| Message ID | 20171006222428.12211.3635.stgit@bhelgaas-glaptop.roam.corp.google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Bjorn, On 06/10/17 23:24, Bjorn Helgaas wrote: > From: Bjorn Helgaas <bhelgaas@google.com> > > Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is > behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter > never selects it as the default, which means Xorg auto-detection doesn't > work. > > VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., > [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are > not configurable by BARs. Consequently, multiple VGA devices can conflict > with each other. The VGA arbiter avoids conflicts by ensuring that those > legacy resources are only routed to one VGA device at a time. > > The arbiter identifies the "default VGA" device, i.e., a legacy VGA device > that was used by boot firmware. It selects the first device that: > > - is of PCI_CLASS_DISPLAY_VGA, > - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and > - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. > > Some systems don't have such a device. For example, if a host bridge > doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any > devices below it. Or, as on the HiSilicon D05, the VGA device may be > behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the > legacy VGA resources will never reach the device. > > This patch extends the arbiter so that if it doesn't find a device that > meets all the above criteria, it selects the first device that: > > - is of PCI_CLASS_DISPLAY_VGA and > - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled > > If it doesn't find even that, it selects the first device that: > > - is of class PCI_CLASS_DISPLAY_VGA. > > Such a device may not be able to use the legacy VGA resources, but most > drivers can operate the device without those. Setting it as the default > device means its "boot_vga" sysfs file will contain "1", which Xorg (via > libpciaccess) uses to help select its default output device. > > This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in > particular; see the link below). > > It also replaces the powerpc fixup_vga() quirk, albeit with slightly > different semantics: the quirk selected the first VGA device we found, and > overrode that selection with any enabled VGA device we found. If there > were several enabled VGA devices, the *last* one we found would become the > default. > > The code here instead selects the *first* enabled VGA device we find, and > if none are enabled, the first VGA device we find. > > Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net > Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > --- > arch/powerpc/kernel/pci-common.c | 12 ------------ > drivers/gpu/vga/vgaarb.c | 25 +++++++++++++++++++++++++ > 2 files changed, 25 insertions(+), 12 deletions(-) > > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > index 02831a396419..0ac7aa346c69 100644 > --- a/arch/powerpc/kernel/pci-common.c > +++ b/arch/powerpc/kernel/pci-common.c > @@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev) > } > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); > - > -static void fixup_vga(struct pci_dev *pdev) > -{ > - u16 cmd; > - > - pci_read_config_word(pdev, PCI_COMMAND, &cmd); > - if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device()) > - vga_set_default_device(pdev); > - > -} > -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > - PCI_CLASS_DISPLAY_VGA, 8, fixup_vga); > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c > index 76875f6299b8..aeb41f793ed4 100644 > --- a/drivers/gpu/vga/vgaarb.c > +++ b/drivers/gpu/vga/vgaarb.c > @@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void) > vgaarb_info(dev, "no bridge control possible\n"); > } > > + if (!vga_default_device()) { > + list_for_each_entry(vgadev, &vga_list, list) { > + struct device *dev = &vgadev->pdev->dev; > + u16 cmd; > + > + pdev = vgadev->pdev; > + pci_read_config_word(pdev, PCI_COMMAND, &cmd); > + if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > + vga_set_default_device(pdev); > + break; > + } > + } > + } > + > + if (!vga_default_device()) { > + vgadev = list_first_entry_or_null(&vga_list, > + struct vga_device, list); > + if (vgadev) { > + struct device *dev = &vgadev->pdev->dev; > + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > + vga_set_default_device(pdev); Isn't 'pdev' NULL here? shouldn't it be vgadev->pdev instead? Cheers,
