| Message ID | 1503066227-18251-3-git-send-email-gengdongjiu@huawei.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 2017/8/18 22:23, Dongjiu Geng wrote: > This implements APEI GHES Table by passing the error CPER info > to the guest via a fw_cfg_blob. After a CPER info is recorded, an > SEA(Synchronous External Abort)/SEI(SError Interrupt) exception > will be injected into the guest OS. > > Below is the table layout, the max number of error soure is 11, > which is classified by notification type. > > etc/acpi/tables etc/hardware_errors > ==================== ========================================== > + +--------------------------+ +------------------+ > | | HEST | | address | +--------------+ > | +--------------------------+ | registers | | Error Status | > | | GHES0 | | +----------------+ | Data Block 0 | > | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ > | | ................. | | | +----------------+ | | CPER | > | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | > | | ................. | | | +----------------+ | | | .... | > | | read_ack_register--------+-+ | | ............. | | | | CPER | > | | read_ack_preserve | | | +------------------+ | | +-+------------+ > | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | > + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | > | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ > + +--------------------------+ | | | +----------------+ | | | CPER | > | | ................. | | | +--->| | ack_value1 | | | | CPER | > | | error_status_address-----+---+ | | | +----------------+ | | | .... | > | | ................. | | | | | ............. | | | | CPER | > | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ > | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | > | | read_ack_write | | | | +----------------+ | | +------------+ > + +--------------------------| | | | | Error Status | > | | ............... | | | | | Data Block 10| > + +--------------------------+ | | +---->| +------------+ > | | GHES10 | | | | | CPER | > + +--------------------------+ | | | | CPER | > | | ................. | | | | | .... | > | | error_status_address-----+-----+ | | | CPER | > | | ................. | | +-+------------+ > | | read_ack_register--------+---------+ > | | read_ack_preserve | > | | read_ack_write | > + +--------------------------+ > > For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. > so user space must check the ack value to avoid read-write race condition. > > Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> > --- > hw/acpi/aml-build.c | 2 + > hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++ > hw/arm/virt-acpi-build.c | 6 + > include/hw/acpi/aml-build.h | 1 + > include/hw/acpi/hest_ghes.h | 47 ++++++ > 5 files changed, 401 insertions(+) > create mode 100644 hw/acpi/hest_ghes.c Don't need to add the new file to hw/acpi/Makefile.objs? > create mode 100644 include/hw/acpi/hest_ghes.h > > diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c > index 36a6cc4..6849e5f 100644 > --- a/hw/acpi/aml-build.c > +++ b/hw/acpi/aml-build.c > @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables) > tables->table_data = g_array_new(false, true /* clear */, 1); > tables->tcpalog = g_array_new(false, true /* clear */, 1); > tables->vmgenid = g_array_new(false, true /* clear */, 1); > + tables->hardware_errors = g_array_new(false, true /* clear */, 1); > tables->linker = bios_linker_loader_init(); > } > > @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre) > g_array_free(tables->table_data, true); > g_array_free(tables->tcpalog, mfre); > g_array_free(tables->vmgenid, mfre); > + g_array_free(tables->hardware_errors, mfre); > } > > /* Build rsdt table */ > diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c > new file mode 100644 > index 0000000..ff6b5ef > --- /dev/null > +++ b/hw/acpi/hest_ghes.c > @@ -0,0 +1,345 @@ > +/* > + * APEI GHES table Generation > + * > + * Copyright (C) 2017 huawei. > + * > + * Author: Dongjiu Geng <gengdongjiu@huawei.com> > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or later. > + * See the COPYING file in the top-level directory. > + * > + */ Please unify this of this file and hest_ghes.h by refering to other files. > + > +#include "qemu/osdep.h" > +#include "qmp-commands.h" unnecessary including > +#include "hw/acpi/acpi.h" > +#include "hw/acpi/aml-build.h" > +#include "hw/acpi/hest_ghes.h" > +#include "hw/nvram/fw_cfg.h" > +#include "sysemu/sysemu.h" > +#include "qemu/error-report.h" > + > +/* The structure that stands for the layout > + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob > + * > + * etc/hardware_errors > + * ========================================== > + * +------------------+ > + * | address | +--------------+ > + * | registers | | Error Status | > + * | +----------------+ | Data Block 0 | > + * | |status_address0 |------------->| +------------+ > + * | +----------------+ | | CPER | > + * | |status_address1 |----------+ | | CPER | > + * | +----------------+ | | | .... | > + * | |............. | | | | CPER | > + * | +----------------+ | | +------------+ > + * | |status_address10|-----+ | | Error Status | > + * | +----------------+ | | | Data Block 1 | > + * | |ack_value0 | | +-->| +------------+ > + * | +----------------+ | | | CPER | > + * | |ack_value1 | | | | CPER | > + * | +----------------+ | | | .... | > + * | | ............. | | | | CPER | > + * | +----------------+ | +-+------------+ > + * | |ack_value10 | | | |.......... | > + * | +----------------+ | | +------------+ > + * | | Error Status | > + * | | Data Block10 | > + * +------->+------------+ > + * | | CPER | > + * | | CPER | > + * | | .... | > + * | | CPER | > + * +-+------------+ > + */ > +struct hardware_errors_buffer { > + /* Generic Error Status Block register */ > + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED]; > + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED]; > + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED]; > +}; > + > +static int ghes_record_cper(uint64_t error_block_address, > + uint64_t error_physical_addr) > +{ > + AcpiGenericErrorStatus block; > + AcpiGenericErrorData *gdata; > + UefiCperSecMemErr *mem_err; > + uint64_t current_block_length; > + unsigned char *buffer; > + /* memory section */ > + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE, > + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, > + 0x83, 0xB1}; > + > + cpu_physical_memory_read(error_block_address, &block, > + sizeof(AcpiGenericErrorStatus)); > + > + /* Get the current generic error status block length */ > + current_block_length = sizeof(AcpiGenericErrorStatus) + > + le32_to_cpu(block.data_length); > + > + /* If the Generic Error Status Block is NULL, update > + * the block header > + */ > + if (!block.block_status) { > + block.block_status = ACPI_GEBS_UNCORRECTABLE; > + block.error_severity = ACPI_CPER_SEV_RECOVERABLE; > + } > + > + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData)); > + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr)); > + > + /* check whether it runs out of the preallocated memory */ > + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) > > + GHES_MAX_RAW_DATA_LENGTH) { > + error_report("Record CPER out of boundary!!!"); > + return GHES_CPER_FAIL; > + } > + > + /* Write back the Generic Error Status Block to guest memory */ > + cpu_physical_memory_write(error_block_address, &block, > + sizeof(AcpiGenericErrorStatus)); > + > + /* Fill in Generic Error Data Entry */ > + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + > + sizeof(UefiCperSecMemErr)); > + > + > + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); > + gdata = (AcpiGenericErrorData *)buffer; > + > + /* Memory section */ > + memcpy(&(gdata->section_type_le), &mem_section_id_le, > + sizeof(mem_section_id_le)); > + > + /* error severity is recoverable */ > + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; > + gdata->revision = 0x300; /* the revision number is 0x300 */ > + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); > + > + mem_err = (UefiCperSecMemErr *) (gdata + 1); > + > + /* User space only handle the memory section CPER */ > + > + /* Hard code to Multi-bit ECC error */ > + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); > + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); > + > + /* Record the physical address at which the memory error occurred */ > + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); > + mem_err->physical_addr = cpu_to_le32(error_physical_addr); > + > + /* Write back the Generic Error Data Entry to guest memory */ > + cpu_physical_memory_write(error_block_address + current_block_length, > + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); > + > + g_free(buffer); > + return GHES_CPER_OK; > +} > + > +static void > +build_address(GArray *table_data, BIOSLinker *linker, > + uint32_t dst_patched_offset, uint32_t src_offset, > + uint8_t address_space_id , uint8_t register_bit_width, > + uint8_t register_bit_offset, uint8_t access_size) > +{ > + uint32_t address_size = sizeof(struct AcpiGenericAddress) - > + offsetof(struct AcpiGenericAddress, address); > + > + /* Address space */ > + build_append_int_noprefix(table_data, address_space_id, 1); > + /* register bit width */ > + build_append_int_noprefix(table_data, register_bit_width, 1); > + /* register bit offset */ > + build_append_int_noprefix(table_data, register_bit_offset, 1); > + /* access size */ > + build_append_int_noprefix(table_data, access_size, 1); > + acpi_data_push(table_data, address_size); > + > + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM > + * can retrieve and read it. the address size is 64 bits. > + */ > + bios_linker_loader_add_pointer(linker, > + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), > + GHES_ERRORS_FW_CFG_FILE, src_offset); > +} > + > +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, > + BIOSLinker *linker) > +{ > + uint32_t ghes_start = table_data->len; > + uint32_t address_size, error_status_address_offset; > + uint32_t read_ack_register_offset, i; > + > + address_size = sizeof(struct AcpiGenericAddress) - > + offsetof(struct AcpiGenericAddress, address); > + > + error_status_address_offset = ghes_start + > + sizeof(AcpiHardwareErrorSourceTable) + > + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + > + offsetof(struct AcpiGenericAddress, address); > + > + read_ack_register_offset = ghes_start + > + sizeof(AcpiHardwareErrorSourceTable) + > + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + > + offsetof(struct AcpiGenericAddress, address); > + > + acpi_data_push(hardware_error, > + offsetof(struct hardware_errors_buffer, ack_value)); > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) > + /* Initialize read ack register */ > + build_append_int_noprefix((void *)hardware_error, 1, 8); > + > + /* Reserved the total size for ERRORS fw_cfg blob > + */ > + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); > + > + /* Allocate guest memory for the Data fw_cfg blob */ > + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, > + 1, false); > + /* Reserve table header size */ > + acpi_data_push(table_data, sizeof(AcpiTableHeader)); > + > + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); > + > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { > + build_append_int_noprefix(table_data, > + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ > + /* source id */ > + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); > + /* related source id */ > + build_append_int_noprefix(table_data, 0xffff, 2); > + build_append_int_noprefix(table_data, 0, 1); /* flags */ > + > + /* Currently only enable SEA notification type to avoid the kernel > + * warning, reserve the space for other notification error source > + */ > + if (i == ACPI_HEST_NOTIFY_SEA) { > + build_append_int_noprefix(table_data, 1, 1); /* enabled */ > + } else { > + build_append_int_noprefix(table_data, 0, 1); /* enabled */ > + } > + > + /* The number of error status block per generic hardware error source */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max sections per record */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max raw data length */ > + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); > + > + /* Build error status address*/ > + build_address(table_data, linker, error_status_address_offset + i * > + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, > + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); > + > + /* Hardware error notification structure */ > + build_append_int_noprefix(table_data, i, 1); /* type */ > + /* length */ > + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); > + build_append_int_noprefix(table_data, 0, 26); > + > + /* Error Status Block Length */ > + build_append_int_noprefix(table_data, > + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); > + > + /* Build read ack register */ > + build_address(table_data, linker, read_ack_register_offset + i * > + sizeof(AcpiGenericHardwareErrorSourceV2), > + offsetof(struct hardware_errors_buffer, ack_value) + > + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */); > + > + /* Read ack preserve */ > + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); > + > + /* Read ack write */ > + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); > + } > + > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) > + /* Patch address of generic error status block into > + * the address register so OSPM can retrieve and read it. > + */ > + bios_linker_loader_add_pointer(linker, > + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size, > + GHES_ERRORS_FW_CFG_FILE, > + offsetof(struct hardware_errors_buffer, gesb) + > + i * GHES_MAX_RAW_DATA_LENGTH); > + > + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob > + * so QEMU can write the ERRORS there. The address is expected to be > + * < 4GB, but write 64 bits anyway. > + */ > + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE, > + 0, address_size, GHES_ERRORS_FW_CFG_FILE, > + offsetof(struct hardware_errors_buffer, gesb)); > + > + build_header(linker, table_data, > + (void *)(table_data->data + ghes_start), "HEST", > + table_data->len - ghes_start, 1, NULL, "GHES"); > +} > + > +static GhesState ges; > +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error) > +{ > + > + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH; > + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size; > + > + /* Create a read-only fw_cfg file for GHES */ > + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data, > + size); > + /* Create a read-write fw_cfg file for Address */ > + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, > + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false); > +} > + > +bool