diff mbox

[v6,3/6] clk: meson-axg: add clock controller drivers

Message ID 20171211064853.32111-4-yixun.lan@amlogic.com (mailing list archive)
State Superseded
Headers show

Commit Message

Yixun Lan Dec. 11, 2017, 6:48 a.m. UTC
From: Qiufang Dai <qiufang.dai@amlogic.com>

Add clock controller drivers for Amlogic Meson-AXG SoC.

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/Kconfig.platforms |   1 +
 drivers/clk/meson/Kconfig    |   8 +
 drivers/clk/meson/Makefile   |   1 +
 drivers/clk/meson/axg.c      | 944 +++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/axg.h      | 126 ++++++
 5 files changed, 1080 insertions(+)
 create mode 100644 drivers/clk/meson/axg.c
 create mode 100644 drivers/clk/meson/axg.h

Comments

Jerome Brunet Dec. 11, 2017, 9:46 a.m. UTC | #1
On Mon, 2017-12-11 at 14:48 +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
> 
> Add clock controller drivers for Amlogic Meson-AXG SoC.
> 
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
>  arch/arm64/Kconfig.platforms |   1 +
>  drivers/clk/meson/Kconfig    |   8 +
>  drivers/clk/meson/Makefile   |   1 +
>  drivers/clk/meson/axg.c      | 944
> +++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/axg.h      | 126 ++++++
>  5 files changed, 1080 insertions(+)
>  create mode 100644 drivers/clk/meson/axg.c
>  create mode 100644 drivers/clk/meson/axg.h

Overall, the changes looks good to me.
I still have a few comments which I'd like to see addressed quickly after this
series is merged

[...]

> 
> +static struct meson_clk_pll axg_fixed_pll = {
> +	.m = {
> +		.reg_off = HHI_MPLL_CNTL,
> +		.shift   = 0,
> +		.width   = 9,
> +	},
> +	.n = {
> +		.reg_off = HHI_MPLL_CNTL,
> +		.shift   = 9,
> +		.width   = 5,
> +	},
> +	.od = {
> +		.reg_off = HHI_MPLL_CNTL,
> +		.shift   = 16,
> +		.width   = 2,
> +	},
> +	.lock = &clk_lock,
> +	.hw.init = &(struct clk_init_data){
> +		.name = "fixed_pll",
> +		.ops = &meson_clk_pll_ro_ops,
> +		.parent_names = (const char *[]){ "xtal" },
> +		.num_parents = 1,
> +		.flags = CLK_GET_RATE_NOCACHE,

Is the rate of this clock supposed to changed by something else than
the CCF after boot ?

If not, you should drop this flag.
Same comment goes for axg_sys_pll and axg_gp0_pll

> +	},
> +};

[...]

> +/*
> + * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
> + * and should be modeled with their respective PLLs via the forthcoming
> + * coordinated clock rates feature
> + */
> +static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
> +static const char * const clk81_parent_names[] = {
> +	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
> +	"fclk_div3", "fclk_div5"
> +};
> +
> +static struct clk_mux axg_mpeg_clk_sel = {
> +	.reg = (void *)HHI_MPEG_CLK_CNTL,
> +	.mask = 0x7,
> +	.shift = 12,
> +	.flags = CLK_MUX_READ_ONLY,
> +	.table = mux_table_clk81,
> +	.lock = &clk_lock,
> +	.hw.init = &(struct clk_init_data){
> +		.name = "mpeg_clk_sel",
> +		.ops = &clk_mux_ro_ops,
> +		/*
> +		 * bits 14:12 selects from 8 possible parents:
> +		 * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
> +		 * fclk_div4, fclk_div3, fclk_div5
> +		 */

This comment is not necessary with table above.

> +		.parent_names = clk81_parent_names,
> +		.num_parents = ARRAY_SIZE(clk81_parent_names),
> +		.flags = CLK_SET_RATE_NO_REPARENT,

With ro_ops, this flag is not necessary, consider removing it.

