Message ID | 20170809114857.4945-5-tjakobi@math.uni-bielefeld.de (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
2017년 08월 09일 20:48에 Tobias Jakobi 이(가) 쓴 글: > We always translate the dma address such that the offsets of > the source image are zero. Hence we can remove manipulation of > the MXR_GRAPHIC_SXY(win) register. > > We leave the register defines (in regs_mixer.h) in place, since > they document the hardware. > > Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> > --- > drivers/gpu/drm/exynos/exynos_mixer.c | 11 ++--------- > 1 file changed, 2 insertions(+), 9 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c > index 8d68de85bada..28fbe79befff 100644 > --- a/drivers/gpu/drm/exynos/exynos_mixer.c > +++ b/drivers/gpu/drm/exynos/exynos_mixer.c > @@ -584,7 +584,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx, > unsigned long flags; > unsigned int win = plane->index; > unsigned int x_ratio = 0, y_ratio = 0; > - unsigned int src_x_offset, src_y_offset, dst_x_offset, dst_y_offset; > + unsigned int dst_x_offset, dst_y_offset; > dma_addr_t dma_addr; > unsigned int fmt; > u32 val; > @@ -618,12 +618,10 @@ static void mixer_graph_buffer(struct mixer_context *ctx, > dst_x_offset = state->crtc.x; > dst_y_offset = state->crtc.y; > > - /* converting dma address base and source offset */ > + /* translate dma address base s.t. the source image offset is zero */ > dma_addr = exynos_drm_fb_dma_addr(fb, 0) > + (state->src.x * fb->format->cpp[0]) > + (state->src.y * fb->pitches[0]); > - src_x_offset = 0; > - src_y_offset = 0; > > if (mode->flags & DRM_MODE_FLAG_INTERLACE) > __set_bit(MXR_BIT_INTERLACE, &ctx->flags); > @@ -654,11 +652,6 @@ static void mixer_graph_buffer(struct mixer_context *ctx, > val |= MXR_GRP_WH_V_SCALE(y_ratio); > mixer_reg_write(res, MXR_GRAPHIC_WH(win), val); > > - /* setup offsets in source image */ > - val = MXR_GRP_SXY_SX(src_x_offset); > - val |= MXR_GRP_SXY_SY(src_y_offset); > - mixer_reg_write(res, MXR_GRAPHIC_SXY(win), val); The offset of source buffer can be set at bootloader so previous value can be keeped. I think MXR_GRAPHIC_SXY register should be cleared at mixer_win_reset function if you want to remove above lines. > - > /* setup offsets in display image */ > val = MXR_GRP_DXY_DX(dst_x_offset); > val |= MXR_GRP_DXY_DY(dst_y_offset); > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Inki Dae wrote: > > > 2017년 08월 09일 20:48에 Tobias Jakobi 이(가) 쓴 글: >> We always translate the dma address such that the offsets of >> the source image are zero. Hence we can remove manipulation of >> the MXR_GRAPHIC_SXY(win) register. >> >> We leave the register defines (in regs_mixer.h) in place, since >> they document the hardware. >> >> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> >> --- >> drivers/gpu/drm/exynos/exynos_mixer.c | 11 ++--------- >> 1 file changed, 2 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c >> index 8d68de85bada..28fbe79befff 100644 >> --- a/drivers/gpu/drm/exynos/exynos_mixer.c >> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c >> @@ -584,7 +584,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx, >> unsigned long flags; >> unsigned int win =lane->index; >> unsigned int x_ratio =, y_ratio = 0; >> - unsigned int src_x_offset, src_y_offset, dst_x_offset, dst_y_offset; >> + unsigned int dst_x_offset, dst_y_offset; >> dma_addr_t dma_addr; >> unsigned int fmt; >> u32 val; >> @@ -618,12 +618,10 @@ static void mixer_graph_buffer(struct mixer_context *ctx, >> dst_x_offset =tate->crtc.x; >> dst_y_offset =tate->crtc.y; >> >> - /* converting dma address base and source offset */ >> + /* translate dma address base s.t. the source image offset is zero */ >> dma_addr =xynos_drm_fb_dma_addr(fb, 0) >> + (state->src.x * fb->format->cpp[0]) >> + (state->src.y * fb->pitches[0]); >> - src_x_offset =; >> - src_y_offset =; >> >> if (mode->flags & DRM_MODE_FLAG_INTERLACE) >> __set_bit(MXR_BIT_INTERLACE, &ctx->flags); >> @@ -654,11 +652,6 @@ static void mixer_graph_buffer(struct mixer_context *ctx, >> val |=XR_GRP_WH_V_SCALE(y_ratio); >> mixer_reg_write(res, MXR_GRAPHIC_WH(win), val); >> >> - /* setup offsets in source image */ >> - val =XR_GRP_SXY_SX(src_x_offset); >> - val |=XR_GRP_SXY_SY(src_y_offset); >> - mixer_reg_write(res, MXR_GRAPHIC_SXY(win), val); > > The offset of source buffer can be set at bootloader so previous value can be keeped. I think MXR_GRAPHIC_SXY register should be cleared at mixer_win_reset function if you want to remove above lines. > Good idea, will do so. - Tobias >> - >> /* setup offsets in display image */ >> val =XR_GRP_DXY_DX(dst_x_offset); >> val |=XR_GRP_DXY_DY(dst_y_offset); >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 8d68de85bada..28fbe79befff 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -584,7 +584,7 @@ static void mixer_graph_buffer(struct mixer_context *ctx, unsigned long flags; unsigned int win = plane->index; unsigned int x_ratio = 0, y_ratio = 0; - unsigned int src_x_offset, src_y_offset, dst_x_offset, dst_y_offset; + unsigned int dst_x_offset, dst_y_offset; dma_addr_t dma_addr; unsigned int fmt; u32 val; @@ -618,12 +618,10 @@ static void mixer_graph_buffer(struct mixer_context *ctx, dst_x_offset = state->crtc.x; dst_y_offset = state->crtc.y; - /* converting dma address base and source offset */ + /* translate dma address base s.t. the source image offset is zero */ dma_addr = exynos_drm_fb_dma_addr(fb, 0) + (state->src.x * fb->format->cpp[0]) + (state->src.y * fb->pitches[0]); - src_x_offset = 0; - src_y_offset = 0; if (mode->flags & DRM_MODE_FLAG_INTERLACE) __set_bit(MXR_BIT_INTERLACE, &ctx->flags); @@ -654,11 +652,6 @@ static void mixer_graph_buffer(struct mixer_context *ctx, val |= MXR_GRP_WH_V_SCALE(y_ratio); mixer_reg_write(res, MXR_GRAPHIC_WH(win), val); - /* setup offsets in source image */ - val = MXR_GRP_SXY_SX(src_x_offset); - val |= MXR_GRP_SXY_SY(src_y_offset); - mixer_reg_write(res, MXR_GRAPHIC_SXY(win), val); - /* setup offsets in display image */ val = MXR_GRP_DXY_DX(dst_x_offset); val |= MXR_GRP_DXY_DY(dst_y_offset);
We always translate the dma address such that the offsets of the source image are zero. Hence we can remove manipulation of the MXR_GRAPHIC_SXY(win) register. We leave the register defines (in regs_mixer.h) in place, since they document the hardware. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> --- drivers/gpu/drm/exynos/exynos_mixer.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)