| Message ID | 20171024110914.53612-1-mika.westerberg@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Tue, Oct 24, 2017 at 02:09:14PM +0300, Mika Westerberg wrote: > During surprise hot-unplug the device is not there anymore. When that > happens we read 0xffffffff from the registers and pciehp_unconfigure_device() > might inadvertently think the device is a display device because bridge > control register returns 0xff refusing to remove it: > > pciehp 0000:00:1c.0:pcie004: Slot(0): Link Down > pciehp 0000:00:1c.0:pcie004: Slot(0): Card present > pciehp 0000:00:1c.0:pcie004: Cannot remove display device 0000:01:00.0 > > This causes the hotplug functionality to leave the hierarcy untouched > preventing further hotplug operations. > > Fix this so that we first compare the read bctl value against 0xffff > (device is not present anymore) before determining whether the device is > a display or not. > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > --- > Hi Bjorn, > > This is an updated version of the patch 8/8 in my "PCI: Improvements for > native PCIe hotplug" patch series and applies on top of pci.git/pci/hotplug. > > We now just check bctl against 0xffff before preventing removal of the > "display" device. > > I'm inclined to remove the whole check of "display" device because I don't > see any reason for it to be there in the first place. This code is pretty > much duplicated from shpchp_pci.c where it might make some sense. Yeah, I don't understand this at all. If the device is gone, it's gone, and complaining about it being a display device isn't going to make it come back. I don't know the history of that check, but I agree that it might make sense to remove it altogether. The message (and consequently your changelog) also seem misleading because we're removing *dev*, which in this case is a bridge that might lead to a display device. But it's not a display device itself. > drivers/pci/hotplug/pciehp_pci.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c > index 2a1ca020cf5a..5225b12c5a75 100644 > --- a/drivers/pci/hotplug/pciehp_pci.c > +++ b/drivers/pci/hotplug/pciehp_pci.c > @@ -79,7 +79,6 @@ int pciehp_configure_device(struct slot *p_slot) > int pciehp_unconfigure_device(struct slot *p_slot) > { > int rc = 0; > - u8 bctl = 0; > u8 presence = 0; > struct pci_dev *dev, *temp; > struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; > @@ -102,8 +101,10 @@ int pciehp_unconfigure_device(struct slot *p_slot) > bus_list) { > pci_dev_get(dev); > if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) { > - pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl); > - if (bctl & PCI_BRIDGE_CTL_VGA) { > + u16 bctl = 0; > + > + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); > + if (bctl != 0xffff && (bctl & PCI_BRIDGE_CTL_VGA)) { > ctrl_err(ctrl, > "Cannot remove display device %s\n", > pci_name(dev)); > -- > 2.14.2 >
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 2a1ca020cf5a..5225b12c5a75 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -79,7 +79,6 @@ int pciehp_configure_device(struct slot *p_slot) int pciehp_unconfigure_device(struct slot *p_slot) { int rc = 0; - u8 bctl = 0; u8 presence = 0; struct pci_dev *dev, *temp; struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate; @@ -102,8 +101,10 @@ int pciehp_unconfigure_device(struct slot *p_slot) bus_list) { pci_dev_get(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) { - pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl); - if (bctl & PCI_BRIDGE_CTL_VGA) { + u16 bctl = 0; + + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); + if (bctl != 0xffff && (bctl & PCI_BRIDGE_CTL_VGA)) { ctrl_err(ctrl, "Cannot remove display device %s\n", pci_name(dev));
During surprise hot-unplug the device is not there anymore. When that happens we read 0xffffffff from the registers and pciehp_unconfigure_device() might inadvertently think the device is a display device because bridge control register returns 0xff refusing to remove it: pciehp 0000:00:1c.0:pcie004: Slot(0): Link Down pciehp 0000:00:1c.0:pcie004: Slot(0): Card present pciehp 0000:00:1c.0:pcie004: Cannot remove display device 0000:01:00.0 This causes the hotplug functionality to leave the hierarcy untouched preventing further hotplug operations. Fix this so that we first compare the read bctl value against 0xffff (device is not present anymore) before determining whether the device is a display or not. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- Hi Bjorn, This is an updated version of the patch 8/8 in my "PCI: Improvements for native PCIe hotplug" patch series and applies on top of pci.git/pci/hotplug. We now just check bctl against 0xffff before preventing removal of the "display" device. I'm inclined to remove the whole check of "display" device because I don't see any reason for it to be there in the first place. This code is pretty much duplicated from shpchp_pci.c where it might make some sense. drivers/pci/hotplug/pciehp_pci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)