@vger.kernel.org > --- > drivers/memory/atmel-ebi.c | 17 ++++++++--------- > drivers/memory/jz4780-nemc.c | 12 ++++++------ > drivers/memory/mvebu-devbus.c | 12 ++++++------ > drivers/memory/omap-gpmc.c | 18 +++++++++--------- > 4 files changed, 29 insertions(+), 30 deletions(-) for omap-gpmc.c Acked-by: Roger Quadros <rogerq@ti.com> > > diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c > index 99e644cda4d1..597282e35c69 100644 > --- a/drivers/memory/atmel-ebi.c > +++ b/drivers/memory/atmel-ebi.c > @@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, > out: > if (ret) { > dev_err(ebid->ebi->dev, > - "missing or invalid timings definition in %s", > - np->full_name); > + "missing or invalid timings definition in %pOF", > + np); > return ret; > } > > @@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, > return -EINVAL; > > if ((ret > 0 && !required) || (!ret && required)) { > - dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s", > - np->full_name); > + dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", > + np); > return -EINVAL; > } > > @@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, > > if (cs >= AT91_MATRIX_EBI_NUM_CS || > !(ebi->caps->available_cs & BIT(cs))) { > - dev_err(dev, "invalid reg property in %s\n", > - np->full_name); > + dev_err(dev, "invalid reg property in %pOF\n", np); > return -EINVAL; > } > > @@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, > } > > if (!numcs) { > - dev_err(dev, "invalid reg property in %s\n", np->full_name); > + dev_err(dev, "invalid reg property in %pOF\n", np); > return -EINVAL; > } > > @@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev) > > ret = atmel_ebi_dev_setup(ebi, child, reg_cells); > if (ret) { > - dev_err(dev, "failed to configure EBI bus for %s, disabling the device", > - child->full_name); > + dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", > + child); > > ret = atmel_ebi_dev_disable(ebi, child); > if (ret) > diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c > index 919d1925acb9..bcf06adefc96 100644 > --- a/drivers/memory/jz4780-nemc.c > +++ b/drivers/memory/jz4780-nemc.c > @@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev) > bank = of_read_number(prop, 1); > if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) { > dev_err(nemc->dev, > - "%s requests invalid bank %u\n", > - child->full_name, bank); > + "%pOF requests invalid bank %u\n", > + child, bank); > > /* Will continue the outer loop below. */ > referenced = 0; > @@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev) > } > > if (!referenced) { > - dev_err(nemc->dev, "%s has no addresses\n", > - child->full_name); > + dev_err(nemc->dev, "%pOF has no addresses\n", > + child); > continue; > } else if (nemc->banks_present & referenced) { > - dev_err(nemc->dev, "%s conflicts with another node\n", > - child->full_name); > + dev_err(nemc->dev, "%pOF conflicts with another node\n", > + child); > continue; > } > > diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c > index 24852812fd44..981860879d02 100644 > --- a/drivers/memory/mvebu-devbus.c > +++ b/drivers/memory/mvebu-devbus.c > @@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus, > > err = of_property_read_u32(node, name, &time_ps); > if (err < 0) { > - dev_err(devbus->dev, "%s has no '%s' property\n", > - name, node->full_name); > + dev_err(devbus->dev, "%pOF has no '%s' property\n", > + node, name); > return err; > } > > @@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus, > err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width); > if (err < 0) { > dev_err(devbus->dev, > - "%s has no 'devbus,bus-width' property\n", > - node->full_name); > + "%pOF has no 'devbus,bus-width' property\n", > + node); > return err; > } > > @@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus, > &w->sync_enable); > if (err < 0) { > dev_err(devbus->dev, > - "%s has no 'devbus,sync-enable' property\n", > - node->full_name); > + "%pOF has no 'devbus,sync-enable' property\n", > + node); > return err; > } > } > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c > index a80e17de906d..f7f393541934 100644 > --- a/drivers/memory/omap-gpmc.c > +++ b/drivers/memory/omap-gpmc.c > @@ -960,7 +960,7 @@ static int gpmc_cs_remap(int cs, u32 base) > * Make sure we ignore any device offsets from the GPMC partition > * allocated for the chip select and that the new base confirms > * to the GPMC 16MB minimum granularity. > - */ > + */ > base &= ~(SZ_16M - 1); > > gpmc_cs_get_memconf(cs, &old_base, &size); > @@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, > struct omap_onenand_platform_data *gpmc_onenand_data; > > if (of_property_read_u32(child, "reg", &val) < 0) { > - dev_err(&pdev->dev, "%s has no 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", > + child); > return -ENODEV; > } > > @@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, > struct gpmc_device *gpmc = platform_get_drvdata(pdev); > > if (of_property_read_u32(child, "reg", &cs) < 0) { > - dev_err(&pdev->dev, "%s has no 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", > + child); > return -ENODEV; > } > > if (of_address_to_resource(child, 0, &res) < 0) { > - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n", > + child); > return -ENODEV; > } > > @@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, > ret = of_property_read_u32(child, "bank-width", > &gpmc_s.device_width); > if (ret < 0) { > - dev_err(&pdev->dev, "%s has no 'bank-width' property\n", > - child->full_name); > + dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n", > + child); > goto err; > } > } > -- > 2.11.0 >
On Thu, Aug 10, 2017 at 12:22 AM, Rob Herring <robh@kernel.org> wrote: > On Wed, Jul 19, 2017 at 12:47 AM, Alexandre Belloni > <alexandre.belloni@free-electrons.com> wrote: >> On 18/07/2017 at 16:43:14 -0500, Rob Herring wrote: >>> Now that we have a custom printf format specifier, convert users of >>> full_name to use %pOF instead. This is preparation to remove storing >>> of the full path string for each node. >>> >>> Signed-off-by: Rob Herring <robh@kernel.org> >>> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> >>> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> >>> Cc: Roger Quadros <rogerq@ti.com> >>> Cc: Tony Lindgren <tony@atomide.com> >>> Cc: linux-arm-kernel@lists.infradead.org >>> Cc: linux-omap@vger.kernel.org >> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > > This can go through subsystem tree. Who normally takes drivers/memory/ > changes? arm-soc? I applied it to next/drivers in arm-soc with the two acks now. For some reason the whitespace change in omap-gpmc.c did not apply though, so I ended up hand-editing the patch to take that out. Arnd
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 99e644cda4d1..597282e35c69 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -156,8 +156,8 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, out: if (ret) { dev_err(ebid->ebi->dev, - "missing or invalid timings definition in %s", - np->full_name); + "missing or invalid timings definition in %pOF", + np); return ret; } @@ -267,8 +267,8 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, return -EINVAL; if ((ret > 0 && !required) || (!ret && required)) { - dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %s", - np->full_name); + dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", + np); return -EINVAL; } @@ -311,8 +311,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, if (cs >= AT91_MATRIX_EBI_NUM_CS || !