| Message ID | bbe04556-c62c-6074-d663-884a702614f4@users.sourceforge.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 26 Oct 2017 15:45:43 +0200 SF Markus Elfring <elfring@users.sourceforge.net> wrote: > From: Markus Elfring <elfring@users.sourceforge.net> > Date: Thu, 26 Oct 2017 15:34:46 +0200 > > Add a jump target so that a specific error message is stored only once > at the end of this function implementation. > Replace two calls of the function "dev_err" by goto statements. > > This issue was detected by using the Coccinelle software. > > Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> The advantages of this are very limited. Hence I am not going to apply it. There would be some argument (perhaps) for moving the error message into the function being called but that would then make the driver inconsistent on where it reports errors reducing overall readability. Jonathan > --- > drivers/iio/pressure/hp206c.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c > index c38c19678cf6..978338f2a6e5 100644 > --- a/drivers/iio/pressure/hp206c.c > +++ b/drivers/iio/pressure/hp206c.c > @@ -176,10 +176,8 @@ static int hp206c_conv_and_read(struct iio_dev *indio_dev, > struct i2c_client *client = data->client; > > ret = hp206c_wait_dev_rdy(indio_dev); > - if (ret < 0) { > - dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); > - return ret; > - } > + if (ret < 0) > + goto report_failure; > > ret = i2c_smbus_write_byte(client, conv_cmd); > if (ret < 0) { > @@ -190,16 +188,18 @@ static int hp206c_conv_and_read(struct iio_dev *indio_dev, > usleep_range(sleep_us, sleep_us * 3 / 2); > > ret = hp206c_wait_dev_rdy(indio_dev); > - if (ret < 0) { > - dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); > - return ret; > - } > + if (ret < 0) > + goto report_failure; > > ret = hp206c_read_20bit(client, read_cmd); > if (ret < 0) > dev_err(&indio_dev->dev, "Failed read: %d\n", ret); > > return ret; > + > +report_failure: > + dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); > + return ret; > } > > static int hp206c_read_raw(struct iio_dev *indio_dev, -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> The advantages of this are very limited. Would anybody like to check corresponding effects in more detail? > Hence I am not going to apply it. This is a pity that you like such a kind of source code adjustment not so much so far. Regards, Markus -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 26 Oct 2017 18:38:14 +0200 SF Markus Elfring <elfring@users.sourceforge.net> wrote: > > The advantages of this are very limited. > > Would anybody like to check corresponding effects in more detail? No readabilty is reduced. It is a very rare patch that is accepted where that is the case and the reasons have to be extremely clear and justified. > > > > Hence I am not going to apply it. > > This is a pity that you like such a kind of source code adjustment > not so much so far. > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c index c38c19678cf6..978338f2a6e5 100644 --- a/drivers/iio/pressure/hp206c.c +++ b/drivers/iio/pressure/hp206c.c @@ -176,10 +176,8 @@ static int hp206c_conv_and_read(struct iio_dev *indio_dev, struct i2c_client *client = data->client; ret = hp206c_wait_dev_rdy(indio_dev); - if (ret < 0) { - dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); - return ret; - } + if (ret < 0) + goto report_failure; ret = i2c_smbus_write_byte(client, conv_cmd); if (ret < 0) { @@ -190,16 +188,18 @@ static int hp206c_conv_and_read(struct iio_dev *indio_dev, usleep_range(sleep_us, sleep_us * 3 / 2); ret = hp206c_wait_dev_rdy(indio_dev); - if (ret < 0) { - dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); - return ret; - } + if (ret < 0) + goto report_failure; ret = hp206c_read_20bit(client, read_cmd); if (ret < 0) dev_err(&indio_dev->dev, "Failed read: %d\n", ret); return ret; + +report_failure: + dev_err(&indio_dev->dev, "Device not ready: %d\n", ret); + return ret; } static int hp206c_read_raw(struct iio_dev *indio_dev,