Hi, On Thu, 12 Oct 2017 12:24:10 +0100 Julien Thierry wrote: > Hi Bjorn, > > On 06/10/17 23:24, Bjorn Helgaas wrote: > > From: Bjorn Helgaas <bhelgaas@google.com> > > > > Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is > > behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter > > never selects it as the default, which means Xorg auto-detection doesn't > > work. > > > > VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., > > [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are > > not configurable by BARs. Consequently, multiple VGA devices can conflict > > with each other. The VGA arbiter avoids conflicts by ensuring that those > > legacy resources are only routed to one VGA device at a time. > > > > The arbiter identifies the "default VGA" device, i.e., a legacy VGA device > > that was used by boot firmware. It selects the first device that: > > > > - is of PCI_CLASS_DISPLAY_VGA, > > - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and > > - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. > > > > Some systems don't have such a device. For example, if a host bridge > > doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any > > devices below it. Or, as on the HiSilicon D05, the VGA device may be > > behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the > > legacy VGA resources will never reach the device. > > > > This patch extends the arbiter so that if it doesn't find a device that > > meets all the above criteria, it selects the first device that: > > > > - is of PCI_CLASS_DISPLAY_VGA and > > - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled > > > > If it doesn't find even that, it selects the first device that: > > > > - is of class PCI_CLASS_DISPLAY_VGA. > > > > Such a device may not be able to use the legacy VGA resources, but most > > drivers can operate the device without those. Setting it as the default > > device means its "boot_vga" sysfs file will contain "1", which Xorg (via > > libpciaccess) uses to help select its default output device. > > > > This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in > > particular; see the link below). > > > > It also replaces the powerpc fixup_vga() quirk, albeit with slightly > > different semantics: the quirk selected the first VGA device we found, and > > overrode that selection with any enabled VGA device we found. If there > > were several enabled VGA devices, the *last* one we found would become the > > default. > > > > The code here instead selects the *first* enabled VGA device we find, and > > if none are enabled, the first VGA device we find. > > > > Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net > > Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > --- > > arch/powerpc/kernel/pci-common.c | 12 ------------ > > drivers/gpu/vga/vgaarb.c | 25 +++++++++++++++++++++++++ > > 2 files changed, 25 insertions(+), 12 deletions(-) > > > > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > > index 02831a396419..0ac7aa346c69 100644 > > --- a/arch/powerpc/kernel/pci-common.c > > +++ b/arch/powerpc/kernel/pci-common.c > > @@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev) > > } > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); > > - > > -static void fixup_vga(struct pci_dev *pdev) > > -{ > > - u16 cmd; > > - > > - pci_read_config_word(pdev, PCI_COMMAND, &cmd); > > - if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device()) > > - vga_set_default_device(pdev); > > - > > -} > > -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > > - PCI_CLASS_DISPLAY_VGA, 8, fixup_vga); > > diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c > > index 76875f6299b8..aeb41f793ed4 100644 > > --- a/drivers/gpu/vga/vgaarb.c > > +++ b/drivers/gpu/vga/vgaarb.c > > @@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void) > > vgaarb_info(dev, "no bridge control possible\n"); > > } > > > > + if (!vga_default_device()) { > > + list_for_each_entry(vgadev, &vga_list, list) { > > + struct device *dev = &vgadev->pdev->dev; > > + u16 cmd; > > + > > + pdev = vgadev->pdev; > > + pci_read_config_word(pdev, PCI_COMMAND, &cmd); > > + if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > > + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > > + vga_set_default_device(pdev); > > + break; > > + } > > + } > > + } > > + > > + if (!vga_default_device()) { > > + vgadev = list_first_entry_or_null(&vga_list, > > + struct vga_device, list); > > + if (vgadev) { > > + struct device *dev = &vgadev->pdev->dev; > > + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > > + vga_set_default_device(pdev); > > Isn't 'pdev' NULL here? shouldn't it be vgadev->pdev instead? > That cannot not happen, though it isn't quite obvious. 'vgadev' will only be non-NULL, when the vga_list isn't empty and in that case pdev has been set up in the list_for_each_entry() loop above. Lothar Waßmann
On 12/10/17 13:05, Lothar Waßmann wrote: > Hi, > > On Thu, 12 Oct 2017 12:24:10 +0100 Julien Thierry wrote: >> Hi Bjorn, >> >> On 06/10/17 23:24, Bjorn Helgaas wrote: >>> From: Bjorn Helgaas <bhelgaas@google.com> >>> >>> Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is >>> behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter >>> never selects it as the default, which means Xorg auto-detection doesn't >>> work. >>> >>> VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., >>> [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are >>> not configurable by BARs. Consequently, multiple VGA devices can conflict >>> with each other. The VGA arbiter avoids conflicts by ensuring that those >>> legacy resources are only routed to one VGA device at a time. >>> >>> The arbiter identifies the "default VGA" device, i.e., a legacy VGA device >>> that was used by boot firmware. It selects the first device that: >>> >>> - is of