@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
new file mode 100644
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40020000 0x3000>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&syscfg 0x8>;
+ pins-are-numbered;
+
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+ st,bank-name = "GPIOK";
+ };
+
+ usart1_pins_a: usart1@0 {
+ pins1 {
+ pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3@0 {
+ pins1 {
+ pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+ bias-disable;
+ };
+ };
+
+ usbotg_fs_pins_a: usbotg_fs@0 {
+ pins {
+ pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+ <STM32F429_PA11_FUNC_OTG_FS_DM>,
+ <STM32F429_PA12_FUNC_OTG_FS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_fs_pins_b: usbotg_fs@1 {
+ pins {
+ pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+ <STM32F429_PB14_FUNC_OTG_HS_DM>,
+ <STM32F429_PB15_FUNC_OTG_HS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg_hs@0 {
+ pins {
+ pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+ <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+ <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+ <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+ <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+ <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+ <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+ <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+ <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+ <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+ <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+ <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ ethernet_mii: mii@0 {
+ pins {
+ pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+ <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+ <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+ <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+ <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+ <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+ <STM32F429_PA2_FUNC_ETH_MDIO>,
+ <STM32F429_PC1_FUNC_ETH_MDC>,
+ <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+ <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+ <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+ <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+ <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+ <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+ slew-rate = <2>;
+ };
+ };
+
+ adc3_in8_pin: adc@200 {
+ pins {
+ pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+ };
+ };
+
+ pwm1_pins: pwm@1 {
+ pins {
+ pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+ <STM32F429_PB13_FUNC_TIM1_CH1N>,
+ <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ };
+ };
+
+ pwm3_pins: pwm@3 {
+ pins {
+ pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+ <STM32F429_PB5_FUNC_TIM3_CH2>;
+ };
+ };
+
+ i2c1_pins: i2c1@0 {
+ pins {
+ pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+ <STM32F429_PB6_FUNC_I2C1_SCL>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <3>;
+ };
+ };
+
+ ltdc_pins: ltdc@0 {
+ pins {
+ pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+ <STM32F429_PI13_FUNC_LCD_VSYNC>,
+ <STM32F429_PI14_FUNC_LCD_CLK>,
+ <STM32F429_PI15_FUNC_LCD_R0>,
+ <STM32F429_PJ0_FUNC_LCD_R1>,
+ <STM32F429_PJ1_FUNC_LCD_R2>,
+ <STM32F429_PJ2_FUNC_LCD_R3>,
+ <STM32F429_PJ3_FUNC_LCD_R4>,
+ <STM32F429_PJ4_FUNC_LCD_R5>,
+ <STM32F429_PJ5_FUNC_LCD_R6>,
+ <STM32F429_PJ6_FUNC_LCD_R7>,
+ <STM32F429_PJ7_FUNC_LCD_G0>,
+ <STM32F429_PJ8_FUNC_LCD_G1>,
+ <STM32F429_PJ9_FUNC_LCD_G2>,
+ <STM32F429_PJ10_FUNC_LCD_G3>,
+ <STM32F429_PJ11_FUNC_LCD_G4>,
+ <STM32F429_PJ12_FUNC_LCD_B0>,
+ <STM32F429_PJ13_FUNC_LCD_B1>,
+ <STM32F429_PJ14_FUNC_LCD_B2>,
+ <STM32F429_PJ15_FUNC_LCD_B3>,
+ <STM32F429_PK0_FUNC_LCD_G5>,
+ <STM32F429_PK1_FUNC_LCD_G6>,
+ <STM32F429_PK2_FUNC_LCD_G7>,
+ <STM32F429_PK3_FUNC_LCD_B4>,
+ <STM32F429_PK4_FUNC_LCD_B5>,
+ <STM32F429_PK5_FUNC_LCD_B6>,
+ <STM32F429_PK6_FUNC_LCD_B7>,
+ <STM32F429_PK7_FUNC_LCD_DE>;
+ slew-rate = <2>;
+ };
+ };
+
+ dcmi_pins: dcmi@0 {
+ pins {
+ pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+ <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+ <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+ <STM32F429_PC6_FUNC_DCMI_D0>,
+ <STM32F429_PC7_FUNC_DCMI_D1>,
+ <STM32F429_PC8_FUNC_DCMI_D2>,
+ <STM32F429_PC9_FUNC_DCMI_D3>,
+ <STM32F429_PC11_FUNC_DCMI_D4>,
+ <STM32F429_PD3_FUNC_DCMI_D5>,
+ <STM32F429_PB8_FUNC_DCMI_D6>,
+ <STM32F429_PE6_FUNC_DCMI_D7>,
+ <STM32F429_PC10_FUNC_DCMI_D8>,
+ <STM32F429_PC12_FUNC_DCMI_D9>,
+ <STM32F429_PD6_FUNC_DCMI_D10>,
+ <STM32F429_PD2_FUNC_DCMI_D11>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+ };
+ };
+};
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
/ {
new file mode 100644
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ compatible = "st,stm32f429-pinctrl";
+
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+ };
+};
@@ -47,7 +47,6 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
@@ -566,302 +565,6 @@
status = "disabled";
};
- pinctrl: pin-controller {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32f429-pinctrl";
- ranges = <0 0x40020000 0x3000>;
- interrupt-parent = <&exti>;
- st,syscfg = <&syscfg 0x8>;
- pins-are-numbered;
-
- gpioa: gpio@40020000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
- st,bank-name = "GPIOA";
- };
-
- gpiob: gpio@40020400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
- st,bank-name = "GPIOB";
- };
-
- gpioc: gpio@40020800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
- st,bank-name = "GPIOC";
- };
-
- gpiod: gpio@40020c00 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xc00 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
- st,bank-name = "GPIOD";
- };
-
- gpioe: gpio@40021000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
- st,bank-name = "GPIOE";
- };
-
- gpiof: gpio@40021400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
- st,bank-name = "GPIOF";
- };
-
- gpiog: gpio@40021800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
- st,bank-name = "GPIOG";
- };
-
- gpioh: gpio@40021c00 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1c00 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
- st,bank-name = "GPIOH";
- };
-
- gpioi: gpio@40022000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
- st,bank-name = "GPIOI";
- };
-
- gpioj: gpio@40022400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
- st,bank-name = "GPIOJ";
- };
-
- gpiok: gpio@40022800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
- st,bank-name = "GPIOK";
- };
-
- usart1_pins_a: usart1@0 {
- pins1 {
- pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
- bias-disable;
- };
- };
-
- usart3_pins_a: usart3@0 {
- pins1 {
- pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
- bias-disable;
- };
- };
-
- usbotg_fs_pins_a: usbotg_fs@0 {
- pins {
- pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
- <STM32F429_PA11_FUNC_OTG_FS_DM>,
- <STM32F429_PA12_FUNC_OTG_FS_DP>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- usbotg_fs_pins_b: usbotg_fs@1 {
- pins {
- pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
- <STM32F429_PB14_FUNC_OTG_HS_DM>,
- <STM32F429_PB15_FUNC_OTG_HS_DP>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- usbotg_hs_pins_a: usbotg_hs@0 {
- pins {
- pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
- <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
- <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
- <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
- <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
- <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
- <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
- <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
- <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
- <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
- <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
- <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- ethernet_mii: mii@0 {
- pins {
- pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
- <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
- <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
- <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