> +	},
> +};
> +
>
Yixun Lan Dec. 11, 2017, 10:16 a.m. UTC | #2
HI Jerome:

On 12/11/17 17:46, Jerome Brunet wrote:
> On Mon, 2017-12-11 at 14:48 +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add clock controller drivers for Amlogic Meson-AXG SoC.
>>
>> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>>  arch/arm64/Kconfig.platforms |   1 +
>>  drivers/clk/meson/Kconfig    |   8 +
>>  drivers/clk/meson/Makefile   |   1 +
>>  drivers/clk/meson/axg.c      | 944
>> +++++++++++++++++++++++++++++++++++++++++++
>>  drivers/clk/meson/axg.h      | 126 ++++++
>>  5 files changed, 1080 insertions(+)
>>  create mode 100644 drivers/clk/meson/axg.c
>>  create mode 100644 drivers/clk/meson/axg.h
> 
> Overall, the changes looks good to me.
> I still have a few comments which I'd like to see addressed quickly after this
> series is merged
did you say that:
 you will merge these patches now, then I could send fixes later?

or I can send another version (v7) to address this..

> 
> [...]
> 
>>
>> +static struct meson_clk_pll axg_fixed_pll = {
>> +	.m = {
>> +		.reg_off = HHI_MPLL_CNTL,
>> +		.shift   = 0,
>> +		.width   = 9,
>> +	},
>> +	.n = {
>> +		.reg_off = HHI_MPLL_CNTL,
>> +		.shift   = 9,
>> +		.width   = 5,
>> +	},
>> +	.od = {
>> +		.reg_off = HHI_MPLL_CNTL,
>> +		.shift   = 16,
>> +		.width   = 2,
>> +	},
>> +	.lock = &clk_lock,
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "fixed_pll",
>> +		.ops = &meson_clk_pll_ro_ops,
>> +		.parent_names = (const char *[]){ "xtal" },
>> +		.num_parents = 1,
>> +		.flags = CLK_GET_RATE_NOCACHE,
> 
> Is the rate of this clock supposed to changed by something else than
> the CCF after boot ?
> 
> If not, you should drop this flag.
> Same comment goes for axg_sys_pll and axg_gp0_pll
> 
we need to keep the CLK_GET_RATE_NOCACHE flag for axg_sys_pll, since the
BL30 will change it for the frequency change.
for the other two, we can drop them safely


>> +	},
>> +};
> 
> [...]
> 
>> +/*
>> + * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
>> + * and should be modeled with their respective PLLs via the forthcoming
>> + * coordinated clock rates feature
>> + */
>> +static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
>> +static const char * const clk81_parent_names[] = {
>> +	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
>> +	"fclk_div3", "fclk_div5"
>> +};
>> +
>> +static struct clk_mux axg_mpeg_clk_sel = {
>> +	.reg = (void *)HHI_MPEG_CLK_CNTL,
>> +	.mask = 0x7,
>> +	.shift = 12,
>> +	.flags = CLK_MUX_READ_ONLY,
>> +	.table = mux_table_clk81,
>> +	.lock = &clk_lock,
>> +	.hw.init = &(struct clk_init_data){
>> +		.name = "mpeg_clk_sel",
>> +		.ops = &clk_mux_ro_ops,
>> +		/*
>> +		 * bits 14:12 selects from 8 possible parents:
>> +		 * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
>> +		 * fclk_div4, fclk_div3, fclk_div5
>> +		 */
> 
> This comment is not necessary with table above.
> 
can drop

>> +		.parent_names = clk81_parent_names,
>> +		.num_parents = ARRAY_SIZE(clk81_parent_names),
>> +		.flags = CLK_SET_RATE_NO_REPARENT,
> 
> With ro_ops, this flag is not necessary, consider removing it.
> 
can drop
>> +	},
>> +};
>> +
>>
> 
> .
>
Jerome Brunet Dec. 11, 2017, 10:21 a.m. UTC | #3
On Mon, 2017-12-11 at 18:16 +0800, Yixun Lan wrote:
> > Overall, the changes looks good to me.
> > I still have a few comments which I'd like to see addressed quickly after this
> > series is merged
> 
> did you say that:
>  you will merge these patches now, then I could send fixes later?
> 
> or I can send another version (v7) to address this..

I'm OK taking this as it is but I'd like to see the comments addressed quickly.
Of course, If you prefer to make a v7, no one is stopping you.