PCI_CLASS_DISPLAY_VGA, >>> - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and >>> - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. >>> >>> Some systems don't have such a device. For example, if a host bridge >>> doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any >>> devices below it. Or, as on the HiSilicon D05, the VGA device may be >>> behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the >>> legacy VGA resources will never reach the device. >>> >>> This patch extends the arbiter so that if it doesn't find a device that >>> meets all the above criteria, it selects the first device that: >>> >>> - is of PCI_CLASS_DISPLAY_VGA and >>> - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled >>> >>> If it doesn't find even that, it selects the first device that: >>> >>> - is of class PCI_CLASS_DISPLAY_VGA. >>> >>> Such a device may not be able to use the legacy VGA resources, but most >>> drivers can operate the device without those. Setting it as the default >>> device means its "boot_vga" sysfs file will contain "1", which Xorg (via >>> libpciaccess) uses to help select its default output device. >>> >>> This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in >>> particular; see the link below). >>> >>> It also replaces the powerpc fixup_vga() quirk, albeit with slightly >>> different semantics: the quirk selected the first VGA device we found, and >>> overrode that selection with any enabled VGA device we found. If there >>> were several enabled VGA devices, the *last* one we found would become the >>> default. >>> >>> The code here instead selects the *first* enabled VGA device we find, and >>> if none are enabled, the first VGA device we find. >>> >>> Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net >>> Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg >>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> >>> --- >>> arch/powerpc/kernel/pci-common.c | 12 ------------ >>> drivers/gpu/vga/vgaarb.c | 25 +++++++++++++++++++++++++ >>> 2 files changed, 25 insertions(+), 12 deletions(-) >>> >>> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c >>> index 02831a396419..0ac7aa346c69 100644 >>> --- a/arch/powerpc/kernel/pci-common.c >>> +++ b/arch/powerpc/kernel/pci-common.c >>> @@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev) >>> } >>> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); >>> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); >>> - >>> -static void fixup_vga(struct pci_dev *pdev) >>> -{ >>> - u16 cmd; >>> - >>> - pci_read_config_word(pdev, PCI_COMMAND, &cmd); >>> - if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device()) >>> - vga_set_default_device(pdev); >>> - >>> -} >>> -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, >>> - PCI_CLASS_DISPLAY_VGA, 8, fixup_vga); >>> diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c >>> index 76875f6299b8..aeb41f793ed4 100644 >>> --- a/drivers/gpu/vga/vgaarb.c >>> +++ b/drivers/gpu/vga/vgaarb.c >>> @@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void) >>> vgaarb_info(dev, "no bridge control possible\n"); >>> } >>> >>> + if (!vga_default_device()) { >>> + list_for_each_entry(vgadev, &vga_list, list) { >>> + struct device *dev = &vgadev->pdev->dev; >>> + u16 cmd; >>> + >>> + pdev = vgadev->pdev; >>> + pci_read_config_word(pdev, PCI_COMMAND, &cmd); >>> + if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { >>> + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); >>> + vga_set_default_device(pdev); >>> + break; >>> + } >>> + } >>> + } >>> + >>> + if (!vga_default_device()) { >>> + vgadev = list_first_entry_or_null(&vga_list, >>> + struct vga_device, list); >>> + if (vgadev) { >>> + struct device *dev = &vgadev->pdev->dev; >>> + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); >>> + vga_set_default_device(pdev); >> >> Isn't 'pdev' NULL here? shouldn't it be vgadev->pdev instead? >> > That cannot not happen, though it isn't quite obvious. > 'vgadev' will only be non-NULL, when the vga_list isn't empty and in > that case pdev has been set up in the list_for_each_entry() loop above. > Indeed, it can't be NULL. However, in that case we would be using the pdev from the last vgadev in the list whereas this last case suggest we are picking the first vgadev in the list. So I don't understand why 'pdev' is being used rather than 'vgadev-pdev'. Thanks,
On Thu, Oct 12, 2017 at 12:24:10PM +0100, Julien Thierry wrote: > Hi Bjorn, > > On 06/10/17 23:24, Bjorn Helgaas wrote: > >From: Bjorn Helgaas <bhelgaas@google.com> > > > >Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is > >behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter > >never selects it as the default, which means Xorg auto-detection doesn't > >work. > > > >VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g., > >[mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are > >not configurable by BARs. Consequently, multiple VGA devices can conflict > >with each other. The VGA arbiter avoids conflicts by ensuring that those > >legacy resources are only routed to one VGA device at a time. > > > >The arbiter identifies the "default VGA" device, i.e., a legacy