| Message ID | 20170928075149.8154-5-joel@jms.id.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Sep 28, 2017 at 12:51 AM, Joel Stanley <joel@jms.id.au> wrote: > Enable the buses that are in use and the devices that are attached. > Currently that is just the battery backed RTC. > > Some of these buses are for hotplugged cards, such as PCIe cards. Others > do not yet have upstream drivers, so there are no devices attached. > > Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote: > Enable the buses that are in use and the devices that are attached. > Currently that is just the battery backed RTC. > > Some of these buses are for hotplugged cards, such as PCIe cards. Others > do not yet have upstream drivers, so there are no devices attached. > > Signed-off-by: Joel Stanley <joel@jms.id.au> > --- > arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++ > 1 file changed, 54 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > index 1190fec1b5d0..f79c1d21c47f 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > @@ -79,3 +79,57 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_rmii1_default>; > }; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > +}; > + > +&i2c4 { > + status = "okay"; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + /* PCIe slot 1 (x8) */ > + status = "enabled"; This is not okay. Neither are those below. Cheers, Andrew > +}; > + > +&i2c7 { > + /* PCIe slot 2 (x16) */ > + status = "enabled"; > +}; > + > +&i2c8 { > + /* PCIe slot 3 (x16) */ > + status = "enabled"; > +}; > + > +&i2c9 { > + /* PCIe slot 4 (x16) */ > + status = "enabled"; > +}; > + > +&i2c10 { > + /* PCIe slot 5 (x8) */ > + status = "enabled"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + rtc@32 { > + compatible = "epson,rx8900"; > + reg = <0x32>; > + }; > +}; > + > +&i2c12 { > + status = "okay"; > +};
On Wed, Oct 4, 2017 at 2:32 PM, Andrew Jeffery <andrew@aj.id.au> wrote: > On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote: >> Enable the buses that are in use and the devices that are attached. >> Currently that is just the battery backed RTC. >> >> Some of these buses are for hotplugged cards, such as PCIe cards. Others >> do not yet have upstream drivers, so there are no devices attached. >> >> Signed-off-by: Joel Stanley <joel@jms.id.au> >> --- >> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++ >> 1 file changed, 54 insertions(+) >> >> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> index 1190fec1b5d0..f79c1d21c47f 100644 >> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts >> @@ -79,3 +79,57 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_rmii1_default>; >> }; >> + >> +&i2c2 { >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + status = "okay"; >> +}; >> + >> +&i2c4 { >> + status = "okay"; >> +}; >> + >> +&i2c5 { >> + status = "okay"; >> +}; >> + >> +&i2c6 { >> + /* PCIe slot 1 (x8) */ >> + status = "enabled"; > > This is not okay. Neither are those below. Hah. Well spotted. Cheers, Joel
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 1190fec1b5d0..f79c1d21c47f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -79,3 +79,57 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + /* PCIe slot 1 (x8) */ + status = "enabled"; +}; + +&i2c7 { + /* PCIe slot 2 (x16) */ + status = "enabled"; +}; + +&i2c8 { + /* PCIe slot 3 (x16) */ + status = "enabled"; +}; + +&i2c9 { + /* PCIe slot 4 (x16) */ + status = "enabled"; +}; + +&i2c10 { + /* PCIe slot 5 (x8) */ + status = "enabled"; +}; + +&i2c11 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c12 { + status = "okay"; +};
Enable the buses that are in use and the devices that are attached. Currently that is just the battery backed RTC. Some of these buses are for hotplugged cards, such as PCIe cards. Others do not yet have upstream drivers, so there are no devices attached. Signed-off-by: Joel Stanley <joel@jms.id.au> --- arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)