| Message ID | 20170922063333.7923-1-chandan@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Fri, Sep 22, 2017 at 12:03:33PM +0530, Chandan Rajendra wrote: > Executing xfs/104 test in a loop on Linux-v4.13 kernel on a ppc64 > machine can cause the following NULL pointer dereference, > > Unable to handle kernel paging request for data at address 0x00000100 > Faulting instruction address: 0xc0000000000fece8 > Oops: Kernel access of bad area, sig: 11 [#1] > SMP NR_CPUS=2048 > DEBUG_PAGEALLOC > NUMA > pSeries > Modules linked in: > CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.13.0 #1 > task: c00000063849c200 task.stack: c0000006384f0000 > NIP: c0000000000fece8 LR: c0000000000ff2cc CTR: c000000000383380 > REGS: c00000063ffdb400 TRAP: 0300 Not tainted (4.13.0) > MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI> > CR: 28002222 XER: 20000000 > CFAR: c0000000000227a4 DAR: 0000000000000100 DSISR: 40000000 SOFTE: 0 > GPR00: c0000000000ff2cc c00000063ffdb680 c000000001252e00 0000000000000800 > GPR04: 0000000000000000 c0000006387b8730 c000000633d5db70 0000000fffffffe1 > GPR08: c0000003aa89ed68 0000000000000000 0000000000000000 c000000633d5db70 > GPR12: 0000000028002422 c00000000fd80a00 c0000006384f3f90 c00000063ffd8000 > GPR16: 0000000000000000 c0000006387b8730 c0000000012475e0 c0000000012475e0 > GPR20: 0000000000000002 0000000000000000 0000000000000001 0000000000000002 > GPR24: 0000000000000010 c00000063e155800 0000000000000800 0000000000000800 > GPR28: 0000000000000000 c000000633d5db00 0000000000000000 0000000000000000 > NIP [c0000000000fece8] .__queue_work+0x68/0x600 > LR [c0000000000ff2cc] .queue_work_on+0x4c/0x80 > Call Trace: > [c00000063ffdb680] [c00000063ffdb720] 0xc00000063ffdb720 (unreliable) > [c00000063ffdb770] [c0000000000ff2cc] .queue_work_on+0x4c/0x80 > [c00000063ffdb7f0] [c00000000038343c] .iomap_dio_bio_end_io+0xbc/0x1f0 > [c00000063ffdb880] [c0000000006cdc18] .bio_endio+0x118/0x1f0 > [c00000063ffdb910] [c0000000006d9e30] .blk_update_request+0xd0/0x470 > [c00000063ffdb9b0] [c0000000006e8284] .blk_mq_end_request+0x24/0xc0 > [c00000063ffdba30] [c00000000082ba50] .lo_complete_rq+0x40/0xe0 > [c00000063ffdbab0] [c0000000006e5e48] .__blk_mq_complete_request_remote+0x28/0x40 > [c00000063ffdbb20] [c00000000018e674] .flush_smp_call_function_queue+0xc4/0x1e0 > [c00000063ffdbbb0] [c00000000003f94c] .smp_ipi_demux_relaxed+0x8c/0x100 > [c00000063ffdbc40] [c000000000081054] .icp_hv_ipi_action+0x54/0xa0 > [c00000063ffdbcc0] [c0000000001505a4] .__handle_irq_event_percpu+0x84/0x2c0 > [c00000063ffdbd90] [c000000000150808] .handle_irq_event_percpu+0x28/0x80 > [c00000063ffdbe20] [c000000000156858] .handle_percpu_irq+0x78/0xc0 > [c00000063ffdbea0] [c00000000014ee70] .generic_handle_irq+0x40/0x70 > [c00000063ffdbf10] [c000000000015a88] .__do_irq+0x88/0x200 > [c00000063ffdbf90] [c000000000027a70] .call_do_irq+0x14/0x24 > [c0000006384f3810] [c000000000015c84] .do_IRQ+0x84/0x130 Can you please trim down the oops stack for the commit message? All that we really need is the stack trace - the arch specific register dumps don't add anything of value to the commit message. i.e: .queue_work_on .iomap_dio_bio_end_io .bio_endio .blk_update_request .blk_mq_end_request .lo_complete_rq .__blk_mq_complete_request_remote .flush_smp_call_function_queue .smp_ipi_demux_relaxed .icp_hv_ipi_action .