Message ID | 11013815.Nxk07oyMGD@aspire.rjw.lan (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
On Thu, Oct 19, 2017 at 01:17:31AM +0200, Rafael J. Wysocki wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The motivation for this change is to provide a way to work around > a problem with the direct-complete mechanism used for avoiding > system suspend/resume handling for devices in runtime suspend. > > The problem is that some middle layer code (the PCI bus type and > the ACPI PM domain in particular) returns positive values from its > system suspend ->prepare callbacks regardless of whether the driver's > ->prepare returns a positive value or 0, which effectively prevents > drivers from being able to control the direct-complete feature. > Some drivers need that control, however, and the PCI bus type has > grown its own flag to deal with this issue, but since it is not > limited to PCI, it is better to address it by adding driver flags at > the core level. > > To that end, add a driver_flags field to struct dev_pm_info for flags > that can be set by device drivers at the probe time to inform the PM > core and/or bus types, PM domains and so on on the capabilities and/or > preferences of device drivers. Also add two static inline helpers > for setting that field and testing it against a given set of flags > and make the driver core clear it automatically on driver remove > and probe failures. > > Define and document two PM driver flags related to the direct- > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > respectively, to indicate to the PM core that the direct-complete > mechanism should never be used for the device and to inform the > middle layer code (bus types, PM domains etc) that it can only > request the PM core to use the direct-complete mechanism for > the device (by returning a positive value from its ->prepare > callback) if it also has been requested by the driver. > > While at it, make the core check pm_runtime_suspended() when > setting power.direct_complete so that it doesn't need to be > checked by ->prepare callbacks. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Thursday, October 19, 2017 9:33:15 AM CEST Greg Kroah-Hartman wrote: > On Thu, Oct 19, 2017 at 01:17:31AM +0200, Rafael J. Wysocki wrote: > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > The motivation for this change is to provide a way to work around > > a problem with the direct-complete mechanism used for avoiding > > system suspend/resume handling for devices in runtime suspend. > > > > The problem is that some middle layer code (the PCI bus type and > > the ACPI PM domain in particular) returns positive values from its > > system suspend ->prepare callbacks regardless of whether the driver's > > ->prepare returns a positive value or 0, which effectively prevents > > drivers from being able to control the direct-complete feature. > > Some drivers need that control, however, and the PCI bus type has > > grown its own flag to deal with this issue, but since it is not > > limited to PCI, it is better to address it by adding driver flags at > > the core level. > > > > To that end, add a driver_flags field to struct dev_pm_info for flags > > that can be set by device drivers at the probe time to inform the PM > > core and/or bus types, PM domains and so on on the capabilities and/or > > preferences of device drivers. Also add two static inline helpers > > for setting that field and testing it against a given set of flags > > and make the driver core clear it automatically on driver remove > > and probe failures. > > > > Define and document two PM driver flags related to the direct- > > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > > respectively, to indicate to the PM core that the direct-complete > > mechanism should never be used for the device and to inform the > > middle layer code (bus types, PM domains etc) that it can only > > request the PM core to use the direct-complete mechanism for > > the device (by returning a positive value from its ->prepare > > callback) if it also has been requested by the driver. > > > > While at it, make the core check pm_runtime_suspended() when > > setting power.direct_complete so that it doesn't need to be > > checked by ->prepare callbacks. > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Thanks! Does it also apply to the other patches in the series? I'd like to queue up the core patches for 4.15 as they are specifically designed to only affect the drivers that actually set the flags, so there shouldn't be any regression resulting from them, and I'd like to be able to start using the flags in drivers going forward. Thanks, Rafael