Jerome
diff mbox

Patch

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@  config ARCH_MESON
 	select PINCTRL_MESON
 	select COMMON_CLK_AMLOGIC
 	select COMMON_CLK_GXBB
+	select COMMON_CLK_AXG
 	select MESON_IRQ_GPIO
 	help
 	  This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@  config COMMON_CLK_GXBB
 	help
 	  Support for the clock controller on AmLogic S905 devices, aka gxbb.
 	  Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	help
+	  Support for the clock controller on AmLogic A113D devices, aka axg.
+	  Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@ 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+	PLL_RATE(24000000, 56, 1, 2),
+	PLL_RATE(48000000, 64, 1, 2),
+	PLL_RATE(72000000, 72, 1, 2),
+	PLL_RATE(96000000, 64, 1, 2),
+	PLL_RATE(120000000, 80, 1, 2),
+	PLL_RATE(144000000, 96, 1, 2),
+	PLL_RATE(168000000, 56, 1, 1),
+	PLL_RATE(192000000, 64, 1, 1),
+	PLL_RATE(216000000, 72, 1, 1),
+	PLL_RATE(240000000, 80, 1, 1),
+	PLL_RATE(264000000, 88, 1, 1),
+	PLL_RATE(288000000, 96, 1, 1),
+	PLL_RATE(312000000, 52, 1, 2),
+	PLL_RATE(336000000, 56, 1, 2),
+	PLL_RATE(360000000, 60, 1, 2),
+	PLL_RATE(384000000, 64, 1, 2),
+	PLL_RATE(408000000, 68, 1, 2),
+	PLL_RATE(432000000, 72, 1, 2),
+	PLL_RATE(456000000, 76, 1, 2),
+	PLL_RATE(480000000, 80, 1, 2),
+	PLL_RATE(504000000, 84, 1, 2),
+	PLL_RATE(528000000, 88, 1, 2),
+	PLL_RATE(552000000, 92, 1, 2),
+	PLL_RATE(576000000, 96, 1, 2),
+	PLL_RATE(600000000, 50, 1, 1),
+	PLL_RATE(624000000, 52, 1, 1),
+	PLL_RATE(648000000, 54, 1, 1),
+	PLL_RATE(672000000, 56, 1, 1),
+	PLL_RATE(696000000, 58, 1, 1),
+	PLL_RATE(720000000, 60, 1, 1),
+	PLL_RATE(744000000, 62, 1, 1),
+	PLL_RATE(768000000, 64, 1, 1),
+	PLL_RATE(792000000, 66, 1, 1),
+	PLL_RATE(816000000, 68, 1, 1),
+	PLL_RATE(840000000, 70, 1, 1),
+	PLL_RATE(864000000, 72, 1, 1),
+	PLL_RATE(888000000, 74, 1, 1),
+	PLL_RATE(912000000, 76, 1, 1),
+	PLL_RATE(936000000, 78, 1, 1),
+	PLL_RATE(960000000, 80, 1, 1),
+	PLL_RATE(984000000, 82, 1, 1),
+	PLL_RATE(1008000000, 84, 1, 1),
+	PLL_RATE(1032000000, 86, 1, 1),
+	PLL_RATE(1056000000, 88, 1, 1),
+	PLL_RATE(1080000000, 90, 1, 1),
+	PLL_RATE(1104000000, 92, 1, 1),
+	PLL_RATE(1128000000, 94, 1, 1),
+	PLL_RATE(1152000000, 96, 1, 1),
+	PLL_RATE(1176000000, 98, 1, 1),
+	PLL_RATE(1200000000, 50, 1, 0),
+	PLL_RATE(1224000000, 51, 1, 0),
+	PLL_RATE(1248000000, 52, 1, 0),
+	PLL_RATE(1272000000, 53, 1, 0),
+	PLL_RATE(1296000000, 54, 1, 0),
+	PLL_RATE(1320000000, 55, 1, 0),
+	PLL_RATE(1344000000, 56, 1, 0),
+	PLL_RATE(1368000000, 57, 1, 0),
+	PLL_RATE(1392000000, 58, 1, 0),
+	PLL_RATE(1416000000, 59, 1, 0),
+	PLL_RATE(1440000000, 60, 1, 0),
+	PLL_RATE(1464000000, 61, 1, 0),
+	PLL_RATE(1488000000, 62, 1, 0),
+	PLL_RATE(1512000000, 63, 1, 0),
+	PLL_RATE(1536000000, 64, 1, 0),
+	PLL_RATE(1560000000, 65, 1, 0),
+	PLL_RATE(1584000000, 66, 1, 0),
+	PLL_RATE(1608000000, 67, 1, 0),
+	PLL_RATE(1632000000, 68, 1, 0),
+	PLL_RATE(1656000000, 68, 1, 0),
+	PLL_RATE(1680000000, 68, 1, 0),
+	PLL_RATE(1704000000, 68, 1, 0),
+	PLL_RATE(1728000000, 69, 1, 0),
+	PLL_RATE(1752000000, 69, 1, 0),
+	PLL_RATE(1776000000, 69, 1, 0),
+	PLL_RATE(1800000000, 69, 1, 0),
+	PLL_RATE(1824000000, 70, 1, 0),
+	PLL_RATE(1848000000, 70, 1, 0),
+	PLL_RATE(1872000000, 70, 1, 0),
