| Message ID | 302c93023d8c4a54cafe321d912df484e39727b7.1512396054.git-series.quentin.schulz@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: > This makes the axp20x_adc driver probe with platform device id > "axp813-adc". > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > --- > drivers/mfd/axp20x.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > index 2468b43..42e54d1 100644 > --- a/drivers/mfd/axp20x.c > +++ b/drivers/mfd/axp20x.c > @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { > .resources = axp803_pek_resources, > }, { > .name = "axp20x-regulator", > - } > + }, { > + .name = "axp813-adc", > + }, Any particular reason you're not adding it to the DT? Thanks! Maxime
Hi Maxime, On 05/12/2017 09:08, Maxime Ripard wrote: > On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: >> This makes the axp20x_adc driver probe with platform device id >> "axp813-adc". >> >> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >> --- >> drivers/mfd/axp20x.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >> index 2468b43..42e54d1 100644 >> --- a/drivers/mfd/axp20x.c >> +++ b/drivers/mfd/axp20x.c >> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { >> .resources = axp803_pek_resources, >> }, { >> .name = "axp20x-regulator", >> - } >> + }, { >> + .name = "axp813-adc", >> + }, > > Any particular reason you're not adding it to the DT? > No, no particular reason. It's just the way it is currently for AXP209 and AXP22x so did the same for AXP813. I'll add DT "support" in next version for all AXPs supported by this driver. Or is it worthy of a small separate patch series? Thanks, Quentin
On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > Hi Maxime, > > On 05/12/2017 09:08, Maxime Ripard wrote: >> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: >>> This makes the axp20x_adc driver probe with platform device id >>> "axp813-adc". >>> >>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >>> --- >>> drivers/mfd/axp20x.c | 4 +++- >>> 1 file changed, 3 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >>> index 2468b43..42e54d1 100644 >>> --- a/drivers/mfd/axp20x.c >>> +++ b/drivers/mfd/axp20x.c >>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { >>> .resources = axp803_pek_resources, >>> }, { >>> .name = "axp20x-regulator", >>> - } >>> + }, { >>> + .name = "axp813-adc", >>> + }, >> >> Any particular reason you're not adding it to the DT? >> > > No, no particular reason. It's just the way it is currently for AXP209 > and AXP22x so did the same for AXP813. > > I'll add DT "support" in next version for all AXPs supported by this > driver. Or is it worthy of a small separate patch series? IIRC there's no DT support because there's no need to reference it in the device tree. ChenYu
Hi Chen-Yu, On 07/12/2017 09:54, Chen-Yu Tsai wrote: > On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz > <quentin.schulz@free-electrons.com> wrote: >> Hi Maxime, >> >> On 05/12/2017 09:08, Maxime Ripard wrote: >>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: >>>> This makes the axp20x_adc driver probe with platform device id >>>> "axp813-adc". >>>> >>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >>>> --- >>>> drivers/mfd/axp20x.c | 4 +++- >>>> 1 file changed, 3 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >>>> index 2468b43..42e54d1 100644 >>>> --- a/drivers/mfd/axp20x.c >>>> +++ b/drivers/mfd/axp20x.c >>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { >>>> .resources = axp803_pek_resources, >>>> }, { >>>> .name = "axp20x-regulator", >>>> - } >>>> + }, { >>>> + .name = "axp813-adc", >>>> + }, >>> >>> Any particular reason you're not adding it to the DT? >>> >> >> No, no particular reason. It's just the way it is currently for AXP209 >> and AXP22x so did the same for AXP813. >> >> I'll add DT "support" in next version for all AXPs supported by this >> driver. Or is it worthy of a small separate patch series? > > IIRC there's no DT support because there's no need to reference > it in the device tree. > No current need but that does not mean there won't be a need later for drivers to map IIO channels from the ADC driver (i.e. some components wired to GPIOs of the PMIC for example). Quentin