On Friday, October 20, 2017 1:35:27 PM CEST Greg Kroah-Hartman wrote: > On Fri, Oct 20, 2017 at 01:11:22PM +0200, Rafael J. Wysocki wrote: > > On Thursday, October 19, 2017 9:33:15 AM CEST Greg Kroah-Hartman wrote: > > > On Thu, Oct 19, 2017 at 01:17:31AM +0200, Rafael J. Wysocki wrote: > > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > > > > > The motivation for this change is to provide a way to work around > > > > a problem with the direct-complete mechanism used for avoiding > > > > system suspend/resume handling for devices in runtime suspend. > > > > > > > > The problem is that some middle layer code (the PCI bus type and > > > > the ACPI PM domain in particular) returns positive values from its > > > > system suspend ->prepare callbacks regardless of whether the driver's > > > > ->prepare returns a positive value or 0, which effectively prevents > > > > drivers from being able to control the direct-complete feature. > > > > Some drivers need that control, however, and the PCI bus type has > > > > grown its own flag to deal with this issue, but since it is not > > > > limited to PCI, it is better to address it by adding driver flags at > > > > the core level. > > > > > > > > To that end, add a driver_flags field to struct dev_pm_info for flags > > > > that can be set by device drivers at the probe time to inform the PM > > > > core and/or bus types, PM domains and so on on the capabilities and/or > > > > preferences of device drivers. Also add two static inline helpers > > > > for setting that field and testing it against a given set of flags > > > > and make the driver core clear it automatically on driver remove > > > > and probe failures. > > > > > > > > Define and document two PM driver flags related to the direct- > > > > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > > > > respectively, to indicate to the PM core that the direct-complete > > > > mechanism should never be used for the device and to inform the > > > > middle layer code (bus types, PM domains etc) that it can only > > > > request the PM core to use the direct-complete mechanism for > > > > the device (by returning a positive value from its ->prepare > > > > callback) if it also has been requested by the driver. > > > > > > > > While at it, make the core check pm_runtime_suspended() when > > > > setting power.direct_complete so that it doesn't need to be > > > > checked by ->prepare callbacks. > > > > > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > > > Thanks! > > > > Does it also apply to the other patches in the series? > > > > I'd like to queue up the core patches for 4.15 as they are specifically > > designed to only affect the drivers that actually set the flags, so there > > shouldn't be any regression resulting from them, and I'd like to be > > able to start using the flags in drivers going forward. > > Yes, sorry, I thought I acked them, but you are right, I didn't: > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > for all of them please. Thanks!
On Fri, Oct 20, 2017 at 01:11:22PM +0200, Rafael J. Wysocki wrote: > On Thursday, October 19, 2017 9:33:15 AM CEST Greg Kroah-Hartman wrote: > > On Thu, Oct 19, 2017 at 01:17:31AM +0200, Rafael J. Wysocki wrote: > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > > > The motivation for this change is to provide a way to work around > > > a problem with the direct-complete mechanism used for avoiding > > > system suspend/resume handling for devices in runtime suspend. > > > > > > The problem is that some middle layer code (the PCI bus type and > > > the ACPI PM domain in particular) returns positive values from its > > > system suspend ->prepare callbacks regardless of whether the driver's > > > ->prepare returns a positive value or 0, which effectively prevents > > > drivers from being able to control the direct-complete feature. > > > Some drivers need that control, however, and the PCI bus type has > > > grown its own flag to deal with this issue, but since it is not > > > limited to PCI, it is better to address it by adding driver flags at > > > the core level. > > > > > > To that end, add a driver_flags field to struct dev_pm_info for flags > > > that can be set by device drivers at the probe time to inform the PM > > > core and/or bus types, PM domains and so on on the capabilities and/or > > > preferences of device drivers. Also add two static inline helpers > > > for setting that field and testing it against a given set of flags > > > and make the driver core clear it automatically on driver remove > > > and probe failures. > > > > > > Define and document two PM driver flags related to the direct- > > > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > > > respectively, to indicate to the PM core that the direct-complete > > > mechanism should never be used for the device and to inform the > > > middle layer code (bus types, PM domains etc) that it can only > > > request the PM core to use the direct-complete mechanism for > > > the device (by returning a positive value from its ->prepare > > > callback) if it also has been requested by the driver. > > > > > > While at it, make the core check pm_runtime_suspended() when > > > setting power.direct_complete so that it doesn't need to be > > > checked by ->prepare callbacks. > > > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Thanks! > > Does it also apply to the other patches in the series? > > I'd like to queue up the core patches for 4.15 as they are specifically > designed to only affect the drivers that actually set the flags, so there > shouldn't be any regression resulting from them, and I'd like to be > able to start using the flags in drivers going forward. Yes, sorry, I thought I acked them, but you are right, I didn't: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> for all of them please. thanks, greg k-h