+	PLL_RATE(1896000000, 70, 1, 0),
+	PLL_RATE(1920000000, 71, 1, 0),
+	PLL_RATE(1944000000, 71, 1, 0),
+	PLL_RATE(1968000000, 71, 1, 0),
+	PLL_RATE(1992000000, 71, 1, 0),
+	PLL_RATE(2016000000, 72, 1, 0),
+	PLL_RATE(2040000000, 72, 1, 0),
+	PLL_RATE(2064000000, 72, 1, 0),
+	PLL_RATE(2088000000, 72, 1, 0),
+	PLL_RATE(2112000000, 73, 1, 0),
+	{ /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+	.m = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+	.m = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_SYS_PLL_CNTL,
+		.shift   = 10,
+		.width   = 2,
+	},
+	.rate_table = sys_pll_rate_table,
+	.rate_count = ARRAY_SIZE(sys_pll_rate_table),
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+	PLL_RATE(240000000, 40, 1, 2),
+	PLL_RATE(246000000, 41, 1, 2),
+	PLL_RATE(252000000, 42, 1, 2),
+	PLL_RATE(258000000, 43, 1, 2),
+	PLL_RATE(264000000, 44, 1, 2),
+	PLL_RATE(270000000, 45, 1, 2),
+	PLL_RATE(276000000, 46, 1, 2),
+	PLL_RATE(282000000, 47, 1, 2),
+	PLL_RATE(288000000, 48, 1, 2),
+	PLL_RATE(294000000, 49, 1, 2),
+	PLL_RATE(300000000, 50, 1, 2),
+	PLL_RATE(306000000, 51, 1, 2),
+	PLL_RATE(312000000, 52, 1, 2),
+	PLL_RATE(318000000, 53, 1, 2),
+	PLL_RATE(324000000, 54, 1, 2),
+	PLL_RATE(330000000, 55, 1, 2),
+	PLL_RATE(336000000, 56, 1, 2),
+	PLL_RATE(342000000, 57, 1, 2),
+	PLL_RATE(348000000, 58, 1, 2),
+	PLL_RATE(354000000, 59, 1, 2),
+	PLL_RATE(360000000, 60, 1, 2),
+	PLL_RATE(366000000, 61, 1, 2),
+	PLL_RATE(372000000, 62, 1, 2),
+	PLL_RATE(378000000, 63, 1, 2),
+	PLL_RATE(384000000, 64, 1, 2),
+	PLL_RATE(390000000, 65, 1, 3),
+	PLL_RATE(396000000, 66, 1, 3),
+	PLL_RATE(402000000, 67, 1, 3),
+	PLL_RATE(408000000, 68, 1, 3),
+	PLL_RATE(480000000, 40, 1, 1),
+	PLL_RATE(492000000, 41, 1, 1),
+	PLL_RATE(504000000, 42, 1, 1),
+	PLL_RATE(516000000, 43, 1, 1),
+	PLL_RATE(528000000, 44, 1, 1),
+	PLL_RATE(540000000, 45, 1, 1),
+	PLL_RATE(552000000, 46, 1, 1),
+	PLL_RATE(564000000, 47, 1, 1),
+	PLL_RATE(576000000, 48, 1, 1),
+	PLL_RATE(588000000, 49, 1, 1),
+	PLL_RATE(600000000, 50, 1, 1),
+	PLL_RATE(612000000, 51, 1, 1),
+	PLL_RATE(624000000, 52, 1, 1),
+	PLL_RATE(636000000, 53, 1, 1),
+	PLL_RATE(648000000, 54, 1, 1),
+	PLL_RATE(660000000, 55, 1, 1),
+	PLL_RATE(672000000, 56, 1, 1),
+	PLL_RATE(684000000, 57, 1, 1),
+	PLL_RATE(696000000, 58, 1, 1),
+	PLL_RATE(708000000, 59, 1, 1),
+	PLL_RATE(720000000, 60, 1, 1),
+	PLL_RATE(732000000, 61, 1, 1),
+	PLL_RATE(744000000, 62, 1, 1),
+	PLL_RATE(756000000, 63, 1, 1),
+	PLL_RATE(768000000, 64, 1, 1),
+	PLL_RATE(780000000, 65, 1, 1),
+	PLL_RATE(792000000, 66, 1, 1),
+	PLL_RATE(804000000, 67, 1, 1),
+	PLL_RATE(816000000, 68, 1, 1),
+	PLL_RATE(960000000, 40, 1, 0),
+	PLL_RATE(984000000, 41, 1, 0),
+	PLL_RATE(1008000000, 42, 1, 0),
+	PLL_RATE(1032000000, 43, 1, 0),
+	PLL_RATE(1056000000, 44, 1, 0),
+	PLL_RATE(1080000000, 45, 1, 0),
+	PLL_RATE(1104000000, 46, 1, 0),
+	PLL_RATE(1128000000, 47, 1, 0),
+	PLL_RATE(1152000000, 48, 1, 0),
+	PLL_RATE(1176000000, 49, 1, 0),
+	PLL_RATE(1200000000, 50, 1, 0),
+	PLL_RATE(1224000000, 51, 1, 0),
+	PLL_RATE(1248000000, 52, 1, 0),
+	PLL_RATE(1272000000, 53, 1, 0),
+	PLL_RATE(1296000000, 54, 1, 0),
+	PLL_RATE(1320000000, 55, 1, 0),
+	PLL_RATE(1344000000, 56, 1, 0),
+	PLL_RATE(1368000000, 57, 1, 0),
