| Message ID | 20170817101140.32000-2-afaerber@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Aug 17, 2017 at 12:11:38PM +0200, Andreas Färber wrote: > Add binding for Realtek RTD1295 IRQ mux. > > Signed-off-by: Andreas Färber <afaerber@suse.de> > --- > .../interrupt-controller/realtek,rtd119x-mux.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt > new file mode 100644 > index 000000000000..4b43370e3d74 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt > @@ -0,0 +1,28 @@ > +Realtek RTD119x/129x IRQ Mux Controller > +======================================= > + > +Required properties: > + > +- compatible : Should be one of the following: > + - "realtek,rtd1295-irq-mux" > + - "realtek,rtd1295-iso-irq-mux" > +- reg : Specifies base physical address and size of the registers. > +- interrupts : Specifies the interrupt line which is mux'ed. > +- interrupt-controller : Presence indicates the node as interrupt controller. > +- #interrupt-cells : Shall be 1. See common bindings in interrupt.txt. > + > + > +Optional properties: > + > +See interrupt.txt for common bindings. What else would apply here? interrupt-parent is the only thing I see, but that's really implicit anyway. > + > + > +Example: > + > + interrupt-controller@98007000 { > + compatible = "realtek,rtd1295-iso-irq-mux"; > + reg = <0x98007000 0x100>; > + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > -- > 2.12.3 >
Am 22.08.2017 um 04:14 schrieb Rob Herring: > On Thu, Aug 17, 2017 at 12:11:38PM +0200, Andreas Färber wrote: >> Add binding for Realtek RTD1295 IRQ mux. >> >> Signed-off-by: Andreas Färber <afaerber@suse.de> >> --- >> .../interrupt-controller/realtek,rtd119x-mux.txt | 28 ++++++++++++++++++++++ >> 1 file changed, 28 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt >> >> diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt >> new file mode 100644 >> index 000000000000..4b43370e3d74 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt >> @@ -0,0 +1,28 @@ >> +Realtek RTD119x/129x IRQ Mux Controller >> +======================================= >> + >> +Required properties: >> + >> +- compatible : Should be one of the following: >> + - "realtek,rtd1295-irq-mux" >> + - "realtek,rtd1295-iso-irq-mux" >> +- reg : Specifies base physical address and size of the registers. >> +- interrupts : Specifies the interrupt line which is mux'ed. >> +- interrupt-controller : Presence indicates the node as interrupt controller. >> +- #interrupt-cells : Shall be 1. See common bindings in interrupt.txt. >> + >> + >> +Optional properties: >> + >> +See interrupt.txt for common bindings. > > What else would apply here? interrupt-parent is the only thing I see, > but that's really implicit anyway. interrupt-names would be another optional property not needed today. interrupt-controller and #interrupt-cells are common properties, too. I'll drop both lines if you prefer. Otherwise okay? Regards, Andreas >> + >> + >> +Example: >> + >> + interrupt-controller@98007000 { >> + compatible = "realtek,rtd1295-iso-irq-mux"; >> + reg = <0x98007000 0x100>; >> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + }; >> -- >> 2.12.3
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt new file mode 100644 index 000000000000..4b43370e3d74 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt @@ -0,0 +1,28 @@ +Realtek RTD119x/129x IRQ Mux Controller +======================================= + +Required properties: + +- compatible : Should be one of the following: + - "realtek,rtd1295-irq-mux" + - "realtek,rtd1295-iso-irq-mux" +- reg : Specifies base physical address and size of the registers. +- interrupts : Specifies the interrupt line which is mux'ed. +- interrupt-controller : Presence indicates the node as interrupt controller. +- #interrupt-cells : Shall be 1. See common bindings in interrupt.txt. + + +Optional properties: + +See interrupt.txt for common bindings. + + +Example: + + interrupt-controller@98007000 { + compatible = "realtek,rtd1295-iso-irq-mux"; + reg = <0x98007000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + };
Add binding for Realtek RTD1295 IRQ mux. Signed-off-by: Andreas Färber <afaerber@suse.de> --- .../interrupt-controller/realtek,rtd119x-mux.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/realtek,rtd119x-mux.txt