__handle_irq_event_percpu .handle_irq_event_percpu .handle_percpu_irq .generic_handle_irq .__do_irq .call_do_irq .do_IRQ Cheers, Dave. > > This occurs due to the following sequence of events, > > 1. Allocate dio for Direct I/O write. > 2. Invoke iomap_apply() until iov_iter_count() bytes have been submitted. > - Assume that we have submitted atleast one bio. Hence iomap_dio->ref value > will be >= 2. > - If during the second iteration, iomap_apply() ends up returning -ENOSPC, we would > break out of the loop and since the 'ret' value is a negative number we > end up not allocating memory for super_block->s_dio_done_wq. > 3. Meanwhile, iomap_dio_bio_end_io() is invoked for bios that have been > submitted and here the code ends up dereferencing the NULL pointer stored > at super_block->s_dio_done_wq. > > This commit fixes the bug by allocating memory for > super_block->s_dio_done_wq before iomap_apply() is invoked. > > Reported-by: Eryu Guan <eguan@redhat.com> > Reviewed-by: Christoph Hellwig <hch@lst.de> > Tested-by: Eryu Guan <eguan@redhat.com> > Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> > --- > > Changelog: > v1->v2: > 1. Fix indentation for the continuation of the if conditional. > > fs/iomap.c | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/fs/iomap.c b/fs/iomap.c > index 269b24a..d4f526a 100644 > --- a/fs/iomap.c > +++ b/fs/iomap.c > @@ -993,6 +993,13 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, > WARN_ON_ONCE(ret); > ret = 0; > > + if (iov_iter_rw(iter) == WRITE && !is_sync_kiocb(iocb) && > + !inode->i_sb->s_dio_done_wq) { > + ret = sb_init_dio_done_wq(inode->i_sb); > + if (ret < 0) > + goto out_free_dio; > + } > + > inode_dio_begin(inode); > > blk_start_plug(&plug); > @@ -1015,13 +1022,6 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, > if (ret < 0) > iomap_dio_set_error(dio, ret); > > - if (ret >= 0 && iov_iter_rw(iter) == WRITE && !is_sync_kiocb(iocb) && > - !inode->i_sb->s_dio_done_wq) { > - ret = sb_init_dio_done_wq(inode->i_sb); > - if (ret < 0) > - iomap_dio_set_error(dio, ret); > - } > - > if (!atomic_dec_and_test(&dio->ref)) { > if (!is_sync_kiocb(iocb)) > return -EIOCBQUEUED; > -- > 2.9.5 > >
diff --git a/fs/iomap.c b/fs/iomap.c index 269b24a..d4f526a 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -993,6 +993,13 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, WARN_ON_ONCE(ret); ret = 0; + if (iov_iter_rw(iter) == WRITE && !is_sync_kiocb(iocb) && + !inode->i_sb->s_dio_done_wq) { + ret = sb_init_dio_done_wq(inode->i_sb); + if (ret < 0) + goto out_free_dio; + } + inode_dio_begin(inode); blk_start_plug(&plug); @@ -1015,13 +1022,6 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter, if (ret < 0) iomap_dio_set_error(dio, ret); - if (ret >= 0 && iov_iter_rw(iter) == WRITE && !is_sync_kiocb(iocb) && - !inode->i_sb->s_dio_done_wq) { - ret = sb_init_dio_done_wq(inode->i_sb); - if (ret < 0) - iomap_dio_set_error(dio, ret); - } - if (!atomic_dec_and_test(&dio->ref)) { if (!is_sync_kiocb(iocb)) return -EIOCBQUEUED;
