@@ -66,8 +66,8 @@ struct fsl_diu_shared_fb {
bool in_use;
};
-unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -80,11 +80,12 @@ unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
return 0x00000400;
}
-void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
-void mpc512x_set_monitor_port(int monitor_port)
+void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
{
}
@@ -182,14 +183,10 @@ void mpc512x_set_pixel_clock(unsigned int pixclock)
iounmap(ccm);
}
-ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+enum fsl_diu_monitor_port
+mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return sprintf(buf, "0 - 5121 LCD\n");
-}
-
-int mpc512x_set_sysfs_monitor_port(int val)
-{
- return 0;
+ return FSL_DIU_PORT_DVI;
}
static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
@@ -332,8 +329,7 @@ void __init mpc512x_setup_diu(void)
diu_ops.set_gamma_table = mpc512x_set_gamma_table;
diu_ops.set_monitor_port = mpc512x_set_monitor_port;
diu_ops.set_pixel_clock = mpc512x_set_pixel_clock;
- diu_ops.show_monitor_port = mpc512x_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc512x_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc512x_valid_monitor_port;
diu_ops.release_bootmem = mpc512x_release_bootmem;
#endif
}
@@ -93,8 +93,8 @@
* The Area Descriptor is a 32-bit value that determine which bits in each
* pixel are to be used for each color.
*/
-static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
@@ -118,7 +118,8 @@ static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel,
* On some boards, the gamma table for some ports may need to be modified.
* This is not the case on the P1022DS, so we do nothing.
*/
-static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
+static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
}
@@ -126,7 +127,7 @@ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base)
* p1022ds_set_monitor_port: switch the output to a different monitor port
*
*/
-static void p1022ds_set_monitor_port(int monitor_port)
+static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *pixis_node;
void __iomem *pixis;
@@ -145,19 +146,21 @@ static void p1022ds_set_monitor_port(int monitor_port)
}
brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */
- switch (monitor_port) {
- case 0: /* DVI */
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DVI port, disable the DFP and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DVIEN);
break;
- case 1: /* Single link LVDS */
+ case FSL_DIU_PORT_LVDS:
+ printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
/* Enable the DFP port, disable the DVI and the backlight */
clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
PX_BRDCFG1_DFPEN);
break;
default:
- pr_err("p1022ds: unsupported monitor port %i\n", monitor_port);
+ pr_err("p1022ds: unsupported monitor port %i\n", port);
}
iounmap(pixis);
@@ -214,23 +217,18 @@ void p1022ds_set_pixel_clock(unsigned int pixclock)
}
/**
- * p1022ds_show_monitor_port: show the current monitor
- *
- * This function returns a string indicating whether the current monitor is
- * set to DVI or LVDS.
- */
-ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf)
-{
- return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n",
- monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' ');
-}
-
-/**
- * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs
+ * p1022ds_valid_monitor_port: set the monitor port for sysfs
*/
-int p1022ds_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return val < 2 ? val : 0;
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
+ case FSL_DIU_PORT_LVDS:
+ return port;
+ default:
+ return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+ }
}
#endif
@@ -305,8 +303,7 @@ static void __init p1022_ds_setup_arch(void)
diu_ops.set_gamma_table = p1022ds_set_gamma_table;
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
- diu_ops.show_monitor_port = p1022ds_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
#endif
#ifdef CONFIG_SMP
