diff mbox

ARM i.MX dma: Fix burstsize settings

Message ID 20110706091833.GT6069@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Sascha Hauer July 6, 2011, 9:18 a.m. UTC
dmaengine expects the maxburst parameter in words, not bytes.
The imxdma driver and its users do this wrong. Fix this.

As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
with imx-dma. This broke the driver with imx-sdma support which
correctly takes the maxburst parameter in words. This patch
puts the sdma based sound back to work.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

I made this as a cross subsystem patch to maintain bisectability. I
suggest to push it either via my tree or the dmaengine tree.

 drivers/dma/imx-dma.c           |    3 ++-
 drivers/mmc/host/mxcmmc.c       |    8 ++++----
 sound/soc/imx/imx-pcm-dma-mx2.c |    4 ++--
 3 files changed, 8 insertions(+), 7 deletions(-)

Comments

Mark Brown July 6, 2011, 3:03 p.m. UTC | #1
On Wed, Jul 06, 2011 at 11:18:33AM +0200, Sascha Hauer wrote:
> dmaengine expects the maxburst parameter in words, not bytes.
> The imxdma driver and its users do this wrong. Fix this.
> 
> As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
> with imx-dma. This broke the driver with imx-sdma support which
> correctly takes the maxburst parameter in words. This patch
> puts the sdma based sound back to work.

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Probably makes sense to send via the ARM tree unless there's merge
issues?
Vinod Koul July 7, 2011, 1:35 a.m. UTC | #2
On Wed, 2011-07-06 at 08:03 -0700, Mark Brown wrote:
> On Wed, Jul 06, 2011 at 11:18:33AM +0200, Sascha Hauer wrote:
> > dmaengine expects the maxburst parameter in words, not bytes.
> > The imxdma driver and its users do this wrong. Fix this.
> > 
> > As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
> > with imx-dma. This broke the driver with imx-sdma support which
> > correctly takes the maxburst parameter in words. This patch
> > puts the sdma based sound back to work.
> 
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>

> 
> Probably makes sense to send via the ARM tree unless there's merge
> issues?
Sure, I dont have naything on this driver in my next and previous
updates for Sascha went thru imx tree, so would make sense for these to
go that way as well

~Vinod Koul
Intel Corp.
diff mbox

Patch

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index e18eaab..d99f71c 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -135,7 +135,8 @@  static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		if (ret)
 			return ret;
 
-		imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+		imx_dma_config_burstlen(imxdmac->imxdma_channel,
+				imxdmac->watermark_level * imxdmac->word_size);
 
 		return 0;
 	default:
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index cc20e02..14aa213 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -715,13 +715,13 @@  static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	int burstlen, ret;
 
 	/*
-	 * use burstlen of 64 in 4 bit mode (--> reg value  0)
-	 * use burstlen of 16 in 1 bit mode (--> reg value 16)
+	 * use burstlen of 64 (16 words) in 4 bit mode (--> reg value  0)
+	 * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
 	 */
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		burstlen = 64;
-	else
 		burstlen = 16;
+	else
+		burstlen = 4;
 
 	if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
 		host->burstlen = burstlen;
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 4173b3d..43fdc24f 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@  static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
 		slave_config.direction = DMA_TO_DEVICE;
 		slave_config.dst_addr = dma_params->dma_addr;
 		slave_config.dst_addr_width = buswidth;
-		slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
 	} else {
 		slave_config.direction = DMA_FROM_DEVICE;
 		slave_config.src_addr = dma_params->dma_addr;
 		slave_config.src_addr_width = buswidth;
-		slave_config.src_maxburst = dma_params->burstsize * buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
 	}
 
 	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);