On 19 October 2017 at 01:17, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > The motivation for this change is to provide a way to work around > a problem with the direct-complete mechanism used for avoiding > system suspend/resume handling for devices in runtime suspend. > > The problem is that some middle layer code (the PCI bus type and > the ACPI PM domain in particular) returns positive values from its > system suspend ->prepare callbacks regardless of whether the driver's > ->prepare returns a positive value or 0, which effectively prevents > drivers from being able to control the direct-complete feature. > Some drivers need that control, however, and the PCI bus type has > grown its own flag to deal with this issue, but since it is not > limited to PCI, it is better to address it by adding driver flags at > the core level. > > To that end, add a driver_flags field to struct dev_pm_info for flags > that can be set by device drivers at the probe time to inform the PM > core and/or bus types, PM domains and so on on the capabilities and/or > preferences of device drivers. Also add two static inline helpers > for setting that field and testing it against a given set of flags > and make the driver core clear it automatically on driver remove > and probe failures. > > Define and document two PM driver flags related to the direct- > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > respectively, to indicate to the PM core that the direct-complete > mechanism should never be used for the device and to inform the > middle layer code (bus types, PM domains etc) that it can only > request the PM core to use the direct-complete mechanism for > the device (by returning a positive value from its ->prepare > callback) if it also has been requested by the driver. > > While at it, make the core check pm_runtime_suspended() when > setting power.direct_complete so that it doesn't need to be > checked by ->prepare callbacks. > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > > -> v2: Change the data type for driver_flags to u32 as suggested by Greg > and fix a couple of documentation typos pointed out by Lukas. > > --- > Documentation/driver-api/pm/devices.rst | 14 ++++++++++++++ > Documentation/power/pci.txt | 19 +++++++++++++++++++ > drivers/acpi/device_pm.c | 3 +++ > drivers/base/dd.c | 2 ++ > drivers/base/power/main.c | 4 +++- > drivers/pci/pci-driver.c | 5 ++++- > include/linux/device.h | 10 ++++++++++ > include/linux/pm.h | 20 ++++++++++++++++++++ > 8 files changed, 75 insertions(+), 2 deletions(-) > > Index: linux-pm/include/linux/device.h > =================================================================== > --- linux-pm.orig/include/linux/device.h > +++ linux-pm/include/linux/device.h > @@ -1070,6 +1070,16 @@ static inline void dev_pm_syscore_device > #endif > } > > +static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) > +{ > + dev->power.driver_flags = flags; > +} > + > +static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) > +{ > + return !!(dev->power.driver_flags & flags); > +} > + > static inline void device_lock(struct device *dev) > { > mutex_lock(&dev->mutex); > Index: linux-pm/include/linux/pm.h > =================================================================== > --- linux-pm.orig/include/linux/pm.h > +++ linux-pm/include/linux/pm.h > @@ -550,6 +550,25 @@ struct pm_subsys_data { > #endif > }; > > +/* > + * Driver flags to control system suspend/resume behavior. > + * > + * These flags can be set by device drivers at the probe time. They need not be > + * cleared by the drivers as the driver core will take care of that. > + * > + * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. > + * SMART_PREPARE: Check the return value of the driver's ->prepare callback. > + * > + * Setting SMART_PREPARE instructs bus types and PM domains which may want > + * system suspend/resume callbacks to be skipped for the device to return 0 from > + * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in > + * other words, the system suspend/resume callbacks can only be skipped for the > + * device if its driver doesn't object against that). This flag has no effect > + * if NEVER_SKIP is set. In principle ACPI/PCI middle-layer/PM domain could have started out by respecting the return values from driver's ->prepare() callbacks in case those existed, but they didn't, and that is the reason to why the SMART_PREPARE is needed. Right? My point is, I don't think we should encourage other middle-layer to support the SMART_PREPARE flag, simply because they should be able to