@@ -152,10 +152,10 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
-unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
- int monitor_port)
+u32 mpc8610hpcd_get_pixel_format(enum fsl_diu_monitor_port port,
+ unsigned int bits_per_pixel)
{
- static const unsigned long pixelformat[][3] = {
+ static const u32 pixelformat[][3] = {
{
MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
@@ -170,7 +170,8 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
unsigned int arch_monitor;
/* The DVI port is mis-wired on revision 1 of this board. */
- arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1;
+ arch_monitor =
+ ((*pixis_arch == 0x01) && (port == FSL_DIU_PORT_DVI)) ? 0 : 1;
switch (bits_per_pixel) {
case 32:
@@ -185,10 +186,11 @@ unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel,
}
}
-void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
+void mpc8610hpcd_set_gamma_table(enum fsl_diu_monitor_port port,
+ char *gamma_table_base)
{
int i;
- if (monitor_port == 2) { /* dual link LVDS */
+ if (port == FSL_DIU_PORT_DLVDS) {
for (i = 0; i < 256*3; i++)
gamma_table_base[i] = (gamma_table_base[i] << 2) |
((gamma_table_base[i] >> 6) & 0x03);
@@ -199,17 +201,21 @@ void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base)
#define PX_BRDCFG0_DLINK (1 << 4)
#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
-void mpc8610hpcd_set_monitor_port(int monitor_port)
+void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
{
- static const u8 bdcfg[] = {
- PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
- PX_BRDCFG0_DLINK,
- 0,
- };
-
- if (monitor_port < 3)
+ switch (port) {
+ case FSL_DIU_PORT_DVI:
clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
- bdcfg[monitor_port]);
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_LVDS:
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ PX_BRDCFG0_DLINK);
+ break;
+ case FSL_DIU_PORT_DLVDS:
+ clrbits8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK);
+ break;
+ }
}
/**
@@ -262,20 +268,10 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
iounmap(guts);
}
-ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf)
-{
- return snprintf(buf, PAGE_SIZE,
- "%c0 - DVI\n"
- "%c1 - Single link LVDS\n"
- "%c2 - Dual link LVDS\n",
- monitor_port == 0 ? '*' : ' ',
- monitor_port == 1 ? '*' : ' ',
- monitor_port == 2 ? '*' : ' ');
-}
-
-int mpc8610hpcd_set_sysfs_monitor_port(int val)
+enum fsl_diu_monitor_port
+mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
{
- return val < 3 ? val : 0;
+ return port;
}
#endif
@@ -307,8 +303,7 @@ static void __init mpc86xx_hpcd_setup_arch(void)
diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port;
diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock;
- diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port;
- diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
+ diu_ops.valid_monitor_port = mpc8610hpcd_valid_monitor_port;
#endif
pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
@@ -22,15 +22,24 @@ struct device_node;
extern void fsl_rstcr_restart(char *cmd);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/* The different ports that the DIU can be connected to */
+enum fsl_diu_monitor_port {
+ FSL_DIU_PORT_DVI, /* DVI */
+ FSL_DIU_PORT_LVDS, /* Single-link LVDS */
+ FSL_DIU_PORT_DLVDS /* Dual-link LVDS */
+};
+
struct platform_diu_data_ops {
- unsigned int (*get_pixel_format) (unsigned int bits_per_pixel,
- int monitor_port);
- void (*set_gamma_table) (int monitor_port, char *gamma_table_base);
- void (*set_monitor_port) (int monitor_port);
- void (*set_pixel_clock) (unsigned int pixclock);
- ssize_t (*show_monitor_port) (int monitor_port, char *buf);
- int (*set_sysfs_monitor_port) (int val);
- void (*release_bootmem) (void);
+ u32 (*get_pixel_format)(enum fsl_diu_monitor_port port,
+ unsigned int bpp);
+ void (*set_gamma_table)(enum fsl_diu_monitor_port port,
+ char *gamma_table_base);
+ void (*set_monitor_port)(enum fsl_diu_monitor_port port);
