| Message ID | 1506083824-4024-14-git-send-email-adrian.hunter@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 22 September 2017 at 14:37, Adrian Hunter <adrian.hunter@intel.com> wrote: > Add CQE support to the block driver, including: > - optionally using DCMD for flush requests > - "manually" issuing discard requests > - issuing read / write requests to the CQE > - supporting block-layer timeouts > - handling recovery > - supporting re-tuning > > CQE offers 25% - 50% better random multi-threaded I/O. There is a slight > (e.g. 2%) drop in sequential read speed but no observable change to sequential > write. > > CQE automatically sends the commands to complete requests. However it only > supports reads / writes and so-called "direct commands" (DCMD). Furthermore > DCMD is limited to one command at a time, but discards require 3 commands. > That makes issuing discards through CQE very awkward, but some CQE's don't > support DCMD anyway. So for discards, the existing non-CQE approach is > taken, where the mmc core code issues the 3 commands one at a time i.e. > mmc_erase(). Where DCMD is used, is for issuing flushes. > > For host controllers without CQE support, blk-mq support is extended to > synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, > asynchonous reads/writes. The advantage of asynchronous reads/writes is > that it allows the preparation of the next request while the current > request is in progress. > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/core/block.c | 732 ++++++++++++++++++++++++++++++++++++++++++++++- > drivers/mmc/core/block.h | 8 + > drivers/mmc/core/queue.c | 427 +++++++++++++++++++++++++-- > drivers/mmc/core/queue.h | 54 +++- > 4 files changed, 1189 insertions(+), 32 deletions(-) I have re-started to review this change now, however as stated earlier - the total number changes really doesn't make this easy to review. Until I am done, I have published a new cmdq_v9 branch via my mmc tree. Kind regards Uffe > > diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c > index c29dbcec7c61..d317fc306a0e 100644 > --- a/drivers/mmc/core/block.c > +++ b/drivers/mmc/core/block.c > @@ -112,6 +112,7 @@ struct mmc_blk_data { > #define MMC_BLK_WRITE BIT(1) > #define MMC_BLK_DISCARD BIT(2) > #define MMC_BLK_SECDISCARD BIT(3) > +#define MMC_BLK_CQE_RECOVERY BIT(4) > > /* > * Only set in main mmc_blk_data associated > @@ -1307,7 +1308,10 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) > else > mmc_blk_reset_success(md, type); > fail: > - blk_end_request(req, status, blk_rq_bytes(req)); > + if (req->mq_ctx) > + blk_mq_end_request(req, status); > + else > + blk_end_request(req, status, blk_rq_bytes(req)); > } > > static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, > @@ -1377,7 +1381,10 @@ static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, > if (!err) > mmc_blk_reset_success(md, type); > out: > - blk_end_request(req, status, blk_rq_bytes(req)); > + if (req->mq_ctx) > + blk_mq_end_request(req, status); > + else > + blk_end_request(req, status, blk_rq_bytes(req)); > } > > static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) > @@ -1387,7 +1394,10 @@ static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) > int ret = 0; > > ret = mmc_flush_cache(card); > - blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); > + if (req->mq_ctx) > + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); > + else > + blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); > } > > /* > @@ -1413,15 +1423,18 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, > } > } > > -#define CMD_ERRORS \ > - (R1_OUT_OF_RANGE | /* Command argument out of range */ \ > - R1_ADDRESS_ERROR | /* Misaligned address */ \ > +#define CMD_ERRORS_EXCL_OOR \ > + (R1_ADDRESS_ERROR | /* Misaligned address */ \ > R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\ > R1_WP_VIOLATION | /* Tried to write to protected block */ \ > R1_CARD_ECC_FAILED | /* Card ECC failed */ \ > R1_CC_ERROR | /* Card controller error */ \ > R1_ERROR) /* General/unknown error */ > > +#define CMD_ERRORS \ > + (CMD_ERRORS_EXCL_OOR | \ > + R1_OUT_OF_RANGE) /* Command argument out of range */ \ > + > static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) > { > u32 val; > @@ -1698,6 +1711,138 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, > *do_data_tag_p = do_data_tag; > } > > +#define MMC_CQE_RETRIES 2 > + > +static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_request *mrq = &mqrq->brq.mrq; > + struct request_queue *q = req->q; > + struct mmc_host *host = mq->card->host; > + unsigned long flags; > + bool put_card; > + int err; > + > + mmc_cqe_post_req(host, mrq); > + > + if (mrq->cmd && mrq->cmd->error) > + err = mrq->cmd->error; > + else if (mrq->data && mrq->data->error) > + err = mrq->data->error; > + else > + err = 0; > + > + if (err) { > + if (mqrq->retries++ < MMC_CQE_RETRIES) > + blk_mq_requeue_request(req, true); > + else > + blk_mq_end_request(req, BLK_STS_IOERR); > + } else if (mrq->data) { > + if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered)) > + blk_mq_requeue_request(req, true); > + else > + __blk_mq_end_request(req, BLK_STS_OK); > + } else { > + blk_mq_end_request(req, BLK_STS_OK); > + } > + > + spin_lock_irqsave(q->queue_lock, flags); > + > + mq->in_flight[mmc_issue_type(mq, req)] -= 1; > + > + put_card = mmc_tot_in_flight(mq) == 0; > + > + mmc_cqe_check_busy(mq); > + > + spin_unlock_irqrestore(q->queue_lock, flags); > + > + if (!mq->cqe_busy) > + blk_mq_run_hw_queues(q, true); > + > + if (put_card) > + mmc_put_card(mq->card, &mq->ctx); > +} > + > +void mmc_blk_cqe_recovery(struct mmc_queue *mq) > +{ > + struct mmc_card *card = mq->card; > + struct mmc_host *host = card->host; > + int err; > + > + pr_debug("%s: CQE recovery start\n", mmc_hostname(host)); > + > + err = mmc_cqe_recovery(host); > + if (err) > + mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY); > + else > + mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY); > + > + pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); > +} > + > +static void mmc_blk_cqe_req_done(struct mmc_request *mrq) > +{ > + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, > + brq.mrq); > + struct request *req = mmc_queue_req_to_req(mqrq); > + struct request_queue *q = req->q; > + struct mmc_queue *mq = q->queuedata; > + > + /* > + * Block layer timeouts race with completions which means the normal > + * completion path cannot be used during recovery. > + */ > + if (mq->in_recovery) > + mmc_blk_cqe_complete_rq(mq, req); > + else > + blk_mq_complete_request(req); > +} > + > +static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) > +{ > + mrq->done = mmc_blk_cqe_req_done; > + mrq->recovery_notifier = mmc_cqe_recovery_notifier; > + > + return mmc_cqe_start_req(host, mrq); > +} > + > +static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq, > + struct request *req) > +{ > + struct mmc_blk_request *brq = &mqrq->brq; > + > + memset(brq, 0, sizeof(*brq)); > + > + brq->mrq.cmd = &brq->cmd; > + brq->mrq.tag = req->tag; > + > + return &brq->mrq; > +} > + > +static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req); > + > + mrq->cmd->opcode = MMC_SWITCH; > + mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | > + (EXT_CSD_FLUSH_CACHE << 16) | > + (1 << 8) | > + EXT_CSD_CMD_SET_NORMAL; > + mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B; > + > + return mmc_blk_cqe_start_req(mq->card->host, mrq); > +} > + > +static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + > + mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL); > + > + return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq); > +} > + > static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, > struct mmc_card *card, > int disable_multi, > @@ -1766,6 +1911,579 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, > mqrq->areq.err_check = mmc_blk_err_check; > } > > +#define MMC_MAX_RETRIES 5 > +#define MMC_DATA_RETRIES 2 > +#define MMC_NO_RETRIES (MMC_MAX_RETRIES + 1) > + > +/* Single sector read during recovery */ > +static void mmc_blk_ss_read(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + blk_status_t status; > + > + while (1) { > + mmc_blk_rw_rq_prep(mqrq, mq->card, 1, mq); > + > + mmc_wait_for_req(mq->card->host, &mqrq->brq.mrq); > + > + /* > + * Not expecting command errors, so just give up in that case. > + * If there are retries remaining, the request will get > + * requeued. > + */ > + if (mqrq->brq.cmd.error) > + return; > + > + if (blk_rq_bytes(req) <= 512) > + break; > + > + status = mqrq->brq.data.error ? BLK_STS_IOERR : BLK_STS_OK; > + > + blk_update_request(req, status, 512); > + } > + > + mqrq->retries = MMC_NO_RETRIES; > +} > + > +static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq) > +{ > + return !!brq->mrq.sbc; > +} > + > +static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq) > +{ > + return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR; > +} > + > +static inline bool mmc_blk_in_tran_state(u32 status) > +{ > + /* > + * Some cards mishandle the status bits, so make sure to check both the > + * busy indication and the card state. > + */ > + return status & R1_READY_FOR_DATA && > + (R1_CURRENT_STATE(status) == R1_STATE_TRAN); > +} > + > +/* > + * Check for errors the host controller driver might not have seen such as > + * response mode errors or invalid card state. > + */ > +static bool mmc_blk_status_error(struct request *req, u32 status) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_blk_request *brq = &mqrq->brq; > + u32 stop_err_bits = mmc_blk_stop_err_bits(brq); > + > + return brq->cmd.resp[0] & CMD_ERRORS || > + brq->stop.resp[0] & stop_err_bits || > + status & stop_err_bits || > + (rq_data_dir(req) == WRITE && !mmc_blk_in_tran_state(status)); > +} > + > +static inline bool mmc_blk_cmd_started(struct mmc_blk_request *brq) > +{ > + return !brq->sbc.error && !brq->cmd.error && > + !(brq->cmd.resp[0] & CMD_ERRORS); > +} > + > +static unsigned int mmc_blk_clock_khz(struct mmc_host *host) > +{ > + if (host->actual_clock) > + return host->actual_clock / 1000; > + > + /* Clock may be subject to a divisor, fudge it by a factor of 2. */ > + if (host->ios.clock) > + return host->ios.clock / 2000; > + > + /* How can there be no clock */ > + WARN_ON_ONCE(1); > + return 100; /* 100 kHz is minimum possible value */ > +} > + > +static unsigned long mmc_blk_data_timeout_jiffies(struct mmc_host *host, > + struct mmc_data *data) > +{ > + unsigned int ms = DIV_ROUND_UP(data->timeout_ns, 1000000); > + unsigned int khz; > + > + if (data->timeout_clks) { > + khz = mmc_blk_clock_khz(host); > + ms += DIV_ROUND_UP(data->timeout_clks, khz); > + } > + > + return msecs_to_jiffies(ms); > +} > + > +static int mmc_blk_card_stuck(struct mmc_card *card, struct request *req, > + u32 *resp_errs) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_data *data = &mqrq->brq.data; > + unsigned long timeout; > + u32 status; > + int err; > + > + timeout = jiffies + mmc_blk_data_timeout_jiffies(card->host, data); > + > + while (1) { > + bool done = time_after(jiffies, timeout); > + > + err = __mmc_send_status(card, &status, 5); > + if (err) { > + pr_err("%s: error %d requesting status\n", > + req->rq_disk->disk_name, err); > + break; > + } > + > + /* Accumulate any response error bits seen */ > + if (resp_errs) > + *resp_errs |= status; > + > + if (mmc_blk_in_tran_state(status)) > + break; > + > + /* Timeout if the device never becomes ready */ > + if (done) { > + pr_err("%s: Card stuck in wrong state! %s %s\n", > + mmc_hostname(card->host), > + req->rq_disk->disk_name, __func__); > + err = -ETIMEDOUT; > + break; > + } > + } > + > + return err; > +} > + > +static int mmc_blk_send_stop(struct mmc_card *card) > +{ > + struct mmc_command cmd = { > + .opcode = MMC_STOP_TRANSMISSION, > + .flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC, > + }; > + > + return mmc_wait_for_cmd(card->host, &cmd, 5); > +} > + > +static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) > +{ > + int err; > + > + mmc_retune_hold_now(card->host); > + > + mmc_blk_send_stop(card); > + > + err = mmc_blk_card_stuck(card, req, NULL); > + > + mmc_retune_release(card->host); > + > + return err; > +} > + > +static void mmc_blk_rw_recovery(struct mmc_queue *mq, struct request *req) > +{ > + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_blk_request *brq = &mqrq->brq; > + struct mmc_blk_data *md = mq->blkdata; > + struct mmc_card *card = mq->card; > + u32 status; > + u32 blocks; > + int err; > + > + /* > + * Status error