Message ID | 1502402270-15328-3-git-send-email-eajames@linux.vnet.ibm.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On Thu, Aug 10, 2017 at 04:57:48PM -0500, eajames@linux.vnet.ibm.com wrote: > From: "Edward A. James" <eajames@us.ibm.com> > > Pmbus always reads byte data from the status register, even if > configured to use STATUS_WORD. Use a function pointer to read the > correct amount of data from the registers. > Also switch to try STATUS_WORD first before STATUS_BYTE on init. > > Signed-off-by: Edward A. James <eajames@us.ibm.com> Applied to hwmon-next. Thanks, Guenter > --- > drivers/hwmon/pmbus/pmbus_core.c | 54 +++++++++++++++++++++++++++++----------- > 1 file changed, 40 insertions(+), 14 deletions(-) > > diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c > index 4ec7586..277d170 100644 > --- a/drivers/hwmon/pmbus/pmbus_core.c > +++ b/drivers/hwmon/pmbus/pmbus_core.c > @@ -113,7 +113,8 @@ struct pmbus_data { > * so we keep them all together. > */ > u16 status[PB_NUM_STATUS_REG]; > - u8 status_register; > + > + int (*read_status)(struct i2c_client *client, int page); > > u8 currpage; > }; > @@ -324,7 +325,7 @@ static int pmbus_check_status_cml(struct i2c_client *client) > struct pmbus_data *data = i2c_get_clientdata(client); > int status, status2; > > - status = _pmbus_read_byte_data(client, -1, data->status_register); > + status = data->read_status(client, -1); > if (status < 0 || (status & PB_STATUS_CML)) { > status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); > if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) > @@ -348,6 +349,23 @@ static bool pmbus_check_register(struct i2c_client *client, > return rv >= 0; > } > > +static bool pmbus_check_status_register(struct i2c_client *client, int page) > +{ > + int status; > + struct pmbus_data *data = i2c_get_clientdata(client); > + > + status = data->read_status(client, page); > + if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) && > + (status & PB_STATUS_CML)) { > + status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); > + if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND)) > + status = -EIO; > + } > + > + pmbus_clear_fault_page(client, -1); > + return status >= 0; > +} > + > bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) > { > return pmbus_check_register(client, _pmbus_read_byte_data, page, reg); > @@ -394,8 +412,7 @@ static struct pmbus_data *pmbus_update_device(struct device *dev) > > for (i = 0; i < info->pages; i++) { > data->status[PB_STATUS_BASE + i] > - = _pmbus_read_byte_data(client, i, > - data->status_register); > + = data->read_status(client, i); > for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) { > struct _pmbus_status *s = &pmbus_status[j]; > > @@ -1051,8 +1068,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client, > * the generic status register for this page is accessible. > */ > if (!ret && attr->gbit && > - pmbus_check_byte_register(client, page, > - data->status_register)) { > + pmbus_check_status_register(client, page)) { > ret = pmbus_add_boolean(data, name, "alarm", index, > NULL, NULL, > PB_STATUS_BASE + page, > @@ -1729,6 +1745,16 @@ static int pmbus_identify_common(struct i2c_client *client, > return 0; > } > > +static int pmbus_read_status_byte(struct i2c_client *client, int page) > +{ > + return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE); > +} > + > +static int pmbus_read_status_word(struct i2c_client *client, int page) > +{ > + return _pmbus_read_word_data(client, page, PMBUS_STATUS_WORD); > +} > + > static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, > struct pmbus_driver_info *info) > { > @@ -1736,16 +1762,16 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, > int page, ret; > > /* > - * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try > - * to use PMBUS_STATUS_WORD instead if that is the case. > + * Some PMBus chips don't support PMBUS_STATUS_WORD, so try > + * to use PMBUS_STATUS_BYTE instead if that is the case. > * Bail out if both registers are not supported. > */ > - data->status_register = PMBUS_STATUS_BYTE; > - ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); > - if (ret < 0 || ret == 0xff) { > - data->status_register = PMBUS_STATUS_WORD; > - ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); > - if (ret < 0 || ret == 0xffff) { > + data->read_status = pmbus_read_status_word; > + ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); > + if (ret < 0 || ret == 0xffff) { > + data->read_status = pmbus_read_status_byte; > + ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); > + if (ret < 0 || ret == 0xff) { > dev_err(dev, "PMBus status register not found\n"); > return -ENODEV; > } -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 4ec7586..277d170 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -113,7 +113,8 @@ struct pmbus_data { * so we keep them all together. */ u16 status[PB_NUM_STATUS_REG]; - u8 status_register; + + int (*read_status)(struct i2c_client *client, int page); u8 currpage; }; @@ -324,7 +325,7 @@ static int pmbus_check_status_cml(struct i2c_client *client) struct pmbus_data *data = i2c_get_clientdata(client); int status, status2; - status = _pmbus_read_byte_data(client, -1, data->status_register); + status = data->read_status(client, -1); if (status < 0 || (status & PB_STATUS_CML)) { status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) @@ -348,6 +349,23 @@ static bool pmbus_check_register(struct i2c_client *client, return rv >= 0; } +static bool pmbus_check_status_register(struct i2c_client *client, int page) +{ + int status; + struct pmbus_data *data = i2c_get_clientdata(client); + + status = data->read_status(client, page); + if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) && + (status & PB_STATUS_CML)) { + status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); + if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND)) + status = -EIO; + } + + pmbus_clear_fault_page(client, -1); + return status >= 0; +} + bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) { return pmbus_check_register(client, _pmbus_read_byte_data, page, reg); @@ -394,8 +412,7 @@ static struct pmbus_data *pmbus_update_device(struct device *dev) for (i = 0; i < info->pages; i++) { data->status[PB_STATUS_BASE + i] - = _pmbus_read_byte_data(client, i, - data->status_register); + = data->read_status(client, i); for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) { struct _pmbus_status *s = &pmbus_status[j]; @@ -1051,8 +1068,7 @@ static int pmbus_add_sensor_attrs_one(struct i2c_client *client, * the generic status register for this page is accessible. */ if (!ret && attr->gbit && - pmbus_check_byte_register(client, page, - data->status_register)) { + pmbus_check_status_register(client, page)) { ret = pmbus_add_boolean(data, name, "alarm", index, NULL, NULL, PB_STATUS_BASE + page, @@ -1729,6 +1745,16 @@ static int pmbus_identify_common(struct i2c_client *client, return 0; } +static int pmbus_read_status_byte(struct i2c_client *client, int page) +{ + return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE); +} + +static int pmbus_read_status_word(struct i2c_client *client, int page) +{ + return _pmbus_read_word_data(client, page, PMBUS_STATUS_WORD); +} + static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, struct pmbus_driver_info *info) { @@ -1736,16 +1762,16 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, int page, ret; /* - * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try - * to use PMBUS_STATUS_WORD instead if that is the case. + * Some PMBus chips don't support PMBUS_STATUS_WORD, so try + * to use PMBUS_STATUS_BYTE instead if that is the case. * Bail out if both registers are not supported. */ - data->status_register = PMBUS_STATUS_BYTE; - ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); - if (ret < 0 || ret == 0xff) { - data->status_register = PMBUS_STATUS_WORD; - ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); - if (ret < 0 || ret == 0xffff) { + data->read_status = pmbus_read_status_word; + ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); + if (ret < 0 || ret == 0xffff) { + data->read_status = pmbus_read_status_byte; + ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); + if (ret < 0 || ret == 0xff) { dev_err(dev, "PMBus status register not found\n"); return -ENODEV; }