cope without it. To make this more obvious we could try to find a different name of the flag indicating that, or at least make it clear that we don't want it to be used by others than ACPI/PCI via documenting that. > + */ > +#define DPM_FLAG_NEVER_SKIP BIT(0) > +#define DPM_FLAG_SMART_PREPARE BIT(1) > + > struct dev_pm_info { > pm_message_t power_state; > unsigned int can_wakeup:1; > @@ -561,6 +580,7 @@ struct dev_pm_info { > bool is_late_suspended:1; > bool early_init:1; /* Owned by the PM core */ > bool direct_complete:1; /* Owned by the PM core */ > + u32 driver_flags; > spinlock_t lock; > #ifdef CONFIG_PM_SLEEP > struct list_head entry; > Index: linux-pm/drivers/base/dd.c > =================================================================== > --- linux-pm.orig/drivers/base/dd.c > +++ linux-pm/drivers/base/dd.c > @@ -464,6 +464,7 @@ pinctrl_bind_failed: > if (dev->pm_domain && dev->pm_domain->dismiss) > dev->pm_domain->dismiss(dev); > pm_runtime_reinit(dev); > + dev_pm_set_driver_flags(dev, 0); > > switch (ret) { > case -EPROBE_DEFER: > @@ -869,6 +870,7 @@ static void __device_release_driver(stru > if (dev->pm_domain && dev->pm_domain->dismiss) > dev->pm_domain->dismiss(dev); > pm_runtime_reinit(dev); > + dev_pm_set_driver_flags(dev, 0); > > klist_remove(&dev->p->knode_driver); > device_pm_check_callbacks(dev); > Index: linux-pm/drivers/base/power/main.c > =================================================================== > --- linux-pm.orig/drivers/base/power/main.c > +++ linux-pm/drivers/base/power/main.c > @@ -1700,7 +1700,9 @@ unlock: > * applies to suspend transitions, however. > */ > spin_lock_irq(&dev->power.lock); > - dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND; > + dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && > + pm_runtime_suspended(dev) && ret > 0 && > + !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); > spin_unlock_irq(&dev->power.lock); > return 0; > } > Index: linux-pm/drivers/pci/pci-driver.c > =================================================================== > --- linux-pm.orig/drivers/pci/pci-driver.c > +++ linux-pm/drivers/pci/pci-driver.c > @@ -682,8 +682,11 @@ static int pci_pm_prepare(struct device > > if (drv && drv->pm && drv->pm->prepare) { > int error = drv->pm->prepare(dev); > - if (error) > + if (error < 0) > return error; > + > + if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > + return 0; > } > return pci_dev_keep_suspended(to_pci_dev(dev)); > } > Index: linux-pm/drivers/acpi/device_pm.c > =================================================================== > --- linux-pm.orig/drivers/acpi/device_pm.c > +++ linux-pm/drivers/acpi/device_pm.c > @@ -965,6 +965,9 @@ int acpi_subsys_prepare(struct device *d > if (ret < 0) > return ret; > > + if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > + return 0; So if the driver don't implement the ->prepare() callback, you still want to treat this flag as it has one assigned and that it returns 0? It seems not entirely according to what you have documented about the flag. > + > if (!adev || !pm_runtime_suspended(dev)) > return 0; > > Index: linux-pm/Documentation/driver-api/pm/devices.rst > =================================================================== > --- linux-pm.orig/Documentation/driver-api/pm/devices.rst > +++ linux-pm/Documentation/driver-api/pm/devices.rst > @@ -354,6 +354,20 @@ the phases are: ``prepare``, ``suspend`` > is because all such devices are initially set to runtime-suspended with > runtime PM disabled. > > + This feature also can be controlled by device drivers by using the > + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power > + management flags. [Typically, they are set at the time the driver is > + probed against the device in question by passing them to the > + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of > + these flags is set, the PM core will not apply the direct-complete > + procedure described above to the given device and, consequenty, to any > + of its ancestors. The second flag, when set, informs the middle layer > + code (bus types, device types, PM domains, classes) that it should take > + the return value of the ``->prepare`` callback provided by the driver > + into account and it may only return a positive value from its own > + ``->prepare`` callback if the driver's one also has returned a positive > + value. > + > 2. The ``->suspend`` methods should quiesce the device to stop it from > performing I/O. They also may save the device registers and put it into > the appropriate low-power state, depending on the bus type the device is > Index: linux-pm/Documentation/power/pci.txt > =================================================================== > --- linux-pm.orig/Documentation/power/pci.txt > +++ linux-pm/Documentation/power/pci.txt > @@ -961,6 +961,25 @@ dev_pm_ops to indicate that one suspend > .suspend(), .freeze(), and .poweroff() members and one resume routine is to > be pointed to by the .resume(), .thaw(), and .restore() members. > > +3.1.19. Driver Flags