| Message ID | 1507109635-28977-1-git-send-email-yamada.masahiro@socionext.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
SH developers, No comment? Looks like the SH maintainers are no more picking up any patches. If nobody takes care of this patch, I will apply it to Kbuild tree. 2017-10-04 18:33 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > KBUILD_DEFCONFIG := shx3_defconfig > > is never used in a sensible way. KBUILD_DEFCONFIG specifies the > defconfig file used by "make defconfig", but CONFIG_SUPERH32 is > never set when building config targets. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- > > arch/sh/Makefile | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/sh/Makefile b/arch/sh/Makefile > index 280bbff..c937ec0 100644 > --- a/arch/sh/Makefile > +++ b/arch/sh/Makefile > @@ -96,6 +96,7 @@ defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux > # Set some sensible Kbuild defaults > boot := arch/sh/boot > KBUILD_IMAGE := $(boot)/$(defaultimage-y) > +KBUILD_DEFCONFIG := cayman_defconfig > > # > # Choosing incompatible machines durings configuration will result in > @@ -105,14 +106,12 @@ ifdef CONFIG_SUPERH32 > UTS_MACHINE := sh > BITS := 32 > LDFLAGS_vmlinux += -e _stext > -KBUILD_DEFCONFIG := shx3_defconfig > else > UTS_MACHINE := sh64 > BITS := 64 > LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ > --defsym phys_stext_shmedia=phys_stext+1 \ > -e phys_stext_shmedia > -KBUILD_DEFCONFIG := cayman_defconfig > endif > > ifdef CONFIG_CPU_LITTLE_ENDIAN > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Yamada-san, On Wed, Oct 4, 2017 at 11:33 AM, Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > KBUILD_DEFCONFIG := shx3_defconfig > > is never used in a sensible way. KBUILD_DEFCONFIG specifies the > defconfig file used by "make defconfig", but CONFIG_SUPERH32 is > never set when building config targets. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- > > arch/sh/Makefile | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/arch/sh/Makefile b/arch/sh/Makefile > index 280bbff..c937ec0 100644 > --- a/arch/sh/Makefile > +++ b/arch/sh/Makefile > @@ -96,6 +96,7 @@ defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux > # Set some sensible Kbuild defaults > boot := arch/sh/boot > KBUILD_IMAGE := $(boot)/$(defaultimage-y) > +KBUILD_DEFCONFIG := cayman_defconfig cayman_defconfig is a 64-bit defconfig? As the big chunk of SH platforms are 32-bit (are there any 64-bit out in the wild?), does it make sense to make a 64-bit defconfig the default? > # > # Choosing incompatible machines durings configuration will result in > @@ -105,14 +106,12 @@ ifdef CONFIG_SUPERH32 > UTS_MACHINE := sh > BITS := 32 > LDFLAGS_vmlinux += -e _stext > -KBUILD_DEFCONFIG := shx3_defconfig > else > UTS_MACHINE := sh64 > BITS := 64 > LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ > --defsym phys_stext_shmedia=phys_stext+1 \ > -e phys_stext_shmedia > -KBUILD_DEFCONFIG := cayman_defconfig > endif > > ifdef CONFIG_CPU_LITTLE_ENDIAN Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Geert, 2017-11-02 18:18 GMT+09:00 Geert Uytterhoeven <geert@linux-m68k.org>: > Hi Yamada-san, > > On Wed, Oct 4, 2017 at 11:33 AM, Masahiro Yamada > <yamada.masahiro@socionext.com> wrote: >> KBUILD_DEFCONFIG := shx3_defconfig >> >> is never used in a sensible way. KBUILD_DEFCONFIG specifies the >> defconfig file used by "make defconfig", but CONFIG_SUPERH32 is >> never set when building config targets. >> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> >> --- >> >> arch/sh/Makefile | 3 +-- >> 1 file changed, 1 insertion(+), 2 deletions(-) >> >> diff --git a/arch/sh/Makefile b/arch/sh/Makefile >> index 280bbff..c937ec0 100644 >> --- a/arch/sh/Makefile >> +++ b/arch/sh/Makefile >> @@ -96,6 +96,7 @@ defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux >> # Set some sensible Kbuild defaults >> boot := arch/sh/boot >> KBUILD_IMAGE := $(boot)/$(defaultimage-y) >> +KBUILD_DEFCONFIG := cayman_defconfig > > cayman_defconfig is a 64-bit defconfig? > As the big chunk of SH platforms are 32-bit (are there any 64-bit out in > the wild?), does it make sense to make a 64-bit defconfig the default? No. Seems 