| Message ID | 1502196418-31341-1-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Aug 08, 2017 at 01:46:58PM +0100, Biju Das wrote: > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > --- > This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. > This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html Process comments as per those for "[PATCH 2/2] ARM: dts: r8a7743: Add I2C DT support". Patch itself looks good to me. > > arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi > index 14222c72..5c2b140 100644 > --- a/arch/arm/boot/dts/r8a7743.dtsi > +++ b/arch/arm/boot/dts/r8a7743.dtsi > @@ -25,6 +25,9 @@ > i2c3 = &i2c3; > i2c4 = &i2c4; > i2c5 = &i2c5; > + i2c6 = &i2c6; > + i2c7 = &i2c7; > + i2c8 = &i2c8; > }; > > cpus { > @@ -436,6 +439,58 @@ > status = "disabled"; > }; > > + i2c6: i2c@e60b0000 { > + /* doesn't need pinmux */ > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "renesas,iic-r8a7743", > + "renesas,rcar-gen2-iic", > + "renesas,rmobile-iic"; > + reg = <0 0xe60b0000 0 0x425>; > + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 926>; > + dmas = <&dmac0 0x77>, <&dmac0 0x78>, > + <&dmac1 0x77>, <&dmac1 0x78>; > + dma-names = "tx", "rx", "tx", "rx"; > + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > + resets = <&cpg CPG_MOD 926>; > + status = "disabled"; > + }; > + > + i2c7: i2c@e6500000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "renesas,iic-r8a7743", > + "renesas,rcar-gen2-iic", > + "renesas,rmobile-iic"; > + reg = <0 0xe6500000 0 0x425>; > + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 318>; > + dmas = <&dmac0 0x61>, <&dmac0 0x62>, > + <&dmac1 0x61>, <&dmac1 0x62>; > + dma-names = "tx", "rx", "tx", "rx"; > + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > + resets = <&cpg 318>; > + status = "disabled"; > + }; > + > + i2c8: i2c@e6510000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "renesas,iic-r8a7743", > + "renesas,rcar-gen2-iic", > + "renesas,rmobile-iic"; > + reg = <0 0xe6510000 0 0x425>; > + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 323>; > + dmas = <&dmac0 0x65>, <&dmac0 0x66>, > + <&dmac1 0x65>, <&dmac1 0x66>; > + dma-names = "tx", "rx", "tx", "rx"; > + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > + resets = <&cpg 323>; > + status = "disabled"; > + }; > + > scifa0: serial@e6c40000 { > compatible = "renesas,scifa-r8a7743", > "renesas,rcar-gen2-scifa", "renesas,scifa"; > -- > 1.9.1 >
On 8/8/2017 3:46 PM, Biju Das wrote: > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > --- > This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. > This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html > > arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi > index 14222c72..5c2b140 100644 > --- a/arch/arm/boot/dts/r8a7743.dtsi > +++ b/arch/arm/boot/dts/r8a7743.dtsi [...] > @@ -436,6 +439,58 @@ > status = "disabled"; > }; > > + i2c6: i2c@e60b0000 { I'd use iic0 as the label. > + /* doesn't need pinmux */ > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "renesas,iic-r8a7743", > + "renesas,rcar-gen2-iic", > + "renesas,rmobile-iic"; > + reg = <0 0xe60b0000 0 0x425>; > + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 926>; > + dmas = <&dmac0 0x77>, <&dmac0 0x78>, > + <&dmac1 0x77>, <&dmac1 0x78>; > + dma-names = "tx", "rx", "tx", "rx"; > + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > + resets = <&cpg CPG_MOD 926>; CPG_MOD not needed here, it's not a "clocks" prop. [...] MBR, Sergei