for Power Management > + > +The PM core allows device drivers to set flags that influence the handling of > +power management for the devices by the core itself and by middle layer code > +including the PCI bus type. The flags should be set once at the driver probe > +time with the help of the dev_pm_set_driver_flags() function and they should not > +be updated directly afterwards. I am wondering if we really need to make a statement generic to all "driver PM flags" that these flags must be set at ->probe(). Maybe that is better documented per flag, rather than for all. The reason why I bring it up, is that I would not be surprised if a new flag comes a long and which may be used a bit differently, not requiring that. Of course we can also update that later on, if needed. > + > +The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete > +mechanism allowing device suspend/resume callbacks to be skipped if the device > +is in runtime suspend when the system suspend starts. That also affects all of > +the ancestors of the device, so this flag should only be used if absolutely > +necessary. > + > +The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a > +positive value from pci_pm_prepare() if the ->prepare callback provided by the > +driver of the device returns a positive value. That allows the driver to opt > +out from using the direct-complete mechanism dynamically. > + > 3.2. Device Runtime Power Management > ------------------------------------ > In addition to providing device power management callbacks PCI device drivers > Kind regards Uffe
On Monday, October 23, 2017 6:37:41 PM CEST Ulf Hansson wrote: > On 19 October 2017 at 01:17, Rafael J. Wysocki <rjw@rjwysocki.net> wrote: > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > The motivation for this change is to provide a way to work around > > a problem with the direct-complete mechanism used for avoiding > > system suspend/resume handling for devices in runtime suspend. > > > > The problem is that some middle layer code (the PCI bus type and > > the ACPI PM domain in particular) returns positive values from its > > system suspend ->prepare callbacks regardless of whether the driver's > > ->prepare returns a positive value or 0, which effectively prevents > > drivers from being able to control the direct-complete feature. > > Some drivers need that control, however, and the PCI bus type has > > grown its own flag to deal with this issue, but since it is not > > limited to PCI, it is better to address it by adding driver flags at > > the core level. > > > > To that end, add a driver_flags field to struct dev_pm_info for flags > > that can be set by device drivers at the probe time to inform the PM > > core and/or bus types, PM domains and so on on the capabilities and/or > > preferences of device drivers. Also add two static inline helpers > > for setting that field and testing it against a given set of flags > > and make the driver core clear it automatically on driver remove > > and probe failures. > > > > Define and document two PM driver flags related to the direct- > > complete feature: NEVER_SKIP and SMART_PREPARE that can be used, > > respectively, to indicate to the PM core that the direct-complete > > mechanism should never be used for the device and to inform the > > middle layer code (bus types, PM domains etc) that it can only > > request the PM core to use the direct-complete mechanism for > > the device (by returning a positive value from its ->prepare > > callback) if it also has been requested by the driver. > > > > While at it, make the core check pm_runtime_suspended() when > > setting power.direct_complete so that it doesn't need to be > > checked by ->prepare callbacks. > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > --- > > > > -> v2: Change the data type for driver_flags to u32 as suggested by Greg > > and fix a couple of documentation typos pointed out by Lukas. > > > > --- > > Documentation/driver-api/pm/devices.rst | 14 ++++++++++++++ > > Documentation/power/pci.txt | 19 +++++++++++++++++++ > > drivers/acpi/device_pm.c | 3 +++ > > drivers/base/dd.c | 2 ++ > > drivers/base/power/main.c | 4 +++- > > drivers/pci/pci-driver.c | 5 ++++- > > include/linux/device.h | 10 ++++++++++ > > include/linux/pm.h | 20 ++++++++++++++++++++ > > 8 files changed, 75 insertions(+), 2 deletions(-) > > > > Index: linux-pm/include/linux/device.h > > =================================================================== > > --- linux-pm.orig/include/linux/device.h > > +++ linux-pm/include/linux/device.h > > @@ -1070,6 +1070,16 @@ static inline void dev_pm_syscore_device > > #endif > > } > > > > +static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) > > +{ > > + dev->power.driver_flags = flags; > > +} > > + > > +static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) > > +{ > > + return !!