| Message ID | 1505207272-16983-2-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > Change the comptiable for support of multi-platform > Add description for reg > Add description for source_cg > Add description for mediatek,latch-ck This is at least the 3rd patch with exactly the same vague subject. Please make the subject somewhat unique. > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > --- > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > 1 file changed, 10 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > index 4182ea3..405cd06 100644 > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > and the properties used by the msdc driver. > > Required properties: > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > +- compatible: value should be either of the following. > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > +- reg: physical base address of the controller and length > - interrupts: Should contain MSDC interrupt number > -- clocks: MSDC source clock, HCLK > -- clock-names: "source", "hclk" > +- clocks: MSDC source clock, HCLK, source_cg > +- clock-names: "source", "hclk", "source_cg" All chips support source_cg? That's not backwards compatible for existing compatible strings if the driver requires it. > - pinctrl-names: should be "default", "state_uhs" > - pinctrl-0: should contain default/high speed pin ctrl > - pinctrl-1: should contain uhs mode pin ctrl > @@ -30,6 +35,8 @@ Optional properties: > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection > If present,HS400 command responses are sampled on rising edges. > If not present,HS400 command responses are sampled on falling edges. > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc What's a project? > + error caused by stop clock(fifo full) > > Examples: > mmc0: mmc@11230000 { > -- > 1.8.1.1.dirty > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > Change the comptiable for support of multi-platform > > Add description for reg > > Add description for source_cg > > Add description for mediatek,latch-ck > > This is at least the 3rd patch with exactly the same vague subject. > Please make the subject somewhat unique. > Thx, will change the subject at next version > > > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > --- > > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > 1 file changed, 10 insertions(+), 3 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > index 4182ea3..405cd06 100644 > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > and the properties used by the msdc driver. > > > > Required properties: > > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > +- compatible: value should be either of the following. > > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > +- reg: physical base address of the controller and length > > - interrupts: Should contain MSDC interrupt number > > -- clocks: MSDC source clock, HCLK > > -- clock-names: "source", "hclk" > > +- clocks: MSDC source clock, HCLK, source_cg > > +- clock-names: "source", "hclk", "source_cg" > > All chips support source_cg? That's not backwards compatible for > existing compatible strings if the driver requires it. Not all chips support source_cg, for chips which do not support source_cg, no need source_cg here, and the driver will parse it to know if current chip support it. > > > - pinctrl-names: should be "default", "state_uhs" > > - pinctrl-0: should contain default/high speed pin ctrl > > - pinctrl-1: should contain uhs mode pin ctrl > > @@ -30,6 +35,8 @@ Optional properties: > > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection > > If present,HS400 command responses are sampled on rising edges. > > If not present,HS400 command responses are sampled on falling edges. > > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc > > What's a project? eg, MT2701 > > > + error caused by stop clock(fifo full) > > > > Examples: > > mmc0: mmc@11230000 { > > -- > > 1.8.1.1.dirty > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Sep 14, 2017 at 4:10 AM, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc >> >> What's a project? > eg, MT2701 Replace the word "project" with the word "system" or "SoC" in your patch. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > Change the comptiable for support of multi-platform >> > Add description for reg >> > Add description for source_cg >> > Add description for mediatek,latch-ck >> >> This is at least the 3rd patch with exactly the same vague subject. >> Please make the subject somewhat unique. >> > Thx, will change the subject at next version >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> >> > --- >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- >> > 1 file changed, 10 insertions(+), 3 deletions(-) >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > index 4182ea3..405cd06 100644 >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt >> > and the properties used by the msdc driver. >> > >> > Required properties: >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" >> > +- compatible: value should be either of the following. >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 >> > +- reg: physical base address of the controller and length >> > - interrupts: Should contain MSDC interrupt number >> > -- clocks: MSDC source clock, HCLK >> > -- clock-names: "source", "hclk" >> > +- clocks: MSDC source clock, HCLK, source_cg >> > +- clock-names: "source", "hclk", "source_cg" >> >> All chips support source_cg? That's not backwards compatible for >> existing compatible strings if the driver requires it. > Not all chips support source_cg, for chips which do not support > source_cg, no need source_cg here, and the driver will parse it > to know if current chip support it. In such case you must not add add a required binding for it. I think that is what Rob is trying to point out for you. [...] Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > >> > Change the comptiable for support of multi-platform > >> > Add description for reg > >> > Add description for source_cg > >> > Add description for mediatek,latch-ck > >> > >> This is at least the 3rd patch with exactly the same vague subject. > >> Please make the subject somewhat unique. > >> > > Thx, will change the subject at next version > >> > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > >> > --- > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > >> > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > index 4182ea3..405cd06 100644 > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > >> > and the properties used by the msdc driver. > >> > > >> > Required properties: > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > >> > +- compatible: value should be either of the following. > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > >> > +- reg: physical base address of the controller and length > >> > - interrupts: Should contain MSDC interrupt number > >> > -- clocks: MSDC source clock, HCLK > >> > -- clock-names: "source", "hclk" > >> > +- clocks: MSDC source clock, HCLK, source_cg > >> > +- clock-names: "source", "hclk", "source_cg" > >> > >> All chips support source_cg? That's not backwards compatible for > >> existing compatible strings if the driver requires it. > > Not all chips support source_cg, for chips which do not support > > source_cg, no need source_cg here, and the driver will parse it > > to know if current chip support it. > > In such case you must not add add a required binding for it. I think > that is what Rob is trying to point out for you. > > [...] > > Kind regards > Uffe The source_cg is required(MUST) at MT2712 and future SoCs, but not required(do not have it) at previous SoCs, so that put it at required properties, let the driver to handle it. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > >> > Change the comptiable for support of multi-platform > > >> > Add description for reg > > >> > Add description for source_cg > > >> > Add description for mediatek,latch-ck > > >> > > >> This is at least the 3rd patch with exactly the same vague subject. > > >> Please make the subject somewhat unique. > > >> > > > Thx, will change the subject at next version > > >> > > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > >> > --- > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > > >> > > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > index 4182ea3..405cd06 100644 > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > >> > and the properties used by the msdc driver. > > >> > > > >> > Required properties: > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > >> > +- compatible: value should be either of the following. > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > >> > +- reg: physical base address of the controller and length > > >> > - interrupts: Should contain MSDC interrupt number > > >> > -- clocks: MSDC source clock, HCLK > > >> > -- clock-names: "source", "hclk" > > >> > +- clocks: MSDC source clock, HCLK, source_cg > > >> > +- clock-names: "source", "hclk", "source_cg" > > >> > > >> All chips support source_cg? That's not backwards compatible for > > >> existing compatible strings if the driver requires it. > > > Not all chips support source_cg, for chips which do not support > > > source_cg, no need source_cg here, and the driver will parse it > > > to know if current chip support it. > > > > In such case you must not add add a required binding for it. I think > > that is what Rob is trying to point out for you. > > > > [...] > > > > Kind regards > > Uffe > The source_cg is required(MUST) at MT2712 and future SoCs, but not > required(do not have it) at previous SoCs, so that put it at required > properties, let the driver to handle it. Any other comments about it ? still must not add a required binding for it ? if add a optional binding for it, how to add it ? as cannot duplicate "clocks" & "clock-names" in one node. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[...] >> > >> > Required properties: >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" >> > >> > +- compatible: value should be either of the following. >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 >> > >> > +- reg: physical base address of the controller and length >> > >> > - interrupts: Should contain MSDC interrupt number >> > >> > -- clocks: MSDC source clock, HCLK >> > >> > -- clock-names: "source", "hclk" >> > >> > +- clocks: MSDC source clock, HCLK, source_cg >> > >> > +- clock-names: "source", "hclk", "source_cg" >> > >> >> > >> All chips support source_cg? That's not backwards compatible for >> > >> existing compatible strings if the driver requires it. >> > > Not all chips support source_cg, for chips which do not support >> > > source_cg, no need source_cg here, and the driver will parse it >> > > to know if current chip support it. >> > >> > In such case you must not add add a required binding for it. I think >> > that is what Rob is trying to point out for you. >> > >> > [...] >> > >> > Kind regards >> > Uffe >> The source_cg is required(MUST) at MT2712 and future SoCs, but not >> required(do not have it) at previous SoCs, so that put it at required >> properties, let the driver to handle it. Then you must explain that in the binding... On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: >> > >> > Change the comptiable for support of multi-platform >> > >> > Add description for reg >> > >> > Add description for source_cg >> > >> > Add description for mediatek,latch-ck >> > >> >> > >> This is at least the 3rd patch with exactly the same vague subject. >> > >> Please make the subject somewhat unique. >> > >> >> > > Thx, will change the subject at next version >> > >> > >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> >> > >> > --- >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-) >> > >> > >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > index 4182ea3..405cd06 100644 >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt >> > >> > and the properties used by the msdc driver. >> > >> > > > Any other comments about it ? still must not add a required binding for > it ? if add a optional binding for it, how to add it ? as cannot > duplicate "clocks" & "clock-names" in one node. > > I suggest you keep the description of the new clock name part of the "Required properties:" header. However, after each clock name, explicit state when the clock is required/optional. Something along the lines as sdhci-msm does it. Documentation/devicetree/bindings/mmc/sdhci-msm.txt Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 2017-09-29 at 09:56 +0800, Chaotian Jing wrote: > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > > On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > > > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > > > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > > > >> > Change the comptiable for support of multi-platform > > > >> > Add description for reg > > > >> > Add description for source_cg > > > >> > Add description for mediatek,latch-ck > > > >> > > > >> This is at least the 3rd patch with exactly the same vague subject. > > > >> Please