| Message ID | 20171116080126.17239-1-rfried@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 4119b6160a35693655199f3e9e4a4d7b154a75b0 |
| Delegated to: | Kalle Valo |
| Headers | show |
On Thu 16 Nov 00:01 PST 2017, Ramon Fried wrote: > From: Eyal Ilsar <eilsar@codeaurora.org> > > If the value for the firmware configuration parameters > BTC_STATIC_LEN_LE_BT and BTC_STATIC_LEN_LE_WLAN are not set the duty > cycle between BT and WLAN is such that if BT (including BLE) is active > WLAN gets 0 bandwidth. When tuning these parameters having a too high > value for WLAN means that BLE performance degrades. > The "sweet" point of roughly half of the maximal values was empirically > found to achieve a balance between BLE and Wi-Fi coexistence > performance. > > Signed-off-by: Eyal Ilsar <eilsar@codeaurora.org> > Signed-off-by: Ramon Fried <rfried@codeaurora.org> Looks good, Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > drivers/net/wireless/ath/wcn36xx/smd.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c > index 9c6590d5348a..6f1e741acf3e 100644 > --- a/drivers/net/wireless/ath/wcn36xx/smd.c > +++ b/drivers/net/wireless/ath/wcn36xx/smd.c > @@ -73,6 +73,8 @@ static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = { > WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1), > WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1), > WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0), > + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_BT, 120000), > + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_WLAN, 30000), > WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10), > WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0), > }; > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
Ramon Fried <rfried@codeaurora.org> wrote: > If the value for the firmware configuration parameters > BTC_STATIC_LEN_LE_BT and BTC_STATIC_LEN_LE_WLAN are not set the duty > cycle between BT and WLAN is such that if BT (including BLE) is active > WLAN gets 0 bandwidth. When tuning these parameters having a too high > value for WLAN means that BLE performance degrades. > The "sweet" point of roughly half of the maximal values was empirically > found to achieve a balance between BLE and Wi-Fi coexistence > performance. > > Signed-off-by: Eyal Ilsar <eilsar@codeaurora.org> > Signed-off-by: Ramon Fried <rfried@codeaurora.org> > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Patch applied to ath-next branch of ath.git, thanks. 4119b6160a35 wcn36xx: set default BTLE coexistence config
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c index 9c6590d5348a..6f1e741acf3e 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.c +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -73,6 +73,8 @@ static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = { WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1), WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1), WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0), + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_BT, 120000), + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_WLAN, 30000), WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10), WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0), };