(dev->power.driver_flags & flags); > > +} > > + > > static inline void device_lock(struct device *dev) > > { > > mutex_lock(&dev->mutex); > > Index: linux-pm/include/linux/pm.h > > =================================================================== > > --- linux-pm.orig/include/linux/pm.h > > +++ linux-pm/include/linux/pm.h > > @@ -550,6 +550,25 @@ struct pm_subsys_data { > > #endif > > }; > > > > +/* > > + * Driver flags to control system suspend/resume behavior. > > + * > > + * These flags can be set by device drivers at the probe time. They need not be > > + * cleared by the drivers as the driver core will take care of that. > > + * > > + * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. > > + * SMART_PREPARE: Check the return value of the driver's ->prepare callback. > > + * > > + * Setting SMART_PREPARE instructs bus types and PM domains which may want > > + * system suspend/resume callbacks to be skipped for the device to return 0 from > > + * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in > > + * other words, the system suspend/resume callbacks can only be skipped for the > > + * device if its driver doesn't object against that). This flag has no effect > > + * if NEVER_SKIP is set. > > In principle ACPI/PCI middle-layer/PM domain could have started out by > respecting the return values from driver's ->prepare() callbacks in > case those existed, but they didn't, and that is the reason to why the > SMART_PREPARE is needed. Right? > > My point is, I don't think we should encourage other middle-layer to > support the SMART_PREPARE flag, simply because they should be able to > cope without it. To make this more obvious we could try to find a > different name of the flag indicating that, or at least make it clear > that we don't want it to be used by others than ACPI/PCI via > documenting that. I want it to be generic, though, so setting it should not be treated as a mistake in any case (for example, because some drivers interact with the ACPI PM domain and with some other middle layers). If SMART_PREPARE simply overlaps with your defaul behavior, there's no need to check the flag, but then it can be set really safely. :-) > > + */ > > +#define DPM_FLAG_NEVER_SKIP BIT(0) > > +#define DPM_FLAG_SMART_PREPARE BIT(1) > > + > > struct dev_pm_info { > > pm_message_t power_state; > > unsigned int can_wakeup:1; > > @@ -561,6 +580,7 @@ struct dev_pm_info { > > bool is_late_suspended:1; > > bool early_init:1; /* Owned by the PM core */ > > bool direct_complete:1; /* Owned by the PM core */ > > + u32 driver_flags; > > spinlock_t lock; > > #ifdef CONFIG_PM_SLEEP > > struct list_head entry; > > Index: linux-pm/drivers/base/dd.c > > =================================================================== > > --- linux-pm.orig/drivers/base/dd.c > > +++ linux-pm/drivers/base/dd.c > > @@ -464,6 +464,7 @@ pinctrl_bind_failed: > > if (dev->pm_domain && dev->pm_domain->dismiss) > > dev->pm_domain->dismiss(dev); > > pm_runtime_reinit(dev); > > + dev_pm_set_driver_flags(dev, 0); > > > > switch (ret) { > > case -EPROBE_DEFER: > > @@ -869,6 +870,7 @@ static void __device_release_driver(stru > > if (dev->pm_domain && dev->pm_domain->dismiss) > > dev->pm_domain->dismiss(dev); > > pm_runtime_reinit(dev); > > + dev_pm_set_driver_flags(dev, 0); > > > > klist_remove(&dev->p->knode_driver); > > device_pm_check_callbacks(dev); > > Index: linux-pm/drivers/base/power/main.c > > =================================================================== > > --- linux-pm.orig/drivers/base/power/main.c > > +++ linux-pm/drivers/base/power/main.c > > @@ -1700,7 +1700,9 @@ unlock: > > * applies to suspend transitions, however. > > */ > > spin_lock_irq(&dev->power.lock); > > - dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND; > > + dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && > > + pm_runtime_suspended(dev) && ret > 0 && > > + !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); > > spin_unlock_irq(&dev->power.lock); > > return 0; > > } > > Index: linux-pm/drivers/pci/pci-driver.c > > =================================================================== > > --- linux-pm.orig/drivers/pci/pci-driver.c > > +++ linux-pm/drivers/pci/pci-driver.c > > @@ -682,8 +682,11 @@ static int pci_pm_prepare(struct device > > > > if (drv && drv->pm && drv->pm->prepare) { > > int error = drv->pm->prepare(dev); > > - if (error) > > + if (error < 0) > > return error; > > + > > + if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > > + return 0; > > } > > return pci_dev_keep_suspended(to_pci_dev(dev)); > > } > > Index: linux-pm/drivers/acpi/device_pm.c > > =================================================================== > > --- linux-pm.orig/drivers/acpi/device_pm.c > > +++ linux-pm/drivers/acpi/device_pm.c > > @@ -965,6 +965,9 @@ int acpi_subsys_prepare(struct device *d > > if (ret < 0) > > return ret; > > > > + if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) > > + return 0; > > So if the driver don't implement the ->prepare() callback, you still > want to treat this flag as it has one assigned and that it returns 0? > > It seems not entirely according to what you have documented about the flag. You are right, I just should not use