make the subject somewhat unique. > > > >> > > > > Thx, will change the subject at next version > > > >> > > > > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > > >> > --- > > > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > > > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > > > >> > > > > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > index 4182ea3..405cd06 100644 > > > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > > > >> > and the properties used by the msdc driver. > > > >> > > > > >> > Required properties: > > > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > > >> > +- compatible: value should be either of the following. > > > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > > >> > +- reg: physical base address of the controller and length > > > >> > - interrupts: Should contain MSDC interrupt number > > > >> > -- clocks: MSDC source clock, HCLK > > > >> > -- clock-names: "source", "hclk" > > > >> > +- clocks: MSDC source clock, HCLK, source_cg > > > >> > +- clock-names: "source", "hclk", "source_cg" > > > >> > > > >> All chips support source_cg? That's not backwards compatible for > > > >> existing compatible strings if the driver requires it. > > > > Not all chips support source_cg, for chips which do not support > > > > source_cg, no need source_cg here, and the driver will parse it > > > > to know if current chip support it. > > > > > > In such case you must not add add a required binding for it. I think > > > that is what Rob is trying to point out for you. > > > > > > [...] > > > > > > Kind regards > > > Uffe > > The source_cg is required(MUST) at MT2712 and future SoCs, but not > > required(do not have it) at previous SoCs, so that put it at required > > properties, let the driver to handle it. > > Any other comments about it ? still must not add a required binding for > it ? if add a optional binding for it, how to add it ? as cannot > duplicate "clocks" & "clock-names" in one node. Chaotian, You can follow examples of scpsys [1]: - clock, clock-names: clocks according to the common clock binding. These are clocks which hardware needs to be enabled before enabling certain power domains. Required clocks for MT2701: "mm", "mfg", "ethif" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" [1]: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt?h=v4.13.4 Joe.C -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2017-10-02 at 08:53 +0200, Ulf Hansson wrote: > [...] > > >> > >> > Required properties: > >> > >> > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > >> > >> > +- compatible: value should be either of the following. > >> > >> > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > >> > >> > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > >> > >> > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > >> > >> > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > >> > >> > +- reg: physical base address of the controller and length > >> > >> > - interrupts: Should contain MSDC interrupt number > >> > >> > -- clocks: MSDC source clock, HCLK > >> > >> > -- clock-names: "source", "hclk" > >> > >> > +- clocks: MSDC source clock, HCLK, source_cg > >> > >> > +- clock-names: "source", "hclk", "source_cg" > >> > >> > >> > >> All chips support source_cg? That's not backwards compatible for > >> > >> existing compatible strings if the driver requires it. > >> > > Not all chips support source_cg, for chips which do not support > >> > > source_cg, no need source_cg here, and the driver will parse it > >> > > to know if current chip support it. > >> > > >> > In such case you must not add add a required binding for it. I think > >> > that is what Rob is trying to point out for you. > >> > > >> > [...] > >> > > >> > Kind regards > >> > Uffe > >> The source_cg is required(MUST) at MT2712 and future SoCs, but not > >> required(do not have it) at previous SoCs, so that put it at required > >> properties, let the driver to handle it. > > Then you must explain that in the binding... > > On 29 September 2017 at 03:56, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > On Wed, 2017-09-27 at 09:18 +0800, Chaotian Jing wrote: > >> On Wed, 2017-09-27 at 00:33 +0200, Ulf Hansson wrote: > >> > On 14 September 2017 at 04:10, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > >> > > On Wed, 2017-09-13 at 09:10 -0500, Rob Herring wrote: > >> > >> On Tue, Sep 12, 2017 at 05:07:41PM +0800, Chaotian Jing wrote: > >> > >> > Change the comptiable for support of multi-platform > >> > >> > Add description for reg > >> > >> > Add description for source_cg > >> > >> > Add description for mediatek,latch-ck > >> > >> > >> > >> This is at least the 3rd patch with exactly the same vague subject. > >> > >> Please make the subject somewhat unique. > >> > >> > >> > > Thx, will change the subject at next version > >> > >> > > >> > >> > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > >> > >> > --- > >> > >> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- > >> > >> > 1 file changed, 10 insertions(+), 3 deletions(-) > >> > >> > > >> > >> > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > index 4182ea3..405cd06 100644 > >> > >> > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > >> > >> > @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt > >> > >> > and the properties used by the msdc driver. > >> > >> > > > > > Any other comments about it ? still must not add a required binding for > > it ? if add a optional binding for it, how to add it ? as cannot > > duplicate "clocks" & "clock-names" in one node. > > > > > > I suggest you keep the description of the new clock name part of the > "Required properties:" header. However, after each clock name, > explicit state when the clock is required/optional. Something along > the lines as sdhci-msm does it. > Documentation/devicetree/bindings/mmc/sdhci-msm.txt > > Kind regards > Uffe Thx, I will send a new series of patch v2 to review. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea3..405cd06 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: MSDC source clock, HCLK, source_cg +- clock-names: "source", "hclk", "source_cg" - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +35,8 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some projects do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) Examples: mmc0: mmc@11230000 {
Change the comptiable for support of multi-platform Add description for reg Add description for source_cg Add description for mediatek,latch-ck Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)