ghes_update_guest(uint32_t notify, uint64_t physical_address) > +{ > + uint64_t error_block_addr; > + uint64_t ack_value_addr, ack_value = 0; > + int loop = 0, ack_value_size; > + bool ret = GHES_CPER_FAIL; > + > + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) - > + offsetof(struct hardware_errors_buffer, ack_value)) / > + GHES_ACPI_HEST_NOTIFY_RESERVED; > + > + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) { > + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH; > + error_block_addr = le32_to_cpu(error_block_addr); > + > + ack_value_addr = ges.ghes_addr_le - > + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size; > +retry: > + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size); > + if (!ack_value) { > + if (loop < 3) { > + usleep(100 * 1000); > + loop++; > + goto retry; > + } else { > + error_report("Last time OSPM does not acknowledge the error," > + " record CPER failed this time, set the ack value to" > + " avoid blocking next time CPER record! exit"); > + ack_value = 1; > + cpu_physical_memory_write(ack_value_addr, > + &ack_value, ack_value_size); > + return ret; > + } > + } else { > + /* A zero value in ghes_addr means that BIOS has not yet written > + * the address > + */ > + if (error_block_addr) { > + ack_value = 0; > + cpu_physical_memory_write(ack_value_addr, > + &ack_value, ack_value_size); > + ret = ghes_record_cper(error_block_addr, physical_address); > + } > + } > + } > + return ret; > +} > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 3d78ff6..def1ec1 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -45,6 +45,7 @@ > #include "hw/arm/virt.h" > #include "sysemu/numa.h" > #include "kvm_arm.h" > +#include "hw/acpi/hest_ghes.h" > > #define ARM_SPI_BASE 32 > #define ACPI_POWER_BUTTON_DEVICE "PWRB" > @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > acpi_add_table(table_offsets, tables_blob); > build_spcr(tables_blob, tables->linker, vms); > > + acpi_add_table(table_offsets, tables_blob); > + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); > + So we add this table unconditionally. Is there any bad impact if QEMU runs on old kvm? Does it need to check whether KVM supports RAS? > if (nb_numa_nodes > 0) { > acpi_add_table(table_offsets, tables_blob); > build_srat(tables_blob, tables->linker, vms); > @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms) > fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data, > acpi_data_len(tables.tcpalog)); > > + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors); > + > build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, > ACPI_BUILD_RSDP_FILE, 0); > > diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h > index 88d0738..7f7b55c 100644 > --- a/include/hw/acpi/aml-build.h > +++ b/include/hw/acpi/aml-build.h > @@ -211,6 +211,7 @@ struct AcpiBuildTables { > GArray *rsdp; > GArray *tcpalog; > GArray *vmgenid; > + GArray *hardware_errors; > BIOSLinker *linker; > } AcpiBuildTables; > > diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h > new file mode 100644 > index 0000000..0772756 > --- /dev/null > +++ b/include/hw/acpi/hest_ghes.h > @@ -0,0 +1,47 @@ > +/* > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Authors: > + * Dongjiu Geng <gengdongjiu@huawei.com> > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef ACPI_GHES_H > +#define ACPI_GHES_H > + > +#include "hw/acpi/bios-linker-loader.h" > + > +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" > +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" > + > +#define GHES_GAS_ADDRESS_OFFSET 4 > +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20 > +#define GHES_NOTIFICATION_STRUCTURE 32 > + > +#define GHES_CPER_OK 1 > +#define GHES_CPER_FAIL 0 > + > +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11 > +/* The max size in Bytes for one error block */ > +#define GHES_MAX_RAW_DATA_LENGTH 0x1000 > + > + > +typedef struct GhesState { > + uint64_t ghes_addr_le; > +} GhesState; > + > +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, > + BIOSLinker *linker); > +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors); > +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr); > +#endif >
Hi Shannon, On 2017/8/24 21:03, Shannon Zhao wrote: > > > On 2017/8/18 22:23, Dongjiu Geng wrote: >> This implements APEI GHES Table by passing the error CPER info >> to the guest via a fw_cfg_blob. After a CPER info is recorded, an >> SEA(Synchronous External Abort)/SEI(SError Interrupt) exception >> will be injected into the guest OS. >> >> Below is the table layout, the max number of error soure is 11, >> which is classified by notification type. >> >> etc/acpi/tables etc/hardware_errors >> ==================== ========================================== >> + +--------------------------+ +------------------+ >> | | HEST | | address | +--------------+ >> | +--------------------------+ | registers | | Error Status | >> | | GHES0 | | +----------------+ | Data Block 0 | >> | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ >> | | ................. | | | +----------------+ | | CPER | >> | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | >> | | ................. | | | +----------------+ | | | .... | >> | | read_ack_register--------+-+ | | ............. | | | | CPER | >> | | read_ack_preserve | | | +------------------+ | | +-+------------+ >> | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | >> + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | >> | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ >> + +--------------------------+ | | | +----------------+ | | | CPER | >> | | ................. | | | +--->| | ack_value1 | | | | CPER | >> | | error_status_address-----+---+ | | | +----------------+ | | | .... | >> | | ................. | | | | | ............. | | | | CPER | >> | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ >> | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | >> | | read_ack_write | | | | +----------------+ | | +------------+ >> + +--------------------------| | | | | Error Status | >> | | ............... | | | | | Data Block 10| >> + +--------------------------+ | | +---->| +------------+ >> | | GHES10 | | | | | CPER | >> + +--------------------------+ | | | | CPER | >> | | ................. | | | | | .... | >> | | error_status_address-----+-----+ | | | CPER | >> | | ................. | | +-+------------+ >> | | read_ack_register--------+---------+ >> | | read_ack_preserve | >> | | read_ack_write | >> + +--------------------------+ >> >> For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. >> so user space must check the ack value to avoid read-write race condition. >> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> >> --- >> hw/acpi/aml-build.c | 2 + >> hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++ >> hw/arm/virt-acpi-build.c | 6 + >> include/hw/acpi/aml-build.h | 1 + >> include/hw/acpi/hest_ghes.h | 47 ++++++ >> 5 files changed, 401 insertions(+) >> create mode 100644 hw/acpi/hest_ghes.c > Don't need to add the new file to hw/acpi/Makefile.objs? I modified the Makefile.objs in another patch. > >> create mode 100644 include/hw/acpi/hest_ghes.h >> >> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c >> index 36a6cc4..6849e5f 100644 >> --- a/hw/acpi/aml-build.c >> +++ b/hw/acpi/aml-build.c >> @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables) >> tables->table_data = g_array_new(false, true /* clear */, 1); >> tables->tcpalog = g_array_new(false, true /* clear */, 1); >> tables->vmgenid = g_array_new(false, true /* clear */, 1); >> + tables->hardware_errors = g_array_new(false, true /* clear */, 1); >> tables->linker = bios_linker_loader_init(); >> } >> >> @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre) >> g_array_free(tables->table_data, true); >> g_array_free(tables->tcpalog, mfre); >> g_array_free(tables->vmgenid, mfre); >> + g_array_free(tables->hardware_errors, mfre); >> } >> >> /* Build rsdt table */ >> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c >> new file mode 100644 >> index 0000000..ff6b5ef >> --- /dev/null >> +++ b/hw/acpi/hest_ghes.c >> @@ -0,0 +1,345 @@ >> +/* >> + * APEI GHES table Generation >> + * >> + * Copyright (C) 2017 huawei. >> + * >> + * Author: Dongjiu Geng <gengdongjiu@huawei.com> >> + * >> + * This work is licensed under the terms of the GNU GPL, version 2 or later. >> + * See the COPYING file in the top-level directory. >> + * >> + */ > Please unify this of this file and hest_ghes.h by refering to other files. Ok, thanks. > >> + >> +#include "qemu/osdep.h" >> +#include "qmp-commands.h" > unnecessary including I will remove it. > >> +#include "hw/acpi/acpi.h" >> +#include "hw/acpi/aml-build.h" >> +#include "hw/acpi/hest_ghes.h" >> +#include "hw/nvram/fw_cfg.h" >> +#include "sysemu/sysemu.h" >> +#include "qemu/error-report.h" >> + >> +/* The structure that stands for the layout >> + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob >> + * >> + * etc/hardware_errors >> + * ========================================== >> + * +------------------+ >> + * | address | +--------------+ >> + * | registers | | Error Status | >> + * | +----------------+ | Data Block 0 | >> + * | |status_address0 |------------->| +------------+ >> + * | +----------------+ | | CPER | >> + * | |status_address1 |----------+ | | CPER | >> + * | +----------------+ | | | .... | >> + * | |............. | | | | CPER | >> + * | +----------------+ | | +------------+ >> + * | |status_address10|-----+ | | Error Status | >> + * | +----------------+ | | | Data Block 1 | >> + * | |ack_value0 | | +-->| +------------+ >> + * | +----------------+ | | | CPER | >> + * | |ack_value1 | | | | CPER | >> + * | +----------------+ | | | .... | >> + * | | ............. | | | | CPER | >> + * | +----------------+ | +-+------------+ >> + * | |ack_value10 | | | |.......... | >> + * | +----------------+ | | +------------+ >> + * | | Error Status | >> + * | | Data Block10 | >> + * +------->+------------+ >> + * | | CPER | >> + * | | CPER | >> + * | | .... | >> + * | | CPER | >> + * +-+------------+ >> + */ >> +struct hardware_errors_buffer { >> + /* Generic Error Status Block register */ >> + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED]; >> + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED]; >> + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED]; >> +}; >> + >> +static int ghes_record_cper(uint64_t error_block_address, >> + uint64_t error_physical_addr) >> +{ >> + AcpiGenericErrorStatus block; >> + AcpiGenericErrorData *gdata; >> + UefiCperSecMemErr *mem_err; >> + uint64_t current_block_length; >> + unsigned char *buffer; >> + /* memory section */ >> + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE, >> + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, >> + 0x83, 0xB1}; >> + >> + cpu_physical_memory_read(error_block_address, &block, >> + sizeof(AcpiGenericErrorStatus)); >> + >> + /* Get the current generic error status block length */ >> + current_block_length = sizeof(AcpiGenericErrorStatus) + >> + le32_to_cpu(block.data_length); >> + >> + /* If the Generic Error Status Block is NULL, update >> + * the block header >> + */ >> + if (!block.block_status) { >> + block.block_status = ACPI_GEBS_UNCORRECTABLE; >> + block.error_severity = ACPI_CPER_SEV_RECOVERABLE; >> + } >> + >> + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData)); >> + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr)); >> + >> + /* check whether it runs out of the preallocated memory */ >> + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) > >> + GHES_MAX_RAW_DATA_LENGTH) { >> + error_report("Record CPER out of boundary!!!"); >> + return GHES_CPER_FAIL; >> + } >> + >> + /* Write back the Generic Error Status Block to guest memory */ >> + cpu_physical_memory_write(error_block_address, &block, >> + sizeof(AcpiGenericErrorStatus)); >> + >> + /* Fill in Generic Error Data Entry */ >> + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + >> + sizeof(UefiCperSecMemErr)); >> + >> + >> + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); >> + gdata = (AcpiGenericErrorData *)buffer; >> + >> + /* Memory section */ >> + memcpy(&(gdata->section_type_le), &mem_section_id_le, >> + sizeof(mem_section_id_le)); >> + >> + /* error severity is recoverable */ >> + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; >> + gdata->revision = 0x300; /* the revision number is 0x300 */ >> + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); >> + >> + mem_err = (UefiCperSecMemErr *) (gdata + 1); >> + >> + /* User space only handle the memory section CPER */ >> + >> + /* Hard code to Multi-bit ECC error */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); >> + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); >> + >> + /* Record the physical address at which the memory error occurred */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); >> + mem_err->physical_addr = cpu_to_le32(error_physical_addr); >> + >> + /* Write back the Generic Error Data Entry to guest memory */ >> + cpu_physical_memory_write(error_block_address + current_block_length, >> + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); >> + >> + g_free(buffer); >> + return GHES_CPER_OK; >> +} >> + >> +static void >> +build_address(GArray *table_data, BIOSLinker *linker, >> + uint32_t dst_patched_offset, uint32_t src_offset, >> + uint8_t address_space_id , uint8_t register_bit_width, >> + uint8_t register_bit_offset, uint8_t access_size) >> +{ >> + uint32_t address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); >> + >> + /* Address space */ >> + build_append_int_noprefix(table_data, address_space_id, 1); >> + /* register bit width */ >> + build_append_int_noprefix(table_data, register_bit_width, 1); >> + /* register bit offset */ >> + build_append_int_noprefix(table_data, register_bit_offset, 1); >> + /* access size */ >> + build_append_int_noprefix(table_data, access_size, 1); >> + acpi_data_push(table_data, address_size); >> + >> + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM >> + * can retrieve and read it. the address size is 64 bits. >> + */ >> + bios_linker_loader_add_pointer(linker, >> + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), >> + GHES_ERRORS_FW_CFG_FILE, src_offset); >> +} >> + >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker) >> +{ >> + uint32_t ghes_start = table_data->len; >> + uint32_t address_size, error_status_address_offset; >> + uint32_t read_ack_register_offset, i; >> + >> + address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); >> + >> + error_status_address_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + >> + offsetof(struct AcpiGenericAddress, address); >> + >> + read_ack_register_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + >> + offsetof(struct AcpiGenericAddress, address); >> + >> + acpi_data_push(hardware_error, >> + offsetof(struct hardware_errors_buffer, ack_value)); >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) >> + /* Initialize read ack register */ >> + build_append_int_noprefix((void *)hardware_error, 1, 8); >> + >> + /* Reserved the total size for ERRORS fw_cfg blob >> + */ >> + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); >> + >> + /* Allocate guest memory for the Data fw_cfg blob */ >> + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, >> + 1, false); >> + /* Reserve table header size */ >> + acpi_data_push(table_data, sizeof(AcpiTableHeader)); >> + >> + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); >> + >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { >> + build_append_int_noprefix(table_data, >> + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ >> + /* source id */ >> + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); >> + /* related source id */ >> + build_append_int_noprefix(table_data, 0xffff, 2); >> + build_append_int_noprefix(table_data, 0, 1); /* flags */ >> + >> + /* Currently only enable SEA notification type to avoid the kernel >> + * warning, reserve the space for other notification error source >> + */ >> + if (i == ACPI_HEST_NOTIFY_SEA) { >> + build_append_int_noprefix(table_data, 1, 1); /* enabled */ >> + } else { >> + build_append_int_noprefix(table_data, 0, 1); /* enabled */ >> + } >> + >> + /* The number of error status block per generic hardware error source */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max sections per record */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max raw data length */ >> + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + /* Build error status address*/ >> + build_address(table_data, linker, error_status_address_offset + i * >> + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, >> + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); >> + >> + /* Hardware error notification structure */ >> + build_append_int_noprefix(table_data, i, 1); /* type */ >> + /* length */ >> + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); >> + build_append_int_noprefix(table_data, 0, 26); >> + >> + /* Error Status Block Length */ >> + build_append_int_noprefix(table_data, >> + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); >> + >> + /* Build read ack register */ >> + build_address(table_data, linker, read_ack_register_offset + i * >> + sizeof(AcpiGenericHardwareErrorSourceV2), >> + offsetof(struct hardware_errors_buffer, ack_value) + >> + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */); >> + >> + /* Read ack preserve */ >> + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); >> + >> + /* Read ack write */ >> + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); >> + } >> + >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) >> + /* Patch address of generic error status block into >> + * the address register so OSPM can retrieve and read it. >> + */ >> + bios_linker_loader_add_pointer(linker, >> + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size, >> + GHES_ERRORS_FW_CFG_FILE, >> + offsetof(struct hardware_errors_buffer, gesb) + >> + i * GHES_MAX_RAW_DATA_LENGTH); >> + >> + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob >> + * so QEMU can write the ERRORS there. The address is expected to be >> + * < 4GB, but write 64 bits anyway. >> + */ >> + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE, >> + 0, address_size, GHES_ERRORS_FW_CFG_FILE, >> + offsetof(struct hardware_errors_buffer, gesb)); >> + >> + build_header(linker, table_data, >> + (void *)(table_data->data + ghes_start), "HEST", >> + table_data->len - ghes_start, 1, NULL, "GHES"); >> +} >> + >> +static GhesState ges; >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error) >> +{ >> + >> + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH; >> + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size; >> + >> + /* Create a read-only fw_cfg file for GHES */ >> + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data, >> + size); >> + /* Create a read-write fw_cfg file for Address */ >> + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, >> + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false); >> +} >> + >> +bool ghes_update_guest(uint32_t notify, uint64_t physical_address) >> +{ >> + uint64_t error_block_addr; >> + uint64_t ack_value_addr, ack_value = 0; >> + int loop = 0, ack_value_size; >> + bool ret = GHES_CPER_FAIL; >> + >> + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) - >> + offsetof(struct hardware_errors_buffer, ack_value)) / >> + GHES_ACPI_HEST_NOTIFY_RESERVED; >> + >> + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) { >> + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH; >> + error_block_addr = le32_to_cpu(error_block_addr); >> + >> + ack_value_addr = ges.ghes_addr_le - >> + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size; >> +retry: >> + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size); >> + if (!ack_value) { >> + if (loop < 3) { >> + usleep(100 * 1000); >> + loop++; >> + goto retry; >> + } else { >> + error_report("Last time OSPM does not acknowledge the error," >> + " record CPER failed this time, set the ack value to" >> + " avoid blocking next time CPER record! exit"); >> + ack_value = 1; >> + cpu_physical_memory_write(ack_value_addr, >> + &ack_value, ack_value_size); >> + return ret; >> + } >> + } else { >> + /* A zero value in ghes_addr means that BIOS has not yet written >> + * the address >> + */ >> + if (error_block_addr) { >> + ack_value = 0; >> + cpu_physical_memory_write(ack_value_addr, >> + &ack_value, ack_value_size); >> + ret = ghes_record_cper(error_block_addr, physical_address); >> + } >> + } >> + } >> + return ret; >> +} >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >> index 3d78ff6..def1ec1 100644 >> --- a/hw/arm/virt-acpi-build.c >> +++ b/hw/arm/virt-acpi-build.c >> @@ -45,6 +45,7 @@ >> #include "hw/arm/virt.h" >> #include "sysemu/numa.h" >> #include "kvm_arm.h" >> +#include "hw/acpi/hest_ghes.h" >> >> #define ARM_SPI_BASE 32 >> #define ACPI_POWER_BUTTON_DEVICE "PWRB" >> @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >> acpi_add_table(table_offsets, tables_blob); >> build_spcr(tables_blob, tables->linker, vms); >> >> + acpi_add_table(table_offsets, tables_blob); >> + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); >> + > So we add this table unconditionally. Is there any bad impact if QEMU > runs on old kvm? Does it need to check whether KVM supports RAS? this table is added before guest OS boot. so can not use KVM to check it. if the old kvm does not support RAS, it does not have bad impact. only waste table memory. May be we can make it as device? if this device is enabled in the qemu boot parameters, then we will add this table? > >> if (nb_numa_nodes > 0) { >> acpi_add_table(table_offsets, tables_blob); >> build_srat(tables_blob, tables->linker, vms); >> @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms) >> fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data, >> acpi_data_len(tables.tcpalog)); >> >> + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors); >> + >> build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, >> ACPI_BUILD_RSDP_FILE, 0); >> >> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h >> index 88d0738..7f7b55c 100644 >> --- a/include/hw/acpi/aml-build.h >> +++ b/include/hw/acpi/aml-build.h >> @@ -211,6 +211,7 @@ struct AcpiBuildTables { >> GArray *rsdp; >> GArray *tcpalog; >> GArray *vmgenid; >> + GArray *hardware_errors; >> BIOSLinker *linker; >> } AcpiBuildTables; >> >> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h >> new file mode 100644 >> index 0000000..0772756 >> --- /dev/null >> +++ b/include/hw/acpi/hest_ghes.h >> @@ -0,0 +1,47 @@ >> +/* >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Authors: >> + * Dongjiu Geng <gengdongjiu@huawei.com> >> + * >> + * You should have received a copy of the GNU General Public License along >> + * with this program; if not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#ifndef ACPI_GHES_H >> +#define ACPI_GHES_H >> + >> +#include "hw/acpi/bios-linker-loader.h" >> + >> +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" >> +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" >> + >> +#define GHES_GAS_ADDRESS_OFFSET 4 >> +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20 >> +#define GHES_NOTIFICATION_STRUCTURE 32 >> + >> +#define GHES_CPER_OK 1 >> +#define GHES_CPER_FAIL 0 >> + >> +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11 >> +/* The max size in Bytes for one error block */ >> +#define GHES_MAX_RAW_DATA_LENGTH 0x1000 >> + >> + >> +typedef struct GhesState { >> + uint64_t ghes_addr_le; >> +} GhesState; >> + >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker); >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors); >> +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr); >> +#endif >> > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2017/8/25 19:20, gengdongjiu wrote: >>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >>> >> index 3d78ff6..def1ec1 100644 >>> >> --- a/hw/arm/virt-acpi-build.c >>> >> +++ b/hw/arm/virt-acpi-build.c >>> >> @@ -45,6 +45,7 @@ >>> >> #include "hw/arm/virt.h" >>> >> #include "sysemu/numa.h" >>> >> #include "kvm_arm.h" >>> >> +#include "hw/acpi/hest_ghes.h" >>> >> >>> >> #define ARM_SPI_BASE 32 >>> >> #define ACPI_POWER_BUTTON_DEVICE "PWRB" >>> >> @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >>> >> acpi_add_table(table_offsets, tables_blob); >>> >> build_spcr(tables_blob, tables->linker, vms); >>> >> >>> >> + acpi_add_table(table_offsets, tables_blob); >>> >> + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); >>> >> + >> > So we add this table unconditionally. Is there any bad impact if QEMU >> > runs on old kvm? Does it need to check whether KVM supports RAS? > this table is added before guest OS boot. so can not use KVM to check it. No, we can check the RAS capability when we create vcpus like you done in another patch ans can use that in table generation. > if the old kvm does not support RAS, it does not have bad impact. only waste table memory. > May be we can make it as device? if this device is enabled in the qemu > boot parameters, then we will add this table? > And you need to add a option to virt machine for (migration) compatibility. On new virt machine it's on by default while off for old ones. Thanks,
Hi Shannon, On 2017/8/26 9:08, Shannon Zhao wrote: > > > On 2017/8/25 19:20, gengdongjiu wrote: >>>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >>>>>> index 3d78ff6..def1ec1 100644 >>>>>> --- a/hw/arm/virt-acpi-build.c >>>>>> +++ b/hw/arm/virt-acpi-build.c >>>>>> @@ -45,6 +45,7 @@ >>>>>> #include "hw/arm/virt.h" >>>>>> #include "sysemu/numa.h" >>>>>> #include "kvm_arm.h" >>>>>> +#include "hw/acpi/hest_ghes.h" >>>>>> >>>>>> #define ARM_SPI_BASE 32 >>>>>> #define ACPI_POWER_BUTTON_DEVICE "PWRB" >>>>>> @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >>>>>> acpi_add_table(table_offsets, tables_blob); >>>>>> build_spcr(tables_blob, tables->linker, vms); >>>>>> >>>>>> + acpi_add_table(table_offsets, tables_blob); >>>>>> + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); >>>>>> + >>>> So we add this table unconditionally. Is there any bad impact if QEMU >>>> runs on old kvm? Does it need to check whether KVM supports RAS? >> this table is added before guest OS boot. so can not use KVM to check it. > No, we can check the RAS capability when we create vcpus like you done > in another patch ans can use that in table generation. understand your meaning. ARM James ever have below comments about the table generation. ---------------------------------------------------------------------------------- But you can use APEI in a guest on CPUs without the RAS extensions: the host may signal memory errors to Qemu for any number of reasons, user-space shouldn't care how it knows. Examples are PCI-AER, any APEI event notified by polling or one of the flavours of irq. I would expect Qemu to generate a HEST based on its abilities, i.e. if it supports any mechanism of notifying the guest about errors. Choosing the mechanism then depends on the type of error. Ideally the Qemu code for HEST/GHES/CPER generation code using some of the irqs and polling could be shared with x86, as these should be possible using common KVM APIs. ----------------------------------------------------------------------------------- He means we can use APEI on CPUs without RAS and may be share this code with x86, if Qemu can support any mechanism of notifying the guest about errors, it should be generate the table. Now we depend on the macro KVM_HAVE_MCE_INJECTION to decide whether Qemu can support notifying the guest. what do you think which we should be dependent on to generate the table? > >> if the old kvm does not support RAS, it does not have bad impact. only waste table memory. >> May be we can make it as device? if this device is enabled in the qemu >> boot parameters, then we will add this table? >> > > And you need to add a option to virt machine for (migration) > compatibility. On new virt machine it's on by default while off for old > ones. ok. > > Thanks, > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 18 Aug 2017 22:23:43 +0800 Dongjiu Geng <gengdongjiu@huawei.com> wrote: > This implements APEI GHES Table by passing the error CPER info > to the guest via a fw_cfg_blob. After a CPER info is recorded, an > SEA(Synchronous External Abort)/SEI(SError Interrupt) exception > will be injected into the guest OS. it's a bit complex patch/functionality so I've just mosty skimmed and commented only on structure of the patch and changes I'd like to see so it would be more structured and review-able. I'd suggest to add doc patch first which will describe how it's supposed to work between QEMU/firmware/guest OS with expected flows. > Below is the table layout, the max number of error soure is 11, > which is classified by notification type. > > etc/acpi/tables etc/hardware_errors > ==================== ========================================== > + +--------------------------+ +------------------+ > | | HEST | | address | +--------------+ > | +--------------------------+ | registers | | Error Status | > | | GHES0 | | +----------------+ | Data Block 0 | > | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ > | | ................. | | | +----------------+ | | CPER | > | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | > | | ................. | | | +----------------+ | | | .... | > | | read_ack_register--------+-+ | | ............. | | | | CPER | > | | read_ack_preserve | | | +------------------+ | | +-+------------+ > | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | > + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | > | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ > + +--------------------------+ | | | +----------------+ | | | CPER | > | | ................. | | | +--->| | ack_value1 | | | | CPER | > | | error_status_address-----+---+ | | | +----------------+ | | | .... | > | | ................. | | | | | ............. | | | | CPER | > | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ > | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | > | | read_ack_write | | | | +----------------+ | | +------------+ > + +--------------------------| | | | | Error Status | > | | ............... | | | | | Data Block 10| > + +--------------------------+ | | +---->| +------------+ > | | GHES10 | | | | | CPER | > + +--------------------------+ | | | | CPER | > | | ................. | | | | | .... | > | | error_status_address-----+-----+ | | | CPER | > | | ................. | | +-+------------+ > | | read_ack_register--------+---------+ > | | read_ack_preserve | > | | read_ack_write | > + +--------------------------+ these diagram shows relations between tables which not necessarily bad but as layout it's useless. * Probably there is not much sense to have HEST table here, it's described well enough in spec. You might just put reference here. * these diagrams should go into doc/spec patch * when you describe layout you need to show what and at what offsets in which order in which blob/file is located. See ACPI spec for example and/or docs/specs/acpi_nvdimm.txt docs/specs/acpi_mem_hotplug.txt for inspiration. > For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. > so user space must check the ack value to avoid read-write race condition. > > Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> > --- > hw/acpi/aml-build.c | 2 + > hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++ > hw/arm/virt-acpi-build.c | 6 + > include/hw/acpi/aml-build.h | 1 + > include/hw/acpi/hest_ghes.h | 47 ++++++ > 5 files changed, 401 insertions(+) > create mode 100644 hw/acpi/hest_ghes.c > create mode 100644 include/hw/acpi/hest_ghes.h > > diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c > index 36a6cc4..6849e5f 100644 > --- a/hw/acpi/aml-build.c > +++ b/hw/acpi/aml-build.c > @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables) > tables->table_data = g_array_new(false, true /* clear */, 1); > tables->tcpalog = g_array_new(false, true /* clear */, 1); > tables->vmgenid = g_array_new(false, true /* clear */, 1); > + tables->hardware_errors = g_array_new(false, true /* clear */, 1); > tables->linker = bios_linker_loader_init(); > } > > @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre) > g_array_free(tables->table_data, true); > g_array_free(tables->tcpalog, mfre); > g_array_free(tables->vmgenid, mfre); > + g_array_free(tables->hardware_errors, mfre); > } > > /* Build rsdt table */ > diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c > new file mode 100644 > index 0000000..ff6b5ef > --- /dev/null > +++ b/hw/acpi/hest_ghes.c > @@ -0,0 +1,345 @@ > +/* > + * APEI GHES table Generation > + * > + * Copyright (C) 2017 huawei. > + * > + * Author: Dongjiu Geng <gengdongjiu@huawei.com> > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or later. > + * See the COPYING file in the top-level directory. > + * > + */ > + > +#include "qemu/osdep.h" > +#include "qmp-commands.h" > +#include "hw/acpi/acpi.h" > +#include "hw/acpi/aml-build.h" > +#include "hw/acpi/hest_ghes.h" > +#include "hw/nvram/fw_cfg.h" > +#include "sysemu/sysemu.h" > +#include "qemu/error-report.h" > + > +/* The structure that stands for the layout > + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob > + * > + * etc/hardware_errors > + * ========================================== > + * +------------------+ > + * | address | +--------------+ > + * | registers | | Error Status | > + * | +----------------+ | Data Block 0 | > + * | |status_address0 |------------->| +------------+ > + * | +----------------+ | | CPER | > + * | |status_address1 |----------+ | | CPER | > + * | +----------------+ | | | .... | > + * | |............. | | | | CPER | > + * | +----------------+ | | +------------+ > + * | |status_address10|-----+ | | Error Status | > + * | +----------------+ | | | Data Block 1 | > + * | |ack_value0 | | +-->| +------------+ > + * | +----------------+ | | | CPER | > + * | |ack_value1 | | | | CPER | > + * | +----------------+ | | | .... | > + * | | ............. | | | | CPER | > + * | +----------------+ | +-+------------+ > + * | |ack_value10 | | | |.......... | > + * | +----------------+ | | +------------+ > + * | | Error Status | > + * | | Data Block10 | > + * +------->+------------+ > + * | | CPER | > + * | | CPER | > + * | | .... | > + * | | CPER | > + * +-+------------+ > + */ > +struct hardware_errors_buffer { > + /* Generic Error Status Block register */ > + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED]; > + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED]; > + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED]; > +}; > + > +static int ghes_record_cper(uint64_t error_block_address, > + uint64_t error_physical_addr) > +{ > + AcpiGenericErrorStatus block; > + AcpiGenericErrorData *gdata; > + UefiCperSecMemErr *mem_err; > + uint64_t current_block_length; > + unsigned char *buffer; > + /* memory section */ > + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE, > + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, > + 0x83, 0xB1}; > + > + cpu_physical_memory_read(error_block_address, &block, > + sizeof(AcpiGenericErrorStatus)); > + > + /* Get the current generic error status block length */ > + current_block_length = sizeof(AcpiGenericErrorStatus) + > + le32_to_cpu(block.data_length); > + > + /* If the Generic Error Status Block is NULL, update > + * the block header > + */ > + if (!block.block_status) { > + block.block_status = ACPI_GEBS_UNCORRECTABLE; > + block.error_severity = ACPI_CPER_SEV_RECOVERABLE; > + } > + > + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData)); > + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr)); > + > + /* check whether it runs out of the preallocated memory */ > + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) > > + GHES_MAX_RAW_DATA_LENGTH) { > + error_report("Record CPER out of boundary!!!"); > + return GHES_CPER_FAIL; > + } > + > + /* Write back the Generic Error Status Block to guest memory */ > + cpu_physical_memory_write(error_block_address, &block, > + sizeof(AcpiGenericErrorStatus)); > + > + /* Fill in Generic Error Data Entry */ > + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + > + sizeof(UefiCperSecMemErr)); > + > + > + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); looks redundant, g_malloc0 does it for you > + gdata = (AcpiGenericErrorData *)buffer; > + > + /* Memory section */ > + memcpy(&(gdata->section_type_le), &mem_section_id_le, > + sizeof(mem_section_id_le)); > + > + /* error severity is recoverable */ > + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; > + gdata->revision = 0x300; /* the revision number is 0x300 */ > + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); > + > + mem_err = (UefiCperSecMemErr *) (gdata + 1); > + > + /* User space only handle the memory section CPER */ > + > + /* Hard code to Multi-bit ECC error */ > + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); > + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); > + > + /* Record the physical address at which the memory error occurred */ > + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); > + mem_err->physical_addr = cpu_to_le32(error_physical_addr); I'd prefer for you to use build_append_int_noprefix() API to compose whole error status block and try to get rid of most structures you introduce in patch 1/6, as they will be left unused after that. > + > + /* Write back the Generic Error Data Entry to guest memory */ > + cpu_physical_memory_write(error_block_address + current_block_length, > + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); > + > + g_free(buffer); > + return GHES_CPER_OK; > +} > + > +static void > +build_address(GArray *table_data, BIOSLinker *linker, > + uint32_t dst_patched_offset, uint32_t src_offset, > + uint8_t address_space_id , uint8_t register_bit_width, > + uint8_t register_bit_offset, uint8_t access_size) > +{ > + uint32_t address_size = sizeof(struct AcpiGenericAddress) - > + offsetof(struct AcpiGenericAddress, address); > + > + /* Address space */ > + build_append_int_noprefix(table_data, address_space_id, 1); > + /* register bit width */ > + build_append_int_noprefix(table_data, register_bit_width, 1); > + /* register bit offset */ > + build_append_int_noprefix(table_data, register_bit_offset, 1); > + /* access size */ > + build_append_int_noprefix(table_data, access_size, 1); > + acpi_data_push(table_data, address_size); > + > + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM > + * can retrieve and read it. the address size is 64 bits. > + */ > + bios_linker_loader_add_pointer(linker, > + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), > + GHES_ERRORS_FW_CFG_FILE, src_offset); > +} It's mostly generic GAS structure with linker addition. I'd suggest to reuse something like https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c to build GAS and use bios_linker_loader_add_pointer() directly in ghes_build_acpi(). > +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, > + BIOSLinker *linker) > +{ > + uint32_t ghes_start = table_data->len; > + uint32_t address_size, error_status_address_offset; > + uint32_t read_ack_register_offset, i; > + > + address_size = sizeof(struct AcpiGenericAddress) - > + offsetof(struct AcpiGenericAddress, address); it's confusing name for var, AcpiGenericAddress::address is fixed unsigned 64 bit integer per spec also, I'm not sure why it's needed at all. > + > + error_status_address_offset = ghes_start + > + sizeof(AcpiHardwareErrorSourceTable) + > + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + > + offsetof(struct AcpiGenericAddress, address); > + > + read_ack_register_offset = ghes_start + > + sizeof(AcpiHardwareErrorSourceTable) + > + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + > + offsetof(struct AcpiGenericAddress, address); it's really hard to get why you use offsetof() so much in this function, to me above code totally unreadable. > + acpi_data_push(hardware_error, > + offsetof(struct hardware_errors_buffer, ack_value)); it looks like you are trying to build several tables within one function, so it's hard to get what's going on. I'd suggest to build separate table independently where it's possible. i.e. build independent tables first and only then build dependent tables passing to it pointers to previously build table if necessary. > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) > + /* Initialize read ack register */ > + build_append_int_noprefix((void *)hardware_error, 1, 8); > + > + /* Reserved the total size for ERRORS fw_cfg blob > + */ > + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); > + > + /* Allocate guest memory for the Data fw_cfg blob */ > + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, > + 1, false); > + /* Reserve table header size */ > + acpi_data_push(table_data, sizeof(AcpiTableHeader)); > + > + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); GHES_ACPI_HEST_NOTIFY_RESERVED - name doesn't actually tell what it is I'd suggest to use spec field name wit table prefix, ex: ACPI_HEST_ERROR_SOURCE_COUNT also, beside build_append_int_noprefix() you need to at least add comment that exactly matches field from spec. the same applies to other fields you are adding in this patch > + > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { > + build_append_int_noprefix(table_data, > + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ > + /* source id */ > + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); > + /* related source id */ > + build_append_int_noprefix(table_data, 0xffff, 2); > + build_append_int_noprefix(table_data, 0, 1); /* flags */ > + > + /* Currently only enable SEA notification type to avoid the kernel > + * warning, reserve the space for other notification error source > + */ > + if (i == ACPI_HEST_NOTIFY_SEA) { > + build_append_int_noprefix(table_data, 1, 1); /* enabled */ > + } else { > + build_append_int_noprefix(table_data, 0, 1); /* enabled */ > + } > + > + /* The number of error status block per generic hardware error source */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max sections per record */ > + build_append_int_noprefix(table_data, 1, 4); > + /* Max raw data length */ > + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); > + > + /* Build error status address*/ > + build_address(table_data, linker, error_status_address_offset + i * > + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, > + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); just do something like this instead of build_address(): build_append_gas() bios_linker_loader_add_pointer() also register width 0x40 looks suspicious, where does it come from? While at it do you have a real hardware which has HEST table that you re trying to model after? I'd like to see HEST and other related tables from it. > + > + /* Hardware error notification structure */ > + build_append_int_noprefix(table_data, i, 1); /* type */ > + /* length */ > + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); > + build_append_int_noprefix(table_data, 0, 26); > + > + /* Error Status Block Length */ > + build_append_int_noprefix(table_data, > + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); > + > + /* Build read ack register */ > + build_address(table_data, linker, read_ack_register_offset + i * > + sizeof(AcpiGenericHardwareErrorSourceV2), > + offsetof(struct hardware_errors_buffer, ack_value) + > + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0, > + 4 /* QWord access */); > + > + /* Read ack preserve */ > + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); > + > + /* Read ack write */ > + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); > + } > + > + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) > + /* Patch address of generic error status block into > + * the address register so OSPM can retrieve and read it. > + */ > + bios_linker_loader_add_pointer(linker, > + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size, > + GHES_ERRORS_FW_CFG_FILE, > + offsetof(struct hardware_errors_buffer, gesb) + > + i * GHES_MAX_RAW_DATA_LENGTH); > + > + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob > + * so QEMU can write the ERRORS there. The address is expected to be > + * < 4GB, but write 64 bits anyway. > + */ > + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE, > + 0, address_size, GHES_ERRORS_FW_CFG_FILE, > + offsetof(struct hardware_errors_buffer, gesb)); > + > + build_header(linker, table_data, > + (void *)(table_data->data + ghes_start), "HEST", > + table_data->len - ghes_start, 1, NULL, "GHES"); > +} > + > +static GhesState ges; > +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error) > +{ > + > + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH; > + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size; > + > + /* Create a read-only fw_cfg file for GHES */ > + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data, > + size); > + /* Create a read-write fw_cfg file for Address */ > + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, > + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false); > +} > + > +bool ghes_update_guest(uint32_t notify, uint64_t physical_address) > +{ > + uint64_t error_block_addr; > + uint64_t ack_value_addr, ack_value = 0; > + int loop = 0, ack_value_size; > + bool ret = GHES_CPER_FAIL; > + > + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) - > + offsetof(struct hardware_errors_buffer, ack_value)) / > + GHES_ACPI_HEST_NOTIFY_RESERVED; > + > + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) { > + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH; > + error_block_addr = le32_to_cpu(error_block_addr); > + > + ack_value_addr = ges.ghes_addr_le - > + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size; > +retry: > + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size); > + if (!ack_value) { > + if (loop < 3) { > + usleep(100 * 1000); > + loop++; > + goto retry; > + } else { > + error_report("Last time OSPM does not acknowledge the error," > + " record CPER failed this time, set the ack value to" > + " avoid blocking next time CPER record! exit"); > + ack_value = 1; > + cpu_physical_memory_write(ack_value_addr, > + &ack_value, ack_value_size); > + return ret; > + } > + } else { > + /* A zero value in ghes_addr means that BIOS has not yet written > + * the address > + */ > + if (error_block_addr) { > + ack_value = 0; > + cpu_physical_memory_write(ack_value_addr, > + &ack_value, ack_value_size); > + ret = ghes_record_cper(error_block_addr, physical_address); > + } > + } > + } > + return ret; > +} > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 3d78ff6..def1ec1 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -45,6 +45,7 @@ > #include "hw/arm/virt.h" > #include "sysemu/numa.h" > #include "kvm_arm.h" > +#include "hw/acpi/hest_ghes.h" > > #define ARM_SPI_BASE 32 > #define ACPI_POWER_BUTTON_DEVICE "PWRB" > @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) > acpi_add_table(table_offsets, tables_blob); > build_spcr(tables_blob, tables->linker, vms); > > + acpi_add_table(table_offsets, tables_blob); > + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); > + > if (nb_numa_nodes > 0) { > acpi_add_table(table_offsets, tables_blob); > build_srat(tables_blob, tables->linker, vms); > @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms) > fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data, > acpi_data_len(tables.tcpalog)); > > + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors); > + > build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, > ACPI_BUILD_RSDP_FILE, 0); > > diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h > index 88d0738..7f7b55c 100644 > --- a/include/hw/acpi/aml-build.h > +++ b/include/hw/acpi/aml-build.h > @@ -211,6 +211,7 @@ struct AcpiBuildTables { > GArray *rsdp; > GArray *tcpalog; > GArray *vmgenid; > + GArray *hardware_errors; > BIOSLinker *linker; > } AcpiBuildTables; > > diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h > new file mode 100644 > index 0000000..0772756 > --- /dev/null > +++ b/include/hw/acpi/hest_ghes.h > @@ -0,0 +1,47 @@ > +/* > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Authors: > + * Dongjiu Geng <gengdongjiu@huawei.com> > + * > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, see <http://www.gnu.org/licenses/>. > + */ > + > +#ifndef ACPI_GHES_H > +#define ACPI_GHES_H > + > +#include "hw/acpi/bios-linker-loader.h" > + > +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" > +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" > + > +#define GHES_GAS_ADDRESS_OFFSET 4 > +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20 > +#define GHES_NOTIFICATION_STRUCTURE 32 > + > +#define GHES_CPER_OK 1 > +#define GHES_CPER_FAIL 0 > + > +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11 > +/* The max size in Bytes for one error block */ > +#define GHES_MAX_RAW_DATA_LENGTH 0x1000 > + > + > +typedef struct GhesState { > + uint64_t ghes_addr_le; > +} GhesState; > + > +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, > + BIOSLinker *linker); > +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors); > +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr); > +#endif -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Igor, Thank you very much for your review and comments, I will check your comments in detail and reply to you. On 2017/8/29 18:20, Igor Mammedov wrote: > On Fri, 18 Aug 2017 22:23:43 +0800 > Dongjiu Geng <gengdongjiu@huawei.com> wrote: > >> This implements APEI GHES Table by passing the error CPER info >> to the guest via a fw_cfg_blob. After a CPER info is recorded, an >> SEA(Synchronous External Abort)/SEI(SError Interrupt) exception >> will be injected into the guest OS. > > it's a bit complex patch/functionality so I've just mosty skimmed and > commented only on structure of the patch and changes I'd like to see > so it would be more structured and review-able. > > I'd suggest to add doc patch first which will describe how it's > supposed to work between QEMU/firmware/guest OS with expected > flows. > >> Below is the table layout, the max number of error soure is 11, >> which is classified by notification type. >> >> etc/acpi/tables etc/hardware_errors >> ==================== ========================================== >> + +--------------------------+ +------------------+ >> | | HEST | | address | +--------------+ >> | +--------------------------+ | registers | | Error Status | >> | | GHES0 | | +----------------+ | Data Block 0 | >> | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ >> | | ................. | | | +----------------+ | | CPER | >> | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | >> | | ................. | | | +----------------+ | | | .... | >> | | read_ack_register--------+-+ | | ............. | | | | CPER | >> | | read_ack_preserve | | | +------------------+ | | +-+------------+ >> | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | >> + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | >> | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ >> + +--------------------------+ | | | +----------------+ | | | CPER | >> | | ................. | | | +--->| | ack_value1 | | | | CPER | >> | | error_status_address-----+---+ | | | +----------------+ | | | .... | >> | | ................. | | | | | ............. | | | | CPER | >> | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ >> | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | >> | | read_ack_write | | | | +----------------+ | | +------------+ >> + +--------------------------| | | | | Error Status | >> | | ............... | | | | | Data Block 10| >> + +--------------------------+ | | +---->| +------------+ >> | | GHES10 | | | | | CPER | >> + +--------------------------+ | | | | CPER | >> | | ................. | | | | | .... | >> | | error_status_address-----+-----+ | | | CPER | >> | | ................. | | +-+------------+ >> | | read_ack_register--------+---------+ >> | | read_ack_preserve | >> | | read_ack_write | >> + +--------------------------+ > these diagram shows relations between tables which not necessarily bad > but as layout it's useless. > * Probably there is not much sense to have HEST table here, it's described > well enough in spec. You might just put reference here. > * these diagrams should go into doc/spec patch > * when you describe layout you need to show what and at what offsets > in which order in which blob/file is located. See ACPI spec for example > and/or docs/specs/acpi_nvdimm.txt docs/specs/acpi_mem_hotplug.txt for inspiration. > >> For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. >> so user space must check the ack value to avoid read-write race condition. >> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> >> --- >> hw/acpi/aml-build.c | 2 + >> hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++ >> hw/arm/virt-acpi-build.c | 6 + >> include/hw/acpi/aml-build.h | 1 + >> include/hw/acpi/hest_ghes.h | 47 ++++++ >> 5 files changed, 401 insertions(+) >> create mode 100644 hw/acpi/hest_ghes.c >> create mode 100644 include/hw/acpi/hest_ghes.h >> >> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c >> index 36a6cc4..6849e5f 100644 >> --- a/hw/acpi/aml-build.c >> +++ b/hw/acpi/aml-build.c >> @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables) >> tables->table_data = g_array_new(false, true /* clear */, 1); >> tables->tcpalog = g_array_new(false, true /* clear */, 1); >> tables->vmgenid = g_array_new(false, true /* clear */, 1); >> + tables->hardware_errors = g_array_new(false, true /* clear */, 1); >> tables->linker = bios_linker_loader_init(); >> } >> >> @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre) >> g_array_free(tables->table_data, true); >> g_array_free(tables->tcpalog, mfre); >> g_array_free(tables->vmgenid, mfre); >> + g_array_free(tables->hardware_errors, mfre); >> } >> >> /* Build rsdt table */ >> diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c >> new file mode 100644 >> index 0000000..ff6b5ef >> --- /dev/null >> +++ b/hw/acpi/hest_ghes.c >> @@ -0,0 +1,345 @@ >> +/* >> + * APEI GHES table Generation >> + * >> + * Copyright (C) 2017 huawei. >> + * >> + * Author: Dongjiu Geng <gengdongjiu@huawei.com> >> + * >> + * This work is licensed under the terms of the GNU GPL, version 2 or later. >> + * See the COPYING file in the top-level directory. >> + * >> + */ >> + >> +#include "qemu/osdep.h" >> +#include "qmp-commands.h" >> +#include "hw/acpi/acpi.h" >> +#include "hw/acpi/aml-build.h" >> +#include "hw/acpi/hest_ghes.h" >> +#include "hw/nvram/fw_cfg.h" >> +#include "sysemu/sysemu.h" >> +#include "qemu/error-report.h" >> + >> +/* The structure that stands for the layout >> + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob >> + * >> + * etc/hardware_errors >> + * ========================================== >> + * +------------------+ >> + * | address | +--------------+ >> + * | registers | | Error Status | >> + * | +----------------+ | Data Block 0 | >> + * | |status_address0 |------------->| +------------+ >> + * | +----------------+ | | CPER | >> + * | |status_address1 |----------+ | | CPER | >> + * | +----------------+ | | | .... | >> + * | |............. | | | | CPER | >> + * | +----------------+ | | +------------+ >> + * | |status_address10|-----+ | | Error Status | >> + * | +----------------+ | | | Data Block 1 | >> + * | |ack_value0 | | +-->| +------------+ >> + * | +----------------+ | | | CPER | >> + * | |ack_value1 | | | | CPER | >> + * | +----------------+ | | | .... | >> + * | | ............. | | | | CPER | >> + * | +----------------+ | +-+------------+ >> + * | |ack_value10 | | | |.......... | >> + * | +----------------+ | | +------------+ >> + * | | Error Status | >> + * | | Data Block10 | >> + * +------->+------------+ >> + * | | CPER | >> + * | | CPER | >> + * | | .... | >> + * | | CPER | >> + * +-+------------+ >> + */ >> +struct hardware_errors_buffer { >> + /* Generic Error Status Block register */ >> + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED]; >> + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED]; >> + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED]; >> +}; >> + >> +static int ghes_record_cper(uint64_t error_block_address, >> + uint64_t error_physical_addr) >> +{ >> + AcpiGenericErrorStatus block; >> + AcpiGenericErrorData *gdata; >> + UefiCperSecMemErr *mem_err; >> + uint64_t current_block_length; >> + unsigned char *buffer; >> + /* memory section */ >> + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE, >> + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, >> + 0x83, 0xB1}; >> + >> + cpu_physical_memory_read(error_block_address, &block, >> + sizeof(AcpiGenericErrorStatus)); >> + >> + /* Get the current generic error status block length */ >> + current_block_length = sizeof(AcpiGenericErrorStatus) + >> + le32_to_cpu(block.data_length); >> + >> + /* If the Generic Error Status Block is NULL, update >> + * the block header >> + */ >> + if (!block.block_status) { >> + block.block_status = ACPI_GEBS_UNCORRECTABLE; >> + block.error_severity = ACPI_CPER_SEV_RECOVERABLE; >> + } >> + >> + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData)); >> + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr)); >> + >> + /* check whether it runs out of the preallocated memory */ >> + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) > >> + GHES_MAX_RAW_DATA_LENGTH) { >> + error_report("Record CPER out of boundary!!!"); >> + return GHES_CPER_FAIL; >> + } >> + >> + /* Write back the Generic Error Status Block to guest memory */ >> + cpu_physical_memory_write(error_block_address, &block, >> + sizeof(AcpiGenericErrorStatus)); >> + >> + /* Fill in Generic Error Data Entry */ >> + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + >> + sizeof(UefiCperSecMemErr)); >> + >> + >> + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); > looks redundant, g_malloc0 does it for you > >> + gdata = (AcpiGenericErrorData *)buffer; >> + >> + /* Memory section */ >> + memcpy(&(gdata->section_type_le), &mem_section_id_le, >> + sizeof(mem_section_id_le)); >> + >> + /* error severity is recoverable */ >> + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; >> + gdata->revision = 0x300; /* the revision number is 0x300 */ >> + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); >> + >> + mem_err = (UefiCperSecMemErr *) (gdata + 1); >> + >> + /* User space only handle the memory section CPER */ >> + >> + /* Hard code to Multi-bit ECC error */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); >> + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); >> + >> + /* Record the physical address at which the memory error occurred */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); >> + mem_err->physical_addr = cpu_to_le32(error_physical_addr); > > I'd prefer for you to use