+	PLL_RATE(1392000000, 58, 1, 0),
+	PLL_RATE(1416000000, 59, 1, 0),
+	PLL_RATE(1440000000, 60, 1, 0),
+	PLL_RATE(1464000000, 61, 1, 0),
+	PLL_RATE(1488000000, 62, 1, 0),
+	PLL_RATE(1512000000, 63, 1, 0),
+	PLL_RATE(1536000000, 64, 1, 0),
+	PLL_RATE(1560000000, 65, 1, 0),
+	PLL_RATE(1584000000, 66, 1, 0),
+	PLL_RATE(1608000000, 67, 1, 0),
+	PLL_RATE(1632000000, 68, 1, 0),
+	{ /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+	PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+	PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+	PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+	PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+	PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+	PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+	.m = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 0,
+		.width   = 9,
+	},
+	.n = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 9,
+		.width   = 5,
+	},
+	.od = {
+		.reg_off = HHI_GP0_PLL_CNTL,
+		.shift   = 16,
+		.width   = 2,
+	},
+	.params = {
+		.params_table = axg_gp0_params_table,
+		.params_count =	ARRAY_SIZE(axg_gp0_params_table),
+		.no_init_reset = true,
+		.reset_lock_loop = true,
+	},
+	.rate_table = axg_gp0_pll_rate_table,
+	.rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+		.flags = CLK_GET_RATE_NOCACHE,
+	},
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 15,
+		.width	 = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 14,
+		.width	 = 1,
+	},
+	.ssen = {
+		.reg_off = HHI_MPLL_CNTL,
+		.shift   = 25,
+		.width	 = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 15,
+		.width	 = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 14,
+		.width	 = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 15,
+		.width	 = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 14,
+		.width	 = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+	.sdm = {
+		.reg_off = HHI_MPLL3_CNTL0,
+		.shift   = 12,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL3_CNTL0,
+		.shift   = 11,
+		.width	 = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL3_CNTL0,
+		.shift   = 2,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL3_CNTL0,
+		.shift   = 0,
+		.width	 = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 12,
+	.flags = CLK_MUX_READ_ONLY,
+	.table = mux_table_clk81,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_mux_ro_ops,
+		/*
+		 * bits 14:12 selects from 8 possible parents:
+		 * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+		 * fclk_div4, fclk_div3, fclk_div5
+		 */
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate axg_clk81 = {
+	.reg = (void *)HHI_MPEG_CLK_CNTL,
+	.bit_idx = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+	"xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * xtal or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 25,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_mux_ops,
+		.parent_names = axg_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.shift = 16,
+	.width = 7,
+	.lock = &clk_lock,
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+	.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+	.bit_idx = 23,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.mask = 0x7,
