diff mbox

[V6,1/5] mac80211: Enable TDLS peer buffer STA feature

Message ID 1508133633-23214-2-git-send-email-yintang@qti.qualcomm.com (mailing list archive)
State New, archived
Headers show

Commit Message

yintang@qti.qualcomm.com Oct. 16, 2017, 6 a.m. UTC 
From: Yingying Tang <yintang@qti.qualcomm.com>

Enable TDLS peer buffer STA feature.
Set extended capability bit to enable buffer STA when driver
support it.

Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
---
 include/net/mac80211.h |    4 ++++
 net/mac80211/tdls.c    |    5 ++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

Comments

Johannes Berg Oct. 18, 2017, 10:35 a.m. UTC | #1 
On Mon, 2017-10-16 at 14:00 +0800, yintang@qti.qualcomm.com wrote:
> From: Yingying Tang <yintang@qti.qualcomm.com>
> 
> Enable TDLS peer buffer STA feature.
> Set extended capability bit to enable buffer STA when driver
> support it.

It would help if you could (build) test your changes :-)

johannes
yintang@qti.qualcomm.com Oct. 20, 2017, 3:34 a.m. UTC | #2 
Hi Johannes,

I have built and tested it, it can work

-----Original Message-----
From: Johannes Berg [mailto:johannes@sipsolutions.net] 
Sent: Wednesday, October 18, 2017 6:36 PM
To: Yingying Tang <yintang@qti.qualcomm.com>; ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH V6 1/5] mac80211: Enable TDLS peer buffer STA feature

On Mon, 2017-10-16 at 14:00 +0800, yintang@qti.qualcomm.com wrote:
> From: Yingying Tang <yintang@qti.qualcomm.com>
> 
> Enable TDLS peer buffer STA feature.
> Set extended capability bit to enable buffer STA when driver support 
> it.

It would help if you could (build) test your changes :-)

johannes
Johannes Berg Oct. 23, 2017, 6:29 a.m. UTC | #3 
On Fri, 2017-10-20 at 03:34 +0000, Yingying Tang wrote:
> Hi Johannes,
> 
> I have built and tested it, it can work

No, you haven't, at least not comprehensively. Try to enable debugfs.

johannes
diff mbox

Patch

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f8149ca..5928123 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2067,6 +2067,9 @@  struct ieee80211_txq {
  *	The stack will not do fragmentation.
  *	The callback for @set_frag_threshold should be set as well.
  *
+ * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware support buffer STA when
+ *	TDLS is established.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2109,6 +2112,7 @@  enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_FRAG_LIST,
 	IEEE80211_HW_REPORTS_LOW_ACK,
 	IEEE80211_HW_SUPPORTS_TX_FRAG,
+	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index 91093d4..8231466 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -47,6 +47,8 @@  static void ieee80211_tdls_add_ext_capab(struct ieee80211_sub_if_data *sdata,
 			   NL80211_FEATURE_TDLS_CHANNEL_SWITCH;
 	bool wider_band = ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) &&
 			  !ifmgd->tdls_wider_bw_prohibited;
+	bool buffer_sta = ieee80211_hw_check(&local->hw,
+					     SUPPORTS_TDLS_BUFFER_STA);
 	struct ieee80211_supported_band *sband = ieee80211_get_sband(sdata);
 	bool vht = sband && sband->vht_cap.vht_supported;
 	u8 *pos = skb_put(skb, 10);
@@ -56,7 +58,8 @@  static void ieee80211_tdls_add_ext_capab(struct ieee80211_sub_if_data *sdata,
 	*pos++ = 0x0;
 	*pos++ = 0x0;
 	*pos++ = 0x0;
-	*pos++ = chan_switch ? WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH : 0;
+	*pos++ = (chan_switch ? WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH : 0) |
+		 (buffer_sta ? WLAN_EXT_CAPA4_TDLS_BUFFER_STA : 0);
 	*pos++ = WLAN_EXT_CAPA5_TDLS_ENABLED;
 	*pos++ = 0;
 	*pos++ = 0;