On Thu, Dec 7, 2017 at 5:03 PM, Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > Hi Chen-Yu, > > On 07/12/2017 09:54, Chen-Yu Tsai wrote: >> On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz >> <quentin.schulz@free-electrons.com> wrote: >>> Hi Maxime, >>> >>> On 05/12/2017 09:08, Maxime Ripard wrote: >>>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: >>>>> This makes the axp20x_adc driver probe with platform device id >>>>> "axp813-adc". >>>>> >>>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> >>>>> --- >>>>> drivers/mfd/axp20x.c | 4 +++- >>>>> 1 file changed, 3 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c >>>>> index 2468b43..42e54d1 100644 >>>>> --- a/drivers/mfd/axp20x.c >>>>> +++ b/drivers/mfd/axp20x.c >>>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { >>>>> .resources = axp803_pek_resources, >>>>> }, { >>>>> .name = "axp20x-regulator", >>>>> - } >>>>> + }, { >>>>> + .name = "axp813-adc", >>>>> + }, >>>> >>>> Any particular reason you're not adding it to the DT? >>>> >>> >>> No, no particular reason. It's just the way it is currently for AXP209 >>> and AXP22x so did the same for AXP813. >>> >>> I'll add DT "support" in next version for all AXPs supported by this >>> driver. Or is it worthy of a small separate patch series? >> >> IIRC there's no DT support because there's no need to reference >> it in the device tree. >> > > No current need but that does not mean there won't be a need later for > drivers to map IIO channels from the ADC driver (i.e. some components > wired to GPIOs of the PMIC for example). Hmm... Why would you map the IIO channels from the ADC? I thought those were all accessible from userspace? However, proper muxing of the GPIO pin to the ADC function makes sense. ChenYu
On Thu, 7 Dec 2017 17:14:30 +0800 Chen-Yu Tsai <wens@csie.org> wrote: > On Thu, Dec 7, 2017 at 5:03 PM, Quentin Schulz > <quentin.schulz@free-electrons.com> wrote: > > Hi Chen-Yu, > > > > On 07/12/2017 09:54, Chen-Yu Tsai wrote: > >> On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz > >> <quentin.schulz@free-electrons.com> wrote: > >>> Hi Maxime, > >>> > >>> On 05/12/2017 09:08, Maxime Ripard wrote: > >>>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote: > >>>>> This makes the axp20x_adc driver probe with platform device id > >>>>> "axp813-adc". > >>>>> > >>>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > >>>>> --- > >>>>> drivers/mfd/axp20x.c | 4 +++- > >>>>> 1 file changed, 3 insertions(+), 1 deletion(-) > >>>>> > >>>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c > >>>>> index 2468b43..42e54d1 100644 > >>>>> --- a/drivers/mfd/axp20x.c > >>>>> +++ b/drivers/mfd/axp20x.c > >>>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { > >>>>> .resources = axp803_pek_resources, > >>>>> }, { > >>>>> .name = "axp20x-regulator", > >>>>> - } > >>>>> + }, { > >>>>> + .name = "axp813-adc", > >>>>> + }, > >>>> > >>>> Any particular reason you're not adding it to the DT? > >>>> > >>> > >>> No, no particular reason. It's just the way it is currently for AXP209 > >>> and AXP22x so did the same for AXP813. > >>> > >>> I'll add DT "support" in next version for all AXPs supported by this > >>> driver. Or is it worthy of a small separate patch series? > >> > >> IIRC there's no DT support because there's no need to reference > >> it in the device tree. > >> > > > > No current need but that does not mean there won't be a need later for > > drivers to map IIO channels from the ADC driver (i.e. some components > > wired to GPIOs of the PMIC for example). > > Hmm... Why would you map the IIO channels from the ADC? I thought those > were all accessible from userspace? There is a reasonably fully featured consumer interface for IIO channels as well. Here it's being used internal to the hardware, but yes if you want to do the mappings to other devices, it will need to 'exist' in the device tree. I'm guessing that you have something in mind that needs this. If not I'd leave it until there is a real user. > > However, proper muxing of the GPIO pin to the ADC function makes sense. > Agreed. Jonathan > ChenYu > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 2468b43..42e54d1 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = { .resources = axp803_pek_resources, }, { .name = "axp20x-regulator", - } + }, { + .name = "axp813-adc", + }, }; static struct axp20x_dev *axp20x_pm_power_off;
This makes the axp20x_adc driver probe with platform device id "axp813-adc". Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> --- drivers/mfd/axp20x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)