| Message ID | 1510654613-47868-5-git-send-email-anton.nefedov@virtuozzo.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2017-11-14 11:16, Anton Nefedov wrote: > Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> > --- > qapi/block-core.json | 4 ++++ > include/block/block_int.h | 4 +++- > block/stream.c | 16 ++++++++++++---- > blockdev.c | 13 ++++++++++++- > hmp.c | 2 ++ > hmp-commands.hx | 4 ++-- > 6 files changed, 35 insertions(+), 8 deletions(-) Looks good to me overall, two notes below. Max > diff --git a/qapi/block-core.json b/qapi/block-core.json > index ab96e34..b0d022f 100644 > --- a/qapi/block-core.json > +++ b/qapi/block-core.json > @@ -2007,6 +2007,9 @@ > # > # @speed: the maximum speed, in bytes per second > # > +# @compress: true to compress data, if the target format supports it. > +# (default: false). Since 2.12. > +# Too many full stops (one before, one after the parentheses). Also, this makes it sound a bit like it would still be possible to specify this parameter even if the target doesn't support it (and it would just be ignored then), but that's not true. Also, the format most parameter documentation follows for block-stream is more "@parameter: Description. Default. (Since version)". So I'd suggest: "true to compress data; may only be set if the target format supports it. Defaults to false if omitted. (Since 2.12)" But I won't argue too much over the format, so the following is OK, too: "true to compress data; may only be set if the target format supports it (default: false). (Since 2.12)" > # @on-error: the action to take on an error (default report). > # 'stop' and 'enospc' can only be used if the block device > # supports io-status (see BlockInfo). Since 1.3. > @@ -2026,6 +2029,7 @@ > { 'command': 'block-stream', > 'data': { '*job-id': 'str', 'device': 'str', '*base': 'str', > '*base-node': 'str', '*backing-file': 'str', '*speed': 'int', > + '*compress': 'bool', > '*on-error': 'BlockdevOnError' } } > > ## > diff --git a/include/block/block_int.h b/include/block/block_int.h > index a548277..093bf9b 100644 > --- a/include/block/block_int.h > +++ b/include/block/block_int.h > @@ -863,6 +863,7 @@ int is_windows_drive(const char *filename); > * @backing_file_str: The file name that will be written to @bs as the > * the new backing file if the job completes. Ignored if @base is %NULL. > * @speed: The maximum speed, in bytes per second, or 0 for unlimited. > + * @compress: True to compress data. > * @on_error: The action to take upon error. > * @errp: Error object. > * > @@ -875,7 +876,8 @@ int is_windows_drive(const char *filename); > */ > void stream_start(const char *job_id, BlockDriverState *bs, > BlockDriverState *base, const char *backing_file_str, > - int64_t speed, BlockdevOnError on_error, Error **errp); > + int64_t speed, bool compress, > + BlockdevOnError on_error, Error **errp); > > /** > * commit_start: > diff --git a/block/stream.c b/block/stream.c > index e6f7234..75c9d66 100644 > --- a/block/stream.c > +++ b/block/stream.c > @@ -38,23 +38,29 @@ typedef struct StreamBlockJob { > BlockdevOnError on_error; > char *backing_file_str; > int bs_flags; > + bool compress; > } StreamBlockJob; > > static int coroutine_fn stream_populate(BlockBackend *blk, > int64_t offset, uint64_t bytes, > - void *buf) > + void *buf, bool compress) > { > struct iovec iov = { > .iov_base = buf, > .iov_len = bytes, > }; > QEMUIOVector qiov; > + int flags = BDRV_REQ_COPY_ON_READ; > + > + if (compress) { > + flags |= BDRV_REQ_WRITE_COMPRESSED; > + } > > assert(bytes < SIZE_MAX); > qemu_iovec_init_external(&qiov, &iov, 1); > > /* Copy-on-read the unallocated clusters */ > - return blk_co_preadv(blk, offset, qiov.size, &qiov, BDRV_REQ_COPY_ON_READ); > + return blk_co_preadv(blk, offset, qiov.size, &qiov, flags); > } > > typedef struct { > @@ -166,7 +172,7 @@ static void coroutine_fn stream_run(void *opaque) > } > trace_stream_one_iteration(s, offset, n, ret); > if (copy) { > - ret = stream_populate(blk, offset, n, buf); > + ret = stream_populate(blk, offset, n, buf, s->compress); > } > if (ret < 0) { > BlockErrorAction action = > @@ -227,7 +233,8 @@ static const BlockJobDriver stream_job_driver = { > > void stream_start(const char *job_id, BlockDriverState *bs, > BlockDriverState *base, const char *backing_file_str, > - int64_t speed, BlockdevOnError on_error, Error **errp) > + int64_t speed, bool compress, > + BlockdevOnError on_error, Error **errp) > { > StreamBlockJob *s; > BlockDriverState *iter; > @@ -267,6 +274,7 @@ void stream_start(const char *job_id, BlockDriverState *bs, > s->base = base; > s->backing_file_str = g_strdup(backing_file_str); > s->bs_flags = orig_bs_flags; > + s->compress = compress; > > s->on_error = on_error; > trace_stream_start(bs, base, s); > diff --git a/blockdev.c b/blockdev.c > index 56a6b24..18a56d9 100644 > --- a/blockdev.c > +++ b/blockdev.c > @@ -2968,6 +2968,7 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, > bool has_base_node, const char *base_node, > bool has_backing_file, const char *backing_file, > bool has_speed, int64_t speed, > + bool has_compress, bool compress, > bool has_on_error, BlockdevOnError on_error, > Error **errp) > { > @@ -2981,6 +2982,10 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, > on_error = BLOCKDEV_ON_ERROR_REPORT; > } > > + if (!has_compress) { > + compress = false; > + } > + > bs = bdrv_lookup_bs(device, device, errp); > if (!bs) { > return; > @@ -3034,11 +3039,17 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, > goto out; > } > > + if (compress && bs->drv->bdrv_co_pwritev_compressed == NULL) { > + error_setg(errp, "Compression is not supported for this drive %s", > + bdrv_get_device_name(bs)); I think just device instead of bdrv_get_device_name(bs) is better (or bdrv_get_device_or_node_name(bs) at least). > + goto out; > + } > + > /* backing_file string overrides base bs filename */ > base_name = has_backing_file ? backing_file : base_name; > > stream_start(has_job_id ? job_id : NULL, bs, base_bs, base_name, > - has_speed ? speed : 0, on_error, &local_err); > + has_speed ? speed : 0, compress, on_error, &local_err); > if (local_err) { > error_propagate(errp, local_err); > goto out; > diff --git a/hmp.c b/hmp.c > index 35a7041..854c88e 100644 > --- a/hmp.c > +++ b/hmp.c > @@ -1812,9 +1812,11 @@ void hmp_block_stream(Monitor *mon, const QDict *qdict) > const char *device = qdict_get_str(qdict, "device"); > const char *base = qdict_get_try_str(qdict, "base"); > int64_t speed = qdict_get_try_int(qdict, "speed", 0); > + bool compress = qdict_get_try_bool(qdict, "compress", false); > > qmp_block_stream(true, device, device, base != NULL, base, false, NULL, > false, NULL, qdict_haskey(qdict, "speed"), speed, > + qdict_haskey(qdict, "compress"), compress, > true, BLOCKDEV_ON_ERROR_REPORT, &error); > > hmp_handle_error(mon, &error); > diff --git a/hmp-commands.hx b/hmp-commands.hx > index 4afd57c..f6794bb 100644 > --- a/hmp-commands.hx > +++ b/hmp-commands.hx > @@ -75,8 +75,8 @@ ETEXI > > { > .name = "block_stream", > - .args_type = "device:B,speed:o?,base:s?", > - .params = "device [speed [base]]", > + .args_type = "device:B,speed:o?,base:s?,compress:o?", > + .params = "device [speed [base]] [compress]", > .help = "copy data from a backing file into a block device", > .cmd = hmp_block_stream, > }, >