(ebi->caps->available_cs & BIT(cs))) { - dev_err(dev, "invalid reg property in %s\n", - np->full_name); + dev_err(dev, "invalid reg property in %pOF\n", np); return -EINVAL; } @@ -321,7 +320,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, } if (!numcs) { - dev_err(dev, "invalid reg property in %s\n", np->full_name); + dev_err(dev, "invalid reg property in %pOF\n", np); return -EINVAL; } @@ -569,8 +568,8 @@ static int atmel_ebi_probe(struct platform_device *pdev) ret = atmel_ebi_dev_setup(ebi, child, reg_cells); if (ret) { - dev_err(dev, "failed to configure EBI bus for %s, disabling the device", - child->full_name); + dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", + child); ret = atmel_ebi_dev_disable(ebi, child); if (ret) diff --git a/drivers/memory/jz4780-nemc.c b/drivers/memory/jz4780-nemc.c index 919d1925acb9..bcf06adefc96 100644 --- a/drivers/memory/jz4780-nemc.c +++ b/drivers/memory/jz4780-nemc.c @@ -322,8 +322,8 @@ static int jz4780_nemc_probe(struct platform_device *pdev) bank = of_read_number(prop, 1); if (bank < 1 || bank >= JZ4780_NEMC_NUM_BANKS) { dev_err(nemc->dev, - "%s requests invalid bank %u\n", - child->full_name, bank); + "%pOF requests invalid bank %u\n", + child, bank); /* Will continue the outer loop below. */ referenced = 0; @@ -334,12 +334,12 @@ static int jz4780_nemc_probe(struct platform_device *pdev) } if (!referenced) { - dev_err(nemc->dev, "%s has no addresses\n", - child->full_name); + dev_err(nemc->dev, "%pOF has no addresses\n", + child); continue; } else if (nemc->banks_present & referenced) { - dev_err(nemc->dev, "%s conflicts with another node\n", - child->full_name); + dev_err(nemc->dev, "%pOF conflicts with another node\n", + child); continue; } diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c index 24852812fd44..981860879d02 100644 --- a/drivers/memory/mvebu-devbus.c +++ b/drivers/memory/mvebu-devbus.c @@ -105,8 +105,8 @@ static int get_timing_param_ps(struct devbus *devbus, err = of_property_read_u32(node, name, &time_ps); if (err < 0) { - dev_err(devbus->dev, "%s has no '%s' property\n", - name, node->full_name); + dev_err(devbus->dev, "%pOF has no '%s' property\n", + node, name); return err; } @@ -127,8 +127,8 @@ static int devbus_get_timing_params(struct devbus *devbus, err = of_property_read_u32(node, "devbus,bus-width", &r->bus_width); if (err < 0) { dev_err(devbus->dev, - "%s has no 'devbus,bus-width' property\n", - node->full_name); + "%pOF has no 'devbus,bus-width' property\n", + node); return err; } @@ -180,8 +180,8 @@ static int devbus_get_timing_params(struct devbus *devbus, &w->sync_enable); if (err < 0) { dev_err(devbus->dev, - "%s has no 'devbus,sync-enable' property\n", - node->full_name); + "%pOF has no 'devbus,sync-enable' property\n", + node); return err; } } diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index a80e17de906d..f7f393541934 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -960,7 +960,7 @@ static int gpmc_cs_remap(int cs, u32 base) * Make sure we ignore any device offsets from the GPMC partition * allocated for the chip select and that the new base confirms * to the GPMC 16MB minimum granularity. - */ + */ base &= ~(SZ_16M - 1); gpmc_cs_get_memconf(cs, &old_base, &size); @@ -1930,8 +1930,8 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, struct omap_onenand_platform_data *gpmc_onenand_data; if (of_property_read_u32(child, "reg", &val) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", + child); return -ENODEV; } @@ -1979,14 +1979,14 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, struct gpmc_device *gpmc = platform_get_drvdata(pdev); if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); + dev_err(&pdev->dev, "%pOF has no 'reg' property\n", + child); return -ENODEV; } if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); + dev_err(&pdev->dev, "%pOF has malformed 'reg' property\n", + child); return -ENODEV; } @@ -2084,8 +2084,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); if (ret < 0) { - dev_err(&pdev->dev, "%s has no 'bank-width' property\n", - child->full_name); + dev_err(&pdev->dev, "%pOF has no 'bank-width' property\n", + child); goto err; } }
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org --- drivers/memory/atmel-ebi.c | 17 ++++++++--------- drivers/memory/jz4780-nemc.c | 12 ++++++------ drivers/memory/mvebu-devbus.c | 12 ++++++------ drivers/memory/omap-gpmc.c | 18 +++++++++--------- 4 files changed, 29 insertions(+), 30 deletions(-) -- 2.11.0