diff mbox

btrfs: test if receive with qgroups corrupts metadata

Message ID 20171030223245.21877-1-jmaggard@netgear.com (mailing list archive)
State New, archived
Headers show

Commit Message

Justin Maggard Oct. 30, 2017, 10:32 p.m. UTC 
This test case does some concurrent send/receives with qgroups enabled.
Currently (4.14-rc7) this usually results in btrfs check errors, and
often also results in a WARN_ON in record_root_in_trans().

Bisecting points to 6426c7ad697d (btrfs: qgroup: Fix qgroup accounting
when creating snapshot) as the culprit.

Signed-off-by: Justin Maggard <jmaggard@netgear.com>
---
 tests/btrfs/152     | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/152.out |  13 +++++++
 tests/btrfs/group   |   1 +
 3 files changed, 116 insertions(+)
 create mode 100755 tests/btrfs/152
 create mode 100644 tests/btrfs/152.out

Comments

Qu Wenruo Oct. 31, 2017, 12:21 a.m. UTC | #1 
On 2017年10月31日 06:32, Justin Maggard wrote:
> This test case does some concurrent send/receives with qgroups enabled.
> Currently (4.14-rc7) this usually results in btrfs check errors, and
> often also results in a WARN_ON in record_root_in_trans().
> 
> Bisecting points to 6426c7ad697d (btrfs: qgroup: Fix qgroup accounting
> when creating snapshot) as the culprit.

Thanks for the report, I'll look into it.

BTW can this only be reproduced by concurrent run?
Will single thread also cause the problem?

Thanks,
Qu
> 
> Signed-off-by: Justin Maggard <jmaggard@netgear.com>
> ---
>  tests/btrfs/152     | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/152.out |  13 +++++++
>  tests/btrfs/group   |   1 +
>  3 files changed, 116 insertions(+)
>  create mode 100755 tests/btrfs/152
>  create mode 100644 tests/btrfs/152.out
> 
> diff --git a/tests/btrfs/152 b/tests/btrfs/152
> new file mode 100755
> index 0000000..ebb88ed
> --- /dev/null
> +++ b/tests/btrfs/152
> @@ -0,0 +1,102 @@
> +#! /bin/bash
> +# FS QA Test No. btrfs/152
> +#
> +# Test that incremental send/receive operations don't corrupt metadata when
> +# qgroups are enabled.
> +#
> +#-----------------------------------------------------------------------
> +#
> +# Copyright (c) 2017 NETGEAR, Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs >>$seqres.full 2>&1
> +_scratch_mount
> +
> +# Enable quotas
> +$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
> +
> +# Create 2 source and 4 destination subvolumes
> +for subvol in subvol1 subvol2 recv1_1 recv1_2 recv2_1 recv2_2; do
> +	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/$subvol | _filter_scratch
> +done
> +mkdir $SCRATCH_MNT/subvol{1,2}/.snapshots
> +touch $SCRATCH_MNT/subvol{1,2}/foo
> +
> +# Create base snapshots and send them
> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
> +	$SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch
> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
> +	$SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch
> +for recv in recv1_1 recv1_2 recv2_1 recv2_2; do
> +	$BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> /dev/null | \
> +		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch
> +done
> +
> +# Now do 10 loops of concurrent incremental send/receives
> +for i in `seq 1 10`; do
> +	prev=$i
> +	curr=$((i+1))
> +
> +	$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
> +		$SCRATCH_MNT/subvol1/.snapshots/${curr} > /dev/null
> +	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
> +		$SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
> +		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_1) > /dev/null &
> +	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
> +		$SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
> +		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_2) > /dev/null &
> +
> +	$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
> +		$SCRATCH_MNT/subvol2/.snapshots/${curr} > /dev/null
> +	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
> +		$SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
> +		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_1) > /dev/null &
> +	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
> +		$SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
> +		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_2) > /dev/null &
> +	wait
> +done
> +
> +_scratch_unmount
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out
> new file mode 100644
> index 0000000..a95bb57
> --- /dev/null
> +++ b/tests/btrfs/152.out
> @@ -0,0 +1,13 @@
> +QA output created by 152
> +Create subvolume 'SCRATCH_MNT/subvol1'
> +Create subvolume 'SCRATCH_MNT/subvol2'
> +Create subvolume 'SCRATCH_MNT/recv1_1'
> +Create subvolume 'SCRATCH_MNT/recv1_2'
> +Create subvolume 'SCRATCH_MNT/recv2_1'
> +Create subvolume 'SCRATCH_MNT/recv2_2'
> +Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1'
> +Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1'
> +At subvol 1
> +At subvol 1
> +At subvol 1
> +At subvol 1
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index e17c275..fb94461 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -154,3 +154,4 @@
>  149 auto quick send compress
>  150 auto quick dangerous
>  151 auto quick
> +152 auto quick metadata qgroup send
>
Justin Maggard Oct. 31, 2017, 12:25 a.m. UTC | #2 
On Mon, Oct 30, 2017 at 5:21 PM, Qu Wenruo <quwenruo.btrfs@gmx.com> wrote:
>
>
> On 2017年10月31日 06:32, Justin Maggard wrote:
>> This test case does some concurrent send/receives with qgroups enabled.
>> Currently (4.14-rc7) this usually results in btrfs check errors, and
>> often also results in a WARN_ON in record_root_in_trans().
>>
>> Bisecting points to 6426c7ad697d (btrfs: qgroup: Fix qgroup accounting
>> when creating snapshot) as the culprit.
>
> Thanks for the report, I'll look into it.
>
> BTW can this only be reproduced by concurrent run?
> Will single thread also cause the problem?
>
> Thanks,
> Qu