VGA device > >that was used by boot firmware. It selects the first device that: > > > > - is of PCI_CLASS_DISPLAY_VGA, > > - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and > > - has PCI_BRIDGE_CTL_VGA set in all upstream bridges. > > > >Some systems don't have such a device. For example, if a host bridge > >doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any > >devices below it. Or, as on the HiSilicon D05, the VGA device may be > >behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the > >legacy VGA resources will never reach the device. > > > >This patch extends the arbiter so that if it doesn't find a device that > >meets all the above criteria, it selects the first device that: > > > > - is of PCI_CLASS_DISPLAY_VGA and > > - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled > > > >If it doesn't find even that, it selects the first device that: > > > > - is of class PCI_CLASS_DISPLAY_VGA. > > > >Such a device may not be able to use the legacy VGA resources, but most > >drivers can operate the device without those. Setting it as the default > >device means its "boot_vga" sysfs file will contain "1", which Xorg (via > >libpciaccess) uses to help select its default output device. > > > >This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in > >particular; see the link below). > > > >It also replaces the powerpc fixup_vga() quirk, albeit with slightly > >different semantics: the quirk selected the first VGA device we found, and > >overrode that selection with any enabled VGA device we found. If there > >were several enabled VGA devices, the *last* one we found would become the > >default. > > > >The code here instead selects the *first* enabled VGA device we find, and > >if none are enabled, the first VGA device we find. > > > >Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net > >Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg > >Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > >--- > > arch/powerpc/kernel/pci-common.c | 12 ------------ > > drivers/gpu/vga/vgaarb.c | 25 +++++++++++++++++++++++++ > > 2 files changed, 25 insertions(+), 12 deletions(-) > > > >diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > >index 02831a396419..0ac7aa346c69 100644 > >--- a/arch/powerpc/kernel/pci-common.c > >+++ b/arch/powerpc/kernel/pci-common.c > >@@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev) > > } > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); > >- > >-static void fixup_vga(struct pci_dev *pdev) > >-{ > >- u16 cmd; > >- > >- pci_read_config_word(pdev, PCI_COMMAND, &cmd); > >- if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device()) > >- vga_set_default_device(pdev); > >- > >-} > >-DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, > >- PCI_CLASS_DISPLAY_VGA, 8, fixup_vga); > >diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c > >index 76875f6299b8..aeb41f793ed4 100644 > >--- a/drivers/gpu/vga/vgaarb.c > >+++ b/drivers/gpu/vga/vgaarb.c > >@@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void) > > vgaarb_info(dev, "no bridge control possible\n"); > > } > >+ if (!vga_default_device()) { > >+ list_for_each_entry(vgadev, &vga_list, list) { > >+ struct device *dev = &vgadev->pdev->dev; > >+ u16 cmd; > >+ > >+ pdev = vgadev->pdev; > >+ pci_read_config_word(pdev, PCI_COMMAND, &cmd); > >+ if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { > >+ vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > >+ vga_set_default_device(pdev); > >+ break; > >+ } > >+ } > >+ } > >+ > >+ if (!vga_default_device()) { > >+ vgadev = list_first_entry_or_null(&vga_list, > >+ struct vga_device, list); > >+ if (vgadev) { > >+ struct device *dev = &vgadev->pdev->dev; > >+ vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); > >+ vga_set_default_device(pdev); > > Isn't 'pdev' NULL here? shouldn't it be vgadev->pdev instead? Yes, vgadev->pdev is what I intended, thanks a lot for pointing that out! Bjorn
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 02831a396419..0ac7aa346c69 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl); - -static void fixup_vga(struct pci_dev *pdev) -{ - u16 cmd; - - pci_read_config_word(pdev, PCI_COMMAND, &cmd); - if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device()) - vga_set_default_device(pdev); - -} -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_DISPLAY_VGA, 8, fixup_vga); diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 76875f6299b8..aeb41f793ed4 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void) vgaarb_info(dev, "no bridge control possible\n"); } + if (!vga_default_device()) { + list_for_each_entry(vgadev, &vga_list, list) { + struct device *dev = &vgadev->pdev->dev; + u16 cmd; + + pdev = vgadev->pdev; + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); + vga_set_default_device(pdev); + break; + } + } + } + + if (!vga_default_device()) { + vgadev = list_first_entry_or_null(&vga_list, + struct vga_device, list); + if (vgadev) { + struct device *dev = &vgadev->pdev->dev; + vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n"); + vga_set_default_device(pdev); + } + } + pr_info("loaded\n"); return rc; }