- <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
- <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
- <STM32F429_PA2_FUNC_ETH_MDIO>,
- <STM32F429_PC1_FUNC_ETH_MDC>,
- <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
- <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
- <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
- <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
- <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
- <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
- slew-rate = <2>;
- };
- };
-
- adc3_in8_pin: adc@200 {
- pins {
- pinmux = <STM32F429_PF10_FUNC_ANALOG>;
- };
- };
-
- pwm1_pins: pwm@1 {
- pins {
- pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
- <STM32F429_PB13_FUNC_TIM1_CH1N>,
- <STM32F429_PB12_FUNC_TIM1_BKIN>;
- };
- };
-
- pwm3_pins: pwm@3 {
- pins {
- pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
- <STM32F429_PB5_FUNC_TIM3_CH2>;
- };
- };
-
- i2c1_pins: i2c1@0 {
- pins {
- pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
- <STM32F429_PB6_FUNC_I2C1_SCL>;
- bias-disable;
- drive-open-drain;
- slew-rate = <3>;
- };
- };
-
- ltdc_pins: ltdc@0 {
- pins {
- pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
- <STM32F429_PI13_FUNC_LCD_VSYNC>,
- <STM32F429_PI14_FUNC_LCD_CLK>,
- <STM32F429_PI15_FUNC_LCD_R0>,
- <STM32F429_PJ0_FUNC_LCD_R1>,
- <STM32F429_PJ1_FUNC_LCD_R2>,
- <STM32F429_PJ2_FUNC_LCD_R3>,
- <STM32F429_PJ3_FUNC_LCD_R4>,
- <STM32F429_PJ4_FUNC_LCD_R5>,
- <STM32F429_PJ5_FUNC_LCD_R6>,
- <STM32F429_PJ6_FUNC_LCD_R7>,
- <STM32F429_PJ7_FUNC_LCD_G0>,
- <STM32F429_PJ8_FUNC_LCD_G1>,
- <STM32F429_PJ9_FUNC_LCD_G2>,
- <STM32F429_PJ10_FUNC_LCD_G3>,
- <STM32F429_PJ11_FUNC_LCD_G4>,
- <STM32F429_PJ12_FUNC_LCD_B0>,
- <STM32F429_PJ13_FUNC_LCD_B1>,
- <STM32F429_PJ14_FUNC_LCD_B2>,
- <STM32F429_PJ15_FUNC_LCD_B3>,
- <STM32F429_PK0_FUNC_LCD_G5>,
- <STM32F429_PK1_FUNC_LCD_G6>,
- <STM32F429_PK2_FUNC_LCD_G7>,
- <STM32F429_PK3_FUNC_LCD_B4>,
- <STM32F429_PK4_FUNC_LCD_B5>,
- <STM32F429_PK5_FUNC_LCD_B6>,
- <STM32F429_PK6_FUNC_LCD_B7>,
- <STM32F429_PK7_FUNC_LCD_DE>;
- slew-rate = <2>;
- };
- };
-
- dcmi_pins: dcmi@0 {
- pins {
- pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
- <STM32F429_PB7_FUNC_DCMI_VSYNC>,
- <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
- <STM32F429_PC6_FUNC_DCMI_D0>,
- <STM32F429_PC7_FUNC_DCMI_D1>,
- <STM32F429_PC8_FUNC_DCMI_D2>,
- <STM32F429_PC9_FUNC_DCMI_D3>,
- <STM32F429_PC11_FUNC_DCMI_D4>,
- <STM32F429_PD3_FUNC_DCMI_D5>,
- <STM32F429_PB8_FUNC_DCMI_D6>,
- <STM32F429_PE6_FUNC_DCMI_D7>,
- <STM32F429_PC10_FUNC_DCMI_D8>,
- <STM32F429_PC12_FUNC_DCMI_D9>,
- <STM32F429_PD6_FUNC_DCMI_D10>,
- <STM32F429_PD2_FUNC_DCMI_D11>;
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
- };
-
crc: crc@40023000 {
compatible = "st,stm32f4-crc";
reg = <0x40023000 0x400>;
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f469-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32F469i-DISCO board";
new file mode 100644
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ compatible = "st,stm32f469-pinctrl";
+
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 6>,
+ <&pinctrl 12 156 4>;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 3 163 5>;
+ };
+ };
+ };
+};
Currently, same stm32f429-pinctrl driver is used for stm32f429 and stm32f469. As pin map is different between those 2 MCUs, a stm32f469-pinctrl driver has been recently added. This patch -allows to use stm32f469-pinctrl driver for stm32f469 boards -reworks stm32 devicetree files to fit with stm32f429 / stm32f469 In the same time it fixes an issue when only MACH_STM32F469 flag is selected in menuconfig. Fixes: d28bcd53fa90 ("ARM: stm32: Introduce MACH_STM32F469 flag") Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> --- Hi Arnd, Kevin and Olof, I send this series in 4.13-rcx cycle to fix d28bcd53fa90 ("ARM: stm32: Introduce MACH_STM32F469 flag"). This patch could look "huge" to fix the issue but I prefer to send a clean patch now that send a quick fix first and a DT rework in 4.14 cycle. Let me know, if tou disagree with that. Thanks Alex