build_append_int_noprefix() API to compose > whole error status block > > and try to get rid of most structures you introduce in patch 1/6, > as they will be left unused after that. > >> + >> + /* Write back the Generic Error Data Entry to guest memory */ >> + cpu_physical_memory_write(error_block_address + current_block_length, >> + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); >> + >> + g_free(buffer); >> + return GHES_CPER_OK; >> +} >> + >> +static void >> +build_address(GArray *table_data, BIOSLinker *linker, >> + uint32_t dst_patched_offset, uint32_t src_offset, >> + uint8_t address_space_id , uint8_t register_bit_width, >> + uint8_t register_bit_offset, uint8_t access_size) >> +{ >> + uint32_t address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); >> + >> + /* Address space */ >> + build_append_int_noprefix(table_data, address_space_id, 1); >> + /* register bit width */ >> + build_append_int_noprefix(table_data, register_bit_width, 1); >> + /* register bit offset */ >> + build_append_int_noprefix(table_data, register_bit_offset, 1); >> + /* access size */ >> + build_append_int_noprefix(table_data, access_size, 1); >> + acpi_data_push(table_data, address_size); >> + >> + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM >> + * can retrieve and read it. the address size is 64 bits. >> + */ >> + bios_linker_loader_add_pointer(linker, >> + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), >> + GHES_ERRORS_FW_CFG_FILE, src_offset); >> +} > It's mostly generic GAS structure with linker addition. > I'd suggest to reuse something like > https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c > to build GAS and use bios_linker_loader_add_pointer() directly in ghes_build_acpi(). > >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker) >> +{ >> + uint32_t ghes_start = table_data->len; >> + uint32_t address_size, error_status_address_offset; >> + uint32_t read_ack_register_offset, i; >> + >> + address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); > it's confusing name for var, > AcpiGenericAddress::address is fixed unsigned 64 bit integer per spec > also, I'm not sure why it's needed at all. > >> + >> + error_status_address_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + >> + offsetof(struct AcpiGenericAddress, address); >> + >> + read_ack_register_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + >> + offsetof(struct AcpiGenericAddress, address); > it's really hard to get why you use offsetof() so much in this function, > to me above code totally unreadable. > >> + acpi_data_push(hardware_error, >> + offsetof(struct hardware_errors_buffer, ack_value)); > it looks like you are trying to build several tables within one function, > so it's hard to get what's going on. > I'd suggest to build separate table independently where it's possible. > > i.e. build independent tables first > and only then build dependent tables passing to it pointers > to previously build table if necessary. > >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) >> + /* Initialize read ack register */ >> + build_append_int_noprefix((void *)hardware_error, 1, 8); >> + >> + /* Reserved the total size for ERRORS fw_cfg blob >> + */ >> + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); >> + >> + /* Allocate guest memory for the Data fw_cfg blob */ >> + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, >> + 1, false); >> + /* Reserve table header size */ >> + acpi_data_push(table_data, sizeof(AcpiTableHeader)); >> + >> + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); > GHES_ACPI_HEST_NOTIFY_RESERVED - name doesn't actually tell what it is > I'd suggest to use spec field name wit table prefix, ex: > ACPI_HEST_ERROR_SOURCE_COUNT > > also, beside build_append_int_noprefix() you need to at least > add comment that exactly matches field from spec. > > the same applies to other fields you are adding in this patch > >> + >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { >> + build_append_int_noprefix(table_data, >> + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ >> + /* source id */ >> + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); >> + /* related source id */ >> + build_append_int_noprefix(table_data, 0xffff, 2); >> + build_append_int_noprefix(table_data, 0, 1); /* flags */ >> + >> + /* Currently only enable SEA notification type to avoid the kernel >> + * warning, reserve the space for other notification error source >> + */ >> + if (i == ACPI_HEST_NOTIFY_SEA) { >> + build_append_int_noprefix(table_data, 1, 1); /* enabled */ >> + } else { >> + build_append_int_noprefix(table_data, 0, 1); /* enabled */ >> + } >> + >> + /* The number of error status block per generic hardware error source */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max sections per record */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max raw data length */ >> + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + /* Build error status address*/ >> + build_address(table_data, linker, error_status_address_offset + i * >> + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, >> + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); > just do something like this instead of build_address(): > build_append_gas() > bios_linker_loader_add_pointer() > > also register width 0x40 looks suspicious, where does it come from? > While at it do you have a real hardware which has HEST table that you re trying to model after? > I'd like to see HEST and other related tables from it. > >> + >> + /* Hardware error notification structure */ >> + build_append_int_noprefix(table_data, i, 1); /* type */ >> + /* length */ >> + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); >> + build_append_int_noprefix(table_data, 0, 26); >> + >> + /* Error Status Block Length */ >> + build_append_int_noprefix(table_data, >> + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); >> + >> + /* Build read ack register */ >> + build_address(table_data, linker, read_ack_register_offset + i * >> + sizeof(AcpiGenericHardwareErrorSourceV2), >> + offsetof(struct hardware_errors_buffer, ack_value) + >> + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0, >> + 4 /* QWord access */); >> + >> + /* Read ack preserve */ >> + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); >> + >> + /* Read ack write */ >> + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); >> + } >> + >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) >> + /* Patch address of generic error status block into >> + * the address register so OSPM can retrieve and read it. >> + */ >> + bios_linker_loader_add_pointer(linker, >> + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size, >> + GHES_ERRORS_FW_CFG_FILE, >> + offsetof(struct hardware_errors_buffer, gesb) + >> + i * GHES_MAX_RAW_DATA_LENGTH); >> + >> + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob >> + * so QEMU can write the ERRORS there. The address is expected to be >> + * < 4GB, but write 64 bits anyway. >> + */ >> + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE, >> + 0, address_size, GHES_ERRORS_FW_CFG_FILE, >> + offsetof(struct hardware_errors_buffer, gesb)); >> + >> + build_header(linker, table_data, >> + (void *)(table_data->data + ghes_start), "HEST", >> + table_data->len - ghes_start, 1, NULL, "GHES"); >> +} >> + >> +static GhesState ges; >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error) >> +{ >> + >> + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH; >> + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size; >> + >> + /* Create a read-only fw_cfg file for GHES */ >> + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data, >> + size); >> + /* Create a read-write fw_cfg file for Address */ >> + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, >> + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false); >> +} >> + >> +bool ghes_update_guest(uint32_t notify, uint64_t physical_address) >> +{ >> + uint64_t error_block_addr; >> + uint64_t ack_value_addr, ack_value = 0; >> + int loop = 0, ack_value_size; >> + bool ret = GHES_CPER_FAIL; >> + >> + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) - >> + offsetof(struct hardware_errors_buffer, ack_value)) / >> + GHES_ACPI_HEST_NOTIFY_RESERVED; >> + >> + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) { >> + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH; >> + error_block_addr = le32_to_cpu(error_block_addr); >> + >> + ack_value_addr = ges.ghes_addr_le - >> + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size; >> +retry: >> + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size); >> + if (!ack_value) { >> + if (loop < 3) { >> + usleep(100 * 1000); >> + loop++; >> + goto retry; >> + } else { >> + error_report("Last time OSPM does not acknowledge the error," >> + " record CPER failed this time, set the ack value to" >> + " avoid blocking next time CPER record! exit"); >> + ack_value = 1; >> + cpu_physical_memory_write(ack_value_addr, >> + &ack_value, ack_value_size); >> + return ret; >> + } >> + } else { >> + /* A zero value in ghes_addr means that BIOS has not yet written >> + * the address >> + */ >> + if (error_block_addr) { >> + ack_value = 0; >> + cpu_physical_memory_write(ack_value_addr, >> + &ack_value, ack_value_size); >> + ret = ghes_record_cper(error_block_addr, physical_address); >> + } >> + } >> + } >> + return ret; >> +} >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c >> index 3d78ff6..def1ec1 100644 >> --- a/hw/arm/virt-acpi-build.c >> +++ b/hw/arm/virt-acpi-build.c >> @@ -45,6 +45,7 @@ >> #include "hw/arm/virt.h" >> #include "sysemu/numa.h" >> #include "kvm_arm.h" >> +#include "hw/acpi/hest_ghes.h" >> >> #define ARM_SPI_BASE 32 >> #define ACPI_POWER_BUTTON_DEVICE "PWRB" >> @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) >> acpi_add_table(table_offsets, tables_blob); >> build_spcr(tables_blob, tables->linker, vms); >> >> + acpi_add_table(table_offsets, tables_blob); >> + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); >> + >> if (nb_numa_nodes > 0) { >> acpi_add_table(table_offsets, tables_blob); >> build_srat(tables_blob, tables->linker, vms); >> @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms) >> fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data, >> acpi_data_len(tables.tcpalog)); >> >> + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors); >> + >> build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, >> ACPI_BUILD_RSDP_FILE, 0); >> >> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h >> index 88d0738..7f7b55c 100644 >> --- a/include/hw/acpi/aml-build.h >> +++ b/include/hw/acpi/aml-build.h >> @@ -211,6 +211,7 @@ struct AcpiBuildTables { >> GArray *rsdp; >> GArray *tcpalog; >> GArray *vmgenid; >> + GArray *hardware_errors; >> BIOSLinker *linker; >> } AcpiBuildTables; >> >> diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h >> new file mode 100644 >> index 0000000..0772756 >> --- /dev/null >> +++ b/include/hw/acpi/hest_ghes.h >> @@ -0,0 +1,47 @@ >> +/* >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Authors: >> + * Dongjiu Geng <gengdongjiu@huawei.com> >> + * >> + * You should have received a copy of the GNU General Public License along >> + * with this program; if not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#ifndef ACPI_GHES_H >> +#define ACPI_GHES_H >> + >> +#include "hw/acpi/bios-linker-loader.h" >> + >> +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" >> +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" >> + >> +#define GHES_GAS_ADDRESS_OFFSET 4 >> +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20 >> +#define GHES_NOTIFICATION_STRUCTURE 32 >> + >> +#define GHES_CPER_OK 1 >> +#define GHES_CPER_FAIL 0 >> + >> +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11 >> +/* The max size in Bytes for one error block */ >> +#define GHES_MAX_RAW_DATA_LENGTH 0x1000 >> + >> + >> +typedef struct GhesState { >> + uint64_t ghes_addr_le; >> +} GhesState; >> + >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker); >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors); >> +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr); >> +#endif > > > . > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Igor, On 2017/8/29 18:20, Igor Mammedov wrote: > On Fri, 18 Aug 2017 22:23:43 +0800 > Dongjiu Geng <gengdongjiu@huawei.com> wrote: > >> This implements APEI GHES Table by passing the error CPER info >> to the guest via a fw_cfg_blob. After a CPER info is recorded, an >> SEA(Synchronous External Abort)/SEI(SError Interrupt) exception >> will be injected into the guest OS. > > it's a bit complex patch/functionality so I've just mosty skimmed and > commented only on structure of the patch and changes I'd like to see > so it would be more structured and review-able. I will make it more structured and review-able, so that it is easily readable. > > I'd suggest to add doc patch first which will describe how it's > supposed to work between QEMU/firmware/guest OS with expected > flows. It is sure, I will add a doc patch. > >> Below is the table layout, the max number of error soure is 11, >> which is classified by notification type. >> >> etc/acpi/tables etc/hardware_errors >> ==================== ========================================== >> + +--------------------------+ +------------------+ >> | | HEST | | address | +--------------+ >> | +--------------------------+ | registers | | Error Status | >> | | GHES0 | | +----------------+ | Data Block 0 | >> | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ >> | | ................. | | | +----------------+ | | CPER | >> | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | >> | | ................. | | | +----------------+ | | | .... | >> | | read_ack_register--------+-+ | | ............. | | | | CPER | >> | | read_ack_preserve | | | +------------------+ | | +-+------------+ >> | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | >> + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | >> | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ >> + +--------------------------+ | | | +----------------+ | | | CPER | >> | | ................. | | | +--->| | ack_value1 | | | | CPER | >> | | error_status_address-----+---+ | | | +----------------+ | | | .... | >> | | ................. | | | | | ............. | | | | CPER | >> | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ >> | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | >> | | read_ack_write | | | | +----------------+ | | +------------+ >> + +--------------------------| | | | | Error Status | >> | | ............... | | | | | Data Block 10| >> + +--------------------------+ | | +---->| +------------+ >> | | GHES10 | | | | | CPER | >> + +--------------------------+ | | | | CPER | >> | | ................. | | | | | .... | >> | | error_status_address-----+-----+ | | | CPER | >> | | ................. | | +-+------------+ >> | | read_ack_register--------+---------+ >> | | read_ack_preserve | >> | | read_ack_write | >> + +--------------------------+ > these diagram shows relations between tables which not necessarily bad > but as layout it's useless. Maybe not yet. it shows how the table is generated and how the CPER is recorded through fw_cfg blob between Qemu and guest firmware. for example: etc/acpi/tables and etc/hardware_errors anyway I will move it to the spec/doc. > * Probably there is not much sense to have HEST table here, it's described > well enough in spec. You might just put reference here. > * these diagrams should go into doc/spec patch I will move these diagrams to doc/spec patch > * when you describe layout you need to show what and at what offsets > in which order in which blob/file is located. See ACPI spec for example > and/or docs/specs/acpi_nvdimm.txt docs/specs/acpi_mem_hotplug.txt for inspiration. Ok, thanks for the suggestion. > >> For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. >> so user space must check the ack value to avoid read-write race condition. >> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> >> --- cut---- >> + /* Write back the Generic Error Status Block to guest memory */ >> + cpu_physical_memory_write(error_block_address, &block, >> + sizeof(AcpiGenericErrorStatus)); >> + >> + /* Fill in Generic Error Data Entry */ >> + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + >> + sizeof(UefiCperSecMemErr)); >> + >> + >> + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); > looks redundant, g_malloc0 does it for you I will remove it. > >> + gdata = (AcpiGenericErrorData *)buffer; >> + >> + /* Memory section */ >> + memcpy(&(gdata->section_type_le), &mem_section_id_le, >> + sizeof(mem_section_id_le)); >> + >> + /* error severity is recoverable */ >> + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; >> + gdata->revision = 0x300; /* the revision number is 0x300 */ >> + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); >> + >> + mem_err = (UefiCperSecMemErr *) (gdata + 1); >> + >> + /* User space only handle the memory section CPER */ >> + >> + /* Hard code to Multi-bit ECC error */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); >> + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); >> + >> + /* Record the physical address at which the memory error occurred */ >> + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); >> + mem_err->physical_addr = cpu_to_le32(error_physical_addr); > > I'd prefer for you to use build_append_int_noprefix() API to compose > whole error status block I will use build_append_int_noprefix() API to compose the block status > > and try to get rid of most structures you introduce in patch 1/6, > as they will be left unused after that. I will clear the structures and remove the unused structures that this patch does not used. > >> + >> + /* Write back the Generic Error Data Entry to guest memory */ >> + cpu_physical_memory_write(error_block_address + current_block_length, >> + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); >> + >> + g_free(buffer); >> + return GHES_CPER_OK; >> +} >> + >> +static void >> +build_address(GArray *table_data, BIOSLinker *linker, >> + uint32_t dst_patched_offset, uint32_t src_offset, >> + uint8_t address_space_id , uint8_t register_bit_width, >> + uint8_t register_bit_offset, uint8_t access_size) >> +{ >> + uint32_t address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); >> + >> + /* Address space */ >> + build_append_int_noprefix(table_data, address_space_id, 1); >> + /* register bit width */ >> + build_append_int_noprefix(table_data, register_bit_width, 1); >> + /* register bit offset */ >> + build_append_int_noprefix(table_data, register_bit_offset, 1); >> + /* access size */ >> + build_append_int_noprefix(table_data, access_size, 1); >> + acpi_data_push(table_data, address_size); >> + >> + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM >> + * can retrieve and read it. the address size is 64 bits. >> + */ >> + bios_linker_loader_add_pointer(linker, >> + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), >> + GHES_ERRORS_FW_CFG_FILE, src_offset); >> +} > It's mostly generic GAS structure with linker addition. > I'd suggest to reuse something like > https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c > to build GAS and use bios_linker_loader_add_pointer() directly in ghes_build_acpi(). thanks, OK. > >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, >> + BIOSLinker *linker) >> +{ >> + uint32_t ghes_start = table_data->len; >> + uint32_t address_size, error_status_address_offset; >> + uint32_t read_ack_register_offset, i; >> + >> + address_size = sizeof(struct AcpiGenericAddress) - >> + offsetof(struct AcpiGenericAddress, address); > it's confusing name for var, > AcpiGenericAddress::address is fixed unsigned 64 bit integer per spec > also, I'm not sure why it's needed at all. it is because other people have concern about where does the "unsigned 64 bit integer" come from, they are confused about the "unsigned 64 bit integer" so they suggested use sizeof. anyway I will directly use unsigned 64 bit integer. > >> + >> + error_status_address_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + >> + offsetof(struct AcpiGenericAddress, address); >> + >> + read_ack_register_offset = ghes_start + >> + sizeof(AcpiHardwareErrorSourceTable) + >> + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + >> + offsetof(struct AcpiGenericAddress, address); > it's really hard to get why you use offsetof() so much in this function, > to me above code totally unreadable. I will find method to make it easily readable. > >> + acpi_data_push(hardware_error, >> + offsetof(struct hardware_errors_buffer, ack_value)); > it looks like you are trying to build several tables within one function, > so it's hard to get what's going on. > I'd suggest to build separate table independently where it's possible. > > i.e. build independent tables first > and only then build dependent tables passing to it pointers > to previously build table if necessary. thanks for the suggestion, I will make the table independently as far as possible > >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) >> + /* Initialize read ack register */ >> + build_append_int_noprefix((void *)hardware_error, 1, 8); >> + >> + /* Reserved the total size for ERRORS fw_cfg blob >> + */ >> + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); >> + >> + /* Allocate guest memory for the Data fw_cfg blob */ >> + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, >> + 1, false); >> + /* Reserve table header size */ >> + acpi_data_push(table_data, sizeof(AcpiTableHeader)); >> + >> + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); > GHES_ACPI_HEST_NOTIFY_RESERVED - name doesn't actually tell what it is > I'd suggest to use spec field name wit table prefix, ex: > ACPI_HEST_ERROR_SOURCE_COUNT thanks for the suggestion, I will use your suggested name. > > also, beside build_append_int_noprefix() you need to at least > add comment that exactly matches field from spec. > > the same applies to other fields you are adding in this patch OK, will add it. > >> + >> + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { >> + build_append_int_noprefix(table_data, >> + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ >> + /* source id */ >> + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); >> + /* related source id */ >> + build_append_int_noprefix(table_data, 0xffff, 2); >> + build_append_int_noprefix(table_data, 0, 1); /* flags */ >> + >> + /* Currently only enable SEA notification type to avoid the kernel >> + * warning, reserve the space for other notification error source >> + */ >> + if (i == ACPI_HEST_NOTIFY_SEA) { >> + build_append_int_noprefix(table_data, 1, 1); /* enabled */ >> + } else { >> + build_append_int_noprefix(table_data, 0, 1); /* enabled */ >> + } >> + >> + /* The number of error status block per generic hardware error source */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max sections per record */ >> + build_append_int_noprefix(table_data, 1, 4); >> + /* Max raw data length */ >> + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); >> + >> + /* Build error status address*/ >> + build_address(table_data, linker, error_status_address_offset + i * >> + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, >> + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); > just do something like this instead of build_address(): > build_append_gas() > bios_linker_loader_add_pointer() Thanks for the suggestion. > > also register width 0x40 looks suspicious, where does it come from? > While at it do you have a real hardware which has HEST table that you re trying to model after? > I'd like to see HEST and other related tables from it. Igor, what is your suspicious point? The register width 0x40 come from our host BIOS record to the System Memory space. For the SEA/SEI, the Qemu(user space) only handle the memory section hardware error, not include processor error. so it may not involve other Address Space, such as System I/O space it is sure we have hardware. I share our BIOS code that generate HEST and other related table here. https://github.com/hisilicon/uefi.git Now we have also submitted the host BIOS code to open source for review, this code generated the HEST and other related table thanks. > >> + >> + /* Hardware error notification structure */ >> + build_append_int_noprefix(table_data, i, 1); /* type */ >> + /* length */ >> + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); >> + build_append_int_noprefix(table_data, 0, 26); >> + >> + /* Error Status Block Length */ >> + build_append_int_noprefix(table_data, >> + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); >> + cut ----- -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 1 Sep 2017 17:58:55 +0800 gengdongjiu <gengdongjiu@huawei.com> wrote: > Hi Igor, > > On 2017/8/29 18:20, Igor Mammedov wrote: > > On Fri, 18 Aug 2017 22:23:43 +0800 > > Dongjiu Geng <gengdongjiu@huawei.com> wrote: [...] > > > >> +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, > >> + BIOSLinker *linker) > >> +{ > >> + uint32_t ghes_start = table_data->len; > >> + uint32_t address_size, error_status_address_offset; > >> + uint32_t read_ack_register_offset, i; > >> + > >> + address_size = sizeof(struct AcpiGenericAddress) - > >> + offsetof(struct AcpiGenericAddress, address); > > it's confusing name for var, > > AcpiGenericAddress::address is fixed unsigned 64 bit integer per spec > > also, I'm not sure why it's needed at all. > it is because other people have concern about where does the "unsigned 64 bit integer" > come from, they are confused about the "unsigned 64 bit integer" > so they suggested use sizeof. anyway I will directly use unsigned 64 bit integer. Maybe properly named macro instead of sizeof(foo) would do the job [...] > >> + > >> + /* Build error status address*/ > >> + build_address(table_data, linker, error_status_address_offset + i * > >> + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, > >> + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); > > just do something like this instead of build_address(): > > build_append_gas() > > bios_linker_loader_add_pointer() > Thanks for the suggestion. > > > > > also register width 0x40 looks suspicious, where does it come from? > > While at it do you have a real hardware which has HEST table that you re trying to model after? > > I'd like to see HEST and other related tables from it. > > Igor, what is your suspicious point? The register width 0x40 come from our host BIOS record to the System Memory space. maybe s/0x40/ERROR_STATUS_BLOCK_POINTER_SIZE/ [...] -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index 36a6cc4..6849e5f 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables) tables->table_data = g_array_new(false, true /* clear */, 1); tables->tcpalog = g_array_new(false, true /* clear */, 1); tables->vmgenid = g_array_new(false, true /* clear */, 1); + tables->hardware_errors = g_array_new(false, true /* clear */, 1); tables->linker = bios_linker_loader_init(); } @@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre) g_array_free(tables->table_data, true); g_array_free(tables->tcpalog, mfre); g_array_free(tables->vmgenid, mfre); + g_array_free(tables->hardware_errors, mfre); } /* Build rsdt table */ diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c new file mode 100644 index 0000000..ff6b5ef --- /dev/null +++ b/hw/acpi/hest_ghes.c @@ -0,0 +1,345 @@ +/* + * APEI GHES table Generation + * + * Copyright (C) 2017 huawei. + * + * Author: Dongjiu Geng <gengdongjiu@huawei.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qmp-commands.h" +#include "hw/acpi/acpi.h" +#include "hw/acpi/aml-build.h" +#include "hw/acpi/hest_ghes.h" +#include "hw/nvram/fw_cfg.h" +#include "sysemu/sysemu.h" +#include "qemu/error-report.h" + +/* The structure that stands for the layout + * GHES_ERRORS_FW_CFG_FILE fw_cfg blob + * + * etc/hardware_errors + * ========================================== + * +------------------+ + * | address | +--------------+ + * | registers | | Error Status | + * | +----------------+ | Data Block 0 | + * | |status_address0 |------------->| +------------+ + * | +----------------+ | | CPER | + * | |status_address1 |----------+ | | CPER | + * | +----------------+ | | | .... | + * | |............. | | | | CPER | + * | +----------------+ | | +------------+ + * | |status_address10|-----+ | | Error Status | + * | +----------------+ | | | Data Block 1 | + * | |ack_value0 | | +-->| +------------+ + * | +----------------+ | | | CPER | + * | |ack_value1 | | | | CPER | + * | +----------------+ | | | .... | + * | | ............. | | | | CPER | + * | +----------------+ | +-+------------+ + * | |ack_value10 | | | |.......... | + * | +----------------+ | | +------------+ + * | | Error Status | + * | | Data Block10 | + * +------->+------------+ + * | | CPER | + * | | CPER | + * | | .... | + * | | CPER | + * +-+------------+ + */ +struct hardware_errors_buffer { + /* Generic Error Status Block register */ + uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED]; + uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED]; + char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED]; +}; + +static int ghes_record_cper(uint64_t error_block_address, + uint64_t error_physical_addr) +{ + AcpiGenericErrorStatus block; + AcpiGenericErrorData *gdata; + UefiCperSecMemErr *mem_err; + uint64_t current_block_length; + unsigned char *buffer; + /* memory section */ + char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE, + 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C, + 0x83, 0xB1}; + + cpu_physical_memory_read(error_block_address, &block, + sizeof(AcpiGenericErrorStatus)); + + /* Get the current generic error status block length */ + current_block_length = sizeof(AcpiGenericErrorStatus) + + le32_to_cpu(block.data_length); + + /* If the Generic Error Status Block is NULL, update + * the block header + */ + if (!block.block_status) { + block.block_status = ACPI_GEBS_UNCORRECTABLE; + block.error_severity = ACPI_CPER_SEV_RECOVERABLE; + } + + block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData)); + block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr)); + + /* check whether it runs out of the preallocated memory */ + if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) > + GHES_MAX_RAW_DATA_LENGTH) { + error_report("Record CPER out of boundary!!!"); + return GHES_CPER_FAIL; + } + + /* Write back the Generic Error Status Block to guest memory */ + cpu_physical_memory_write(error_block_address, &block, + sizeof(AcpiGenericErrorStatus)); + + /* Fill in Generic Error Data Entry */ + buffer = g_malloc0(sizeof(AcpiGenericErrorData) + + sizeof(UefiCperSecMemErr)); + + + memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); + gdata = (AcpiGenericErrorData *)buffer; + + /* Memory section */ + memcpy(&(gdata->section_type_le), &mem_section_id_le, + sizeof(mem_section_id_le)); + + /* error severity is recoverable */ + gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE; + gdata->revision = 0x300; /* the revision number is 0x300 */ + gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr)); + + mem_err = (UefiCperSecMemErr *) (gdata + 1); + + /* User space only handle the memory section CPER */ + + /* Hard code to Multi-bit ECC error */ + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE); + mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC); + + /* Record the physical address at which the memory error occurred */ + mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA); + mem_err->physical_addr = cpu_to_le32(error_physical_addr); + + /* Write back the Generic Error Data Entry to guest memory */ + cpu_physical_memory_write(error_block_address + current_block_length, + buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr)); + + g_free(buffer); + return GHES_CPER_OK; +} + +static void +build_address(GArray *table_data, BIOSLinker *linker, + uint32_t dst_patched_offset, uint32_t src_offset, + uint8_t address_space_id , uint8_t register_bit_width, + uint8_t register_bit_offset, uint8_t access_size) +{ + uint32_t address_size = sizeof(struct AcpiGenericAddress) - + offsetof(struct AcpiGenericAddress, address); + + /* Address space */ + build_append_int_noprefix(table_data, address_space_id, 1); + /* register bit width */ + build_append_int_noprefix(table_data, register_bit_width, 1); + /* register bit offset */ + build_append_int_noprefix(table_data, register_bit_offset, 1); + /* access size */ + build_append_int_noprefix(table_data, access_size, 1); + acpi_data_push(table_data, address_size); + + /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM + * can retrieve and read it. the address size is 64 bits. + */ + bios_linker_loader_add_pointer(linker, + ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t), + GHES_ERRORS_FW_CFG_FILE, src_offset); +} + +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, + BIOSLinker *linker) +{ + uint32_t ghes_start = table_data->len; + uint32_t address_size, error_status_address_offset; + uint32_t read_ack_register_offset, i; + + address_size = sizeof(struct AcpiGenericAddress) - + offsetof(struct AcpiGenericAddress, address); + + error_status_address_offset = ghes_start + + sizeof(AcpiHardwareErrorSourceTable) + + offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) + + offsetof(struct AcpiGenericAddress, address); + + read_ack_register_offset = ghes_start + + sizeof(AcpiHardwareErrorSourceTable) + + offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) + + offsetof(struct AcpiGenericAddress, address); + + acpi_data_push(hardware_error, + offsetof(struct hardware_errors_buffer, ack_value)); + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) + /* Initialize read ack register */ + build_append_int_noprefix((void *)hardware_error, 1, 8); + + /* Reserved the total size for ERRORS fw_cfg blob + */ + acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer)); + + /* Allocate guest memory for the Data fw_cfg blob */ + bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error, + 1, false); + /* Reserve table header size */ + acpi_data_push(table_data, sizeof(AcpiTableHeader)); + + build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4); + + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) { + build_append_int_noprefix(table_data, + ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */ + /* source id */ + build_append_int_noprefix(table_data, cpu_to_le16(i), 2); + /* related source id */ + build_append_int_noprefix(table_data, 0xffff, 2); + build_append_int_noprefix(table_data, 0, 1); /* flags */ + + /* Currently only enable SEA notification type to avoid the kernel + * warning, reserve the space for other notification error source + */ + if (i == ACPI_HEST_NOTIFY_SEA) { + build_append_int_noprefix(table_data, 1, 1); /* enabled */ + } else { + build_append_int_noprefix(table_data, 0, 1); /* enabled */ + } + + /* The number of error status block per generic hardware error source */ + build_append_int_noprefix(table_data, 1, 4); + /* Max sections per record */ + build_append_int_noprefix(table_data, 1, 4); + /* Max raw data length */ + build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4); + + /* Build error status address*/ + build_address(table_data, linker, error_status_address_offset + i * + sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size, + AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */); + + /* Hardware error notification structure */ + build_append_int_noprefix(table_data, i, 1); /* type */ + /* length */ + build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1); + build_append_int_noprefix(table_data, 0, 26); + + /* Error Status Block Length */ + build_append_int_noprefix(table_data, + cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4); + + /* Build read ack register */ + build_address(table_data, linker, read_ack_register_offset + i * + sizeof(AcpiGenericHardwareErrorSourceV2), + offsetof(struct hardware_errors_buffer, ack_value) + + i * address_size, AML_SYSTEM_MEMORY, 0x40, 0, + 4 /* QWord access */); + + /* Read ack preserve */ + build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); + + /* Read ack write */ + build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); + } + + for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) + /* Patch address of generic error status block into + * the address register so OSPM can retrieve and read it. + */ + bios_linker_loader_add_pointer(linker, + GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size, + GHES_ERRORS_FW_CFG_FILE, + offsetof(struct hardware_errors_buffer, gesb) + + i * GHES_MAX_RAW_DATA_LENGTH); + + /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob + * so QEMU can write the ERRORS there. The address is expected to be + * < 4GB, but write 64 bits anyway. + */ + bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE, + 0, address_size, GHES_ERRORS_FW_CFG_FILE, + offsetof(struct hardware_errors_buffer, gesb)); + + build_header(linker, table_data, + (void *)(table_data->data + ghes_start), "HEST", + table_data->len - ghes_start, 1, NULL, "GHES"); +} + +static GhesState ges; +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error) +{ + + size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH; + size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size; + + /* Create a read-only fw_cfg file for GHES */ + fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data, + size); + /* Create a read-write fw_cfg file for Address */ + fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, + &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false); +} + +bool ghes_update_guest(uint32_t notify, uint64_t physical_address) +{ + uint64_t error_block_addr; + uint64_t ack_value_addr, ack_value = 0; + int loop = 0, ack_value_size; + bool ret = GHES_CPER_FAIL; + + ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) - + offsetof(struct hardware_errors_buffer, ack_value)) / + GHES_ACPI_HEST_NOTIFY_RESERVED; + + if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) { + error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH; + error_block_addr = le32_to_cpu(error_block_addr); + + ack_value_addr = ges.ghes_addr_le - + (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size; +retry: + cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size); + if (!ack_value) { + if (loop < 3) { + usleep(100 * 1000); + loop++; + goto retry; + } else { + error_report("Last time OSPM does not acknowledge the error," + " record CPER failed this time, set the ack value to" + " avoid blocking next time CPER record! exit"); + ack_value = 1; + cpu_physical_memory_write(ack_value_addr, + &ack_value, ack_value_size); + return ret; + } + } else { + /* A zero value in ghes_addr means that BIOS has not yet written + * the address + */ + if (error_block_addr) { + ack_value = 0; + cpu_physical_memory_write(ack_value_addr, + &ack_value, ack_value_size); + ret = ghes_record_cper(error_block_addr, physical_address); + } + } + } + return ret; +} diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 3d78ff6..def1ec1 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -45,6 +45,7 @@ #include "hw/arm/virt.h" #include "sysemu/numa.h" #include "kvm_arm.h" +#include "hw/acpi/hest_ghes.h" #define ARM_SPI_BASE 32 #define ACPI_POWER_BUTTON_DEVICE "PWRB" @@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables) acpi_add_table(table_offsets, tables_blob); build_spcr(tables_blob, tables->linker, vms); + acpi_add_table(table_offsets, tables_blob); + ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker); + if (nb_numa_nodes > 0) { acpi_add_table(table_offsets, tables_blob); build_srat(tables_blob, tables->linker, vms); @@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms) fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data, acpi_data_len(tables.tcpalog)); + ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors); + build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp, ACPI_BUILD_RSDP_FILE, 0); diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h index 88d0738..7f7b55c 100644 --- a/include/hw/acpi/aml-build.h +++ b/include/hw/acpi/aml-build.h @@ -211,6 +211,7 @@ struct AcpiBuildTables { GArray *rsdp; GArray *tcpalog; GArray *vmgenid; + GArray *hardware_errors; BIOSLinker *linker; } AcpiBuildTables; diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h new file mode 100644 index 0000000..0772756 --- /dev/null +++ b/include/hw/acpi/hest_ghes.h @@ -0,0 +1,47 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Authors: + * Dongjiu Geng <gengdongjiu@huawei.com> + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef ACPI_GHES_H +#define ACPI_GHES_H + +#include "hw/acpi/bios-linker-loader.h" + +#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" +#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" + +#define GHES_GAS_ADDRESS_OFFSET 4 +#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20 +#define GHES_NOTIFICATION_STRUCTURE 32 + +#define GHES_CPER_OK 1 +#define GHES_CPER_FAIL 0 + +#define GHES_ACPI_HEST_NOTIFY_RESERVED 11 +/* The max size in Bytes for one error block */ +#define GHES_MAX_RAW_DATA_LENGTH 0x1000 + + +typedef struct GhesState { + uint64_t ghes_addr_le; +} GhesState; + +void ghes_build_acpi(GArray *table_data, GArray *hardware_error, + BIOSLinker *linker); +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors); +bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr); +#endif
This implements APEI GHES Table by passing the error CPER info to the guest via a fw_cfg_blob. After a CPER info is recorded, an SEA(Synchronous External Abort)/SEI(SError Interrupt) exception will be injected into the guest OS. Below is the table layout, the max number of error soure is 11, which is classified by notification type. etc/acpi/tables etc/hardware_errors ==================== ========================================== + +--------------------------+ +------------------+ | | HEST | | address | +--------------+ | +--------------------------+ | registers | | Error Status | | | GHES0 | | +----------------+ | Data Block 0 | | +--------------------------+ +--------->| |status_address0 |------------->| +------------+ | | ................. | | | +----------------+ | | CPER | | | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER | | | ................. | | | +----------------+ | | | .... | | | read_ack_register--------+-+ | | ............. | | | | CPER | | | read_ack_preserve | | | +------------------+ | | +-+------------+ | | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status | + +--------------------------+ | | | | +----------------+ | | | Data Block 1 | | | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+ + +--------------------------+ | | | +----------------+ | | | CPER | | | ................. | | | +--->| | ack_value1 | | | | CPER | | | error_status_address-----+---+ | | | +----------------+ | | | .... | | | ................. | | | | | ............. | | | | CPER | | | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+ | | read_ack_preserve | | +->| | ack_value10 | | | |.......... | | | read_ack_write | | | | +----------------+ | | +------------+ + +--------------------------| | | | | Error Status | | | ............... | | | | | Data Block 10| + +--------------------------+ | | +---->| +------------+ | | GHES10 | | | | | CPER | + +--------------------------+ | | | | CPER | | | ................. | | | | | .... | | | error_status_address-----+-----+ | | | CPER | | | ................. | | +-+------------+ | | read_ack_register--------+---------+ | | read_ack_preserve | | | read_ack_write | + +--------------------------+ For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register. so user space must check the ack value to avoid read-write race condition. Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> --- hw/acpi/aml-build.c | 2 + hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++ hw/arm/virt-acpi-build.c | 6 + include/hw/acpi/aml-build.h | 1 + include/hw/acpi/hest_ghes.h | 47 ++++++ 5 files changed, 401 insertions(+) create mode 100644 hw/acpi/hest_ghes.c create mode 100644 include/hw/acpi/hest_ghes.h