On 15/11/2017 10:16 PM, Max Reitz wrote: > On 2017-11-14 11:16, Anton Nefedov wrote: >> Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> >> --- >> qapi/block-core.json | 4 ++++ >> include/block/block_int.h | 4 +++- >> block/stream.c | 16 ++++++++++++---- >> blockdev.c | 13 ++++++++++++- >> hmp.c | 2 ++ >> hmp-commands.hx | 4 ++-- >> 6 files changed, 35 insertions(+), 8 deletions(-) > > Looks good to me overall, two notes below. > > Max > >> diff --git a/qapi/block-core.json b/qapi/block-core.json >> index ab96e34..b0d022f 100644 >> --- a/qapi/block-core.json >> +++ b/qapi/block-core.json >> @@ -2007,6 +2007,9 @@ >> # >> # @speed: the maximum speed, in bytes per second >> # >> +# @compress: true to compress data, if the target format supports it. >> +# (default: false). Since 2.12. >> +# > > Too many full stops (one before, one after the parentheses). Also, this > makes it sound a bit like it would still be possible to specify this > parameter even if the target doesn't support it (and it would just be > ignored then), but that's not true. > > Also, the format most parameter documentation follows for block-stream > is more "@parameter: Description. Default. (Since version)". > > So I'd suggest: > > "true to compress data; may only be set if the target format supports > it. Defaults to false if omitted. (Since 2.12)" > > But I won't argue too much over the format, so the following is OK, too: > > "true to compress data; may only be set if the target format supports it > (default: false). (Since 2.12)" > Thanks, will fix. [..] >> @@ -3034,11 +3039,17 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, >> goto out; >> } >> >> + if (compress && bs->drv->bdrv_co_pwritev_compressed == NULL) { >> + error_setg(errp, "Compression is not supported for this drive %s", >> + bdrv_get_device_name(bs)); > > I think just device instead of bdrv_get_device_name(bs) is better (or > bdrv_get_device_or_node_name(bs) at least). > device should be enough indeed, done. /Anton
diff --git a/qapi/block-core.json b/qapi/block-core.json index ab96e34..b0d022f 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -2007,6 +2007,9 @@ # # @speed: the maximum speed, in bytes per second # +# @compress: true to compress data, if the target format supports it. +# (default: false). Since 2.12. +# # @on-error: the action to take on an error (default report). # 'stop' and 'enospc' can only be used if the block device # supports io-status (see BlockInfo). Since 1.3. @@ -2026,6 +2029,7 @@ { 'command': 'block-stream', 'data': { '*job-id': 'str', 'device': 'str', '*base': 'str', '*base-node': 'str', '*backing-file': 'str', '*speed': 'int', + '*compress': 'bool', '*on-error': 'BlockdevOnError' } } ## diff --git a/include/block/block_int.h b/include/block/block_int.h index a548277..093bf9b 100644 --- a/include/block/block_int.h +++ b/include/block/block_int.h @@ -863,6 +863,7 @@ int is_windows_drive(const char *filename); * @backing_file_str: The file name that will be written to @bs as the * the new backing file if the job completes. Ignored if @base is %NULL. * @speed: The maximum speed, in bytes per second, or 0 for unlimited. + * @compress: True to compress data. * @on_error: The action to take upon error. * @errp: Error object. * @@ -875,7 +876,8 @@ int is_windows_drive(const char *filename); */ void stream_start(const char *job_id, BlockDriverState *bs, BlockDriverState *base, const char *backing_file_str, - int64_t speed, BlockdevOnError on_error, Error **errp); + int64_t speed, bool compress, + BlockdevOnError on_error, Error **errp); /** * commit_start: diff --git a/block/stream.c b/block/stream.c index e6f7234..75c9d66 100644 --- a/block/stream.c +++ b/block/stream.c @@ -38,23 +38,29 @@ typedef struct StreamBlockJob { BlockdevOnError on_error; char *backing_file_str; int bs_flags; + bool compress; } StreamBlockJob; static int coroutine_fn stream_populate(BlockBackend *blk, int64_t offset, uint64_t bytes, - void *buf) + void *buf, bool compress) { struct iovec iov = { .iov_base = buf, .iov_len = bytes, }; QEMUIOVector qiov; + int flags = BDRV_REQ_COPY_ON_READ; + + if (compress) { + flags |= BDRV_REQ_WRITE_COMPRESSED; + } assert(bytes < SIZE_MAX); qemu_iovec_init_external(&qiov, &iov, 1); /* Copy-on-read the unallocated clusters */ - return blk_co_preadv(blk, offset, qiov.size, &qiov, BDRV_REQ_COPY_ON_READ); + return blk_co_preadv(blk, offset, qiov.size, &qiov, flags); } typedef struct { @@ -166,7 +172,7 @@ static void coroutine_fn stream_run(void *opaque) } trace_stream_one_iteration(s, offset, n, ret); if (copy) { - ret = stream_populate(blk, offset, n, buf); + ret = stream_populate(blk, offset, n, buf, s->compress); } if (ret < 0) { BlockErrorAction action = @@ -227,7 +233,8 @@ static const BlockJobDriver stream_job_driver = { void stream_start(const char *job_id, BlockDriverState *bs, BlockDriverState *base, const char *backing_file_str, - int64_t speed, BlockdevOnError on_error, Error **errp) + int64_t speed, bool compress, + BlockdevOnError on_error, Error **errp) { StreamBlockJob *s; BlockDriverState *iter; @@ -267,6 +274,7 @@ void stream_start(const char *job_id, BlockDriverState *bs, s->base = base; s->backing_file_str = g_strdup(backing_file_str); s->bs_flags = orig_bs_flags; + s->compress = compress; s->on_error = on_error; trace_stream_start(bs, base, s); diff --git a/blockdev.c b/blockdev.c index 56a6b24..18a56d9 100644 --- a/blockdev.c +++ b/blockdev.c @@ -2968,6 +2968,7 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, bool has_base_node, const char *base_node, bool has_backing_file, const char *backing_file, bool has_speed, int64_t speed, + bool has_compress, bool compress, bool has_on_error, BlockdevOnError on_error, Error **errp) { @@ -2981,6 +2982,10 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, on_error = BLOCKDEV_ON_ERROR_REPORT; } + if (!has_compress) { + compress = false; + } + bs = bdrv_lookup_bs(device, device, errp); if (!bs) { return; @@ -3034,11 +3039,17 @@ void qmp_block_stream(bool has_job_id, const char *job_id, const char *device, goto out; } + if (compress && bs->drv->bdrv_co_pwritev_compressed == NULL) { + error_setg(errp, "Compression is not supported for this drive %s", + bdrv_get_device_name(bs)); + goto out; + } + /* backing_file string overrides base bs filename */ base_name = has_backing_file ? backing_file : base_name; stream_start(has_job_id ? job_id : NULL, bs, base_bs, base_name, - has_speed ? speed : 0, on_error, &local_err); + has_speed ? speed : 0, compress, on_error, &local_err); if (local_err) { error_propagate(errp, local_err); goto out; diff --git a/hmp.c b/hmp.c index 35a7041..854c88e 100644 --- a/hmp.c +++ b/hmp.c @@ -1812,9 +1812,11 @@ void hmp_block_stream(Monitor *mon, const QDict *qdict) const char *device = qdict_get_str(qdict, "device"); const char *base = qdict_get_try_str(qdict, "base"); int64_t speed = qdict_get_try_int(qdict, "speed", 0); + bool compress = qdict_get_try_bool(qdict, "compress", false); qmp_block_stream(true, device, device, base != NULL, base, false, NULL, false, NULL, qdict_haskey(qdict, "speed"), speed, + qdict_haskey(qdict, "compress"), compress, true, BLOCKDEV_ON_ERROR_REPORT, &error); hmp_handle_error(mon, &error); diff --git a/hmp-commands.hx b/hmp-commands.hx index 4afd57c..f6794bb 100644 --- a/hmp-commands.hx +++ b/hmp-commands.hx @@ -75,8 +75,8 @@ ETEXI { .name = "block_stream", - .args_type = "device:B,speed:o?,base:s?", - .params = "device [speed [base]]", + .args_type = "device:B,speed:o?,base:s?,compress:o?", + .params = "device [speed [base]] [compress]", .help = "copy data from a backing file into a block device", .cmd = hmp_block_stream, },
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> --- qapi/block-core.json | 4 ++++ include/block/block_int.h | 4 +++- block/stream.c | 16 ++++++++++++---- blockdev.c | 13 ++++++++++++- hmp.c | 2 ++ hmp-commands.hx | 4 ++-- 6 files changed, 35 insertions(+), 8 deletions(-)