@@ -12,6 +12,7 @@
#include <string.h>
#include <unistd.h>
#include <errno.h>
+#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/utsname.h>
@@ -31,6 +32,7 @@
*/
struct cpupower_cpu_info cpupower_cpu_info;
int run_as_root;
+int base_cpu;
/* Affected cpus chosen by -c/--cpu param */
struct bitmask *cpus_chosen;
@@ -174,6 +176,7 @@ int main(int argc, const char *argv[])
unsigned int i, ret;
struct stat statbuf;
struct utsname uts;
+ char pathname[32];
cpus_chosen = bitmask_alloc(sysconf(_SC_NPROCESSORS_CONF));
@@ -198,17 +201,23 @@ int main(int argc, const char *argv[])
argv[0] = cmd = "help";
}
- get_cpu_info(0, &cpupower_cpu_info);
+ base_cpu = sched_getcpu();
+ if (base_cpu < 0) {
+ fprintf(stderr, _("No valid cpus found.\n"));
+ return EXIT_FAILURE;
+ }
+
+ get_cpu_info(&cpupower_cpu_info);
run_as_root = !geteuid();
if (run_as_root) {
ret = uname(&uts);
+ sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
if (!ret && !strcmp(uts.machine, "x86_64") &&
- stat("/dev/cpu/0/msr", &statbuf) != 0) {
+ stat(pathname, &statbuf) != 0) {
if (system("modprobe msr") == -1)
fprintf(stderr, _("MSR access not available.\n"));
}
}
-
for (i = 0; i < ARRAY_SIZE(commands); i++) {
struct cmd_struct *p = commands + i;
@@ -42,7 +42,7 @@
*
* TBD: Should there be a cpuid alternative for this if /proc is not mounted?
*/
-int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info)
+int get_cpu_info(struct cpupower_cpu_info *cpu_info)
{
FILE *fp;
char value[64];
@@ -70,7 +70,7 @@ int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info)
if (!strncmp(value, "processor\t: ", 12))
sscanf(value, "processor\t: %u", &proc);
- if (proc != cpu)
+ if (proc != (unsigned int)base_cpu)
continue;
/* Get CPU vendor */
@@ -34,6 +34,7 @@
/* Internationalization ****************************/
extern int run_as_root;
+extern int base_cpu;
extern struct bitmask *cpus_chosen;
/* Global verbose (-d) stuff *********************************/
@@ -87,11 +88,11 @@ struct cpupower_cpu_info {
*
* Extract CPU vendor, family, model, stepping info from /proc/cpuinfo
*
- * Returns 0 on success or a negativ error code
+ * Returns 0 on success or a negative error code
* Only used on x86, below global's struct values are zero/unknown on
* other archs
*/
-extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info);
+extern int get_cpu_info(struct cpupower_cpu_info *cpu_info);
extern struct cpupower_cpu_info cpupower_cpu_info;
/* cpuid and cpuinfo helpers **************************/
@@ -13,7 +13,7 @@ int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active,
*support = *active = *states = 0;
- ret = get_cpu_info(0, &cpu_info);
+ ret = get_cpu_info(&cpu_info);
if (ret)
return ret;
@@ -123,7 +123,7 @@ static int hsw_ext_start(void)
previous_count[num][cpu] = val;
}
}
- hsw_ext_get_count(TSC, &tsc_at_measure_start, 0);
+ hsw_ext_get_count(TSC, &tsc_at_measure_start, base_cpu);
return 0;
}
@@ -132,7 +132,7 @@ static int hsw_ext_stop(void)
unsigned long long val;
int num, cpu;
- hsw_ext_get_count(TSC, &tsc_at_measure_end, 0);
+ hsw_ext_get_count(TSC, &tsc_at_measure_end, base_cpu);
for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) {
for (cpu = 0; cpu < cpu_count; cpu++) {
@@ -80,7 +80,8 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
static int mperf_get_tsc(unsigned long long *tsc)
{
int ret;
- ret = read_msr(0, MSR_TSC, tsc);
+
+ ret = read_msr(base_cpu, MSR_TSC, tsc);
if (ret)
dprint("Reading TSC MSR failed, returning %llu\n", *tsc);
return ret;
@@ -129,7 +129,7 @@ static int nhm_start(void)
int num, cpu;
unsigned long long dbg, val;
- nhm_get_count(TSC, &tsc_at_measure_start, 0);
+ nhm_get_count(TSC, &tsc_at_measure_start, base_cpu);
for (num = 0; num < NHM_CSTATE_COUNT; num++) {
for (cpu = 0; cpu < cpu_count; cpu++) {
@@ -137,7 +137,7 @@ static int nhm_start(void)
previous_count[num][cpu] = val;
}
}
- nhm_get_count(TSC, &dbg, 0);
+ nhm_get_count(TSC, &dbg, base_cpu);
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
return 0;
}
@@ -148,7 +148,7 @@ static int nhm_stop(void)
unsigned long long dbg;
int num, cpu;
- nhm_get_count(TSC, &tsc_at_measure_end, 0);
+ nhm_get_count(TSC, &tsc_at_measure_end, base_cpu);
for (num = 0; num < NHM_CSTATE_COUNT; num++) {
for (cpu = 0; cpu < cpu_count; cpu++) {
@@ -156,7 +156,7 @@ static int nhm_stop(void)
current_count[num][cpu] = val;
}
}
- nhm_get_count(TSC, &dbg, 0);
+ nhm_get_count(TSC, &dbg, base_cpu);
dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
return 0;
@@ -120,7 +120,7 @@ static int snb_start(void)
previous_count[num][cpu] = val;
}
}
- snb_get_count(TSC, &tsc_at_measure_start, 0);
+ snb_get_count(TSC, &tsc_at_measure_start, base_cpu);
return 0;
}
@@ -129,7 +129,7 @@ static int snb_stop(void)
unsigned long long val;
int num, cpu;
- snb_get_count(TSC, &tsc_at_measure_end, 0);
+ snb_get_count(TSC, &tsc_at_measure_end, base_cpu);
for (num = 0; num < SNB_CSTATE_COUNT; num++) {
for (cpu = 0; cpu < cpu_count; cpu++) {
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0, allowing systems to offline cpu0. But when cpu0 is offline, cpupower monitor will not display all processor and Mperf information: [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Idle_Stats CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13 1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26 5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50 2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84 6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00 3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99 7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70 This patch replaces the hard-coded use of cpu0 in cpupower with the current cpu, allowing it to run without a cpu0. After the patch is applied, [root@intel-skylake-dh-03 cpupower]# ./cpupower monitor WARNING: at least one cpu is offline |Nehalem || Mperf || Idle_Stats CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S 4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52 1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88 5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50 2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00 6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99 3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13 7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57 There are some minor cleanups included in this patch. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Renninger <trenn@suse.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: ego.lkml@gmail.com Cc: s1seetee@linux.vnet.ibm.com --- tools/power/cpupower/utils/cpupower.c | 15 ++++++++++++--- tools/power/cpupower/utils/helpers/cpuid.c | 4 ++-- tools/power/cpupower/utils/helpers/helpers.h | 5 +++-- tools/power/cpupower/utils/helpers/misc.c | 2 +- tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c | 4 ++-- tools/power/cpupower/utils/idle_monitor/mperf_monitor.c | 3 ++- tools/power/cpupower/utils/idle_monitor/nhm_idle.c | 8 ++++---- tools/power/cpupower/utils/idle_monitor/snb_idle.c | 4 ++-- 8 files changed, 28 insertions(+), 17 deletions(-)