+	.shift = 9,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_mux_ops,
+		.parent_names = axg_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.shift = 0,
+	.width = 7,
+	.lock = &clk_lock,
+	.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+	.reg = (void *)HHI_NAND_CLK_CNTL,
+	.bit_idx = 7,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &axg_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &axg_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &axg_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &axg_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &axg_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &axg_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &axg_fclk_div7.hw,
+		[CLKID_GP0_PLL]			= &axg_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &axg_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &axg_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &axg_clk81.hw,
+		[CLKID_MPLL0]			= &axg_mpll0.hw,
+		[CLKID_MPLL1]			= &axg_mpll1.hw,
+		[CLKID_MPLL2]			= &axg_mpll2.hw,
+		[CLKID_MPLL3]			= &axg_mpll3.hw,
+		[CLKID_DDR]			= &axg_ddr.hw,
+		[CLKID_AUDIO_LOCKER]		= &axg_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &axg_mipi_dsi_host.hw,
+		[CLKID_ISA]			= &axg_isa.hw,
+		[CLKID_PL301]			= &axg_pl301.hw,
+		[CLKID_PERIPHS]			= &axg_periphs.hw,
+		[CLKID_SPICC0]			= &axg_spicc_0.hw,
+		[CLKID_I2C]			= &axg_i2c.hw,
+		[CLKID_RNG0]			= &axg_rng0.hw,
+		[CLKID_UART0]			= &axg_uart0.hw,
+		[CLKID_MIPI_DSI_PHY]		= &axg_mipi_dsi_phy.hw,
+		[CLKID_SPICC1]			= &axg_spicc_1.hw,
+		[CLKID_PCIE_A]			= &axg_pcie_a.hw,
+		[CLKID_PCIE_B]			= &axg_pcie_b.hw,
+		[CLKID_HIU_IFACE]		= &axg_hiu_reg.hw,
+		[CLKID_ASSIST_MISC]		= &axg_assist_misc.hw,
+		[CLKID_SD_EMMC_B]		= &axg_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &axg_emmc_c.hw,
+		[CLKID_DMA]			= &axg_dma.hw,
+		[CLKID_SPI]			= &axg_spi.hw,
+		[CLKID_AUDIO]			= &axg_audio.hw,
+		[CLKID_ETH]			= &axg_eth_core.hw,
+		[CLKID_UART1]			= &axg_uart1.hw,
+		[CLKID_G2D]			= &axg_g2d.hw,
+		[CLKID_USB0]			= &axg_usb0.hw,
+		[CLKID_USB1]			= &axg_usb1.hw,
+		[CLKID_RESET]			= &axg_reset.hw,
+		[CLKID_USB]			= &axg_usb_general.hw,
+		[CLKID_AHB_ARB0]		= &axg_ahb_arb0.hw,
+		[CLKID_EFUSE]			= &axg_efuse.hw,
+		[CLKID_BOOT_ROM]		= &axg_boot_rom.hw,
+		[CLKID_AHB_DATA_BUS]		= &axg_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &axg_ahb_ctrl_bus.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &axg_usb1_to_ddr.hw,
+		[CLKID_USB0_DDR_BRIDGE]		= &axg_usb0_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &axg_mmc_pclk.hw,
+		[CLKID_VPU_INTR]		= &axg_vpu_intr.hw,
+		[CLKID_SEC_AHB_AHB3_BRIDGE]	= &axg_sec_ahb_ahb3_bridge.hw,
+		[CLKID_GIC]			= &axg_gic.hw,
+		[CLKID_AO_MEDIA_CPU]		= &axg_ao_media_cpu.hw,
+		[CLKID_AO_AHB_SRAM]		= &axg_ao_ahb_sram.hw,
+		[CLKID_AO_AHB_BUS]		= &axg_ao_ahb_bus.hw,
+		[CLKID_AO_IFACE]		= &axg_ao_iface.hw,
+		[CLKID_AO_I2C]			= &axg_ao_i2c.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &axg_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &axg_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &axg_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &axg_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &axg_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &axg_sd_emmc_c_clk0.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+	&axg_fixed_pll,