+ void (*set_pixel_clock)(unsigned int pixclock);
+ enum fsl_diu_monitor_port (*valid_monitor_port)
+ (enum fsl_diu_monitor_port port);
+ void (*release_bootmem)(void);
};
extern struct platform_diu_data_ops diu_ops;
@@ -31,8 +31,6 @@
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
-#include <linux/of_platform.h>
-
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
@@ -183,7 +181,8 @@ static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
static char *fb_mode = "1024x768-32@60";
static unsigned long default_bpp = 32;
-static int monitor_port;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
@@ -201,7 +200,7 @@ struct fsl_diu_data {
void *dummy_aoi_virt;
unsigned int irq;
int fb_enabled;
- int monitor_port;
+ enum fsl_diu_monitor_port monitor_port;
};
struct mfb_info {
@@ -282,6 +281,37 @@ static struct diu_hw dr = {
static struct diu_pool pool;
/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+ enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+ unsigned long val;
+
+ if (s) {
+ if (!strict_strtoul(s, 10, &val) && (val <= 2))
+ port = (enum fsl_diu_monitor_port) val;
+ else if (strncmp(s, "lvds", 4) == 0)
+ port = FSL_DIU_PORT_LVDS;
+ else if (strncmp(s, "dlvds", 5) == 0)
+ port = FSL_DIU_PORT_DLVDS;
+ }
+
+ return diu_ops.valid_monitor_port(port);
+}
+
+/**
* fsl_diu_alloc - allocate memory for the DIU
* @size: number of bytes to allocate
* @param: returned physical address of memory
@@ -847,9 +877,8 @@ static int fsl_diu_set_par(struct fb_info *info)
}
}
- ad->pix_fmt =
- diu_ops.get_pixel_format(var->bits_per_pixel,
- machine_data->monitor_port);
+ ad->pix_fmt = diu_ops.get_pixel_format(machine_data->monitor_port,
+ var->bits_per_pixel);
ad->addr = cpu_to_le32(info->fix.smem_start);
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
var->xres_virtual) | mfbi->g_alpha;
@@ -1455,16 +1484,12 @@ static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
static ssize_t store_monitor(struct device *device,
struct device_attribute *attr, const char *buf, size_t count)
{
- int old_monitor_port;
- unsigned long val;
+ enum fsl_diu_monitor_port old_monitor_port;
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- if (strict_strtoul(buf, 10, &val))
- return 0;
-
old_monitor_port = machine_data->monitor_port;
- machine_data->monitor_port = diu_ops.set_sysfs_monitor_port(val);
+ machine_data->monitor_port = fsl_diu_name_to_port(buf);
if (old_monitor_port != machine_data->monitor_port) {
/* All AOIs need adjust pixel format
@@ -1484,7 +1509,17 @@ static ssize_t show_monitor(struct device *device,
{
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
- return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
+
+ switch (machine_data->monitor_port) {
+ case FSL_DIU_PORT_DVI:
+ return sprintf(buf, "DVI\n");
+ case FSL_DIU_PORT_LVDS:
+ return sprintf(buf, "Single-link LVDS\n");
+ case FSL_DIU_PORT_DLVDS:
+ return sprintf(buf, "Dual-link LVDS\n");
+ }
+
+ return 0;
}
static int __devinit fsl_diu_probe(struct platform_device *ofdev)
@@ -1708,8 +1743,7 @@ static int __init fsl_diu_setup(char *options)
if (!*opt)
continue;
if (!strncmp(opt, "monitor=", 8)) {
- if (!strict_strtoul(opt + 8, 10, &val) && (val <= 2))
- monitor_port = val;
+ monitor_port = fsl_diu_name_to_port(opt + 8);
} else if (!strncmp(opt, "bpp=", 4)) {
if (!strict_strtoul(opt + 4, 10, &val))
default_bpp = val;
@@ -1762,6 +1796,8 @@ static int __init fsl_diu_init(void)
if (fb_get_options("fslfb", &option))
return -ENODEV;
fsl_diu_setup(option);
+#else
+ monitor_port = fsl_diu_name_to_port(monitor_string);
#endif
printk(KERN_INFO "Freescale DIU driver\n");
@@ -1828,7 +1864,7 @@ MODULE_PARM_DESC(mode,
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified mode");
-module_param_named(monitor, monitor_port, int, 0);
-MODULE_PARM_DESC(monitor,
- "Specify the monitor port (0, 1 or 2) if supported by the platform");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+ "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");