| Message ID | 20170810165403.2968.49940.stgit@gimli.home (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Hi Alex, On 10/08/2017 18:54, Alex Williamson wrote: > PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe express > capability structure for v1 devices with link, but we also have a need > in the vfio code for sizing the capability for devices without link, > such as root complex endpoints. Create a separate define for this > ending the structure before the link fields. > > Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is > currently incorrect, ending the capability length before the v2 link > fields. Rename this to specify an RC endpoint (no link) capability > length and move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link > fields as we have for the v1 version. > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > --- > include/uapi/linux/pci_regs.h | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h > index c22d3ebaca20..7439821214d1 100644 > --- a/include/uapi/linux/pci_regs.h > +++ b/include/uapi/linux/pci_regs.h > @@ -513,6 +513,7 @@ > #define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ > #define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ > #define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ > +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ nit: this should have been PCI_EXP_CAP_* from the very beginning but I guess you don't new defines to be named differently from other *SIZEOF*? > #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ > #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ > #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ > @@ -556,7 +557,7 @@ > #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ > #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ > #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ > -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ > +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */ > #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ > #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ > #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ > @@ -639,7 +640,7 @@ > #define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ > #define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ > #define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ > -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ > +#define PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ > #define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ > #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ > #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ > @@ -647,6 +648,7 @@ > #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ > #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ > #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ > +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ Looks good to me. Reviewed-by: Eric Auger <eric.auger@redhat.com> Eric > #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ > #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ > #define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ >
On Thu, Aug 10, 2017 at 10:54:31AM -0600, Alex Williamson wrote: > PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe express > capability structure for v1 devices with link, but we also have a need > in the vfio code for sizing the capability for devices without link, > such as root complex endpoints. Create a separate define for this > ending the structure before the link fields. > > Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is > currently incorrect, ending the capability length before the v2 link > fields. Rename this to specify an RC endpoint (no link) capability > length and move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link > fields as we have for the v1 version. > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Applied with Eric's reviewed-by to pci/misc for v4.14, thanks! I think there was an underscore missing here: > -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ > +#define PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */
On Tue, 22 Aug 2017 16:05:01 -0500 Bjorn Helgaas <helgaas@kernel.org> wrote: > On Thu, Aug 10, 2017 at 10:54:31AM -0600, Alex Williamson wrote: > > PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe express > > capability structure for v1 devices with link, but we also have a need > > in the vfio code for sizing the capability for devices without link, > > such as root complex endpoints. Create a separate define for this > > ending the structure before the link fields. > > > > Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is > > currently incorrect, ending the capability length before the v2 link > > fields. Rename this to specify an RC endpoint (no link) capability > > length and move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link > > fields as we have for the v1 version. > > > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > > Applied with Eric's reviewed-by to pci/misc for v4.14, thanks! > > I think there was an underscore missing here: > > > -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ > > +#define PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ Urgh, not sure how that happened. Thanks for the fixup! Alex
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index c22d3ebaca20..7439821214d1 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -513,6 +513,7 @@ #define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ #define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ #define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ #define PCI_EXP_LNKCAP 12 /* Link Capabilities */ #define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ #define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ @@ -556,7 +557,7 @@ #define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ #define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ #define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */ #define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ #define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ #define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ @@ -639,7 +640,7 @@ #define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ #define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ #define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ +#define PCI_CAP_EXP_RC ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ #define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */ @@ -647,6 +648,7 @@ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ #define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 defines the size of the PCIe express capability structure for v1 devices with link, but we also have a need in the vfio code for sizing the capability for devices without link, such as root complex endpoints. Create a separate define for this ending the structure before the link fields. Additionally, this reveals that PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 is currently incorrect, ending the capability length before the v2 link fields. Rename this to specify an RC endpoint (no link) capability length and move PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to include the link fields as we have for the v1 version. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- include/uapi/linux/pci_regs.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)