bits might get lost during re-tuning so don't allow > + * re-tuning yet. > + */ > + mmc_retune_hold_now(card->host); > + > + /* > + * Some errors the host driver might not have seen. Set the number of > + * bytes transferred to zero in that case. > + */ > + err = __mmc_send_status(card, &status, 0); > + if (err || mmc_blk_status_error(req, status)) > + brq->data.bytes_xfered = 0; > + > + mmc_retune_release(card->host); > + > + /* > + * Try again to get the status. This also provides an opportunity for > + * re-tuning. > + */ > + if (err) > + err = __mmc_send_status(card, &status, 0); > + > + /* > + * Nothing more to do after the number of bytes transferred has been > + * updated and there is no card. > + */ > + if (err && mmc_detect_card_removed(card->host)) > + return; > + > + /* Try to get back to "tran" state */ > + if (err || !mmc_blk_in_tran_state(status)) > + err = mmc_blk_fix_state(mq->card, req); > + > + /* > + * Special case for SD cards where the card might record the number of > + * blocks written. > + */ > + if (!err && mmc_blk_cmd_started(brq) && mmc_card_sd(card) && > + rq_data_dir(req) == WRITE && !mmc_sd_num_wr_blocks(card, &blocks)) > + brq->data.bytes_xfered = blocks << 9; > + > + /* Reset if the card is in a bad state */ > + if (err && mmc_blk_reset(md, card->host, type)) { > + pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); > + mqrq->retries = MMC_NO_RETRIES; > + return; > + } > + > + /* > + * If anything was done, just return and if there is anything remaining > + * on the request it will get requeued. > + */ > + if (brq->data.bytes_xfered) > + return; > + > + /* Reset before last retry */ > + if (mqrq->retries + 1 == MMC_MAX_RETRIES) > + mmc_blk_reset(md, card->host, type); > + > + /* Command errors fail fast, so use all MMC_MAX_RETRIES */ > + if (brq->sbc.error || brq->cmd.error) > + return; > + > + /* Reduce the remaining retries for data errors */ > + if (mqrq->retries < MMC_MAX_RETRIES - MMC_DATA_RETRIES) { > + mqrq->retries = MMC_MAX_RETRIES - MMC_DATA_RETRIES; > + return; > + } > + > + /* FIXME: Missing single sector read for large sector size */ > + if (rq_data_dir(req) == READ && !mmc_large_sector(card)) { > + /* Read one sector at a time */ > + mmc_blk_ss_read(mq, req); > + return; > + } > +} > + > +static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq) > +{ > + mmc_blk_eval_resp_error(brq); > + > + return brq->sbc.error || brq->cmd.error || brq->stop.error || > + brq->data.error || brq->cmd.resp[0] & CMD_ERRORS; > +} > + > +static int mmc_blk_card_busy(struct mmc_card *card, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + u32 status = 0; > + int err; > + > + if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ) > + return 0; > + > + mmc_retune_hold_now(card->host); > + > + err = mmc_blk_card_stuck(card, req, &status); > + > + mmc_retune_release(card->host); > + > + /* > + * Do not assume data transferred correctly if there are any error bits > + * set. > + */ > + if (!err && status & mmc_blk_stop_err_bits(&mqrq->brq)) { > + mqrq->brq.data.bytes_xfered = 0; > + err = -EIO; > + } > + > + /* Copy the exception bit so it will be seen later on */ > + if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT) > + mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT; > + > + return err; > +} > + > +static inline void mmc_blk_rw_reset_success(struct mmc_queue *mq, > + struct request *req) > +{ > + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; > + > + mmc_blk_reset_success(mq->blkdata, type); > +} > + > +static void mmc_blk_mq_complete_rq(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + unsigned int nr_bytes = mqrq->brq.data.bytes_xfered; > + > + if (nr_bytes) { > + if (blk_update_request(req, BLK_STS_OK, nr_bytes)) > + blk_mq_requeue_request(req, true); > + else > + __blk_mq_end_request(req, BLK_STS_OK); > + } else if (mqrq->retries++ < MMC_MAX_RETRIES) { > + blk_mq_requeue_request(req, true); > + } else { > + if (mmc_card_removed(mq->card)) > + req->rq_flags |= RQF_QUIET; > + blk_mq_end_request(req, BLK_STS_IOERR); > + } > +} > + > +static bool mmc_blk_urgent_bkops_needed(struct mmc_queue *mq, > + struct mmc_queue_req *mqrq) > +{ > + return mmc_card_mmc(mq->card) && > + (mqrq->brq.cmd.resp[0] & R1_EXCEPTION_EVENT || > + mqrq->brq.stop.resp[0] & R1_EXCEPTION_EVENT); > +} > + > +static void mmc_blk_urgent_bkops(struct mmc_queue *mq, > + struct mmc_queue_req *mqrq) > +{ > + if (mmc_blk_urgent_bkops_needed(mq, mqrq)) > + mmc_start_bkops(mq->card, true); > +} > + > +static int mmc_blk_card_busy_check(struct mmc_queue *mq, struct request *req) > +{ > + if (mmc_queue_rw_async(mq->card->host)) > + return 0; > + > + return mmc_blk_card_busy(mq->card, req); > +} > + > +void mmc_blk_mq_complete(struct request *req) > +{ > + struct mmc_queue *mq = req->q->queuedata; > + > + if (mq->use_cqe) > + mmc_blk_cqe_complete_rq(mq, req); > + else > + mmc_blk_mq_complete_rq(mq, req); > +} > + > +static void mmc_blk_finish_rw_rq_blocking(struct mmc_queue *mq, > + struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + > + if (mmc_blk_rq_error(&mqrq->brq) || mmc_blk_card_busy_check(mq, req)) > + mmc_blk_rw_recovery(mq, req); > + else > + mmc_blk_rw_reset_success(mq, req); > + > + mmc_blk_urgent_bkops(mq, mqrq); > + > + mq->rw_wait = false; > + > + /* > + * Block layer timeouts race with completions which means the normal > + * completion path cannot be used during recovery. > + */ > + if (mq->in_recovery) > + mmc_blk_mq_complete_rq(mq, req); > + else > + blk_mq_complete_request(req); > +} > + > +void mmc_blk_mq_recovery(struct mmc_queue *mq) > +{ > + struct request *req = mq->recovery_req; > + > + mq->recovery_req = NULL; > + > + mmc_blk_finish_rw_rq_blocking(mq, req); > +} > + > +static void mmc_blk_issue_rw_rq_blocking(struct mmc_queue *mq, > + struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + > + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); > + > + mmc_wait_for_req(mq->card->host, &mqrq->brq.mrq); > + > + mmc_blk_finish_rw_rq_blocking(mq, req); > +} > + > +static void mmc_blk_mq_req_done(struct mmc_request *mrq) > +{ > + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, > + brq.mrq); > + struct request *req = mmc_queue_req_to_req(mqrq); > + struct request_queue *q = req->q; > + struct mmc_queue *mq = q->queuedata; > + struct mmc_host *host = mq->card->host; > + unsigned long flags; > + bool put_card; > + > + if (mmc_blk_rq_error(&mqrq->brq) || > + mmc_blk_urgent_bkops_needed(mq, mqrq)) { > + if (host->ops->post_req) > + host->ops->post_req(host, mrq, 0); > + mq->recovery_needed = true; > + mq->recovery_req = req; > + wake_up(&mq->wait); > + schedule_work(&mq->recovery_work); > + return; > + } > + > + mmc_blk_rw_reset_success(mq, req); > + > + mq->rw_wait = false; > + wake_up(&mq->wait); > + > + if (host->ops->post_req) > + host->ops->post_req(host, mrq, 0); > + > + blk_mq_complete_request(req); > + > + spin_lock_irqsave(q->queue_lock, flags); > + > + mq->in_flight[mmc_issue_type(mq, req)] -= 1; > + > + put_card = mmc_tot_in_flight(mq) == 0; > + > + spin_unlock_irqrestore(q->queue_lock, flags); > + > + if (put_card) > + mmc_put_card(mq->card, &mq->ctx); > +} > + > +static bool mmc_blk_rw_wait_cond(struct mmc_queue *mq, int *err) > +{ > + if (mq->recovery_needed) { > + *err = -EBUSY; > + return true; > + } > + > + return !mq->rw_wait; > +} > + > +static int mmc_blk_rw_wait(struct mmc_queue *mq) > +{ > + int err = 0; > + > + wait_event(mq->wait, mmc_blk_rw_wait_cond(mq, &err)); > + > + return err; > +} > + > +static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq, > + struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_host *host = mq->card->host; > + int err = 0; > + > + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); > + > + mqrq->brq.mrq.done = mmc_blk_mq_req_done; > + > + if (host->ops->pre_req) > + host->ops->pre_req(host, &mqrq->brq.mrq); > + > + err = mmc_blk_rw_wait(mq); > + if (err) > + goto out_post_req; > + > + mq->rw_wait = true; > + > + err = mmc_start_request(host, &mqrq->brq.mrq); > + > + if (err) > + mq->rw_wait = false; > + > + /* Release re-tuning here where there is no synchronization required */ > + mmc_retune_release(host); > + > +out_post_req: > + if (err && host->ops->post_req) > + host->ops->post_req(host, &mqrq->brq.mrq, err); > + > + return err; > +} > + > +static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host) > +{ > + if (mq->use_cqe) > + return host->cqe_ops->cqe_wait_for_idle(host); > + > + if (mmc_queue_rw_async(host)) > + return mmc_blk_rw_wait(mq); > + > + return 0; > +} > + > +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_blk_data *md = mq->blkdata; > + struct mmc_card *card = md->queue.card; > + struct mmc_host *host = card->host; > + int ret; > + > + ret = mmc_blk_part_switch(card, md->part_type); > + if (ret) > + return MMC_REQ_FAILED_TO_START; > + > + switch (mmc_issue_type(mq, req)) { > + case MMC_ISSUE_SYNC: > + ret = mmc_blk_wait_for_idle(mq, host); > + if (ret) > + return MMC_REQ_BUSY; > + switch (req_op(req)) { > + case REQ_OP_DISCARD: > + mmc_blk_issue_discard_rq(mq, req); > + break; > + case REQ_OP_SECURE_ERASE: > + mmc_blk_issue_secdiscard_rq(mq, req); > + break; > + case REQ_OP_FLUSH: > + mmc_blk_issue_flush(mq, req); > + break; > + case REQ_OP_READ: > + case REQ_OP_WRITE: > + mmc_blk_issue_rw_rq_blocking(mq, req); > + break; > + default: > + WARN_ON_ONCE(1); > + return MMC_REQ_FAILED_TO_START; > + } > + return MMC_REQ_FINISHED; > + case MMC_ISSUE_DCMD: > + case MMC_ISSUE_ASYNC: > + switch (req_op(req)) { > + case REQ_OP_FLUSH: > + ret = mmc_blk_cqe_issue_flush(mq, req); > + break; > + case REQ_OP_READ: > + case REQ_OP_WRITE: > + if (mq->use_cqe) > + ret = mmc_blk_cqe_issue_rw_rq(mq, req); > + else > + ret = mmc_blk_mq_issue_rw_rq(mq, req); > + break; > + default: > + WARN_ON_ONCE(1); > + ret = -EINVAL; > + } > + if (!ret) > + return MMC_REQ_STARTED; > + return ret == -EBUSY ? MMC_REQ_BUSY : MMC_REQ_FAILED_TO_START; > + default: > + WARN_ON_ONCE(1); > + return MMC_REQ_FAILED_TO_START; > + } > +} > + > static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card, > struct mmc_blk_request *brq, struct request *req, > bool old_req_pending) > @@ -2133,7 +2851,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, > INIT_LIST_HEAD(&md->rpmbs); > md->usage = 1; > > - ret = mmc_init_queue(&md->queue, card, &md->lock, subname); > + ret = mmc_init_queue(&md->queue, card, &md->lock, subname, area_type); > if (ret) > goto err_putdisk; > > diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h > index 860ca7c8df86..742aa4d27cbf 100644 > --- a/drivers/mmc/core/block.h > +++ b/drivers/mmc/core/block.h > @@ -6,4 +6,12 @@ > > void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req); > > +enum mmc_issued; > + > +void mmc_blk_cqe_recovery(struct mmc_queue *mq); > + > +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req); > +void mmc_blk_mq_complete(struct request *req); > +void mmc_blk_mq_recovery(struct mmc_queue *mq); > + > #endif > diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c > index 4f33d277b125..9d7ec3b3f9a9 100644 > --- a/drivers/mmc/core/queue.c > +++ b/drivers/mmc/core/queue.c > @@ -22,6 +22,7 @@ > #include "block.h" > #include "core.h" > #include "card.h" > +#include "host.h" > > /* > * Prepare a MMC request. This just filters out odd stuff. > @@ -34,10 +35,153 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) > return BLKPREP_KILL; > > req->rq_flags |= RQF_DONTPREP; > + req_to_mmc_queue_req(req)->retries = 0; > > return BLKPREP_OK; > } > > +static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq) > +{ > + /* Allow only 1 DCMD at a time */ > + return mq->in_flight[MMC_ISSUE_DCMD]; > +} > + > +void mmc_cqe_check_busy(struct mmc_queue *mq) > +{ > + if ((mq->cqe_busy & MMC_CQE_DCMD_BUSY) && !mmc_cqe_dcmd_busy(mq)) > + mq->cqe_busy &= ~MMC_CQE_DCMD_BUSY; > + > + mq->cqe_busy &= ~MMC_CQE_QUEUE_FULL; > +} > + > +static inline bool mmc_cqe_can_dcmd(struct mmc_host *host) > +{ > + return host->caps2 & MMC_CAP2_CQE_DCMD; > +} > + > +enum mmc_issue_type mmc_cqe_issue_type(struct mmc_host *host, > + struct request *req) > +{ > + switch (req_op(req)) { > + case REQ_OP_DRV_IN: > + case REQ_OP_DRV_OUT: > + case REQ_OP_DISCARD: > + case REQ_OP_SECURE_ERASE: > + return MMC_ISSUE_SYNC; > + case REQ_OP_FLUSH: > + return mmc_cqe_can_dcmd(host) ? MMC_ISSUE_DCMD : MMC_ISSUE_SYNC; > + default: > + return MMC_ISSUE_ASYNC; > + } > +} > + > +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req) > +{ > + struct mmc_host *host = mq->card->host; > + > + if (mq->use_cqe) > + return mmc_cqe_issue_type(host, req); > + > + if (mmc_queue_rw_async(host) && > + (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE)) > + return MMC_ISSUE_ASYNC; > + > + return MMC_ISSUE_SYNC; > +} > + > +static void __mmc_cqe_recovery_notifier(struct mmc_queue *mq) > +{ > + if (!mq->recovery_needed) { > + mq->recovery_needed = true; > + schedule_work(&mq->recovery_work); > + } > +} > + > +void mmc_cqe_recovery_notifier(struct mmc_request *mrq) > +{ > + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, > + brq.mrq); > + struct request *req = mmc_queue_req_to_req(mqrq); > + struct request_queue *q = req->q; > + struct mmc_queue *mq = q->queuedata; > + unsigned long flags; > + > + spin_lock_irqsave(q->queue_lock, flags); > + __mmc_cqe_recovery_notifier(mq); > + spin_unlock_irqrestore(q->queue_lock, flags); > +} > + > +static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req) > +{ > + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); > + struct mmc_request *mrq = &mqrq->brq.mrq; > + struct mmc_queue *mq = req->q->queuedata; > + struct mmc_host *host = mq->card->host; > + enum mmc_issue_type issue_type = mmc_issue_type(mq, req); > + bool recovery_needed = false; > + > + switch (issue_type) { > + case MMC_ISSUE_ASYNC: > + case MMC_ISSUE_DCMD: > + if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) { > + if (recovery_needed) > + __mmc_cqe_recovery_notifier(mq); > + return BLK_EH_RESET_TIMER; > + } > + /* No timeout */ > + return BLK_EH_HANDLED; > + default: > + /* Timeout is handled by mmc core */ > + return BLK_EH_RESET_TIMER; > + } > +} > + > +static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req, > + bool reserved) > +{ > + struct request_queue *q = req->q; > + struct mmc_queue *mq = q->queuedata; > + unsigned long flags; > + int ret; > + > + spin_lock_irqsave(q->queue_lock, flags); > + > + if (mq->recovery_needed || !mq->use_cqe) > + ret = BLK_EH_RESET_TIMER; > + else > + ret = mmc_cqe_timed_out(req); > + > + spin_unlock_irqrestore(q->queue_lock, flags); > + > + return ret; > +} > + > +static void mmc_mq_recovery_handler(struct work_struct *work) > +{ > + struct mmc_queue *mq = container_of(work, struct mmc_queue, > + recovery_work); > + struct request_queue *q = mq->queue; > + > + mmc_get_card(mq->card, &mq->ctx); > + > + mq->in_recovery = true; > + > + if (mq->use_cqe) > + mmc_blk_cqe_recovery(mq); > + else > + mmc_blk_mq_recovery(mq); > + > + mq->in_recovery = false; > + > + spin_lock_irq(q->queue_lock); > + mq->recovery_needed = false; > + spin_unlock_irq(q->queue_lock); > + > + mmc_put_card(mq->card, &mq->ctx); > + > + blk_mq_run_hw_queues(q, true); > +} > + > static int mmc_queue_thread(void *d) > { > struct mmc_queue *mq = d; > @@ -154,11 +298,10 @@ static void mmc_queue_setup_discard(struct request_queue *q, > * @req: the request > * @gfp: memory allocation policy > */ > -static int mmc_init_request(struct request_queue *q, struct request *req, > - gfp_t gfp) > +static int __mmc_init_request(struct mmc_queue *mq, struct request *req, > + gfp_t gfp) > { > struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); > - struct mmc_queue *mq = q->queuedata; > struct mmc_card *card = mq->card; > struct mmc_host *host = card->host; > > @@ -169,6 +312,12 @@ static int mmc_init_request(struct request_queue *q, struct request *req, > return 0; > } > > +static int mmc_init_request(struct request_queue *q, struct request *req, > + gfp_t gfp) > +{ > + return __mmc_init_request(q->queuedata, req, gfp); > +} > + > static void mmc_exit_request(struct request_queue *q, struct request *req) > { > struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); > @@ -177,6 +326,124 @@ static void mmc_exit_request(struct request_queue *q, struct request *req) > mq_rq->sg = NULL; > } > > +static int mmc_mq_init_request(struct blk_mq_tag_set *set, struct request *req, > + unsigned int hctx_idx, unsigned int numa_node) > +{ > + return __mmc_init_request(set->driver_data, req, GFP_KERNEL); > +} > + > +static void mmc_mq_exit_request(struct blk_mq_tag_set *set, struct request *req, > + unsigned int hctx_idx) > +{ > + struct mmc_queue *mq = set->driver_data; > + > + mmc_exit_request(mq->queue, req); > +} > + > +static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, > + const struct blk_mq_queue_data *bd) > +{ > + struct request *req = bd->rq; > + struct request_queue *q = req->q; > + struct mmc_queue *mq = q->queuedata; > + struct mmc_card *card = mq->card; > + struct mmc_host *host = card->host; > + enum mmc_issue_type issue_type; > + enum mmc_issued issued; > + bool get_card, cqe_retune_ok; > + int ret; > + > + if (mmc_card_removed(mq->card)) { > + req->rq_flags |= RQF_QUIET; > + return BLK_STS_IOERR; > + } > + > + issue_type = mmc_issue_type(mq, req); > + > + spin_lock_irq(q->queue_lock); > + > + if (mq->recovery_needed) { > + spin_unlock_irq(q->queue_lock); > + return BLK_STS_RESOURCE; > + } > + > + switch (issue_type) { > + case MMC_ISSUE_DCMD: > + if (mmc_cqe_dcmd_busy(mq)) { > + mq->cqe_busy |= MMC_CQE_DCMD_BUSY; > + spin_unlock_irq(q->queue_lock); > + return BLK_STS_RESOURCE; > + } > + break; > + case MMC_ISSUE_ASYNC: > + break; > + default: > + /* > + * Timeouts are handled by mmc core, so set a large value to > + * avoid races. > + */ > + req->timeout = 600 * HZ; > + break; > + } > + > + mq->in_flight[issue_type] += 1; > + get_card = mmc_tot_in_flight(mq) == 1; > + cqe_retune_ok = mmc_cqe_qcnt(mq) == 1; > + > + spin_unlock_irq(q->queue_lock); > + > + if (!(req->rq_flags & RQF_DONTPREP)) { > + req_to_mmc_queue_req(req)->retries = 0; > + req->rq_flags |= RQF_DONTPREP; > + } > + > + if (get_card) > + mmc_get_card(card, &mq->ctx); > + > + if (mq->use_cqe) { > + host->retune_now = host->need_retune && cqe_retune_ok && > + !host->hold_retune; > + } > + > + blk_mq_start_request(req); > + > + issued = mmc_blk_mq_issue_rq(mq, req); > + > + switch (issued) { > + case MMC_REQ_BUSY: > + ret = BLK_STS_RESOURCE; > + break; > + case MMC_REQ_FAILED_TO_START: > + ret = BLK_STS_IOERR; > + break; > + default: > + ret = BLK_STS_OK; > + break; > + } > + > + if (issued != MMC_REQ_STARTED) { > + bool put_card = false; > + > + spin_lock_irq(q->queue_lock); > + mq->in_flight[issue_type] -= 1; > + if (mmc_tot_in_flight(mq) == 0) > + put_card = true; > + spin_unlock_irq(q->queue_lock); > + if (put_card) > + mmc_put_card(card, &mq->ctx); > + } > + > + return ret; > +} > + > +static const struct blk_mq_ops mmc_mq_cqe_ops = { > + .queue_rq = mmc_mq_queue_rq, > + .init_request = mmc_mq_init_request, > + .exit_request = mmc_mq_exit_request, > + .complete = mmc_blk_mq_complete, > + .timeout = mmc_mq_timed_out, > +}; > + > static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) > { > struct mmc_host *host = card->host; > @@ -198,6 +465,72 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) > > /* Initialize thread_sem even if it is not used */ > sema_init(&mq->thread_sem, 1); > + > + /* Initialize recovery_work even if it is not used */ > + INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler); > + > + init_waitqueue_head(&mq->wait); > +} > + > +static int mmc_mq_init_queue(struct mmc_queue *mq, int q_depth, > + const struct blk_mq_ops *mq_ops, spinlock_t *lock) > +{ > + int ret; > + > + memset(&mq->tag_set, 0, sizeof(mq->tag_set)); > + mq->tag_set.ops = mq_ops; > + mq->tag_set.queue_depth = q_depth; > + mq->tag_set.numa_node = NUMA_NO_NODE; > + mq->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE | > + BLK_MQ_F_BLOCKING; > + mq->tag_set.nr_hw_queues = 1; > + mq->tag_set.cmd_size = sizeof(struct mmc_queue_req); > + mq->tag_set.driver_data = mq; > + > + ret = blk_mq_alloc_tag_set(&mq->tag_set); > + if (ret) > + return ret; > + > + mq->queue = blk_mq_init_queue(&mq->tag_set); > + if (IS_ERR(mq->queue)) { > + ret = PTR_ERR(mq->queue); > + goto free_tag_set; > + } > + > + mq->queue->queue_lock = lock; > + mq->queue->queuedata = mq; > + > + return 0; > + > +free_tag_set: > + blk_mq_free_tag_set(&mq->tag_set); > + > + return ret; > +} > + > +#define MMC_QUEUE_DEPTH 64 > + > +static int mmc_mq_init(struct mmc_queue *mq, struct mmc_card *card, > + spinlock_t *lock) > +{ > + struct mmc_host *host = card->host; > + int q_depth; > + int ret; > + > + if (mq->use_cqe) > + q_depth = min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth); > + else > + q_depth = MMC_QUEUE_DEPTH; > + > + ret = mmc_mq_init_queue(mq, q_depth, &mmc_mq_cqe_ops, lock); > + if (ret) > + return ret; > + > + blk_queue_rq_timeout(mq->queue, 60 * HZ); > + > + mmc_setup_queue(mq, card); > + > + return 0; > } > > /** > @@ -210,12 +543,18 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) > * Initialise a MMC card request queue. > */ > int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, > - spinlock_t *lock, const char *subname) > + spinlock_t *lock, const char *subname, int area_type) > { > struct mmc_host *host = card->host; > int ret = -ENOMEM; > > mq->card = card; > + > + mq->use_cqe = host->cqe_enabled && area_type != MMC_BLK_DATA_AREA_RPMB; > + > + if (mq->use_cqe || mmc_host_use_blk_mq(host)) > + return mmc_mq_init(mq, card, lock); > + > mq->queue = blk_alloc_queue(GFP_KERNEL); > if (!mq->queue) > return -ENOMEM; > @@ -251,11 +590,63 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, > return ret; > } > > +static void mmc_mq_queue_suspend(struct mmc_queue *mq) > +{ > + blk_mq_quiesce_queue(mq->queue); > + > + /* > + * The host remains claimed while there are outstanding requests, so > + * simply claiming and releasing here ensures there are none. > + */ > + mmc_claim_host(mq->card->host); > + mmc_release_host(mq->card->host); > +} > + > +static void mmc_mq_queue_resume(struct mmc_queue *mq) > +{ > + blk_mq_unquiesce_queue(mq->queue); > +} > + > +static void __mmc_queue_suspend(struct mmc_queue *mq) > +{ > + struct request_queue *q = mq->queue; > + unsigned long flags; > + > + if (!mq->suspended) { > + mq->suspended |= true; > + > + spin_lock_irqsave(q->queue_lock, flags); > + blk_stop_queue(q); > + spin_unlock_irqrestore(q->queue_lock, flags); > + > + down(&mq->thread_sem); > + } > +} > + > +static void __mmc_queue_resume(struct mmc_queue *mq) > +{ > + struct request_queue *q = mq->queue; > + unsigned long flags; > + > + if (mq->suspended) { > + mq->suspended = false; > + > + up(&mq->thread_sem); > + > + spin_lock_irqsave(q->queue_lock, flags); > + blk_start_queue(q); > + spin_unlock_irqrestore(q->queue_lock, flags); > + } > +} > + > void mmc_cleanup_queue(struct mmc_queue *mq) > { > struct request_queue *q = mq->queue; > unsigned long flags; > > + if (q->mq_ops) > + return; > + > /* Make sure the queue isn't suspended, as that will deadlock */ > mmc_queue_resume(mq); > > @@ -283,17 +674,11 @@ void mmc_cleanup_queue(struct mmc_queue *mq) > void mmc_queue_suspend(struct mmc_queue *mq) > { > struct request_queue *q = mq->queue; > - unsigned long flags; > - > - if (!mq->suspended) { > - mq->suspended |= true; > - > - spin_lock_irqsave(q->queue_lock, flags); > - blk_stop_queue(q); > - spin_unlock_irqrestore(q->queue_lock, flags); > > - down(&mq->thread_sem); > - } > + if (q->mq_ops) > + mmc_mq_queue_suspend(mq); > + else > + __mmc_queue_suspend(mq); > } > > /** > @@ -303,17 +688,11 @@ void mmc_queue_suspend(struct mmc_queue *mq) > void mmc_queue_resume(struct mmc_queue *mq) > { > struct request_queue *q = mq->queue; > - unsigned long flags; > - > - if (mq->suspended) { > - mq->suspended = false; > > - up(&mq->thread_sem); > - > - spin_lock_irqsave(q->queue_lock, flags); > - blk_start_queue(q); > - spin_unlock_irqrestore(q->queue_lock, flags); > - } > + if (q->mq_ops) > + mmc_mq_queue_resume(mq); > + else > + __mmc_queue_resume(mq); > } > > /* > diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h > index 68f68ecd94ea..792ff5f94731 100644 > --- a/drivers/mmc/core/queue.h > +++ b/drivers/mmc/core/queue.h > @@ -7,6 +7,20 @@ > #include <linux/mmc/core.h> > #include <linux/mmc/host.h> > > +enum mmc_issued { > + MMC_REQ_STARTED, > + MMC_REQ_BUSY, > + MMC_REQ_FAILED_TO_START, > + MMC_REQ_FINISHED, > +}; > + > +enum mmc_issue_type { > + MMC_ISSUE_SYNC, > + MMC_ISSUE_DCMD, > + MMC_ISSUE_ASYNC, > + MMC_ISSUE_MAX, > +}; > + > static inline struct mmc_queue_req *req_to_mmc_queue_req(struct request *rq) > { > return blk_mq_rq_to_pdu(rq); > @@ -56,12 +70,15 @@ struct mmc_queue_req { > int drv_op_result; > void *drv_op_data; > unsigned int ioc_count; > + int retries; > }; > > struct mmc_queue { > struct mmc_card *card; > struct task_struct *thread; > struct semaphore thread_sem; > + struct mmc_ctx ctx; > + struct blk_mq_tag_set tag_set; > bool suspended; > bool asleep; > struct mmc_blk_data *blkdata; > @@ -73,14 +90,49 @@ struct mmc_queue { > * associated mmc_queue_req data. > */ > int qcnt; > + > + int in_flight[MMC_ISSUE_MAX]; > + unsigned int cqe_busy; > +#define MMC_CQE_DCMD_BUSY BIT(0) > +#define MMC_CQE_QUEUE_FULL BIT(1) > + bool use_cqe; > + bool recovery_needed; > + bool in_recovery; > + bool rw_wait; > + struct work_struct recovery_work; > + wait_queue_head_t wait; > + struct request *recovery_req; > }; > > extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, > - const char *); > + const char *, int); > extern void mmc_cleanup_queue(struct mmc_queue *); > extern void mmc_queue_suspend(struct mmc_queue *); > extern void mmc_queue_resume(struct mmc_queue *); > extern unsigned int mmc_queue_map_sg(struct mmc_queue *, > struct mmc_queue_req *); > > +void mmc_cqe_check_busy(struct mmc_queue *mq); > +void mmc_cqe_recovery_notifier(struct mmc_request *mrq); > + > +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req); > + > +static inline int mmc_tot_in_flight(struct mmc_queue *mq) > +{ > + return mq->in_flight[MMC_ISSUE_SYNC] + > + mq->in_flight[MMC_ISSUE_DCMD] + > + mq->in_flight[MMC_ISSUE_ASYNC]; > +} > + > +static inline int mmc_cqe_qcnt(struct mmc_queue *mq) > +{ > + return mq->in_flight[MMC_ISSUE_DCMD] + > + mq->in_flight[MMC_ISSUE_ASYNC]; > +} > + > +static inline bool mmc_queue_rw_async(struct mmc_host *host) > +{ > + return host->caps & MMC_CAP_WAIT_WHILE_BUSY; > +} > + > #endif > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> wrote: > Add CQE support to the block driver, including: > - optionally using DCMD for flush requests > - "manually" issuing discard requests > - issuing read / write requests to the CQE > - supporting block-layer timeouts > - handling recovery > - supporting re-tuning > > CQE offers 25% - 50% better random multi-threaded I/O. There is a slight > (e.g. 2%) drop in sequential read speed but no observable change to sequential > write. > > CQE automatically sends the commands to complete requests. However it only > supports reads / writes and so-called "direct commands" (DCMD). Furthermore > DCMD is limited to one command at a time, but discards require 3 commands. > That makes issuing discards through CQE very awkward, but some CQE's don't > support DCMD anyway. So for discards, the existing non-CQE approach is > taken, where the mmc core code issues the 3 commands one at a time i.e. > mmc_erase(). Where DCMD is used, is for issuing flushes. > > For host controllers without CQE support, blk-mq support is extended to > synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, > asynchonous reads/writes. The advantage of asynchronous reads/writes is > that it allows the preparation of the next request while the current > request is in progress. > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> I am trying to wrap my head around this large patch. The size makes it hard but I am doing my best. Some overarching questions: - Is the CQE only available on the MQ path (i.e. if you enabled MQ) or on both paths? I think it is reasonable that if we introduce a new feature like this it will only be available for the new block path. This reflects how the block maintainers e.g. only allow new scheduling policies to be merged on the MQ path. The old block layer is legacy and should not be extended with new cool features that can then be regarded as "regressions" if they don't work properly with MQ. Better to only implement them for MQ then. - Performance before/after path on MQ? I tested this very extensively when working with my (now dormant) MQ patch set. Better/equal/worse? (https://marc.info/?l=linux-mmc&m=148665788227015&w=2) The reason my patch set contained refactorings of async post-processing, removed the waitqueues and the context info, up to the point where I can issue requests in parallel, i.e. complete requests from the ->done() callback on the host and immediately let the core issue the next one, was due to performance issues. It's these patches from the old patch set: mmc: core: move some code in mmc_start_areq() mmc: core: refactor asynchronous request finalization mmc: core: refactor mmc_request_done() mmc: core: move the asynchronous post-processing mmc: core: add a kthread for completing requests mmc: core: replace waitqueue with worker mmc: core: do away with is_done_rcv mmc: core: do away with is_new_req mmc: core: kill off the context info mmc: queue: simplify queue logic mmc: block: shuffle retry and error handling mmc: queue: stop flushing the pipeline with NULL mmc: queue: issue struct mmc_queue_req items mmc: queue: get/put struct mmc_queue_req mmc: queue: issue requests in massive parallel I.e. I made 15 patches just to make sure the new block layer did not regress performance. The MQ-switch patch was just the final step of these 16 patches. Most energy went into that and I think it will be necessary still to work with MQ in the long haul. I am worried that this could add a second MQ execution path that performs worse than the legacy block path for the above reason, i.e. it doesn't really take advantage of the MQ speedups by marshalling the requests and not doing away with the waitqueues and not completing the requests out-of-order, so we get stuck with a lump of MQ code that doesn't perform and therefore we cannot switch seamlessly to MQ. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday, October 04, 2017 09:39:45 AM Linus Walleij wrote: > On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> wrote: > > > Add CQE support to the block driver, including: > > - optionally using DCMD for flush requests > > - "manually" issuing discard requests > > - issuing read / write requests to the CQE > > - supporting block-layer timeouts > > - handling recovery > > - supporting re-tuning > > > > CQE offers 25% - 50% better random multi-threaded I/O. There is a slight > > (e.g. 2%) drop in sequential read speed but no observable change to sequential > > write. > > > > CQE automatically sends the commands to complete requests. However it only > > supports reads / writes and so-called "direct commands" (DCMD). Furthermore > > DCMD is limited to one command at a time, but discards require 3 commands. > > That makes issuing discards through CQE very awkward, but some CQE's don't > > support DCMD anyway. So for discards, the existing non-CQE approach is > > taken, where the mmc core code issues the 3 commands one at a time i.e. > > mmc_erase(). Where DCMD is used, is for issuing flushes. > > > > For host controllers without CQE support, blk-mq support is extended to > > synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, > > asynchonous reads/writes. The advantage of asynchronous reads/writes is > > that it allows the preparation of the next request while the current > > request is in progress. > > > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > > I am trying to wrap my head around this large patch. The size makes it hard > but I am doing my best. I also think that this patch should be split on two patches. The 1st one introducing blk-mq and the 2nd one adding CQE support. [ I don't agree that they make more sense together, on the contrary, it is very difficult to properly analyze blk-mq changes on their own while there are mixed with CQE related ones. ] > Some overarching questions: > > - Is the CQE only available on the MQ path (i.e. if you enabled MQ) or > on both paths? > > I think it is reasonable that if we introduce a new feature like this > it will only > be available for the new block path. This reflects how the block maintainers > e.g. only allow new scheduling policies to be merged on the MQ path. > The old block layer is legacy and should not be extended with new cool > features that can then be regarded as "regressions" if they don't work > properly with MQ. Better to only implement them for MQ then. > > - Performance before/after path on MQ? > > I tested this very extensively when working with my (now dormant) MQ > patch set. Better/equal/worse? > (https://marc.info/?l=linux-mmc&m=148665788227015&w=2) > > The reason my patch set contained refactorings of async post-processing, > removed the waitqueues and the context info, up to the point where I > can issue requests in parallel, i.e. complete requests from the ->done() > callback on the host and immediately let the core issue the next one, > was due to performance issues. > > It's these patches from the old patch set: > > mmc: core: move some code in mmc_start_areq() > mmc: core: refactor asynchronous request finalization > mmc: core: refactor mmc_request_done() > mmc: core: move the asynchronous post-processing > mmc: core: add a kthread for completing requests > mmc: core: replace waitqueue with worker > mmc: core: do away with is_done_rcv > mmc: core: do away with is_new_req > mmc: core: kill off the context info > mmc: queue: simplify queue logic > mmc: block: shuffle retry and error handling > mmc: queue: stop flushing the pipeline with NULL > mmc: queue: issue struct mmc_queue_req items > mmc: queue: get/put struct mmc_queue_req > mmc: queue: issue requests in massive parallel > > I.e. I made 15 patches just to make sure the new block layer did not > regress performance. The MQ-switch patch was just the final step of > these 16 patches. > > Most energy went into that and I think it will be necessary still to work > with MQ in the long haul. > > I am worried that this could add a second MQ execution path that > performs worse than the legacy block path for the above reason, i.e. > it doesn't really take advantage of the MQ speedups by marshalling > the requests and not doing away with the waitqueues and not > completing the requests out-of-order, so we get stuck with a lump of BTW The out-of-order approach taken by the above patchset seems racy (at least when it comes to error handling), the details were in my review mails which have not been answered yet: https://www.spinics.net/lists/linux-mmc/msg42751.html Also the patchset itself has never worked on my setup: https://www.spinics.net/lists/linux-mmc/msg42759.html > MQ code that doesn't perform and therefore we cannot switch seamlessly > to MQ. I think that switching seamlessly to blk-mq in short/medium-term is not possible (SCSI tried and failed to do so). The changes to the old path are very complex and besides affecting performance they also affect error recovery handling (which needs to be tested properly before the switch). Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[...] >> MQ code that doesn't perform and therefore we cannot switch seamlessly >> to MQ. > > I think that switching seamlessly to blk-mq in short/medium-term > is not possible (SCSI tried and failed to do so). The changes to > the old path are very complex and besides affecting performance > they also affect error recovery handling (which needs to be tested > properly before the switch). Agreed, and that's why I have queued up the new Kconfig option for enabling the blkmq path from MMC. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/10/17 10:39, Linus Walleij wrote: > On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> wrote: > >> Add CQE support to the block driver, including: >> - optionally using DCMD for flush requests >> - "manually" issuing discard requests >> - issuing read / write requests to the CQE >> - supporting block-layer timeouts >> - handling recovery >> - supporting re-tuning >> >> CQE offers 25% - 50% better random multi-threaded I/O. There is a slight >> (e.g. 2%) drop in sequential read speed but no observable change to sequential >> write. >> >> CQE automatically sends the commands to complete requests. However it only >> supports reads / writes and so-called "direct commands" (DCMD). Furthermore >> DCMD is limited to one command at a time, but discards require 3 commands. >> That makes issuing discards through CQE very awkward, but some CQE's don't >> support DCMD anyway. So for discards, the existing non-CQE approach is >> taken, where the mmc core code issues the 3 commands one at a time i.e. >> mmc_erase(). Where DCMD is used, is for issuing flushes. >> >> For host controllers without CQE support, blk-mq support is extended to >> synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, >> asynchonous reads/writes. The advantage of asynchronous reads/writes is >> that it allows the preparation of the next request while the current >> request is in progress. >> >> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > > I am trying to wrap my head around this large patch. The size makes it hard > but I am doing my best. > > Some overarching questions: > > - Is the CQE only available on the MQ path (i.e. if you enabled MQ) or > on both paths? Only MQ. > > I think it is reasonable that if we introduce a new feature like this > it will only > be available for the new block path. This reflects how the block maintainers > e.g. only allow new scheduling policies to be merged on the MQ path. > The old block layer is legacy and should not be extended with new cool > features that can then be regarded as "regressions" if they don't work > properly with MQ. Better to only implement them for MQ then. I don't agree that holding up features for years and years is an ideal outcome. > > - Performance before/after path on MQ? When the host controller supports asynchronous requests, it should be the same, but as I wrote on the cover message, the block layer workqueue had worse latency than a dedicated thread. It seems that is related to it being bound to a CPU. > > I tested this very extensively when working with my (now dormant) MQ > patch set. Better/equal/worse? > (https://marc.info/?l=linux-mmc&m=148665788227015&w=2) > > The reason my patch set contained refactorings of async post-processing, > removed the waitqueues and the context info, up to the point where I > can issue requests in parallel, i.e. complete requests from the ->done() > callback on the host and immediately let the core issue the next one, > was due to performance issues. Asynchronous requests are completed in the ->done() callback. It is not exactly accurate to say that requests can be issued in parallel. eMMC/SD cards can only do one thing at a time. Asynchronous requests facilitate the driver to prepare the next request without first having to wait for the previous request. > > It's these patches from the old patch set: > > mmc: core: move some code in mmc_start_areq() > mmc: core: refactor asynchronous request finalization > mmc: core: refactor mmc_request_done() > mmc: core: move the asynchronous post-processing > mmc: core: add a kthread for completing requests > mmc: core: replace waitqueue with worker > mmc: core: do away with is_done_rcv > mmc: core: do away with is_new_req > mmc: core: kill off the context info > mmc: queue: simplify queue logic > mmc: block: shuffle retry and error handling > mmc: queue: stop flushing the pipeline with NULL > mmc: queue: issue struct mmc_queue_req items > mmc: queue: get/put struct mmc_queue_req > mmc: queue: issue requests in massive parallel > > I.e. I made 15 patches just to make sure the new block layer did not > regress performance. The MQ-switch patch was just the final step of > these 16 patches. > > Most energy went into that and I think it will be necessary still to work > with MQ in the long haul. > > I am worried that this could add a second MQ execution path that > performs worse than the legacy block path for the above reason, i.e. > it doesn't really take advantage of the MQ speedups by marshalling > the requests and not doing away with the waitqueues and not > completing the requests out-of-order, so we get stuck with a lump of > MQ code that doesn't perform and therefore we cannot switch seamlessly > to MQ. The new patches have support for asynchronous requests and, consequently, the preparation of the next request before waiting for the previous request. There is no need for another execution path. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> -----Original Message----- > From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@samsung.com] > Sent: Wednesday, October 4, 2017 12:40 PM > To: Linus Walleij <linus.walleij@linaro.org> > Cc: Hunter, Adrian <adrian.hunter@intel.com>; Ulf Hansson > <ulf.hansson@linaro.org>; linux-mmc <linux-mmc@vger.kernel.org>; linux- > block <linux-block@vger.kernel.org>; linux-kernel <linux- > kernel@vger.kernel.org>; Bough Chen <haibo.chen@nxp.com>; Alex > Lemberg <alex.lemberg@sandisk.com>; Nowak, Mateusz > <mateusz.nowak@intel.com>; Yuliy Izrailov <Yuliy.Izrailov@sandisk.com>; > Jaehoon Chung <jh80.chung@samsung.com>; Dong Aisheng > <dongas86@gmail.com>; Das Asutosh <asutoshd@codeaurora.org>; > Zhangfei Gao <zhangfei.gao@gmail.com>; Sahitya Tummala > <stummala@codeaurora.org>; Harjani Ritesh <riteshh@codeaurora.org>; > Venu Byravarasu <vbyravarasu@nvidia.com>; Shawn Lin <shawn.lin@rock- > chips.com>; Christoph Hellwig <hch@lst.de> > Subject: Re: [PATCH V9 13/15] mmc: block: Add CQE and blk-mq support > > > Hi, > > On Wednesday, October 04, 2017 09:39:45 AM Linus Walleij wrote: > > On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> > wrote: > > > > > Add CQE support to the block driver, including: > > > - optionally using DCMD for flush requests > > > - "manually" issuing discard requests > > > - issuing read / write requests to the CQE > > > - supporting block-layer timeouts > > > - handling recovery > > > - supporting re-tuning > > > > > > CQE offers 25% - 50% better random multi-threaded I/O. There is a > > > slight (e.g. 2%) drop in sequential read speed but no observable > > > change to sequential write. > > > > > > CQE automatically sends the commands to complete requests. However > > > it only supports reads / writes and so-called "direct commands" > > > (DCMD). Furthermore DCMD is limited to one command at a time, but > discards require 3 commands. > > > That makes issuing discards through CQE very awkward, but some CQE's > > > don't support DCMD anyway. So for discards, the existing non-CQE > > > approach is taken, where the mmc core code issues the 3 commands one > at a time i.e. > > > mmc_erase(). Where DCMD is used, is for issuing flushes. > > > > > > For host controllers without CQE support, blk-mq support is extended > > > to synchronous reads/writes or, if the host supports > > > CAP_WAIT_WHILE_BUSY, asynchonous reads/writes. The advantage of > > > asynchronous reads/writes is that it allows the preparation of the > > > next request while the current request is in progress. > > > > > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > > > > I am trying to wrap my head around this large patch. The size makes it > > hard but I am doing my best. > > I also think that this patch should be split on two patches. The 1st one > introducing blk-mq and the 2nd one adding CQE support. > > [ I don't agree that they make more sense together, on the contrary, > it is very difficult to properly analyze blk-mq changes on their > own while there are mixed with CQE related ones. ] The CQE and non-CQE code paths are clearly marked. But maybe you are asking what the code would look like if we *never* had to support CQE. And my point is we *do* have to support CQE. Do you have any questions about the code? -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, October 04, 2017 11:48:27 AM Ulf Hansson wrote: > [...] > > >> MQ code that doesn't perform and therefore we cannot switch seamlessly > >> to MQ. > > > > I think that switching seamlessly to blk-mq in short/medium-term > > is not possible (SCSI tried and failed to do so). The changes to > > the old path are very complex and besides affecting performance > > they also affect error recovery handling (which needs to be tested > > properly before the switch). > > Agreed, and that's why I have queued up the new Kconfig option for > enabling the blkmq path from MMC. This seems premature - the new Kconfig option change for "mmc-mq" should belong to the patch adding "mmc-mq" support (otherwise it may just confuse users who enable it). Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 5 October 2017 at 12:55, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> wrote: > On Wednesday, October 04, 2017 11:48:27 AM Ulf Hansson wrote: >> [...] >> >> >> MQ code that doesn't perform and therefore we cannot switch seamlessly >> >> to MQ. >> > >> > I think that switching seamlessly to blk-mq in short/medium-term >> > is not possible (SCSI tried and failed to do so). The changes to >> > the old path are very complex and besides affecting performance >> > they also affect error recovery handling (which needs to be tested >> > properly before the switch). >> >> Agreed, and that's why I have queued up the new Kconfig option for >> enabling the blkmq path from MMC. > > This seems premature - the new Kconfig option change for "mmc-mq" should > belong to the patch adding "mmc-mq" support (otherwise it may just confuse > users who enable it). I agree! However my plan was to move forward with the CMDQ series, but I realize that I may need to drop the Kconfig patch, in case CMDQ don't make it for 4.15. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Wednesday, October 04, 2017 07:23:07 PM Hunter, Adrian wrote: > > -----Original Message----- > > From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@samsung.com] > > Sent: Wednesday, October 4, 2017 12:40 PM > > To: Linus Walleij <linus.walleij@linaro.org> > > Cc: Hunter, Adrian <adrian.hunter@intel.com>; Ulf Hansson > > <ulf.hansson@linaro.org>; linux-mmc <linux-mmc@vger.kernel.org>; linux- > > block <linux-block@vger.kernel.org>; linux-kernel <linux- > > kernel@vger.kernel.org>; Bough Chen <haibo.chen@nxp.com>; Alex > > Lemberg <alex.lemberg@sandisk.com>; Nowak, Mateusz > > <mateusz.nowak@intel.com>; Yuliy Izrailov <Yuliy.Izrailov@sandisk.com>; > > Jaehoon Chung <jh80.chung@samsung.com>; Dong Aisheng > > <dongas86@gmail.com>; Das Asutosh <asutoshd@codeaurora.org>; > > Zhangfei Gao <zhangfei.gao@gmail.com>; Sahitya Tummala > > <stummala@codeaurora.org>; Harjani Ritesh <riteshh@codeaurora.org>; > > Venu Byravarasu <vbyravarasu@nvidia.com>; Shawn Lin <shawn.lin@rock- > > chips.com>; Christoph Hellwig <hch@lst.de> > > Subject: Re: [PATCH V9 13/15] mmc: block: Add CQE and blk-mq support > > > > > > Hi, > > > > On Wednesday, October 04, 2017 09:39:45 AM Linus Walleij wrote: > > > On Fri, Sep 22, 2017 at 2:37 PM, Adrian Hunter <adrian.hunter@intel.com> > > wrote: > > > > > > > Add CQE support to the block driver, including: > > > > - optionally using DCMD for flush requests > > > > - "manually" issuing discard requests > > > > - issuing read / write requests to the CQE > > > > - supporting block-layer timeouts > > > > - handling recovery > > > > - supporting re-tuning > > > > > > > > CQE offers 25% - 50% better random multi-threaded I/O. There is a > > > > slight (e.g. 2%) drop in sequential read speed but no observable > > > > change to sequential write. > > > > > > > > CQE automatically sends the commands to complete requests. However > > > > it only supports reads / writes and so-called "direct commands" > > > > (DCMD). Furthermore DCMD is limited to one command at a time, but > > discards require 3 commands. > > > > That makes issuing discards through CQE very awkward, but some CQE's > > > > don't support DCMD anyway. So for discards, the existing non-CQE > > > > approach is taken, where the mmc core code issues the 3 commands one > > at a time i.e. > > > > mmc_erase(). Where DCMD is used, is for issuing flushes. > > > > > > > > For host controllers without CQE support, blk-mq support is extended > > > > to synchronous reads/writes or, if the host supports > > > > CAP_WAIT_WHILE_BUSY, asynchonous reads/writes. The advantage of > > > > asynchronous reads/writes is that it allows the preparation of the > > > > next request while the current request is in progress. > > > > > > > > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> > > > > > > I am trying to wrap my head around this large patch. The size makes it > > > hard but I am doing my best. > > > > I also think that this patch should be split on two patches. The 1st one > > introducing blk-mq and the 2nd one adding CQE support. > > > > [ I don't agree that they make more sense together, on the contrary, > > it is very difficult to properly analyze blk-mq changes on their > > own while there are mixed with CQE related ones. ] > > The CQE and non-CQE code paths are clearly marked. But maybe you The combined patch is > 1 kLOC which is a lot and since the CQE and non-CQE code paths are clearly marked it should be really easy to split them. > are asking what the code would look like if we *never* had to support CQE. > And my point is we *do* have to support CQE. We *do* but not in the same step, it is just normal kernel engineering practice to split patches on logical changes. This is not asking about something extraordinary. > Do you have any questions about the code? I would really hope to see more documentation about blk-mq changes first before starting to review it. The patch description documents CQE changes but not blk-mq ones and the code itself is also lacking in-code documentation describing new functions added for blk-mq. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday, October 05, 2017 02:00:48 PM Bartlomiej Zolnierkiewicz wrote: > > > > I am trying to wrap my head around this large patch. The size makes it > > > > hard but I am doing my best. > > > > > > I also think that this patch should be split on two patches. The 1st one > > > introducing blk-mq and the 2nd one adding CQE support. > > > > > > [ I don't agree that they make more sense together, on the contrary, > > > it is very difficult to properly analyze blk-mq changes on their > > > own while there are mixed with CQE related ones. ] > > > > The CQE and non-CQE code paths are clearly marked. But maybe you > > The combined patch is > 1 kLOC which is a lot and since the CQE and > non-CQE code paths are clearly marked it should be really easy to > split them. > > > are asking what the code would look like if we *never* had to support CQE. > > And my point is we *do* have to support CQE. > > We *do* but not in the same step, it is just normal kernel engineering > practice to split patches on logical changes. This is not asking about > something extraordinary. BTW: I sympathize with you that it takes long time to get CQE merged upstream and that you weren't told earlier that no new users of the old block API are welcomed. However since "mmc-mq" support has to be added as a preparation for CQE please try do it *properly* and also consider that many people may want just "mmc-mq" without CQE as their hardware simply doesn't support CQE. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/10/17 11:32, Ulf Hansson wrote: > On 22 September 2017 at 14:37, Adrian Hunter <adrian.hunter@intel.com> wrote: >> Add CQE support to the block driver, including: >> - optionally using DCMD for flush requests >> - "manually" issuing discard requests >> - issuing read / write requests to the CQE >> - supporting block-layer timeouts >> - handling recovery >> - supporting re-tuning >> >> CQE offers 25% - 50% better random multi-threaded I/O. There is a slight >> (e.g. 2%) drop in sequential read speed but no observable change to sequential >> write. >> >> CQE automatically sends the commands to complete requests. However it only >> supports reads / writes and so-called "direct commands" (DCMD). Furthermore >> DCMD is limited to one command at a time, but discards require 3 commands. >> That makes issuing discards through CQE very awkward, but some CQE's don't >> support DCMD anyway. So for discards, the existing non-CQE approach is >> taken, where the mmc core code issues the 3 commands one at a time i.e. >> mmc_erase(). Where DCMD is used, is for issuing flushes. >> >> For host controllers without CQE support, blk-mq support is extended to >> synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, >> asynchonous reads/writes. The advantage of asynchronous reads/writes is >> that it allows the preparation of the next request while the current >> request is in progress. >> >> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> >> --- >> drivers/mmc/core/block.c | 732 ++++++++++++++++++++++++++++++++++++++++++++++- >> drivers/mmc/core/block.h | 8 + >> drivers/mmc/core/queue.c | 427 +++++++++++++++++++++++++-- >> drivers/mmc/core/queue.h | 54 +++- >> 4 files changed, 1189 insertions(+), 32 deletions(-) > > I have re-started to review this change now, however as stated earlier > - the total number changes really doesn't make this easy to review. > > Until I am done, I have published a new cmdq_v9 branch via my mmc tree. Have you done any more testing? -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index c29dbcec7c61..d317fc306a0e 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -112,6 +112,7 @@ struct mmc_blk_data { #define MMC_BLK_WRITE BIT(1) #define MMC_BLK_DISCARD BIT(2) #define MMC_BLK_SECDISCARD BIT(3) +#define MMC_BLK_CQE_RECOVERY BIT(4) /* * Only set in main mmc_blk_data associated @@ -1307,7 +1308,10 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) else mmc_blk_reset_success(md, type); fail: - blk_end_request(req, status, blk_rq_bytes(req)); + if (req->mq_ctx) + blk_mq_end_request(req, status); + else + blk_end_request(req, status, blk_rq_bytes(req)); } static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, @@ -1377,7 +1381,10 @@ static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, if (!err) mmc_blk_reset_success(md, type); out: - blk_end_request(req, status, blk_rq_bytes(req)); + if (req->mq_ctx) + blk_mq_end_request(req, status); + else + blk_end_request(req, status, blk_rq_bytes(req)); } static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) @@ -1387,7 +1394,10 @@ static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) int ret = 0; ret = mmc_flush_cache(card); - blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); + if (req->mq_ctx) + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); + else + blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK); } /* @@ -1413,15 +1423,18 @@ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, } } -#define CMD_ERRORS \ - (R1_OUT_OF_RANGE | /* Command argument out of range */ \ - R1_ADDRESS_ERROR | /* Misaligned address */ \ +#define CMD_ERRORS_EXCL_OOR \ + (R1_ADDRESS_ERROR | /* Misaligned address */ \ R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\ R1_WP_VIOLATION | /* Tried to write to protected block */ \ R1_CARD_ECC_FAILED | /* Card ECC failed */ \ R1_CC_ERROR | /* Card controller error */ \ R1_ERROR) /* General/unknown error */ +#define CMD_ERRORS \ + (CMD_ERRORS_EXCL_OOR | \ + R1_OUT_OF_RANGE) /* Command argument out of range */ \ + static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) { u32 val; @@ -1698,6 +1711,138 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, *do_data_tag_p = do_data_tag; } +#define MMC_CQE_RETRIES 2 + +static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct request_queue *q = req->q; + struct mmc_host *host = mq->card->host; + unsigned long flags; + bool put_card; + int err; + + mmc_cqe_post_req(host, mrq); + + if (mrq->cmd && mrq->cmd->error) + err = mrq->cmd->error; + else if (mrq->data && mrq->data->error) + err = mrq->data->error; + else + err = 0; + + if (err) { + if (mqrq->retries++ < MMC_CQE_RETRIES) + blk_mq_requeue_request(req, true); + else + blk_mq_end_request(req, BLK_STS_IOERR); + } else if (mrq->data) { + if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else { + blk_mq_end_request(req, BLK_STS_OK); + } + + spin_lock_irqsave(q->queue_lock, flags); + + mq->in_flight[mmc_issue_type(mq, req)] -= 1; + + put_card = mmc_tot_in_flight(mq) == 0; + + mmc_cqe_check_busy(mq); + + spin_unlock_irqrestore(q->queue_lock, flags); + + if (!mq->cqe_busy) + blk_mq_run_hw_queues(q, true); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +void mmc_blk_cqe_recovery(struct mmc_queue *mq) +{ + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + int err; + + pr_debug("%s: CQE recovery start\n", mmc_hostname(host)); + + err = mmc_cqe_recovery(host); + if (err) + mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY); + else + mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY); + + pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); +} + +static void mmc_blk_cqe_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_cqe_complete_rq(mq, req); + else + blk_mq_complete_request(req); +} + +static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + mrq->done = mmc_blk_cqe_req_done; + mrq->recovery_notifier = mmc_cqe_recovery_notifier; + + return mmc_cqe_start_req(host, mrq); +} + +static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq, + struct request *req) +{ + struct mmc_blk_request *brq = &mqrq->brq; + + memset(brq, 0, sizeof(*brq)); + + brq->mrq.cmd = &brq->cmd; + brq->mrq.tag = req->tag; + + return &brq->mrq; +} + +static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req); + + mrq->cmd->opcode = MMC_SWITCH; + mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_FLUSH_CACHE << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B; + + return mmc_blk_cqe_start_req(mq->card->host, mrq); +} + +static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL); + + return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq); +} + static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_card *card, int disable_multi, @@ -1766,6 +1911,579 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, mqrq->areq.err_check = mmc_blk_err_check; } +#define MMC_MAX_RETRIES 5 +#define MMC_DATA_RETRIES 2 +#define MMC_NO_RETRIES (MMC_MAX_RETRIES + 1) + +/* Single sector read during recovery */ +static void mmc_blk_ss_read(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + blk_status_t status; + + while (1) { + mmc_blk_rw_rq_prep(mqrq, mq->card, 1, mq); + + mmc_wait_for_req(mq->card->host, &mqrq->brq.mrq); + + /* + * Not expecting command errors, so just give up in that case. + * If there are retries remaining, the request will get + * requeued. + */ + if (mqrq->brq.cmd.error) + return; + + if (blk_rq_bytes(req) <= 512) + break; + + status = mqrq->brq.data.error ? BLK_STS_IOERR : BLK_STS_OK; + + blk_update_request(req, status, 512); + } + + mqrq->retries = MMC_NO_RETRIES; +} + +static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq) +{ + return !!brq->mrq.sbc; +} + +static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq) +{ + return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR; +} + +static inline bool mmc_blk_in_tran_state(u32 status) +{ + /* + * Some cards mishandle the status bits, so make sure to check both the + * busy indication and the card state. + */ + return status & R1_READY_FOR_DATA && + (R1_CURRENT_STATE(status) == R1_STATE_TRAN); +} + +/* + * Check for errors the host controller driver might not have seen such as + * response mode errors or invalid card state. + */ +static bool mmc_blk_status_error(struct request *req, u32 status) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + u32 stop_err_bits = mmc_blk_stop_err_bits(brq); + + return brq->cmd.resp[0] & CMD_ERRORS || + brq->stop.resp[0] & stop_err_bits || + status & stop_err_bits || + (rq_data_dir(req) == WRITE && !mmc_blk_in_tran_state(status)); +} + +static inline bool mmc_blk_cmd_started(struct mmc_blk_request *brq) +{ + return !brq->sbc.error && !brq->cmd.error && + !(brq->cmd.resp[0] & CMD_ERRORS); +} + +static unsigned int mmc_blk_clock_khz(struct mmc_host *host) +{ + if (host->actual_clock) + return host->actual_clock / 1000; + + /* Clock may be subject to a divisor, fudge it by a factor of 2. */ + if (host->ios.clock) + return host->ios.clock / 2000; + + /* How can there be no clock */ + WARN_ON_ONCE(1); + return 100; /* 100 kHz is minimum possible value */ +} + +static unsigned long mmc_blk_data_timeout_jiffies(struct mmc_host *host, + struct mmc_data *data) +{ + unsigned int ms = DIV_ROUND_UP(data->timeout_ns, 1000000); + unsigned int khz; + + if (data->timeout_clks) { + khz = mmc_blk_clock_khz(host); + ms += DIV_ROUND_UP(data->timeout_clks, khz); + } + + return msecs_to_jiffies(ms); +} + +static int mmc_blk_card_stuck(struct mmc_card *card, struct request *req, + u32 *resp_errs) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_data *data = &mqrq->brq.data; + unsigned long timeout; + u32 status; + int err; + + timeout = jiffies + mmc_blk_data_timeout_jiffies(card->host, data); + + while (1) { + bool done = time_after(jiffies, timeout); + + err = __mmc_send_status(card, &status, 5); + if (err) { + pr_err("%s: error %d requesting status\n", + req->rq_disk->disk_name, err); + break; + } + + /* Accumulate any response error bits seen */ + if (resp_errs) + *resp_errs |= status; + + if (mmc_blk_in_tran_state(status)) + break; + + /* Timeout if the device never becomes ready */ + if (done) { + pr_err("%s: Card stuck in wrong state! %s %s\n", + mmc_hostname(card->host), + req->rq_disk->disk_name, __func__); + err = -ETIMEDOUT; + break; + } + } + + return err; +} + +static int mmc_blk_send_stop(struct mmc_card *card) +{ + struct mmc_command cmd = { + .opcode = MMC_STOP_TRANSMISSION, + .flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC, + }; + + return mmc_wait_for_cmd(card->host, &cmd, 5); +} + +static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) +{ + int err; + + mmc_retune_hold_now(card->host); + + mmc_blk_send_stop(card); + + err = mmc_blk_card_stuck(card, req, NULL); + + mmc_retune_release(card->host); + + return err; +} + +static void mmc_blk_rw_recovery(struct mmc_queue *mq, struct request *req) +{ + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = mq->card; + u32 status; + u32 blocks; + int err; + + /* + * Status error bits might get lost during re-tuning so don't allow + * re-tuning yet. + */ + mmc_retune_hold_now(card->host); + + /* + * Some errors the host driver might not have seen. Set the number of + * bytes transferred to zero in that case. + */ + err = __mmc_send_status(card, &status, 0); + if (err || mmc_blk_status_error(req, status)) + brq->data.bytes_xfered = 0; + + mmc_retune_release(card->host); + + /* + * Try again to get the status. This also provides an opportunity for + * re-tuning. + */ + if (err) + err = __mmc_send_status(card, &status, 0); + + /* + * Nothing more to do after the number of bytes transferred has been + * updated and there is no card. + */ + if (err && mmc_detect_card_removed(card->host)) + return; + + /* Try to get back to "tran" state */ + if (err || !mmc_blk_in_tran_state(status)) + err = mmc_blk_fix_state(mq->card, req); + + /* + * Special case for SD cards where the card might record the number of + * blocks written. + */ + if (!err && mmc_blk_cmd_started(brq) && mmc_card_sd(card) && + rq_data_dir(req) == WRITE && !mmc_sd_num_wr_blocks(card, &blocks)) + brq->data.bytes_xfered = blocks << 9; + + /* Reset if the card is in a bad state */ + if (err && mmc_blk_reset(md, card->host, type)) { + pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); + mqrq->retries = MMC_NO_RETRIES; + return; + } + + /* + * If anything was done, just return and if there is anything remaining + * on the request it will get requeued. + */ + if (brq->data.bytes_xfered) + return; + + /* Reset before last retry */ + if (mqrq->retries + 1 == MMC_MAX_RETRIES) + mmc_blk_reset(md, card->host, type); + + /* Command errors fail fast, so use all MMC_MAX_RETRIES */ + if (brq->sbc.error || brq->cmd.error) + return; + + /* Reduce the remaining retries for data errors */ + if (mqrq->retries < MMC_MAX_RETRIES - MMC_DATA_RETRIES) { + mqrq->retries = MMC_MAX_RETRIES - MMC_DATA_RETRIES; + return; + } + + /* FIXME: Missing single sector read for large sector size */ + if (rq_data_dir(req) == READ && !mmc_large_sector(card)) { + /* Read one sector at a time */ + mmc_blk_ss_read(mq, req); + return; + } +} + +static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq) +{ + mmc_blk_eval_resp_error(brq); + + return brq->sbc.error || brq->cmd.error || brq->stop.error || + brq->data.error || brq->cmd.resp[0] & CMD_ERRORS; +} + +static int mmc_blk_card_busy(struct mmc_card *card, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + u32 status = 0; + int err; + + if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ) + return 0; + + mmc_retune_hold_now(card->host); + + err = mmc_blk_card_stuck(card, req, &status); + + mmc_retune_release(card->host); + + /* + * Do not assume data transferred correctly if there are any error bits + * set. + */ + if (!err && status & mmc_blk_stop_err_bits(&mqrq->brq)) { + mqrq->brq.data.bytes_xfered = 0; + err = -EIO; + } + + /* Copy the exception bit so it will be seen later on */ + if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT) + mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT; + + return err; +} + +static inline void mmc_blk_rw_reset_success(struct mmc_queue *mq, + struct request *req) +{ + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + + mmc_blk_reset_success(mq->blkdata, type); +} + +static void mmc_blk_mq_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + unsigned int nr_bytes = mqrq->brq.data.bytes_xfered; + + if (nr_bytes) { + if (blk_update_request(req, BLK_STS_OK, nr_bytes)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else if (mqrq->retries++ < MMC_MAX_RETRIES) { + blk_mq_requeue_request(req, true); + } else { + if (mmc_card_removed(mq->card)) + req->rq_flags |= RQF_QUIET; + blk_mq_end_request(req, BLK_STS_IOERR); + } +} + +static bool mmc_blk_urgent_bkops_needed(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + return mmc_card_mmc(mq->card) && + (mqrq->brq.cmd.resp[0] & R1_EXCEPTION_EVENT || + mqrq->brq.stop.resp[0] & R1_EXCEPTION_EVENT); +} + +static void mmc_blk_urgent_bkops(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + if (mmc_blk_urgent_bkops_needed(mq, mqrq)) + mmc_start_bkops(mq->card, true); +} + +static int mmc_blk_card_busy_check(struct mmc_queue *mq, struct request *req) +{ + if (mmc_queue_rw_async(mq->card->host)) + return 0; + + return mmc_blk_card_busy(mq->card, req); +} + +void mmc_blk_mq_complete(struct request *req) +{ + struct mmc_queue *mq = req->q->queuedata; + + if (mq->use_cqe) + mmc_blk_cqe_complete_rq(mq, req); + else + mmc_blk_mq_complete_rq(mq, req); +} + +static void mmc_blk_finish_rw_rq_blocking(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + if (mmc_blk_rq_error(&mqrq->brq) || mmc_blk_card_busy_check(mq, req)) + mmc_blk_rw_recovery(mq, req); + else + mmc_blk_rw_reset_success(mq, req); + + mmc_blk_urgent_bkops(mq, mqrq); + + mq->rw_wait = false; + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_mq_complete_rq(mq, req); + else + blk_mq_complete_request(req); +} + +void mmc_blk_mq_recovery(struct mmc_queue *mq) +{ + struct request *req = mq->recovery_req; + + mq->recovery_req = NULL; + + mmc_blk_finish_rw_rq_blocking(mq, req); +} + +static void mmc_blk_issue_rw_rq_blocking(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); + + mmc_wait_for_req(mq->card->host, &mqrq->brq.mrq); + + mmc_blk_finish_rw_rq_blocking(mq, req); +} + +static void mmc_blk_mq_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_host *host = mq->card->host; + unsigned long flags; + bool put_card; + + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_urgent_bkops_needed(mq, mqrq)) { + if (host->ops->post_req) + host->ops->post_req(host, mrq, 0); + mq->recovery_needed = true; + mq->recovery_req = req; + wake_up(&mq->wait); + schedule_work(&mq->recovery_work); + return; + } + + mmc_blk_rw_reset_success(mq, req); + + mq->rw_wait = false; + wake_up(&mq->wait); + + if (host->ops->post_req) + host->ops->post_req(host, mrq, 0); + + blk_mq_complete_request(req); + + spin_lock_irqsave(q->queue_lock, flags); + + mq->in_flight[mmc_issue_type(mq, req)] -= 1; + + put_card = mmc_tot_in_flight(mq) == 0; + + spin_unlock_irqrestore(q->queue_lock, flags); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +static bool mmc_blk_rw_wait_cond(struct mmc_queue *mq, int *err) +{ + if (mq->recovery_needed) { + *err = -EBUSY; + return true; + } + + return !mq->rw_wait; +} + +static int mmc_blk_rw_wait(struct mmc_queue *mq) +{ + int err = 0; + + wait_event(mq->wait, mmc_blk_rw_wait_cond(mq, &err)); + + return err; +} + +static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + int err = 0; + + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); + + mqrq->brq.mrq.done = mmc_blk_mq_req_done; + + if (host->ops->pre_req) + host->ops->pre_req(host, &mqrq->brq.mrq); + + err = mmc_blk_rw_wait(mq); + if (err) + goto out_post_req; + + mq->rw_wait = true; + + err = mmc_start_request(host, &mqrq->brq.mrq); + + if (err) + mq->rw_wait = false; + + /* Release re-tuning here where there is no synchronization required */ + mmc_retune_release(host); + +out_post_req: + if (err && host->ops->post_req) + host->ops->post_req(host, &mqrq->brq.mrq, err); + + return err; +} + +static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host) +{ + if (mq->use_cqe) + return host->cqe_ops->cqe_wait_for_idle(host); + + if (mmc_queue_rw_async(host)) + return mmc_blk_rw_wait(mq); + + return 0; +} + +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + struct mmc_host *host = card->host; + int ret; + + ret = mmc_blk_part_switch(card, md->part_type); + if (ret) + return MMC_REQ_FAILED_TO_START; + + switch (mmc_issue_type(mq, req)) { + case MMC_ISSUE_SYNC: + ret = mmc_blk_wait_for_idle(mq, host); + if (ret) + return MMC_REQ_BUSY; + switch (req_op(req)) { + case REQ_OP_DISCARD: + mmc_blk_issue_discard_rq(mq, req); + break; + case REQ_OP_SECURE_ERASE: + mmc_blk_issue_secdiscard_rq(mq, req); + break; + case REQ_OP_FLUSH: + mmc_blk_issue_flush(mq, req); + break; + case REQ_OP_READ: + case REQ_OP_WRITE: + mmc_blk_issue_rw_rq_blocking(mq, req); + break; + default: + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; + } + return MMC_REQ_FINISHED; + case MMC_ISSUE_DCMD: + case MMC_ISSUE_ASYNC: + switch (req_op(req)) { + case REQ_OP_FLUSH: + ret = mmc_blk_cqe_issue_flush(mq, req); + break; + case REQ_OP_READ: + case REQ_OP_WRITE: + if (mq->use_cqe) + ret = mmc_blk_cqe_issue_rw_rq(mq, req); + else + ret = mmc_blk_mq_issue_rw_rq(mq, req); + break; + default: + WARN_ON_ONCE(1); + ret = -EINVAL; + } + if (!ret) + return MMC_REQ_STARTED; + return ret == -EBUSY ? MMC_REQ_BUSY : MMC_REQ_FAILED_TO_START; + default: + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; + } +} + static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card, struct mmc_blk_request *brq, struct request *req, bool old_req_pending) @@ -2133,7 +2851,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, INIT_LIST_HEAD(&md->rpmbs); md->usage = 1; - ret = mmc_init_queue(&md->queue, card, &md->lock, subname); + ret = mmc_init_queue(&md->queue, card, &md->lock, subname, area_type); if (ret) goto err_putdisk; diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h index 860ca7c8df86..742aa4d27cbf 100644 --- a/drivers/mmc/core/block.h +++ b/drivers/mmc/core/block.h @@ -6,4 +6,12 @@ void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req); +enum mmc_issued; + +void mmc_blk_cqe_recovery(struct mmc_queue *mq); + +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req); +void mmc_blk_mq_complete(struct request *req); +void mmc_blk_mq_recovery(struct mmc_queue *mq); + #endif diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 4f33d277b125..9d7ec3b3f9a9 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -22,6 +22,7 @@ #include "block.h" #include "core.h" #include "card.h" +#include "host.h" /* * Prepare a MMC request. This just filters out odd stuff. @@ -34,10 +35,153 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) return BLKPREP_KILL; req->rq_flags |= RQF_DONTPREP; + req_to_mmc_queue_req(req)->retries = 0; return BLKPREP_OK; } +static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq) +{ + /* Allow only 1 DCMD at a time */ + return mq->in_flight[MMC_ISSUE_DCMD]; +} + +void mmc_cqe_check_busy(struct mmc_queue *mq) +{ + if ((mq->cqe_busy & MMC_CQE_DCMD_BUSY) && !mmc_cqe_dcmd_busy(mq)) + mq->cqe_busy &= ~MMC_CQE_DCMD_BUSY; + + mq->cqe_busy &= ~MMC_CQE_QUEUE_FULL; +} + +static inline bool mmc_cqe_can_dcmd(struct mmc_host *host) +{ + return host->caps2 & MMC_CAP2_CQE_DCMD; +} + +enum mmc_issue_type mmc_cqe_issue_type(struct mmc_host *host, + struct request *req) +{ + switch (req_op(req)) { + case REQ_OP_DRV_IN: + case REQ_OP_DRV_OUT: + case REQ_OP_DISCARD: + case REQ_OP_SECURE_ERASE: + return MMC_ISSUE_SYNC; + case REQ_OP_FLUSH: + return mmc_cqe_can_dcmd(host) ? MMC_ISSUE_DCMD : MMC_ISSUE_SYNC; + default: + return MMC_ISSUE_ASYNC; + } +} + +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req) +{ + struct mmc_host *host = mq->card->host; + + if (mq->use_cqe) + return mmc_cqe_issue_type(host, req); + + if (mmc_queue_rw_async(host) && + (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE)) + return MMC_ISSUE_ASYNC; + + return MMC_ISSUE_SYNC; +} + +static void __mmc_cqe_recovery_notifier(struct mmc_queue *mq) +{ + if (!mq->recovery_needed) { + mq->recovery_needed = true; + schedule_work(&mq->recovery_work); + } +} + +void mmc_cqe_recovery_notifier(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + __mmc_cqe_recovery_notifier(mq); + spin_unlock_irqrestore(q->queue_lock, flags); +} + +static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_queue *mq = req->q->queuedata; + struct mmc_host *host = mq->card->host; + enum mmc_issue_type issue_type = mmc_issue_type(mq, req); + bool recovery_needed = false; + + switch (issue_type) { + case MMC_ISSUE_ASYNC: + case MMC_ISSUE_DCMD: + if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) { + if (recovery_needed) + __mmc_cqe_recovery_notifier(mq); + return BLK_EH_RESET_TIMER; + } + /* No timeout */ + return BLK_EH_HANDLED; + default: + /* Timeout is handled by mmc core */ + return BLK_EH_RESET_TIMER; + } +} + +static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req, + bool reserved) +{ + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + unsigned long flags; + int ret; + + spin_lock_irqsave(q->queue_lock, flags); + + if (mq->recovery_needed || !mq->use_cqe) + ret = BLK_EH_RESET_TIMER; + else + ret = mmc_cqe_timed_out(req); + + spin_unlock_irqrestore(q->queue_lock, flags); + + return ret; +} + +static void mmc_mq_recovery_handler(struct work_struct *work) +{ + struct mmc_queue *mq = container_of(work, struct mmc_queue, + recovery_work); + struct request_queue *q = mq->queue; + + mmc_get_card(mq->card, &mq->ctx); + + mq->in_recovery = true; + + if (mq->use_cqe) + mmc_blk_cqe_recovery(mq); + else + mmc_blk_mq_recovery(mq); + + mq->in_recovery = false; + + spin_lock_irq(q->queue_lock); + mq->recovery_needed = false; + spin_unlock_irq(q->queue_lock); + + mmc_put_card(mq->card, &mq->ctx); + + blk_mq_run_hw_queues(q, true); +} + static int mmc_queue_thread(void *d) { struct mmc_queue *mq = d; @@ -154,11 +298,10 @@ static void mmc_queue_setup_discard(struct request_queue *q, * @req: the request * @gfp: memory allocation policy */ -static int mmc_init_request(struct request_queue *q, struct request *req, - gfp_t gfp) +static int __mmc_init_request(struct mmc_queue *mq, struct request *req, + gfp_t gfp) { struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); - struct mmc_queue *mq = q->queuedata; struct mmc_card *card = mq->card; struct mmc_host *host = card->host; @@ -169,6 +312,12 @@ static int mmc_init_request(struct request_queue *q, struct request *req, return 0; } +static int mmc_init_request(struct request_queue *q, struct request *req, + gfp_t gfp) +{ + return __mmc_init_request(q->queuedata, req, gfp); +} + static void mmc_exit_request(struct request_queue *q, struct request *req) { struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); @@ -177,6 +326,124 @@ static void mmc_exit_request(struct request_queue *q, struct request *req) mq_rq->sg = NULL; } +static int mmc_mq_init_request(struct blk_mq_tag_set *set, struct request *req, + unsigned int hctx_idx, unsigned int numa_node) +{ + return __mmc_init_request(set->driver_data, req, GFP_KERNEL); +} + +static void mmc_mq_exit_request(struct blk_mq_tag_set *set, struct request *req, + unsigned int hctx_idx) +{ + struct mmc_queue *mq = set->driver_data; + + mmc_exit_request(mq->queue, req); +} + +static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, + const struct blk_mq_queue_data *bd) +{ + struct request *req = bd->rq; + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + enum mmc_issue_type issue_type; + enum mmc_issued issued; + bool get_card, cqe_retune_ok; + int ret; + + if (mmc_card_removed(mq->card)) { + req->rq_flags |= RQF_QUIET; + return BLK_STS_IOERR; + } + + issue_type = mmc_issue_type(mq, req); + + spin_lock_irq(q->queue_lock); + + if (mq->recovery_needed) { + spin_unlock_irq(q->queue_lock); + return BLK_STS_RESOURCE; + } + + switch (issue_type) { + case MMC_ISSUE_DCMD: + if (mmc_cqe_dcmd_busy(mq)) { + mq->cqe_busy |= MMC_CQE_DCMD_BUSY; + spin_unlock_irq(q->queue_lock); + return BLK_STS_RESOURCE; + } + break; + case MMC_ISSUE_ASYNC: + break; + default: + /* + * Timeouts are handled by mmc core, so set a large value to + * avoid races. + */ + req->timeout = 600 * HZ; + break; + } + + mq->in_flight[issue_type] += 1; + get_card = mmc_tot_in_flight(mq) == 1; + cqe_retune_ok = mmc_cqe_qcnt(mq) == 1; + + spin_unlock_irq(q->queue_lock); + + if (!(req->rq_flags & RQF_DONTPREP)) { + req_to_mmc_queue_req(req)->retries = 0; + req->rq_flags |= RQF_DONTPREP; + } + + if (get_card) + mmc_get_card(card, &mq->ctx); + + if (mq->use_cqe) { + host->retune_now = host->need_retune && cqe_retune_ok && + !host->hold_retune; + } + + blk_mq_start_request(req); + + issued = mmc_blk_mq_issue_rq(mq, req); + + switch (issued) { + case MMC_REQ_BUSY: + ret = BLK_STS_RESOURCE; + break; + case MMC_REQ_FAILED_TO_START: + ret = BLK_STS_IOERR; + break; + default: + ret = BLK_STS_OK; + break; + } + + if (issued != MMC_REQ_STARTED) { + bool put_card = false; + + spin_lock_irq(q->queue_lock); + mq->in_flight[issue_type] -= 1; + if (mmc_tot_in_flight(mq) == 0) + put_card = true; + spin_unlock_irq(q->queue_lock); + if (put_card) + mmc_put_card(card, &mq->ctx); + } + + return ret; +} + +static const struct blk_mq_ops mmc_mq_cqe_ops = { + .queue_rq = mmc_mq_queue_rq, + .init_request = mmc_mq_init_request, + .exit_request = mmc_mq_exit_request, + .complete = mmc_blk_mq_complete, + .timeout = mmc_mq_timed_out, +}; + static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) { struct mmc_host *host = card->host; @@ -198,6 +465,72 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) /* Initialize thread_sem even if it is not used */ sema_init(&mq->thread_sem, 1); + + /* Initialize recovery_work even if it is not used */ + INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler); + + init_waitqueue_head(&mq->wait); +} + +static int mmc_mq_init_queue(struct mmc_queue *mq, int q_depth, + const struct blk_mq_ops *mq_ops, spinlock_t *lock) +{ + int ret; + + memset(&mq->tag_set, 0, sizeof(mq->tag_set)); + mq->tag_set.ops = mq_ops; + mq->tag_set.queue_depth = q_depth; + mq->tag_set.numa_node = NUMA_NO_NODE; + mq->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE | + BLK_MQ_F_BLOCKING; + mq->tag_set.nr_hw_queues = 1; + mq->tag_set.cmd_size = sizeof(struct mmc_queue_req); + mq->tag_set.driver_data = mq; + + ret = blk_mq_alloc_tag_set(&mq->tag_set); + if (ret) + return ret; + + mq->queue = blk_mq_init_queue(&mq->tag_set); + if (IS_ERR(mq->queue)) { + ret = PTR_ERR(mq->queue); + goto free_tag_set; + } + + mq->queue->queue_lock = lock; + mq->queue->queuedata = mq; + + return 0; + +free_tag_set: + blk_mq_free_tag_set(&mq->tag_set); + + return ret; +} + +#define MMC_QUEUE_DEPTH 64 + +static int mmc_mq_init(struct mmc_queue *mq, struct mmc_card *card, + spinlock_t *lock) +{ + struct mmc_host *host = card->host; + int q_depth; + int ret; + + if (mq->use_cqe) + q_depth = min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth); + else + q_depth = MMC_QUEUE_DEPTH; + + ret = mmc_mq_init_queue(mq, q_depth, &mmc_mq_cqe_ops, lock); + if (ret) + return ret; + + blk_queue_rq_timeout(mq->queue, 60 * HZ); + + mmc_setup_queue(mq, card); + + return 0; } /** @@ -210,12 +543,18 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) * Initialise a MMC card request queue. */ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, - spinlock_t *lock, const char *subname) + spinlock_t *lock, const char *subname, int area_type) { struct mmc_host *host = card->host; int ret = -ENOMEM; mq->card = card; + + mq->use_cqe = host->cqe_enabled && area_type != MMC_BLK_DATA_AREA_RPMB; + + if (mq->use_cqe || mmc_host_use_blk_mq(host)) + return mmc_mq_init(mq, card, lock); + mq->queue = blk_alloc_queue(GFP_KERNEL); if (!mq->queue) return -ENOMEM; @@ -251,11 +590,63 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, return ret; } +static void mmc_mq_queue_suspend(struct mmc_queue *mq) +{ + blk_mq_quiesce_queue(mq->queue); + + /* + * The host remains claimed while there are outstanding requests, so + * simply claiming and releasing here ensures there are none. + */ + mmc_claim_host(mq->card->host); + mmc_release_host(mq->card->host); +} + +static void mmc_mq_queue_resume(struct mmc_queue *mq) +{ + blk_mq_unquiesce_queue(mq->queue); +} + +static void __mmc_queue_suspend(struct mmc_queue *mq) +{ + struct request_queue *q = mq->queue; + unsigned long flags; + + if (!mq->suspended) { + mq->suspended |= true; + + spin_lock_irqsave(q->queue_lock, flags); + blk_stop_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); + + down(&mq->thread_sem); + } +} + +static void __mmc_queue_resume(struct mmc_queue *mq) +{ + struct request_queue *q = mq->queue; + unsigned long flags; + + if (mq->suspended) { + mq->suspended = false; + + up(&mq->thread_sem); + + spin_lock_irqsave(q->queue_lock, flags); + blk_start_queue(q); + spin_unlock_irqrestore(q->queue_lock, flags); + } +} + void mmc_cleanup_queue(struct mmc_queue *mq) { struct request_queue *q = mq->queue; unsigned long flags; + if (q->mq_ops) + return; + /* Make sure the queue isn't suspended, as that will deadlock */ mmc_queue_resume(mq); @@ -283,17 +674,11 @@ void mmc_cleanup_queue(struct mmc_queue *mq) void mmc_queue_suspend(struct mmc_queue *mq) { struct request_queue *q = mq->queue; - unsigned long flags; - - if (!mq->suspended) { - mq->suspended |= true; - - spin_lock_irqsave(q->queue_lock, flags); - blk_stop_queue(q); - spin_unlock_irqrestore(q->queue_lock, flags); - down(&mq->thread_sem); - } + if (q->mq_ops) + mmc_mq_queue_suspend(mq); + else + __mmc_queue_suspend(mq); } /** @@ -303,17 +688,11 @@ void mmc_queue_suspend(struct mmc_queue *mq) void mmc_queue_resume(struct mmc_queue *mq) { struct request_queue *q = mq->queue; - unsigned long flags; - - if (mq->suspended) { - mq->suspended = false; - up(&mq->thread_sem); - - spin_lock_irqsave(q->queue_lock, flags); - blk_start_queue(q); - spin_unlock_irqrestore(q->queue_lock, flags); - } + if (q->mq_ops) + mmc_mq_queue_resume(mq); + else + __mmc_queue_resume(mq); } /* diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h index 68f68ecd94ea..792ff5f94731 100644 --- a/drivers/mmc/core/queue.h +++ b/drivers/mmc/core/queue.h @@ -7,6 +7,20 @@ #include <linux/mmc/core.h> #include <linux/mmc/host.h> +enum mmc_issued { + MMC_REQ_STARTED, + MMC_REQ_BUSY, + MMC_REQ_FAILED_TO_START, + MMC_REQ_FINISHED, +}; + +enum mmc_issue_type { + MMC_ISSUE_SYNC, + MMC_ISSUE_DCMD, + MMC_ISSUE_ASYNC, + MMC_ISSUE_MAX, +}; + static inline struct mmc_queue_req *req_to_mmc_queue_req(struct request *rq) { return blk_mq_rq_to_pdu(rq); @@ -56,12 +70,15 @@ struct mmc_queue_req { int drv_op_result; void *drv_op_data; unsigned int ioc_count; + int retries; }; struct mmc_queue { struct mmc_card *card; struct task_struct *thread; struct semaphore thread_sem; + struct mmc_ctx ctx; + struct blk_mq_tag_set tag_set; bool suspended; bool asleep; struct mmc_blk_data *blkdata; @@ -73,14 +90,49 @@ struct mmc_queue { * associated mmc_queue_req data. */ int qcnt; + + int in_flight[MMC_ISSUE_MAX]; + unsigned int cqe_busy; +#define MMC_CQE_DCMD_BUSY BIT(0) +#define MMC_CQE_QUEUE_FULL BIT(1) + bool use_cqe; + bool recovery_needed; + bool in_recovery; + bool rw_wait; + struct work_struct recovery_work; + wait_queue_head_t wait; + struct request *recovery_req; }; extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, - const char *); + const char *, int); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); extern void mmc_queue_resume(struct mmc_queue *); extern unsigned int mmc_queue_map_sg(struct mmc_queue *, struct mmc_queue_req *); +void mmc_cqe_check_busy(struct mmc_queue *mq); +void mmc_cqe_recovery_notifier(struct mmc_request *mrq); + +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req); + +static inline int mmc_tot_in_flight(struct mmc_queue *mq) +{ + return mq->in_flight[MMC_ISSUE_SYNC] + + mq->in_flight[MMC_ISSUE_DCMD] + + mq->in_flight[MMC_ISSUE_ASYNC]; +} + +static inline int mmc_cqe_qcnt(struct mmc_queue *mq) +{ + return mq->in_flight[MMC_ISSUE_DCMD] + + mq->in_flight[MMC_ISSUE_ASYNC]; +} + +static inline bool mmc_queue_rw_async(struct mmc_host *host) +{ + return host->caps & MMC_CAP_WAIT_WHILE_BUSY; +} + #endif
Add CQE support to the block driver, including: - optionally using DCMD for flush requests - "manually" issuing discard requests - issuing read / write requests to the CQE - supporting block-layer timeouts - handling recovery - supporting re-tuning CQE offers 25% - 50% better random multi-threaded I/O. There is a slight (e.g. 2%) drop in sequential read speed but no observable change to sequential write. CQE automatically sends the commands to complete requests. However it only supports reads / writes and so-called "direct commands" (DCMD). Furthermore DCMD is limited to one command at a time, but discards require 3 commands. That makes issuing discards through CQE very awkward, but some CQE's don't support DCMD anyway. So for discards, the existing non-CQE approach is taken, where the mmc core code issues the 3 commands one at a time i.e. mmc_erase(). Where DCMD is used, is for issuing flushes. For host controllers without CQE support, blk-mq support is extended to synchronous reads/writes or, if the host supports CAP_WAIT_WHILE_BUSY, asynchonous reads/writes. The advantage of asynchronous reads/writes is that it allows the preparation of the next request while the current request is in progress. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> --- drivers/mmc/core/block.c | 732 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/mmc/core/block.h | 8 + drivers/mmc/core/queue.c | 427 +++++++++++++++++++++++++-- drivers/mmc/core/queue.h | 54 +++- 4 files changed, 1189 insertions(+), 32 deletions(-)