+	&axg_sys_pll,
+	&axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+	&axg_mpll0,
+	&axg_mpll1,
+	&axg_mpll2,
+	&axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+	&axg_clk81,
+	&axg_ddr,
+	&axg_audio_locker,
+	&axg_mipi_dsi_host,
+	&axg_isa,
+	&axg_pl301,
+	&axg_periphs,
+	&axg_spicc_0,
+	&axg_i2c,
+	&axg_rng0,
+	&axg_uart0,
+	&axg_mipi_dsi_phy,
+	&axg_spicc_1,
+	&axg_pcie_a,
+	&axg_pcie_b,
+	&axg_hiu_reg,
+	&axg_assist_misc,
+	&axg_emmc_b,
+	&axg_emmc_c,
+	&axg_dma,
+	&axg_spi,
+	&axg_audio,
+	&axg_eth_core,
+	&axg_uart1,
+	&axg_g2d,
+	&axg_usb0,
+	&axg_usb1,
+	&axg_reset,
+	&axg_usb_general,
+	&axg_ahb_arb0,
+	&axg_efuse,
+	&axg_boot_rom,
+	&axg_ahb_data_bus,
+	&axg_ahb_ctrl_bus,
+	&axg_usb1_to_ddr,
+	&axg_usb0_to_ddr,
+	&axg_mmc_pclk,
+	&axg_vpu_intr,
+	&axg_sec_ahb_ahb3_bridge,
+	&axg_gic,
+	&axg_ao_media_cpu,
+	&axg_ao_ahb_sram,
+	&axg_ao_ahb_bus,
+	&axg_ao_iface,
+	&axg_ao_i2c,
+	&axg_sd_emmc_b_clk0,
+	&axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+	&axg_mpeg_clk_sel,
+	&axg_sd_emmc_b_clk0_sel,
+	&axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+	&axg_mpeg_clk_div,
+	&axg_sd_emmc_b_clk0_div,
+	&axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+	struct clk_gate *const *clk_gates;
+	unsigned int clk_gates_count;
+	struct meson_clk_mpll *const *clk_mplls;
+	unsigned int clk_mplls_count;
+	struct meson_clk_pll *const *clk_plls;
+	unsigned int clk_plls_count;
+	struct clk_mux *const *clk_muxes;
+	unsigned int clk_muxes_count;
+	struct clk_divider *const *clk_dividers;
+	unsigned int clk_dividers_count;
+	struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+	.clk_gates = axg_clk_gates,
+	.clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+	.clk_mplls = axg_clk_mplls,
+	.clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+	.clk_plls = axg_clk_plls,
+	.clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+	.clk_muxes = axg_clk_muxes,
+	.clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+	.clk_dividers = axg_clk_dividers,
+	.clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+	.hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+	{}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct clkc_data *clkc_data;
+	struct resource *res;
+	void __iomem *clk_base;
+	int ret, clkid, i;
+
+	clkc_data = of_device_get_match_data(&pdev->dev);
+	if (!clkc_data)
+		return -EINVAL;
+
+	/*  Generic clocks and PLLs */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (IS_ERR(clk_base)) {
+		dev_err(&pdev->dev, "Unable to map clk base\n");
+		return -ENXIO;
+	}
+
+	/* Populate base address for PLLs */
+	for (i = 0; i < clkc_data->clk_plls_count; i++)
+		clkc_data->clk_plls[i]->base = clk_base;
+
+	/* Populate base address for MPLLs */
+	for (i = 0; i < clkc_data->clk_mplls_count; i++)
+		clkc_data->clk_mplls[i]->base = clk_base;
+
+	/* Populate base address for gates */
+	for (i = 0; i < clkc_data->clk_gates_count; i++)
+		clkc_data->clk_gates[i]->reg = clk_base +
+			(u64)clkc_data->clk_gates[i]->reg;
+
+	/* Populate base address for muxes */
+	for (i = 0; i < clkc_data->clk_muxes_count; i++)
+		clkc_data->clk_muxes[i]->reg = clk_base +