> -----Original Message----- > From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com] > Sent: 09 August 2017 10:17 > To: Biju Das <biju.das@bp.renesas.com>; Rob Herring <robh+dt@kernel.org>; > Mark Rutland <mark.rutland@arm.com> > Cc: Simon Horman <horms@verge.net.au>; Wolfram Sang <wsa@the- > dreams.de>; Magnus Damm <magnus.damm@gmail.com>; Russell King > <linux@armlinux.org.uk>; Chris Paterson <Chris.Paterson2@renesas.com>; > devicetree@vger.kernel.org; linux-renesas-soc@vger.kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH 2/2] ARM: dts: r8a7743: Add IIC cores to dtsi > > On 8/8/2017 3:46 PM, Biju Das wrote: > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > --- > > This patch has been tested against Linux-next tag 20170727 and renesas-dev > branch. > > This patch depends on > > https://www.spinics.net/lists/arm-kernel/msg599220.html > > > > arch/arm/boot/dts/r8a7743.dtsi | 55 > ++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 55 insertions(+) > > > > diff --git a/arch/arm/boot/dts/r8a7743.dtsi > > b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72..5c2b140 100644 > > --- a/arch/arm/boot/dts/r8a7743.dtsi > > +++ b/arch/arm/boot/dts/r8a7743.dtsi > [...] > > @@ -436,6 +439,58 @@ > > status = "disabled"; > > }; > > > > +i2c6: i2c@e60b0000 { > > I'd use iic0 as the label. > > > +/* doesn't need pinmux */ > > +#address-cells = <1>; > > +#size-cells = <0>; > > +compatible = "renesas,iic-r8a7743", > > + "renesas,rcar-gen2-iic", > > + "renesas,rmobile-iic"; > > +reg = <0 0xe60b0000 0 0x425>; > > +interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > > +clocks = <&cpg CPG_MOD 926>; > > +dmas = <&dmac0 0x77>, <&dmac0 0x78>, > > + <&dmac1 0x77>, <&dmac1 0x78>; > > +dma-names = "tx", "rx", "tx", "rx"; > > +power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > > +resets = <&cpg CPG_MOD 926>; > > CPG_MOD not needed here, it's not a "clocks" prop. Thanks Sergie, I will correct this. [>] > [...] > > MBR, Sergei Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
On Wed, Aug 09, 2017 at 12:17:06PM +0300, Sergei Shtylyov wrote: > On 8/8/2017 3:46 PM, Biju Das wrote: > > >Signed-off-by: Biju Das <biju.das@bp.renesas.com> > >--- > >This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. > >This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html > > > > arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 55 insertions(+) > > > >diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi > >index 14222c72..5c2b140 100644 > >--- a/arch/arm/boot/dts/r8a7743.dtsi > >+++ b/arch/arm/boot/dts/r8a7743.dtsi > [...] > >@@ -436,6 +439,58 @@ > > status = "disabled"; > > }; > >+ i2c6: i2c@e60b0000 { > > I'd use iic0 as the label. I have no preference here other than that we try to be consistent in DT for different R-Car SoCs. Wolfram, do you have an opinion on this? > > >+ /* doesn't need pinmux */ > >+ #address-cells = <1>; > >+ #size-cells = <0>; > >+ compatible = "renesas,iic-r8a7743", > >+ "renesas,rcar-gen2-iic", > >+ "renesas,rmobile-iic"; > >+ reg = <0 0xe60b0000 0 0x425>; > >+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; > >+ clocks = <&cpg CPG_MOD 926>; > >+ dmas = <&dmac0 0x77>, <&dmac0 0x78>, > >+ <&dmac1 0x77>, <&dmac1 0x78>; > >+ dma-names = "tx", "rx", "tx", "rx"; > >+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; > >+ resets = <&cpg CPG_MOD 926>; > > CPG_MOD not needed here, it's not a "clocks" prop. > > [...] > > MBR, Sergei >
> > >+ i2c6: i2c@e60b0000 { > > > > I'd use iic0 as the label. > > I have no preference here other than that we try to be consistent > in DT for different R-Car SoCs. Wolfram, do you have an opinion on this? Back then, for M2-W, I decided to go with the schematics/datasheets. And those mentioned i2c6 rather than iic0. For that reason, the comment "/* The memory map in the User's Manual maps the cores to bus numbers */" exists in r8a7791.dtsi. Dunno the manual of this SoC here.