I ran 1000 single-threaded passes with no failures, so I'm pretty sure
there must be multiple concurrent receives running to reproduce it.

-Justin

>>
>> Signed-off-by: Justin Maggard <jmaggard@netgear.com>
>> ---
>>  tests/btrfs/152     | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/btrfs/152.out |  13 +++++++
>>  tests/btrfs/group   |   1 +
>>  3 files changed, 116 insertions(+)
>>  create mode 100755 tests/btrfs/152
>>  create mode 100644 tests/btrfs/152.out
>>
>> diff --git a/tests/btrfs/152 b/tests/btrfs/152
>> new file mode 100755
>> index 0000000..ebb88ed
>> --- /dev/null
>> +++ b/tests/btrfs/152
>> @@ -0,0 +1,102 @@
>> +#! /bin/bash
>> +# FS QA Test No. btrfs/152
>> +#
>> +# Test that incremental send/receive operations don't corrupt metadata when
>> +# qgroups are enabled.
>> +#
>> +#-----------------------------------------------------------------------
>> +#
>> +# Copyright (c) 2017 NETGEAR, Inc.  All Rights Reserved.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +tmp=/tmp/$$
>> +status=1     # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> +     cd /
>> +     rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# real QA test starts here
>> +_supported_fs btrfs
>> +_supported_os Linux
>> +_require_scratch
>> +
>> +rm -f $seqres.full
>> +
>> +_scratch_mkfs >>$seqres.full 2>&1
>> +_scratch_mount
>> +
>> +# Enable quotas
>> +$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
>> +
>> +# Create 2 source and 4 destination subvolumes
>> +for subvol in subvol1 subvol2 recv1_1 recv1_2 recv2_1 recv2_2; do
>> +     $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/$subvol | _filter_scratch
>> +done
>> +mkdir $SCRATCH_MNT/subvol{1,2}/.snapshots
>> +touch $SCRATCH_MNT/subvol{1,2}/foo
>> +
>> +# Create base snapshots and send them
>> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
>> +     $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch
>> +$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
>> +     $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch
>> +for recv in recv1_1 recv1_2 recv2_1 recv2_2; do
>> +     $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> /dev/null | \
>> +             $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch
>> +done
>> +
>> +# Now do 10 loops of concurrent incremental send/receives
>> +for i in `seq 1 10`; do
>> +     prev=$i
>> +     curr=$((i+1))
>> +
>> +     $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
>> +             $SCRATCH_MNT/subvol1/.snapshots/${curr} > /dev/null
>> +     ($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
>> +             $SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
>> +             $BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_1) > /dev/null &
>> +     ($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
>> +             $SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
>> +             $BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_2) > /dev/null &
>> +
>> +     $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
>> +             $SCRATCH_MNT/subvol2/.snapshots/${curr} > /dev/null
>> +     ($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
>> +             $SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
>> +             $BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_1) > /dev/null &
>> +     ($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
>> +             $SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
>> +             $BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_2) > /dev/null &
>> +     wait
>> +done
>> +
>> +_scratch_unmount
>> +
>> +status=0
>> +exit
>> diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out
>> new file mode 100644
>> index 0000000..a95bb57
>> --- /dev/null
>> +++ b/tests/btrfs/152.out
>> @@ -0,0 +1,13 @@
>> +QA output created by 152
>> +Create subvolume 'SCRATCH_MNT/subvol1'
>> +Create subvolume 'SCRATCH_MNT/subvol2'
>> +Create subvolume 'SCRATCH_MNT/recv1_1'