+			(u64)clkc_data->clk_muxes[i]->reg;
+
+	/* Populate base address for dividers */
+	for (i = 0; i < clkc_data->clk_dividers_count; i++)
+		clkc_data->clk_dividers[i]->reg = clk_base +
+			(u64)clkc_data->clk_dividers[i]->reg;
+
+	for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+		/* array might be sparse */
+		if (!clkc_data->hw_onecell_data->hws[clkid])
+			continue;
+
+		ret = devm_clk_hw_register(dev,
+					clkc_data->hw_onecell_data->hws[clkid]);
+		if (ret) {
+			dev_err(&pdev->dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+			clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+	.probe		= axg_clkc_probe,
+	.driver		= {
+		.name	= "axg-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@ 
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL		0x40
+#define HHI_GP0_PLL_CNTL2		0x44
+#define HHI_GP0_PLL_CNTL3		0x48
+#define HHI_GP0_PLL_CNTL4		0x4c
+#define HHI_GP0_PLL_CNTL5		0x50
+#define HHI_GP0_PLL_STS			0x54
+#define HHI_GP0_PLL_CNTL1		0x58
+#define HHI_HIFI_PLL_CNTL		0x80
+#define HHI_HIFI_PLL_CNTL2		0x84
+#define HHI_HIFI_PLL_CNTL3		0x88
+#define HHI_HIFI_PLL_CNTL4		0x8C
+#define HHI_HIFI_PLL_CNTL5		0x90
+#define HHI_HIFI_PLL_STS		0x94
+#define HHI_HIFI_PLL_CNTL1		0x98
+
+#define HHI_XTAL_DIVN_CNTL		0xbc
+#define HHI_GCLK2_MPEG0			0xc0
+#define HHI_GCLK2_MPEG1			0xc4
+#define HHI_GCLK2_MPEG2			0xc8
+#define HHI_GCLK2_OTHER			0xd0
+#define HHI_GCLK2_AO			0xd4
+#define HHI_PCIE_PLL_CNTL		0xd8
+#define HHI_PCIE_PLL_CNTL1		0xdC
+#define HHI_PCIE_PLL_CNTL2		0xe0
+#define HHI_PCIE_PLL_CNTL3		0xe4
+#define HHI_PCIE_PLL_CNTL4		0xe8
+#define HHI_PCIE_PLL_CNTL5		0xec
+#define HHI_PCIE_PLL_CNTL6		0xf0
+#define HHI_PCIE_PLL_STS		0xf4
+
+#define HHI_MEM_PD_REG0			0x100
+#define HHI_VPU_MEM_PD_REG0		0x104
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12c
+
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_AO			0x154
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c
+#define HHI_SYS_CPU_RESET_CNTL		0x160
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_SPICC_HCLK_CNTL		0x168
+
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1a0
+#define HHI_VPU_CLK_CNTL		0x1bC
+
+#define HHI_VAPBCLK_CNTL		0x1F4
+
+#define HHI_GEN_CLK_CNTL		0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+
+#define HHI_MPLL_CNTL			0x280
+#define HHI_MPLL_CNTL2			0x284
+#define HHI_MPLL_CNTL3			0x288
+#define HHI_MPLL_CNTL4			0x28C
+#define HHI_MPLL_CNTL5			0x290
+#define HHI_MPLL_CNTL6			0x294
+#define HHI_MPLL_CNTL7			0x298
+#define HHI_MPLL_CNTL8			0x29C
+#define HHI_MPLL_CNTL9			0x2A0
+#define HHI_MPLL_CNTL10			0x2A4
+
+#define HHI_MPLL3_CNTL0			0x2E0
+#define HHI_MPLL3_CNTL1			0x2E4
+#define HHI_PLL_TOP_MISC		0x2E8
+
+#define HHI_SYS_PLL_CNTL1		0x2FC
+#define HHI_SYS_PLL_CNTL		0x300
+#define HHI_SYS_PLL_CNTL2		0x304
+#define HHI_SYS_PLL_CNTL3		0x308
+#define HHI_SYS_PLL_CNTL4		0x30c
+#define HHI_SYS_PLL_CNTL5		0x310
+#define HHI_SYS_PLL_STS			0x314
+#define HHI_DPLL_TOP_I			0x318
+#define HHI_DPLL_TOP2_I			0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL		61
+#define CLKID_SD_EMMC_B_CLK0_DIV		62
+#define CLKID_SD_EMMC_C_CLK0_SEL		63
+#define CLKID_SD_EMMC_C_CLK0_DIV		64
+
+#define NR_CLKS					65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */