| Message ID | 1507206983-16096-2-git-send-email-pmorel@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
I strongly agree. This will make IOMMU assignment easier. 在 2017/10/5 下午8:36, Pierre Morel 写道: > When initializing the PCI-bus master pci_init_bus_master(PCIDevice *) > calls pci_device_iommu_address_space(PCIDevice *) which in turn calls > iommu_bus->iommu_fn(bus, opaque,devfn) > > If the device entry of the PCI-bus is not initialized to point to the > PCIDevice structure, the iommu_fn() function, getting only bus and > devno, is unable to retrieve the PCIDevice. > > Usually it is not a problem as the DMA address space is depending of > the BUS but in an architecture like S390, each PCI Device can have > its own DMA address space. > Being able to setup the DMA address space at the right moment will > greatly simplify the implementation. > > This patch proposes to setup the bus device entry before calling > pci_init_bus_master() and reset the entry in case of error. > > Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> > --- > hw/pci/pci.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/hw/pci/pci.c b/hw/pci/pci.c > index 1e6fb88..3e64492 100644 > --- a/hw/pci/pci.c > +++ b/hw/pci/pci.c > @@ -1026,6 +1026,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, > address_space_init(&pci_dev->bus_master_as, > &pci_dev->bus_master_container_region, pci_dev->name); > > + bus->devices[devfn] = pci_dev; > if (qdev_hotplug) { > pci_init_bus_master(pci_dev); > } > @@ -1062,6 +1063,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, > if (local_err) { > error_propagate(errp, local_err); > do_pci_unregister_device(pci_dev); > + bus->devices[devfn] = NULL; > return NULL; > } > > @@ -1071,7 +1073,6 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, > config_write = pci_default_write_config; > pci_dev->config_read = config_read; > pci_dev->config_write = config_write; > - bus->devices[devfn] = pci_dev; > pci_dev->version_id = 2; /* Current pci device vmstate version */ > return pci_dev; > }
diff --git a/hw/pci/pci.c b/hw/pci/pci.c index 1e6fb88..3e64492 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -1026,6 +1026,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, address_space_init(&pci_dev->bus_master_as, &pci_dev->bus_master_container_region, pci_dev->name); + bus->devices[devfn] = pci_dev; if (qdev_hotplug) { pci_init_bus_master(pci_dev); } @@ -1062,6 +1063,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, if (local_err) { error_propagate(errp, local_err); do_pci_unregister_device(pci_dev); + bus->devices[devfn] = NULL; return NULL; } @@ -1071,7 +1073,6 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, config_write = pci_default_write_config; pci_dev->config_read = config_read; pci_dev->config_write = config_write; - bus->devices[devfn] = pci_dev; pci_dev->version_id = 2; /* Current pci device vmstate version */ return pci_dev; }
When initializing the PCI-bus master pci_init_bus_master(PCIDevice *) calls pci_device_iommu_address_space(PCIDevice *) which in turn calls iommu_bus->iommu_fn(bus, opaque,devfn) If the device entry of the PCI-bus is not initialized to point to the PCIDevice structure, the iommu_fn() function, getting only bus and devno, is unable to retrieve the PCIDevice. Usually it is not a problem as the DMA address space is depending of the BUS but in an architecture like S390, each PCI Device can have its own DMA address space. Being able to setup the DMA address space at the right moment will greatly simplify the implementation. This patch proposes to setup the bus device entry before calling pci_init_bus_master() and reset the entry in case of error. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> --- hw/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)