>> +Create subvolume 'SCRATCH_MNT/recv1_2'
>> +Create subvolume 'SCRATCH_MNT/recv2_1'
>> +Create subvolume 'SCRATCH_MNT/recv2_2'
>> +Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1'
>> +Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1'
>> +At subvol 1
>> +At subvol 1
>> +At subvol 1
>> +At subvol 1
>> diff --git a/tests/btrfs/group b/tests/btrfs/group
>> index e17c275..fb94461 100644
>> --- a/tests/btrfs/group
>> +++ b/tests/btrfs/group
>> @@ -154,3 +154,4 @@
>>  149 auto quick send compress
>>  150 auto quick dangerous
>>  151 auto quick
>> +152 auto quick metadata qgroup send
>>
>
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/btrfs/152 b/tests/btrfs/152
new file mode 100755
index 0000000..ebb88ed
--- /dev/null
+++ b/tests/btrfs/152
@@ -0,0 +1,102 @@ 
+#! /bin/bash
+# FS QA Test No. btrfs/152
+#
+# Test that incremental send/receive operations don't corrupt metadata when
+# qgroups are enabled.
+#
+#-----------------------------------------------------------------------
+#
+# Copyright (c) 2017 NETGEAR, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+
+rm -f $seqres.full
+
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+# Enable quotas
+$BTRFS_UTIL_PROG quota enable $SCRATCH_MNT
+
+# Create 2 source and 4 destination subvolumes
+for subvol in subvol1 subvol2 recv1_1 recv1_2 recv2_1 recv2_2; do
+	$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/$subvol | _filter_scratch
+done
+mkdir $SCRATCH_MNT/subvol{1,2}/.snapshots
+touch $SCRATCH_MNT/subvol{1,2}/foo
+
+# Create base snapshots and send them
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
+	$SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
+	$SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch
+for recv in recv1_1 recv1_2 recv2_1 recv2_2; do
+	$BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2> /dev/null | \
+		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch
+done
+
+# Now do 10 loops of concurrent incremental send/receives
+for i in `seq 1 10`; do
+	prev=$i
+	curr=$((i+1))
+
+	$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
+		$SCRATCH_MNT/subvol1/.snapshots/${curr} > /dev/null
+	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
+		$SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
+		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_1) > /dev/null &
+	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol1/.snapshots/${prev} \
+		$SCRATCH_MNT/subvol1/.snapshots/${curr} 2> /dev/null | \
+		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv1_2) > /dev/null &
+
+	$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
+		$SCRATCH_MNT/subvol2/.snapshots/${curr} > /dev/null
+	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
+		$SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
+		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_1) > /dev/null &
+	($BTRFS_UTIL_PROG send -p $SCRATCH_MNT/subvol2/.snapshots/${prev} \
+		$SCRATCH_MNT/subvol2/.snapshots/${curr} 2> /dev/null | \
+		$BTRFS_UTIL_PROG receive $SCRATCH_MNT/recv2_2) > /dev/null &
+	wait
+done
+
+_scratch_unmount
+
+status=0
+exit
diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out
new file mode 100644
index 0000000..a95bb57
--- /dev/null
+++ b/tests/btrfs/152.out
@@ -0,0 +1,13 @@ 
+QA output created by 152
+Create subvolume 'SCRATCH_MNT/subvol1'
+Create subvolume 'SCRATCH_MNT/subvol2'
+Create subvolume 'SCRATCH_MNT/recv1_1'
+Create subvolume 'SCRATCH_MNT/recv1_2'
+Create subvolume 'SCRATCH_MNT/recv2_1'
+Create subvolume 'SCRATCH_MNT/recv2_2'
+Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in 'SCRATCH_MNT/subvol1/.snapshots/1'
+Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in 'SCRATCH_MNT/subvol2/.snapshots/1'
+At subvol 1
+At subvol 1
+At subvol 1
+At subvol 1
diff --git a/tests/btrfs/group b/tests/btrfs/group
index e17c275..fb94461 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -154,3 +154,4 @@ 
 149 auto quick send compress
 150 auto quick dangerous
 151 auto quick
+152 auto quick metadata qgroup send