32-bit. $ make ARCH=sh cayman_defconfig && head -n 10 .config # # configuration written to .config # # # Automatically generated file; DO NOT EDIT. # Linux/sh 4.14.0-rc7 Kernel Configuration # CONFIG_SUPERH=y CONFIG_SUPERH32=y # CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y So, both shx3_defconfig and cayman_defconfig are 32-bit defconfig. I do not know the point of this ifdef select. Anyway, my clean-up is to remove the unused line from the Makefile. >> # >> # Choosing incompatible machines durings configuration will result in >> @@ -105,14 +106,12 @@ ifdef CONFIG_SUPERH32 >> UTS_MACHINE := sh >> BITS := 32 >> LDFLAGS_vmlinux += -e _stext >> -KBUILD_DEFCONFIG := shx3_defconfig >> else >> UTS_MACHINE := sh64 >> BITS := 64 >> LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ >> --defsym phys_stext_shmedia=phys_stext+1 \ >> -e phys_stext_shmedia >> -KBUILD_DEFCONFIG := cayman_defconfig >> endif >> >> ifdef CONFIG_CPU_LITTLE_ENDIAN > > Gr{oetje,eeting}s, >
2017-11-02 18:26 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > Hi Geert, > > 2017-11-02 18:18 GMT+09:00 Geert Uytterhoeven <geert@linux-m68k.org>: >> Hi Yamada-san, >> >> On Wed, Oct 4, 2017 at 11:33 AM, Masahiro Yamada >> <yamada.masahiro@socionext.com> wrote: >>> KBUILD_DEFCONFIG := shx3_defconfig >>> >>> is never used in a sensible way. KBUILD_DEFCONFIG specifies the >>> defconfig file used by "make defconfig", but CONFIG_SUPERH32 is >>> never set when building config targets. >>> >>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> >>> --- >>> >>> arch/sh/Makefile | 3 +-- >>> 1 file changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/arch/sh/Makefile b/arch/sh/Makefile >>> index 280bbff..c937ec0 100644 >>> --- a/arch/sh/Makefile >>> +++ b/arch/sh/Makefile >>> @@ -96,6 +96,7 @@ defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux >>> # Set some sensible Kbuild defaults >>> boot := arch/sh/boot >>> KBUILD_IMAGE := $(boot)/$(defaultimage-y) >>> +KBUILD_DEFCONFIG := cayman_defconfig >> >> cayman_defconfig is a 64-bit defconfig? >> As the big chunk of SH platforms are 32-bit (are there any 64-bit out in >> the wild?), does it make sense to make a 64-bit defconfig the default? > > > No. Seems 32-bit. > > > $ make ARCH=sh cayman_defconfig && head -n 10 .config > # > # configuration written to .config > # > # > # Automatically generated file; DO NOT EDIT. > # Linux/sh 4.14.0-rc7 Kernel Configuration > # > CONFIG_SUPERH=y > CONFIG_SUPERH32=y > # CONFIG_SUPERH64 is not set > CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_GENERIC_BUG=y > > > > So, both shx3_defconfig and cayman_defconfig are 32-bit defconfig. > > I do not know the point of this ifdef select. > > Anyway, my clean-up is to remove the unused line from the Makefile. > > Hmm, I was puzzled by SH configuration. SH decides CPU bit by ARCH environment, not by defconfig. config SUPERH32 def_bool ARCH = "sh" make ARCH=sh defconfig configures for cayman_defconfig, with CONFIG_SUPERH32 make ARCH=sh64 defconfig configures for cayman_defconfig, with CONFIG_SUPERH64 shx3_defconfig is never used.
diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 280bbff..c937ec0 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -96,6 +96,7 @@ defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux # Set some sensible Kbuild defaults boot := arch/sh/boot KBUILD_IMAGE := $(boot)/$(defaultimage-y) +KBUILD_DEFCONFIG := cayman_defconfig # # Choosing incompatible machines durings configuration will result in @@ -105,14 +106,12 @@ ifdef CONFIG_SUPERH32 UTS_MACHINE := sh BITS := 32 LDFLAGS_vmlinux += -e _stext -KBUILD_DEFCONFIG := shx3_defconfig else UTS_MACHINE := sh64 BITS := 64 LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ --defsym phys_stext_shmedia=phys_stext+1 \ -e phys_stext_shmedia -KBUILD_DEFCONFIG := cayman_defconfig endif ifdef CONFIG_CPU_LITTLE_ENDIAN
KBUILD_DEFCONFIG := shx3_defconfig is never used in a sensible way. KBUILD_DEFCONFIG specifies the defconfig file used by "make defconfig", but CONFIG_SUPERH32 is never set when building config targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/sh/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)