the _generic_prepare() thing there. I'll send a fix patch for that. > > + > > if (!adev || !pm_runtime_suspended(dev)) > > return 0; > > > > Index: linux-pm/Documentation/driver-api/pm/devices.rst > > =================================================================== > > --- linux-pm.orig/Documentation/driver-api/pm/devices.rst > > +++ linux-pm/Documentation/driver-api/pm/devices.rst > > @@ -354,6 +354,20 @@ the phases are: ``prepare``, ``suspend`` > > is because all such devices are initially set to runtime-suspended with > > runtime PM disabled. > > > > + This feature also can be controlled by device drivers by using the > > + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power > > + management flags. [Typically, they are set at the time the driver is > > + probed against the device in question by passing them to the > > + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of > > + these flags is set, the PM core will not apply the direct-complete > > + procedure described above to the given device and, consequenty, to any > > + of its ancestors. The second flag, when set, informs the middle layer > > + code (bus types, device types, PM domains, classes) that it should take > > + the return value of the ``->prepare`` callback provided by the driver > > + into account and it may only return a positive value from its own > > + ``->prepare`` callback if the driver's one also has returned a positive > > + value. > > + > > 2. The ``->suspend`` methods should quiesce the device to stop it from > > performing I/O. They also may save the device registers and put it into > > the appropriate low-power state, depending on the bus type the device is > > Index: linux-pm/Documentation/power/pci.txt > > =================================================================== > > --- linux-pm.orig/Documentation/power/pci.txt > > +++ linux-pm/Documentation/power/pci.txt > > @@ -961,6 +961,25 @@ dev_pm_ops to indicate that one suspend > > .suspend(), .freeze(), and .poweroff() members and one resume routine is to > > be pointed to by the .resume(), .thaw(), and .restore() members. > > > > +3.1.19. Driver Flags for Power Management > > + > > +The PM core allows device drivers to set flags that influence the handling of > > +power management for the devices by the core itself and by middle layer code > > +including the PCI bus type. The flags should be set once at the driver probe > > +time with the help of the dev_pm_set_driver_flags() function and they should not > > +be updated directly afterwards. > > I am wondering if we really need to make a statement generic to all > "driver PM flags" that these flags must be set at ->probe(). Maybe > that is better documented per flag, rather than for all. The reason > why I bring it up, is that I would not be surprised if a new flag > comes a long and which may be used a bit differently, not requiring > that. > > Of course we can also update that later on, if needed. Right. Thanks, Rafael
Index: linux-pm/include/linux/device.h =================================================================== --- linux-pm.orig/include/linux/device.h +++ linux-pm/include/linux/device.h @@ -1070,6 +1070,16 @@ static inline void dev_pm_syscore_device #endif } +static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags) +{ + dev->power.driver_flags = flags; +} + +static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags) +{ + return !!(dev->power.driver_flags & flags); +} + static inline void device_lock(struct device *dev) { mutex_lock(&dev->mutex); Index: linux-pm/include/linux/pm.h =================================================================== --- linux-pm.orig/include/linux/pm.h +++ linux-pm/include/linux/pm.h @@ -550,6 +550,25 @@ struct pm_subsys_data { #endif }; +/* + * Driver flags to control system suspend/resume behavior. + * + * These flags can be set by device drivers at the probe time. They need not be + * cleared by the drivers as the driver core will take care of that. + * + * NEVER_SKIP: Do not skip system suspend/resume callbacks for the device. + * SMART_PREPARE: Check the return value of the driver's ->prepare callback. + * + * Setting SMART_PREPARE instructs bus types and PM domains which may want + * system suspend/resume callbacks to be skipped for the device to return 0 from + * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in + * other words, the system suspend/resume callbacks can only be skipped for the + * device if its driver doesn't object against that). This flag has no effect + * if NEVER_SKIP is set. + */ +#define DPM_FLAG_NEVER_SKIP BIT(0) +#define DPM_FLAG_SMART_PREPARE BIT(1) + struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; @@ -561,6 +580,7 @@ struct dev_pm_info { bool is_late_suspended:1; bool early_init:1; /* Owned by the PM core */ bool direct_complete:1; /* Owned by the PM core */ + u32 driver_flags; spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; Index: linux-pm/drivers/base/dd.c =================================================================== --- linux-pm.orig/drivers/base/dd.c +++ linux-pm/drivers/base/dd.c @@ -464,6 +464,7 @@ pinctrl_bind_failed: if (dev->pm_domain && dev->pm_domain->dismiss) dev->pm_domain->dismiss(dev); pm_runtime_reinit(dev); + dev_pm_set_driver_flags(dev, 0); switch (ret) { case -EPROBE_DEFER: @@ -869,6 +870,7 @@ static void __device_release_driver(stru if (dev->pm_domain && dev->pm_domain->dismiss) dev->pm_domain->dismiss(dev); pm_runtime_reinit(dev); + dev_pm_set_driver_flags(dev, 0); klist_remove(&dev->p->knode_driver); device_pm_check_callbacks(dev); Index: linux-pm/drivers/base/power/main.c =================================================================== --- linux-pm.orig/drivers/base/power/main.c +++ linux-pm/drivers/base/power/main.c @@ -1700,7 +1700,9 @@ unlock: * applies to suspend transitions, however. */ spin_lock_irq(&dev->power.lock); - dev->power.direct_complete = ret > 0 && state.event == PM_EVENT_SUSPEND; + dev->power.direct_complete = state.event == PM_EVENT_SUSPEND && + pm_runtime_suspended(dev) && ret > 0 && + !dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP); spin_unlock_irq(&dev->power.lock); return 0; } Index: linux-pm/drivers/pci/pci-driver.c =================================================================== --- linux-pm.orig/drivers/pci/pci-driver.c +++ linux-pm/drivers/pci/pci-driver.c @@ -682,8 +682,11 @@ static int pci_pm_prepare(struct device if (drv && drv->pm && drv->pm->prepare) { int error = drv->pm->prepare(dev); - if (error) + if (error < 0) return error; + + if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) + return 0; } return pci_dev_keep_suspended(to_pci_dev(dev)); } Index: linux-pm/drivers/acpi/device_pm.c =================================================================== --- linux-pm.orig/drivers/acpi/device_pm.c +++ linux-pm/drivers/acpi/device_pm.c @@ -965,6 +965,9 @@ int acpi_subsys_prepare(struct device *d if (ret < 0) return ret; + if (!ret && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE)) + return 0; + if (!adev || !pm_runtime_suspended(dev)) return 0; Index: linux-pm/Documentation/driver-api/pm/devices.rst =================================================================== --- linux-pm.orig/Documentation/driver-api/pm/devices.rst +++ linux-pm/Documentation/driver-api/pm/devices.rst @@ -354,6 +354,20 @@ the phases are: ``prepare``, ``suspend`` is because all such devices are initially set to runtime-suspended with runtime PM disabled. + This feature also can be controlled by device drivers by using the + ``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power + management flags. [Typically, they are set at the time the driver is + probed against the device in question by passing them to the + :c:func:`dev_pm_set_driver_flags` helper function.] If the first of + these flags is set, the PM core will not apply the direct-complete + procedure described above to the given device and, consequenty, to any + of its ancestors. The second flag, when set, informs the middle layer + code (bus types, device types, PM domains, classes) that it should take + the return value of the ``->prepare`` callback provided by the driver + into account and it may only return a positive value from its own + ``->prepare`` callback if the driver's one also has returned a positive + value. + 2. The ``->suspend`` methods should quiesce the device to stop it from performing I/O. They also may save the device registers and put it into the appropriate low-power state, depending on the bus type the device is Index: linux-pm/Documentation/power/pci.txt =================================================================== --- linux-pm.orig/Documentation/power/pci.txt +++ linux-pm/Documentation/power/pci.txt @@ -961,6 +961,25 @@ dev_pm_ops to indicate that one suspend .suspend(), .freeze(), and .poweroff() members and one resume routine is to be pointed to by the .resume(), .thaw(), and .restore() members. +3.1.19. Driver Flags for Power Management + +The PM core allows device drivers to set flags that influence the handling of +power management for the devices by the core itself and by middle layer code +including the PCI bus type. The flags should be set once at the driver probe +time with the help of the dev_pm_set_driver_flags() function and they should not +be updated directly afterwards. + +The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete +mechanism allowing device suspend/resume callbacks to be skipped if the device +is in runtime suspend when the system suspend starts. That also affects all of +the ancestors of the device, so this flag should only be used if absolutely +necessary. + +The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a +positive value from pci_pm_prepare() if the ->prepare callback provided by the +driver of the device returns a positive value. That allows the driver to opt +out from using the direct-complete mechanism dynamically. + 3.2. Device Runtime Power Management ------------------------------------ In addition to providing device power management callbacks PCI device drivers