| Message ID | 20171129220805.11358-1-cmo@melexis.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 29, 2017 at 11:08:05PM +0100, Crt Mori wrote: > Add device tree bindings for MLX90632 IR temperature sensor. > > Signed-off-by: Crt Mori <cmo@melexis.com> > --- > .../bindings/iio/temperature/mlx90632.txt | 28 ++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/temperature/mlx90632.txt > > diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt > new file mode 100644 > index 000000000000..6073a5ccf9a4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt > @@ -0,0 +1,28 @@ > +* Melexis MLX90632 contactless Infra Red temperature sensor > + > +Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 > + > +There are various applications for the Infra Red contactless temperature sensor > +and MLX90632 is most suitable for consumer applications where measured object > +temperature is in range between -20 to 200 degrees Celsius with relative error > +of measurement below 1 degree Celsius in object temperature range for > +industrial applications. Since it can operate and measure ambient temperature > +in range of -20 to 85 degrees Celsius it is suitable also for outdoor use. > + > +Be aware that electronics surrounding the sensor can increase ambient > +temperature. MLX90632 can be calibrated to reduce the housing effect via > +already existing EEPROM parameters. > + > +Since measured object emissivity effects Infra Red energy emitted, emissivity > +should be set before requesting the object temperature. > + > +Required properties: > + - compatible: should be "melexis,mlx90632" > + - reg: the I2C address of the sensor (default 0x3a) > + > +Example: > + > +mlx90632@02 { Should be ...@3a With that, Reviewed-by: Rob Herring <robh@kernel.org> > + compatible = "melexis,mlx90632"; > + reg = <0x3a>; > +}; > -- > 2.15.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt new file mode 100644 index 000000000000..6073a5ccf9a4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt @@ -0,0 +1,28 @@ +* Melexis MLX90632 contactless Infra Red temperature sensor + +Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 + +There are various applications for the Infra Red contactless temperature sensor +and MLX90632 is most suitable for consumer applications where measured object +temperature is in range between -20 to 200 degrees Celsius with relative error +of measurement below 1 degree Celsius in object temperature range for +industrial applications. Since it can operate and measure ambient temperature +in range of -20 to 85 degrees Celsius it is suitable also for outdoor use. + +Be aware that electronics surrounding the sensor can increase ambient +temperature. MLX90632 can be calibrated to reduce the housing effect via +already existing EEPROM parameters. + +Since measured object emissivity effects Infra Red energy emitted, emissivity +should be set before requesting the object temperature. + +Required properties: + - compatible: should be "melexis,mlx90632" + - reg: the I2C address of the sensor (default 0x3a) + +Example: + +mlx90632@02 { + compatible = "melexis,mlx90632"; + reg = <0x3a>; +};
Add device tree bindings for MLX90632 IR temperature sensor. Signed-off-by: Crt Mori <cmo@melexis.com> --- .../bindings/iio/temperature/mlx90632.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/temperature/mlx90632.txt