Executing xfs/104 test in a loop on Linux-v4.13 kernel on a ppc64 machine can cause the following NULL pointer dereference, Unable to handle kernel paging request for data at address 0x00000100 Faulting instruction address: 0xc0000000000fece8 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries Modules linked in: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.13.0 #1 task: c00000063849c200 task.stack: c0000006384f0000 NIP: c0000000000fece8 LR: c0000000000ff2cc CTR: c000000000383380 REGS: c00000063ffdb400 TRAP: 0300 Not tainted (4.13.0) MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI> CR: 28002222 XER: 20000000 CFAR: c0000000000227a4 DAR: 0000000000000100 DSISR: 40000000 SOFTE: 0 GPR00: c0000000000ff2cc c00000063ffdb680 c000000001252e00 0000000000000800 GPR04: 0000000000000000 c0000006387b8730 c000000633d5db70 0000000fffffffe1 GPR08: c0000003aa89ed68 0000000000000000 0000000000000000 c000000633d5db70 GPR12: 0000000028002422 c00000000fd80a00 c0000006384f3f90 c00000063ffd8000 GPR16: 0000000000000000 c0000006387b8730 c0000000012475e0 c0000000012475e0 GPR20: 0000000000000002 0000000000000000 0000000000000001 0000000000000002 GPR24: 0000000000000010 c00000063e155800 0000000000000800 0000000000000800 GPR28: 0000000000000000 c000000633d5db00 0000000000000000 0000000000000000 NIP [c0000000000fece8] .__queue_work+0x68/0x600 LR [c0000000000ff2cc] .queue_work_on+0x4c/0x80 Call Trace: [c00000063ffdb680] [c00000063ffdb720] 0xc00000063ffdb720 (unreliable) [c00000063ffdb770] [c0000000000ff2cc] .queue_work_on+0x4c/0x80 [c00000063ffdb7f0] [c00000000038343c] .iomap_dio_bio_end_io+0xbc/0x1f0 [c00000063ffdb880] [c0000000006cdc18] .bio_endio+0x118/0x1f0 [c00000063ffdb910] [c0000000006d9e30] .blk_update_request+0xd0/0x470 [c00000063ffdb9b0] [c0000000006e8284] .blk_mq_end_request+0x24/0xc0 [c00000063ffdba30] [c00000000082ba50] .lo_complete_rq+0x40/0xe0 [c00000063ffdbab0] [c0000000006e5e48] .__blk_mq_complete_request_remote+0x28/0x40 [c00000063ffdbb20] [c00000000018e674] .flush_smp_call_function_queue+0xc4/0x1e0 [c00000063ffdbbb0] [c00000000003f94c] .smp_ipi_demux_relaxed+0x8c/0x100 [c00000063ffdbc40] [c000000000081054] .icp_hv_ipi_action+0x54/0xa0 [c00000063ffdbcc0] [c0000000001505a4] .__handle_irq_event_percpu+0x84/0x2c0 [c00000063ffdbd90] [c000000000150808] .handle_irq_event_percpu+0x28/0x80 [c00000063ffdbe20] [c000000000156858] .handle_percpu_irq+0x78/0xc0 [c00000063ffdbea0] [c00000000014ee70] .generic_handle_irq+0x40/0x70 [c00000063ffdbf10] [c000000000015a88] .__do_irq+0x88/0x200 [c00000063ffdbf90] [c000000000027a70] .call_do_irq+0x14/0x24 [c0000006384f3810] [c000000000015c84] .do_IRQ+0x84/0x130 This occurs due to the following sequence of events, 1. Allocate dio for Direct I/O write. 2. Invoke iomap_apply() until iov_iter_count() bytes have been submitted. - Assume that we have submitted atleast one bio. Hence iomap_dio->ref value will be >= 2. - If during the second iteration, iomap_apply() ends up returning -ENOSPC, we would break out of the loop and since the 'ret' value is a negative number we end up not allocating memory for super_block->s_dio_done_wq. 3. Meanwhile, iomap_dio_bio_end_io() is invoked for bios that have been submitted and here the code ends up dereferencing the NULL pointer stored at super_block->s_dio_done_wq. This commit fixes the bug by allocating memory for super_block->s_dio_done_wq before iomap_apply() is invoked. Reported-by: Eryu Guan <eguan@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> --- Changelog: v1->v2: 1. Fix indentation for the continuation of the if conditional. fs/iomap.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)