@@ -521,6 +521,12 @@ config CHT_WC_PMIC_OPREGION
help
This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
+config CHT_DC_TI_PMIC_OPREGION
+ bool "ACPI operation region support for Dollar Cove TI PMIC"
+ depends on INTEL_SOC_PMIC_CHTDC_TI
+ help
+ This config adds ACPI operation region support for Dollar Cove TI PMIC.
+
endif
config ACPI_CONFIGFS
@@ -103,6 +103,7 @@ obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o
obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o
+obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_chtdc_ti.o
obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o
new file mode 100644
@@ -0,0 +1,137 @@
+/*
+ * Dollar Cove TI PMIC operation region driver
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * Rewritten and cleaned up
+ * Copyright (C) 2017 Takashi Iwai <tiwai@suse.de>
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+/* registers stored in 16bit BE (high:low, total 10bit) */
+#define CHTDC_TI_VBAT 0x54
+#define CHTDC_TI_DIETEMP 0x56
+#define CHTDC_TI_BPTHERM 0x58
+#define CHTDC_TI_GPADC 0x5a
+
+static struct pmic_table chtdc_ti_power_table[] = {
+ { .address = 0x00, .reg = 0x41 },
+ { .address = 0x04, .reg = 0x42 },
+ { .address = 0x08, .reg = 0x43 },
+ { .address = 0x0c, .reg = 0x45 },
+ { .address = 0x10, .reg = 0x46 },
+ { .address = 0x14, .reg = 0x47 },
+ { .address = 0x18, .reg = 0x48 },
+ { .address = 0x1c, .reg = 0x49 },
+ { .address = 0x20, .reg = 0x4a },
+ { .address = 0x24, .reg = 0x4b },
+ { .address = 0x28, .reg = 0x4c },
+ { .address = 0x2c, .reg = 0x4d },
+ { .address = 0x30, .reg = 0x4e },
+};
+
+static struct pmic_table chtdc_ti_thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = CHTDC_TI_GPADC
+ },
+ {
+ .address = 0x0c,
+ .reg = CHTDC_TI_GPADC
+ },
+ /* TMP2 -> SYSTEMP */
+ {
+ .address = 0x18,
+ .reg = CHTDC_TI_GPADC
+ },
+ /* TMP3 -> BPTHERM */
+ {
+ .address = 0x24,
+ .reg = CHTDC_TI_BPTHERM
+ },
+ {
+ .address = 0x30,
+ .reg = CHTDC_TI_GPADC
+ },
+ /* TMP5 -> DIETEMP */
+ {
+ .address = 0x3c,
+ .reg = CHTDC_TI_DIETEMP
+ },
+};
+
+static int chtdc_ti_pmic_get_power(struct regmap *regmap, int reg, int bit,
+ u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = data & 1;
+ return 0;
+}
+
+static int chtdc_ti_pmic_update_power(struct regmap *regmap, int reg, int bit,
+ bool on)
+{
+ return regmap_update_bits(regmap, reg, 1, on);
+}
+
+static int chtdc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ u8 buf[2];
+
+ if (regmap_bulk_read(regmap, reg, buf, 2))
+ return -EIO;
+
+ /* stored in big-endian */
+ return ((buf[0] & 0x03) << 8) | buf[1];
+}
+
+static struct intel_pmic_opregion_data chtdc_ti_pmic_opregion_data = {
+ .get_power = chtdc_ti_pmic_get_power,
+ .update_power = chtdc_ti_pmic_update_power,
+ .get_raw_temp = chtdc_ti_pmic_get_raw_temp,
+ .power_table = chtdc_ti_power_table,
+ .power_table_count = ARRAY_SIZE(chtdc_ti_power_table),
+ .thermal_table = chtdc_ti_thermal_table,
+ .thermal_table_count = ARRAY_SIZE(chtdc_ti_thermal_table),
+};
+
+static int chtdc_ti_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ int err;
+
+ err = intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+ &chtdc_ti_pmic_opregion_data);
+ if (err < 0)
+ return err;
+
+ /* Re-enumerate devices depending on PMIC */
+ acpi_walk_dep_device_list(ACPI_HANDLE(pdev->dev.parent));
+ return 0;
+}
+
+static const struct platform_device_id chtdc_ti_pmic_opregion_id_table[] = {
+ { .name = "chtdc_ti_region" },
+ {},
+};
+
+static struct platform_driver chtdc_ti_pmic_opregion_driver = {
+ .probe = chtdc_ti_pmic_opregion_probe,
+ .driver = {
+ .name = "cht_dollar_cove_ti_pmic",
+ },
+ .id_table = chtdc_ti_pmic_opregion_id_table,
+};
+module_platform_driver(chtdc_ti_pmic_opregion_driver);
+
+MODULE_DESCRIPTION("Dollar Cove TI PMIC opregion driver");
+MODULE_LICENSE("GPL v2");
This patch adds the opregion driver for Dollar Cove TI PMIC on Intel Cherry Trail devices. The patch is based on the original work by Intel, found at: https://github.com/01org/ProductionKernelQuilts with many cleanups and rewrites. The driver is currently provided only as built-in to follow other PMIC opregion drivers convention. The re-enumeration of devices at probe is required for fixing the issues on HP x2 210 G2. See bug#195689. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> --- v4->v5: * no change in this driver v3->v4: * Rename dc_ti with chtdc_ti in all places v2->v3: * Rename dc_ti with chtdc_ti in all places * Driver/kconfig renames accordingly * Constification * Added acks by Andy and Mika v1->v2: * get_raw_temp cleanup in opregion driver, mention about register endianess drivers/acpi/Kconfig | 6 ++ drivers/acpi/Makefile | 1 + drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 137 ++++++++++++++++++++++++++++++++ 3 files changed, 144 insertions(+) create mode 100644 drivers/acpi/pmic/intel_pmic_chtdc_ti.c