Hello, > From: Wolfram Sang [mailto:wsa@the-dreams.de] > Sent: 10 August 2017 12:24 > > > > > >+ i2c6: i2c@e60b0000 { > > > > > > I'd use iic0 as the label. > > > > I have no preference here other than that we try to be consistent in > > DT for different R-Car SoCs. Wolfram, do you have an opinion on this? > > Back then, for M2-W, I decided to go with the schematics/datasheets. > And those mentioned i2c6 rather than iic0. For that reason, the comment The M2 schematics still use i2c6, and for consistency I'd vote to use the same with RZ/G1M. > > "/* The memory map in the User's Manual maps the cores to bus numbers */" > > exists in r8a7791.dtsi. Dunno the manual of this SoC here. The manual for r8a7743 uses the same terminology as the r8a7791 manuals. Kind regards, Chris
On Thu, Aug 10, 2017 at 01:49:05PM +0000, Chris Paterson wrote: > Hello, > > > From: Wolfram Sang [mailto:wsa@the-dreams.de] > > Sent: 10 August 2017 12:24 > > > > > > > > >+ i2c6: i2c@e60b0000 { > > > > > > > > I'd use iic0 as the label. > > > > > > I have no preference here other than that we try to be consistent in > > > DT for different R-Car SoCs. Wolfram, do you have an opinion on this? > > > > Back then, for M2-W, I decided to go with the schematics/datasheets. > > And those mentioned i2c6 rather than iic0. For that reason, the comment > > The M2 schematics still use i2c6, and for consistency I'd vote to use the same with RZ/G1M. +1 > > "/* The memory map in the User's Manual maps the cores to bus numbers */" > > > > exists in r8a7791.dtsi. Dunno the manual of this SoC here. > > The manual for r8a7743 uses the same terminology as the r8a7791 manuals.
On Thu, Aug 10, 2017 at 3:49 PM, Chris Paterson <Chris.Paterson2@renesas.com> wrote: >> From: Wolfram Sang [mailto:wsa@the-dreams.de] >> Sent: 10 August 2017 12:24 >> >> >> > > >+ i2c6: i2c@e60b0000 { >> > > >> > > I'd use iic0 as the label. Sergei: I assume you meant "iic3"? ;-) >> > >> > I have no preference here other than that we try to be consistent in >> > DT for different R-Car SoCs. Wolfram, do you have an opinion on this? >> >> Back then, for M2-W, I decided to go with the schematics/datasheets. >> And those mentioned i2c6 rather than iic0. For that reason, the comment > > The M2 schematics still use i2c6, and for consistency I'd vote to use the same with RZ/G1M. > >> >> "/* The memory map in the User's Manual maps the cores to bus numbers */" >> >> exists in r8a7791.dtsi. Dunno the manual of this SoC here. > > The manual for r8a7743 uses the same terminology as the r8a7791 manuals. The pinctrl section does, indeed. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hello! On 08/14/2017 05:15 PM, Geert Uytterhoeven wrote: >>> From: Wolfram Sang [mailto:wsa@the-dreams.de] >>> Sent: 10 August 2017 12:24 >>> >>> >>>>>> + i2c6: i2c@e60b0000 { >>>>> >>>>> I'd use iic0 as the label. > > Sergei: I assume you meant "iic3"? ;-) After having a look at the manual, yes. :-) [...] > Gr{oetje,eeting}s, > > Geert MBR, Sergei
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 14222c72..5c2b140 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -25,6 +25,9 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; }; cpus { @@ -436,6 +439,58 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg CPG_MOD 926>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7743", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa";
Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- This patch has been tested against Linux-next tag 20170727 and renesas-dev branch. This patch depends on https://www.spinics.net/lists/arm-kernel/msg599220.html arch/arm/boot/dts/r8a7743.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)