| Message ID | 4357a69da97f46a324eec4c766f4bc9d9e7733ff.1490545262.git-series.plaes@plaes.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > Convert sun4i-a10.dtsi to new CCU driver. > > Signed-off-by: Priit Laes <plaes@plaes.org> I finally got around to bisecting a mainline boot failure on sun4i-a10-cubieboard that's been happening for quite a while. Based on on kernelci.org, it showed up sometime during the v4.15 merge window[1]. It bisected down to this commit (in mainline as commit 41193869f2bdb585ce09bfdd16d9482aadd560ad). When it fails, there is no output on the serial console, so I don't know exactly how it's failing, just that it no longer boots. Kevin [1] https://kernelci.org/boot/id/5a2e10cd59b51430a9afa173/ > --- > arch/arm/boot/dts/sun4i-a10.dtsi | 636 ++++---------------------------- > 1 file changed, 82 insertions(+), 554 deletions(-) > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index ba20b48..0d8320a 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -45,7 +45,8 @@ > > #include <dt-bindings/thermal/thermal.h> > > -#include <dt-bindings/clock/sun4i-a10-pll2.h> > +#include <dt-bindings/clock/sunxi-a10-a20-ccu.h> > +#include <dt-bindings/reset/sunxi-a10-a20-ccu.h> > #include <dt-bindings/dma/sun4i-a10.h> > #include <dt-bindings/pinctrl/sun4i-a10.h> > > @@ -65,9 +66,9 @@ > compatible = "allwinner,simple-framebuffer", > "simple-framebuffer"; > allwinner,pipeline = "de_be0-lcd0-hdmi"; > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > - <&ahb_gates 44>, <&de_be0_clk>, > - <&tcon0_ch1_clk>, <&dram_gates 26>; > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; > status = "disabled"; > }; > > @@ -75,10 +76,11 @@ > compatible = "allwinner,simple-framebuffer", > "simple-framebuffer"; > allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > - <&ahb_gates 44>, <&ahb_gates 46>, > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, > - <&dram_gates 25>, <&dram_gates 26>; > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > + <&ccu CLK_TCON0_CH1>, > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > status = "disabled"; > }; > > @@ -86,9 +88,10 @@ > compatible = "allwinner,simple-framebuffer", > "simple-framebuffer"; > allwinner,pipeline = "de_fe0-de_be0-lcd0"; > - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, > - <&dram_gates 25>, <&dram_gates 26>; > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, > + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, > + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > status = "disabled"; > }; > > @@ -96,11 +99,11 @@ > compatible = "allwinner,simple-framebuffer", > "simple-framebuffer"; > allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; > - clocks = <&ahb_gates 34>, <&ahb_gates 36>, > - <&ahb_gates 44>, <&ahb_gates 46>, > - <&de_be0_clk>, <&de_fe0_clk>, > - <&tcon0_ch1_clk>, <&dram_gates 5>, > - <&dram_gates 25>, <&dram_gates 26>; > + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > status = "disabled"; > }; > }; > @@ -112,7 +115,7 @@ > device_type = "cpu"; > compatible = "arm,cortex-a8"; > reg = <0x0>; > - clocks = <&cpu>; > + clocks = <&ccu CLK_CPU>; > clock-latency = <244144>; /* 8 32k periods */ > operating-points = < > /* kHz uV */ > @@ -168,18 +171,6 @@ > #size-cells = <1>; > ranges; > > - /* > - * This is a dummy clock, to be used as placeholder on > - * other mux clocks when a specific parent clock is not > - * yet implemented. It should be dropped when the driver > - * is complete. > - */ > - dummy: dummy { > - #clock-cells = <0>; > - compatible = "fixed-clock"; > - clock-frequency = <0>; > - }; > - > osc24M: clk@01c20050 { > #clock-cells = <0>; > compatible = "allwinner,sun4i-a10-osc-clk"; > @@ -188,487 +179,12 @@ > clock-output-names = "osc24M"; > }; > > - osc3M: osc3M_clk { > - compatible = "fixed-factor-clock"; > - #clock-cells = <0>; > - clock-div = <8>; > - clock-mult = <1>; > - clocks = <&osc24M>; > - clock-output-names = "osc3M"; > - }; > - > osc32k: clk@0 { > #clock-cells = <0>; > compatible = "fixed-clock"; > clock-frequency = <32768>; > clock-output-names = "osc32k"; > }; > - > - pll1: clk@01c20000 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll1-clk"; > - reg = <0x01c20000 0x4>; > - clocks = <&osc24M>; > - clock-output-names = "pll1"; > - }; > - > - pll2: clk@01c20008 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-pll2-clk"; > - reg = <0x01c20008 0x8>; > - clocks = <&osc24M>; > - clock-output-names = "pll2-1x", "pll2-2x", > - "pll2-4x", "pll2-8x"; > - }; > - > - pll3: clk@01c20010 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll3-clk"; > - reg = <0x01c20010 0x4>; > - clocks = <&osc3M>; > - clock-output-names = "pll3"; > - }; > - > - pll3x2: pll3x2_clk { > - compatible = "fixed-factor-clock"; > - #clock-cells = <0>; > - clock-div = <1>; > - clock-mult = <2>; > - clocks = <&pll3>; > - clock-output-names = "pll3-2x"; > - }; > - > - pll4: clk@01c20018 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll1-clk"; > - reg = <0x01c20018 0x4>; > - clocks = <&osc24M>; > - clock-output-names = "pll4"; > - }; > - > - pll5: clk@01c20020 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-pll5-clk"; > - reg = <0x01c20020 0x4>; > - clocks = <&osc24M>; > - clock-output-names = "pll5_ddr", "pll5_other"; > - }; > - > - pll6: clk@01c20028 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-pll6-clk"; > - reg = <0x01c20028 0x4>; > - clocks = <&osc24M>; > - clock-output-names = "pll6_sata", "pll6_other", "pll6"; > - }; > - > - pll7: clk@01c20030 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-pll3-clk"; > - reg = <0x01c20030 0x4>; > - clocks = <&osc3M>; > - clock-output-names = "pll7"; > - }; > - > - pll7x2: pll7x2_clk { > - compatible = "fixed-factor-clock"; > - #clock-cells = <0>; > - clock-div = <1>; > - clock-mult = <2>; > - clocks = <&pll7>; > - clock-output-names = "pll7-2x"; > - }; > - > - /* dummy is 200M */ > - cpu: cpu@01c20054 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-cpu-clk"; > - reg = <0x01c20054 0x4>; > - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; > - clock-output-names = "cpu"; > - }; > - > - axi: axi@01c20054 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-axi-clk"; > - reg = <0x01c20054 0x4>; > - clocks = <&cpu>; > - clock-output-names = "axi"; > - }; > - > - axi_gates: clk@01c2005c { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-axi-gates-clk"; > - reg = <0x01c2005c 0x4>; > - clocks = <&axi>; > - clock-indices = <0>; > - clock-output-names = "axi_dram"; > - }; > - > - ahb: ahb@01c20054 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-ahb-clk"; > - reg = <0x01c20054 0x4>; > - clocks = <&axi>; > - clock-output-names = "ahb"; > - }; > - > - ahb_gates: clk@01c20060 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; > - reg = <0x01c20060 0x8>; > - clocks = <&ahb>; > - clock-indices = <0>, <1>, > - <2>, <3>, > - <4>, <5>, <6>, > - <7>, <8>, <9>, > - <10>, <11>, <12>, > - <13>, <14>, <16>, > - <17>, <18>, <20>, > - <21>, <22>, <23>, > - <24>, <25>, <26>, > - <32>, <33>, <34>, > - <35>, <36>, <37>, > - <40>, <41>, <43>, > - <44>, <45>, > - <46>, <47>, > - <50>, <52>; > - clock-output-names = "ahb_usb0", "ahb_ehci0", > - "ahb_ohci0", "ahb_ehci1", > - "ahb_ohci1", "ahb_ss", "ahb_dma", > - "ahb_bist", "ahb_mmc0", "ahb_mmc1", > - "ahb_mmc2", "ahb_mmc3", "ahb_ms", > - "ahb_nand", "ahb_sdram", "ahb_ace", > - "ahb_emac", "ahb_ts", "ahb_spi0", > - "ahb_spi1", "ahb_spi2", "ahb_spi3", > - "ahb_pata", "ahb_sata", "ahb_gps", > - "ahb_ve", "ahb_tvd", "ahb_tve0", > - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", > - "ahb_csi0", "ahb_csi1", "ahb_hdmi", > - "ahb_de_be0", "ahb_de_be1", > - "ahb_de_fe0", "ahb_de_fe1", > - "ahb_mp", "ahb_mali400"; > - }; > - > - apb0: apb0@01c20054 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-apb0-clk"; > - reg = <0x01c20054 0x4>; > - clocks = <&ahb>; > - clock-output-names = "apb0"; > - }; > - > - apb0_gates: clk@01c20068 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; > - reg = <0x01c20068 0x4>; > - clocks = <&apb0>; > - clock-indices = <0>, <1>, > - <2>, <3>, > - <5>, <6>, > - <7>, <10>; > - clock-output-names = "apb0_codec", "apb0_spdif", > - "apb0_ac97", "apb0_iis", > - "apb0_pio", "apb0_ir0", > - "apb0_ir1", "apb0_keypad"; > - }; > - > - apb1: clk@01c20058 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-apb1-clk"; > - reg = <0x01c20058 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; > - clock-output-names = "apb1"; > - }; > - > - apb1_gates: clk@01c2006c { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; > - reg = <0x01c2006c 0x4>; > - clocks = <&apb1>; > - clock-indices = <0>, <1>, > - <2>, <4>, > - <5>, <6>, > - <7>, <16>, > - <17>, <18>, > - <19>, <20>, > - <21>, <22>, > - <23>; > - clock-output-names = "apb1_i2c0", "apb1_i2c1", > - "apb1_i2c2", "apb1_can", > - "apb1_scr", "apb1_ps20", > - "apb1_ps21", "apb1_uart0", > - "apb1_uart1", "apb1_uart2", > - "apb1_uart3", "apb1_uart4", > - "apb1_uart5", "apb1_uart6", > - "apb1_uart7"; > - }; > - > - nand_clk: clk@01c20080 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c20080 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "nand"; > - }; > - > - ms_clk: clk@01c20084 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c20084 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "ms"; > - }; > - > - mmc0_clk: clk@01c20088 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-mmc-clk"; > - reg = <0x01c20088 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "mmc0", > - "mmc0_output", > - "mmc0_sample"; > - }; > - > - mmc1_clk: clk@01c2008c { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-mmc-clk"; > - reg = <0x01c2008c 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "mmc1", > - "mmc1_output", > - "mmc1_sample"; > - }; > - > - mmc2_clk: clk@01c20090 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-mmc-clk"; > - reg = <0x01c20090 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "mmc2", > - "mmc2_output", > - "mmc2_sample"; > - }; > - > - mmc3_clk: clk@01c20094 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-mmc-clk"; > - reg = <0x01c20094 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "mmc3", > - "mmc3_output", > - "mmc3_sample"; > - }; > - > - ts_clk: clk@01c20098 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c20098 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "ts"; > - }; > - > - ss_clk: clk@01c2009c { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c2009c 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "ss"; > - }; > - > - spi0_clk: clk@01c200a0 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200a0 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "spi0"; > - }; > - > - spi1_clk: clk@01c200a4 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200a4 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "spi1"; > - }; > - > - spi2_clk: clk@01c200a8 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200a8 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "spi2"; > - }; > - > - pata_clk: clk@01c200ac { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200ac 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "pata"; > - }; > - > - ir0_clk: clk@01c200b0 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200b0 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "ir0"; > - }; > - > - ir1_clk: clk@01c200b4 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200b4 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "ir1"; > - }; > - > - spdif_clk: clk@01c200c0 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod1-clk"; > - reg = <0x01c200c0 0x4>; > - clocks = <&pll2 SUN4I_A10_PLL2_8X>, > - <&pll2 SUN4I_A10_PLL2_4X>, > - <&pll2 SUN4I_A10_PLL2_2X>, > - <&pll2 SUN4I_A10_PLL2_1X>; > - clock-output-names = "spdif"; > - }; > - > - usb_clk: clk@01c200cc { > - #clock-cells = <1>; > - #reset-cells = <1>; > - compatible = "allwinner,sun4i-a10-usb-clk"; > - reg = <0x01c200cc 0x4>; > - clocks = <&pll6 1>; > - clock-output-names = "usb_ohci0", "usb_ohci1", > - "usb_phy"; > - }; > - > - spi3_clk: clk@01c200d4 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-mod0-clk"; > - reg = <0x01c200d4 0x4>; > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > - clock-output-names = "spi3"; > - }; > - > - dram_gates: clk@01c20100 { > - #clock-cells = <1>; > - compatible = "allwinner,sun4i-a10-dram-gates-clk"; > - reg = <0x01c20100 0x4>; > - clocks = <&pll5 0>; > - clock-indices = <0>, > - <1>, <2>, > - <3>, > - <4>, > - <5>, <6>, > - <15>, > - <24>, <25>, > - <26>, <27>, > - <28>, <29>; > - clock-output-names = "dram_ve", > - "dram_csi0", "dram_csi1", > - "dram_ts", > - "dram_tvd", > - "dram_tve0", "dram_tve1", > - "dram_output", > - "dram_de_fe1", "dram_de_fe0", > - "dram_de_be0", "dram_de_be1", > - "dram_de_mp", "dram_ace"; > - }; > - > - de_be0_clk: clk@01c20104 { > - #clock-cells = <0>; > - #reset-cells = <0>; > - compatible = "allwinner,sun4i-a10-display-clk"; > - reg = <0x01c20104 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > - clock-output-names = "de-be0"; > - }; > - > - de_be1_clk: clk@01c20108 { > - #clock-cells = <0>; > - #reset-cells = <0>; > - compatible = "allwinner,sun4i-a10-display-clk"; > - reg = <0x01c20108 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > - clock-output-names = "de-be1"; > - }; > - > - de_fe0_clk: clk@01c2010c { > - #clock-cells = <0>; > - #reset-cells = <0>; > - compatible = "allwinner,sun4i-a10-display-clk"; > - reg = <0x01c2010c 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > - clock-output-names = "de-fe0"; > - }; > - > - de_fe1_clk: clk@01c20110 { > - #clock-cells = <0>; > - #reset-cells = <0>; > - compatible = "allwinner,sun4i-a10-display-clk"; > - reg = <0x01c20110 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > - clock-output-names = "de-fe1"; > - }; > - > - > - tcon0_ch0_clk: clk@01c20118 { > - #clock-cells = <0>; > - #reset-cells = <1>; > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > - reg = <0x01c20118 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > - clock-output-names = "tcon0-ch0-sclk"; > - > - }; > - > - tcon1_ch0_clk: clk@01c2011c { > - #clock-cells = <0>; > - #reset-cells = <1>; > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > - reg = <0x01c2011c 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > - clock-output-names = "tcon1-ch0-sclk"; > - > - }; > - > - tcon0_ch1_clk: clk@01c2012c { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > - reg = <0x01c2012c 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > - clock-output-names = "tcon0-ch1-sclk"; > - > - }; > - > - tcon1_ch1_clk: clk@01c20130 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > - reg = <0x01c20130 0x4>; > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > - clock-output-names = "tcon1-ch1-sclk"; > - > - }; > - > - ve_clk: clk@01c2013c { > - #clock-cells = <0>; > - #reset-cells = <0>; > - compatible = "allwinner,sun4i-a10-ve-clk"; > - reg = <0x01c2013c 0x4>; > - clocks = <&pll4>; > - clock-output-names = "ve"; > - }; > - > - codec_clk: clk@01c20140 { > - #clock-cells = <0>; > - compatible = "allwinner,sun4i-a10-codec-clk"; > - reg = <0x01c20140 0x4>; > - clocks = <&pll2 SUN4I_A10_PLL2_1X>; > - clock-output-names = "codec"; > - }; > }; > > soc@01c00000 { > @@ -717,7 +233,7 @@ > compatible = "allwinner,sun4i-a10-dma"; > reg = <0x01c02000 0x1000>; > interrupts = <27>; > - clocks = <&ahb_gates 6>; > + clocks = <&ccu CLK_AHB_DMA>; > #dma-cells = <2>; > }; > > @@ -725,7 +241,7 @@ > compatible = "allwinner,sun4i-a10-nand"; > reg = <0x01c03000 0x1000>; > interrupts = <37>; > - clocks = <&ahb_gates 13>, <&nand_clk>; > + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; > clock-names = "ahb", "mod"; > dmas = <&dma SUN4I_DMA_DEDICATED 3>; > dma-names = "rxtx"; > @@ -738,7 +254,7 @@ > compatible = "allwinner,sun4i-a10-spi"; > reg = <0x01c05000 0x1000>; > interrupts = <10>; > - clocks = <&ahb_gates 20>, <&spi0_clk>; > + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; > clock-names = "ahb", "mod"; > dmas = <&dma SUN4I_DMA_DEDICATED 27>, > <&dma SUN4I_DMA_DEDICATED 26>; > @@ -752,7 +268,7 @@ > compatible = "allwinner,sun4i-a10-spi"; > reg = <0x01c06000 0x1000>; > interrupts = <11>; > - clocks = <&ahb_gates 21>, <&spi1_clk>; > + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; > clock-names = "ahb", "mod"; > dmas = <&dma SUN4I_DMA_DEDICATED 9>, > <&dma SUN4I_DMA_DEDICATED 8>; > @@ -766,7 +282,7 @@ > compatible = "allwinner,sun4i-a10-emac"; > reg = <0x01c0b000 0x1000>; > interrupts = <55>; > - clocks = <&ahb_gates 17>; > + clocks = <&ccu CLK_AHB_EMAC>; > allwinner,sram = <&emac_sram 1>; > status = "disabled"; > }; > @@ -782,10 +298,10 @@ > mmc0: mmc@01c0f000 { > compatible = "allwinner,sun4i-a10-mmc"; > reg = <0x01c0f000 0x1000>; > - clocks = <&ahb_gates 8>, > - <&mmc0_clk 0>, > - <&mmc0_clk 1>, > - <&mmc0_clk 2>; > + clocks = <&ccu CLK_AHB_MMC0>, > + <&ccu CLK_MMC0>, > + <&ccu CLK_MMC0_OUTPUT>, > + <&ccu CLK_MMC0_SAMPLE>; > clock-names = "ahb", > "mmc", > "output", > @@ -799,10 +315,10 @@ > mmc1: mmc@01c10000 { > compatible = "allwinner,sun4i-a10-mmc"; > reg = <0x01c10000 0x1000>; > - clocks = <&ahb_gates 9>, > - <&mmc1_clk 0>, > - <&mmc1_clk 1>, > - <&mmc1_clk 2>; > + clocks = <&ccu CLK_AHB_MMC1>, > + <&ccu CLK_MMC1>, > + <&ccu CLK_MMC1_OUTPUT>, > + <&ccu CLK_MMC1_SAMPLE>; > clock-names = "ahb", > "mmc", > "output", > @@ -816,10 +332,10 @@ > mmc2: mmc@01c11000 { > compatible = "allwinner,sun4i-a10-mmc"; > reg = <0x01c11000 0x1000>; > - clocks = <&ahb_gates 10>, > - <&mmc2_clk 0>, > - <&mmc2_clk 1>, > - <&mmc2_clk 2>; > + clocks = <&ccu CLK_AHB_MMC2>, > + <&ccu CLK_MMC2>, > + <&ccu CLK_MMC2_OUTPUT>, > + <&ccu CLK_MMC2_SAMPLE>; > clock-names = "ahb", > "mmc", > "output", > @@ -833,10 +349,10 @@ > mmc3: mmc@01c12000 { > compatible = "allwinner,sun4i-a10-mmc"; > reg = <0x01c12000 0x1000>; > - clocks = <&ahb_gates 11>, > - <&mmc3_clk 0>, > - <&mmc3_clk 1>, > - <&mmc3_clk 2>; > + clocks = <&ccu CLK_AHB_MMC3>, > + <&ccu CLK_MMC3>, > + <&ccu CLK_MMC3_OUTPUT>, > + <&ccu CLK_MMC3_SAMPLE>; > clock-names = "ahb", > "mmc", > "output", > @@ -850,7 +366,7 @@ > usb_otg: usb@01c13000 { > compatible = "allwinner,sun4i-a10-musb"; > reg = <0x01c13000 0x0400>; > - clocks = <&ahb_gates 0>; > + clocks = <&ccu CLK_AHB_OTG>; > interrupts = <38>; > interrupt-names = "mc"; > phys = <&usbphy 0>; > @@ -865,9 +381,11 @@ > compatible = "allwinner,sun4i-a10-usb-phy"; > reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; > reg-names = "phy_ctrl", "pmu1", "pmu2"; > - clocks = <&usb_clk 8>; > + clocks = <&ccu CLK_USB_PHY>; > clock-names = "usb_phy"; > - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; > + resets = <&ccu RST_USB_PHY0>, > + <&ccu RST_USB_PHY1>, > + <&ccu RST_USB_PHY2>; > reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; > status = "disabled"; > }; > @@ -876,7 +394,7 @@ > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > reg = <0x01c14000 0x100>; > interrupts = <39>; > - clocks = <&ahb_gates 1>; > + clocks = <&ccu CLK_AHB_EHCI0>; > phys = <&usbphy 1>; > phy-names = "usb"; > status = "disabled"; > @@ -886,7 +404,7 @@ > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > reg = <0x01c14400 0x100>; > interrupts = <64>; > - clocks = <&usb_clk 6>, <&ahb_gates 2>; > + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; > phys = <&usbphy 1>; > phy-names = "usb"; > status = "disabled"; > @@ -896,7 +414,7 @@ > compatible = "allwinner,sun4i-a10-crypto"; > reg = <0x01c15000 0x1000>; > interrupts = <86>; > - clocks = <&ahb_gates 5>, <&ss_clk>; > + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; > clock-names = "ahb", "mod"; > }; > > @@ -904,7 +422,7 @@ > compatible = "allwinner,sun4i-a10-spi"; > reg = <0x01c17000 0x1000>; > interrupts = <12>; > - clocks = <&ahb_gates 22>, <&spi2_clk>; > + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; > clock-names = "ahb", "mod"; > dmas = <&dma SUN4I_DMA_DEDICATED 29>, > <&dma SUN4I_DMA_DEDICATED 28>; > @@ -918,7 +436,8 @@ > compatible = "allwinner,sun4i-a10-ahci"; > reg = <0x01c18000 0x1000>; > interrupts = <56>; > - clocks = <&pll6 0>, <&ahb_gates 25>; > + clocks = <&ccu CLK_PLL_PERIPH_SATA>, > + <&ccu CLK_AHB_SATA>; > status = "disabled"; > }; > > @@ -926,7 +445,7 @@ > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > reg = <0x01c1c000 0x100>; > interrupts = <40>; > - clocks = <&ahb_gates 3>; > + clocks = <&ccu CLK_AHB_EHCI1>; > phys = <&usbphy 2>; > phy-names = "usb"; > status = "disabled"; > @@ -936,7 +455,7 @@ > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > reg = <0x01c1c400 0x100>; > interrupts = <65>; > - clocks = <&usb_clk 7>, <&ahb_gates 4>; > + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; > phys = <&usbphy 2>; > phy-names = "usb"; > status = "disabled"; > @@ -946,7 +465,7 @@ > compatible = "allwinner,sun4i-a10-spi"; > reg = <0x01c1f000 0x1000>; > interrupts = <50>; > - clocks = <&ahb_gates 23>, <&spi3_clk>; > + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; > clock-names = "ahb", "mod"; > dmas = <&dma SUN4I_DMA_DEDICATED 31>, > <&dma SUN4I_DMA_DEDICATED 30>; > @@ -956,6 +475,15 @@ > #size-cells = <0>; > }; > > + ccu: clock@01c20000 { > + compatible = "allwinner,sun4i-a10-ccu"; > + reg = <0x01c20000 0x400>; > + clocks = <&osc24M>, <&osc32k>; > + clock-names = "hosc", "losc"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > intc: interrupt-controller@01c20400 { > compatible = "allwinner,sun4i-a10-ic"; > reg = <0x01c20400 0x400>; > @@ -967,7 +495,7 @@ > compatible = "allwinner,sun4i-a10-pinctrl"; > reg = <0x01c20800 0x400>; > interrupts = <28>; > - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; > + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; > clock-names = "apb", "hosc", "losc"; > gpio-controller; > interrupt-controller; > @@ -1145,7 +673,7 @@ > compatible = "allwinner,sun4i-a10-spdif"; > reg = <0x01c21000 0x400>; > interrupts = <13>; > - clocks = <&apb0_gates 1>, <&spdif_clk>; > + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; > clock-names = "apb", "spdif"; > dmas = <&dma SUN4I_DMA_NORMAL 2>, > <&dma SUN4I_DMA_NORMAL 2>; > @@ -1155,7 +683,7 @@ > > ir0: ir@01c21800 { > compatible = "allwinner,sun4i-a10-ir"; > - clocks = <&apb0_gates 6>, <&ir0_clk>; > + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; > clock-names = "apb", "ir"; > interrupts = <5>; > reg = <0x01c21800 0x40>; > @@ -1164,7 +692,7 @@ > > ir1: ir@01c21c00 { > compatible = "allwinner,sun4i-a10-ir"; > - clocks = <&apb0_gates 7>, <&ir1_clk>; > + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; > clock-names = "apb", "ir"; > interrupts = <6>; > reg = <0x01c21c00 0x40>; > @@ -1183,7 +711,7 @@ > compatible = "allwinner,sun4i-a10-codec"; > reg = <0x01c22c00 0x40>; > interrupts = <30>; > - clocks = <&apb0_gates 0>, <&codec_clk>; > + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; > clock-names = "apb", "codec"; > dmas = <&dma SUN4I_DMA_NORMAL 19>, > <&dma SUN4I_DMA_NORMAL 19>; > @@ -1209,7 +737,7 @@ > interrupts = <1>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 16>; > + clocks = <&ccu CLK_APB1_UART0>; > status = "disabled"; > }; > > @@ -1219,7 +747,7 @@ > interrupts = <2>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 17>; > + clocks = <&ccu CLK_APB1_UART1>; > status = "disabled"; > }; > > @@ -1229,7 +757,7 @@ > interrupts = <3>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 18>; > + clocks = <&ccu CLK_APB1_UART2>; > status = "disabled"; > }; > > @@ -1239,7 +767,7 @@ > interrupts = <4>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 19>; > + clocks = <&ccu CLK_APB1_UART3>; > status = "disabled"; > }; > > @@ -1249,7 +777,7 @@ > interrupts = <17>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 20>; > + clocks = <&ccu CLK_APB1_UART4>; > status = "disabled"; > }; > > @@ -1259,7 +787,7 @@ > interrupts = <18>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 21>; > + clocks = <&ccu CLK_APB1_UART5>; > status = "disabled"; > }; > > @@ -1269,7 +797,7 @@ > interrupts = <19>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 22>; > + clocks = <&ccu CLK_APB1_UART6>; > status = "disabled"; > }; > > @@ -1279,7 +807,7 @@ > interrupts = <20>; > reg-shift = <2>; > reg-io-width = <4>; > - clocks = <&apb1_gates 23>; > + clocks = <&ccu CLK_APB1_UART7>; > status = "disabled"; > }; > > @@ -1287,7 +815,7 @@ > compatible = "allwinner,sun4i-a10-i2c"; > reg = <0x01c2ac00 0x400>; > interrupts = <7>; > - clocks = <&apb1_gates 0>; > + clocks = <&ccu CLK_APB1_I2C0>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > @@ -1297,7 +825,7 @@ > compatible = "allwinner,sun4i-a10-i2c"; > reg = <0x01c2b000 0x400>; > interrupts = <8>; > - clocks = <&apb1_gates 1>; > + clocks = <&ccu CLK_APB1_I2C1>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > @@ -1307,7 +835,7 @@ > compatible = "allwinner,sun4i-a10-i2c"; > reg = <0x01c2b400 0x400>; > interrupts = <9>; > - clocks = <&apb1_gates 2>; > + clocks = <&ccu CLK_APB1_I2C2>; > status = "disabled"; > #address-cells = <1>; > #size-cells = <0>; > @@ -1317,7 +845,7 @@ > compatible = "allwinner,sun4i-a10-ps2"; > reg = <0x01c2a000 0x400>; > interrupts = <62>; > - clocks = <&apb1_gates 6>; > + clocks = <&ccu CLK_APB1_PS20>; > status = "disabled"; > }; > > @@ -1325,7 +853,7 @@ > compatible = "allwinner,sun4i-a10-ps2"; > reg = <0x01c2a400 0x400>; > interrupts = <63>; > - clocks = <&apb1_gates 7>; > + clocks = <&ccu CLK_APB1_PS21>; > status = "disabled"; > }; > }; > -- > git-series 0.9.1 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: > On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > > Convert sun4i-a10.dtsi to new CCU driver. > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > I finally got around to bisecting a mainline boot failure on > sun4i-a10-cubieboard that's been happening for quite a while. Based > on on kernelci.org, it showed up sometime during the v4.15 merge > window[1]. It bisected down to this commit (in mainline as commit > 41193869f2bdb585ce09bfdd16d9482aadd560ad). > > When it fails, there is no output on the serial console, so I don't > know exactly how it's failing, just that it no longer boots. Yeah, lack of output really looks like something gone wrong in clock setup, though the commit itself has been sitting in tree for a while and the same board has gotten actually bunch of features enabled after my clock patches (drm modesetting + hdmi support). I noticed that you're using GCC 5.3.1. Can you try with newer toolchain? Priit > > Kevin > > [1] https://kernelci.org/boot/id/5a2e10cd59b51430a9afa173/ > > > --- > > arch/arm/boot/dts/sun4i-a10.dtsi | 636 ++++---------------------------- > > 1 file changed, 82 insertions(+), 554 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > > index ba20b48..0d8320a 100644 > > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > > @@ -45,7 +45,8 @@ > > > > #include <dt-bindings/thermal/thermal.h> > > > > -#include <dt-bindings/clock/sun4i-a10-pll2.h> > > +#include <dt-bindings/clock/sunxi-a10-a20-ccu.h> > > +#include <dt-bindings/reset/sunxi-a10-a20-ccu.h> > > #include <dt-bindings/dma/sun4i-a10.h> > > #include <dt-bindings/pinctrl/sun4i-a10.h> > > > > @@ -65,9 +66,9 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_be0-lcd0-hdmi"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > > - <&ahb_gates 44>, <&de_be0_clk>, > > - <&tcon0_ch1_clk>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, > > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -75,10 +76,11 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > > - <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > > + <&ccu CLK_TCON0_CH1>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -86,9 +88,10 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, > > + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, > > + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -96,11 +99,11 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; > > - clocks = <&ahb_gates 34>, <&ahb_gates 36>, > > - <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, > > - <&tcon0_ch1_clk>, <&dram_gates 5>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > }; > > @@ -112,7 +115,7 @@ > > device_type = "cpu"; > > compatible = "arm,cortex-a8"; > > reg = <0x0>; > > - clocks = <&cpu>; > > + clocks = <&ccu CLK_CPU>; > > clock-latency = <244144>; /* 8 32k periods */ > > operating-points = < > > /* kHz uV */ > > @@ -168,18 +171,6 @@ > > #size-cells = <1>; > > ranges; > > > > - /* > > - * This is a dummy clock, to be used as placeholder on > > - * other mux clocks when a specific parent clock is not > > - * yet implemented. It should be dropped when the driver > > - * is complete. > > - */ > > - dummy: dummy { > > - #clock-cells = <0>; > > - compatible = "fixed-clock"; > > - clock-frequency = <0>; > > - }; > > - > > osc24M: clk@01c20050 { > > #clock-cells = <0>; > > compatible = "allwinner,sun4i-a10-osc-clk"; > > @@ -188,487 +179,12 @@ > > clock-output-names = "osc24M"; > > }; > > > > - osc3M: osc3M_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <8>; > > - clock-mult = <1>; > > - clocks = <&osc24M>; > > - clock-output-names = "osc3M"; > > - }; > > - > > osc32k: clk@0 { > > #clock-cells = <0>; > > compatible = "fixed-clock"; > > clock-frequency = <32768>; > > clock-output-names = "osc32k"; > > }; > > - > > - pll1: clk@01c20000 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll1-clk"; > > - reg = <0x01c20000 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll1"; > > - }; > > - > > - pll2: clk@01c20008 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll2-clk"; > > - reg = <0x01c20008 0x8>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll2-1x", "pll2-2x", > > - "pll2-4x", "pll2-8x"; > > - }; > > - > > - pll3: clk@01c20010 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll3-clk"; > > - reg = <0x01c20010 0x4>; > > - clocks = <&osc3M>; > > - clock-output-names = "pll3"; > > - }; > > - > > - pll3x2: pll3x2_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <1>; > > - clock-mult = <2>; > > - clocks = <&pll3>; > > - clock-output-names = "pll3-2x"; > > - }; > > - > > - pll4: clk@01c20018 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll1-clk"; > > - reg = <0x01c20018 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll4"; > > - }; > > - > > - pll5: clk@01c20020 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll5-clk"; > > - reg = <0x01c20020 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll5_ddr", "pll5_other"; > > - }; > > - > > - pll6: clk@01c20028 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll6-clk"; > > - reg = <0x01c20028 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll6_sata", "pll6_other", "pll6"; > > - }; > > - > > - pll7: clk@01c20030 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll3-clk"; > > - reg = <0x01c20030 0x4>; > > - clocks = <&osc3M>; > > - clock-output-names = "pll7"; > > - }; > > - > > - pll7x2: pll7x2_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <1>; > > - clock-mult = <2>; > > - clocks = <&pll7>; > > - clock-output-names = "pll7-2x"; > > - }; > > - > > - /* dummy is 200M */ > > - cpu: cpu@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-cpu-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; > > - clock-output-names = "cpu"; > > - }; > > - > > - axi: axi@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-axi-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&cpu>; > > - clock-output-names = "axi"; > > - }; > > - > > - axi_gates: clk@01c2005c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-axi-gates-clk"; > > - reg = <0x01c2005c 0x4>; > > - clocks = <&axi>; > > - clock-indices = <0>; > > - clock-output-names = "axi_dram"; > > - }; > > - > > - ahb: ahb@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-ahb-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&axi>; > > - clock-output-names = "ahb"; > > - }; > > - > > - ahb_gates: clk@01c20060 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; > > - reg = <0x01c20060 0x8>; > > - clocks = <&ahb>; > > - clock-indices = <0>, <1>, > > - <2>, <3>, > > - <4>, <5>, <6>, > > - <7>, <8>, <9>, > > - <10>, <11>, <12>, > > - <13>, <14>, <16>, > > - <17>, <18>, <20>, > > - <21>, <22>, <23>, > > - <24>, <25>, <26>, > > - <32>, <33>, <34>, > > - <35>, <36>, <37>, > > - <40>, <41>, <43>, > > - <44>, <45>, > > - <46>, <47>, > > - <50>, <52>; > > - clock-output-names = "ahb_usb0", "ahb_ehci0", > > - "ahb_ohci0", "ahb_ehci1", > > - "ahb_ohci1", "ahb_ss", "ahb_dma", > > - "ahb_bist", "ahb_mmc0", "ahb_mmc1", > > - "ahb_mmc2", "ahb_mmc3", "ahb_ms", > > - "ahb_nand", "ahb_sdram", "ahb_ace", > > - "ahb_emac", "ahb_ts", "ahb_spi0", > > - "ahb_spi1", "ahb_spi2", "ahb_spi3", > > - "ahb_pata", "ahb_sata", "ahb_gps", > > - "ahb_ve", "ahb_tvd", "ahb_tve0", > > - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", > > - "ahb_csi0", "ahb_csi1", "ahb_hdmi", > > - "ahb_de_be0", "ahb_de_be1", > > - "ahb_de_fe0", "ahb_de_fe1", > > - "ahb_mp", "ahb_mali400"; > > - }; > > - > > - apb0: apb0@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-apb0-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&ahb>; > > - clock-output-names = "apb0"; > > - }; > > - > > - apb0_gates: clk@01c20068 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; > > - reg = <0x01c20068 0x4>; > > - clocks = <&apb0>; > > - clock-indices = <0>, <1>, > > - <2>, <3>, > > - <5>, <6>, > > - <7>, <10>; > > - clock-output-names = "apb0_codec", "apb0_spdif", > > - "apb0_ac97", "apb0_iis", > > - "apb0_pio", "apb0_ir0", > > - "apb0_ir1", "apb0_keypad"; > > - }; > > - > > - apb1: clk@01c20058 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-apb1-clk"; > > - reg = <0x01c20058 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; > > - clock-output-names = "apb1"; > > - }; > > - > > - apb1_gates: clk@01c2006c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; > > - reg = <0x01c2006c 0x4>; > > - clocks = <&apb1>; > > - clock-indices = <0>, <1>, > > - <2>, <4>, > > - <5>, <6>, > > - <7>, <16>, > > - <17>, <18>, > > - <19>, <20>, > > - <21>, <22>, > > - <23>; > > - clock-output-names = "apb1_i2c0", "apb1_i2c1", > > - "apb1_i2c2", "apb1_can", > > - "apb1_scr", "apb1_ps20", > > - "apb1_ps21", "apb1_uart0", > > - "apb1_uart1", "apb1_uart2", > > - "apb1_uart3", "apb1_uart4", > > - "apb1_uart5", "apb1_uart6", > > - "apb1_uart7"; > > - }; > > - > > - nand_clk: clk@01c20080 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20080 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "nand"; > > - }; > > - > > - ms_clk: clk@01c20084 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20084 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ms"; > > - }; > > - > > - mmc0_clk: clk@01c20088 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20088 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc0", > > - "mmc0_output", > > - "mmc0_sample"; > > - }; > > - > > - mmc1_clk: clk@01c2008c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c2008c 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc1", > > - "mmc1_output", > > - "mmc1_sample"; > > - }; > > - > > - mmc2_clk: clk@01c20090 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20090 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc2", > > - "mmc2_output", > > - "mmc2_sample"; > > - }; > > - > > - mmc3_clk: clk@01c20094 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20094 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc3", > > - "mmc3_output", > > - "mmc3_sample"; > > - }; > > - > > - ts_clk: clk@01c20098 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20098 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ts"; > > - }; > > - > > - ss_clk: clk@01c2009c { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c2009c 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ss"; > > - }; > > - > > - spi0_clk: clk@01c200a0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a0 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi0"; > > - }; > > - > > - spi1_clk: clk@01c200a4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi1"; > > - }; > > - > > - spi2_clk: clk@01c200a8 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a8 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi2"; > > - }; > > - > > - pata_clk: clk@01c200ac { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200ac 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "pata"; > > - }; > > - > > - ir0_clk: clk@01c200b0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200b0 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ir0"; > > - }; > > - > > - ir1_clk: clk@01c200b4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200b4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ir1"; > > - }; > > - > > - spdif_clk: clk@01c200c0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod1-clk"; > > - reg = <0x01c200c0 0x4>; > > - clocks = <&pll2 SUN4I_A10_PLL2_8X>, > > - <&pll2 SUN4I_A10_PLL2_4X>, > > - <&pll2 SUN4I_A10_PLL2_2X>, > > - <&pll2 SUN4I_A10_PLL2_1X>; > > - clock-output-names = "spdif"; > > - }; > > - > > - usb_clk: clk@01c200cc { > > - #clock-cells = <1>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-usb-clk"; > > - reg = <0x01c200cc 0x4>; > > - clocks = <&pll6 1>; > > - clock-output-names = "usb_ohci0", "usb_ohci1", > > - "usb_phy"; > > - }; > > - > > - spi3_clk: clk@01c200d4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200d4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi3"; > > - }; > > - > > - dram_gates: clk@01c20100 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-dram-gates-clk"; > > - reg = <0x01c20100 0x4>; > > - clocks = <&pll5 0>; > > - clock-indices = <0>, > > - <1>, <2>, > > - <3>, > > - <4>, > > - <5>, <6>, > > - <15>, > > - <24>, <25>, > > - <26>, <27>, > > - <28>, <29>; > > - clock-output-names = "dram_ve", > > - "dram_csi0", "dram_csi1", > > - "dram_ts", > > - "dram_tvd", > > - "dram_tve0", "dram_tve1", > > - "dram_output", > > - "dram_de_fe1", "dram_de_fe0", > > - "dram_de_be0", "dram_de_be1", > > - "dram_de_mp", "dram_ace"; > > - }; > > - > > - de_be0_clk: clk@01c20104 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20104 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-be0"; > > - }; > > - > > - de_be1_clk: clk@01c20108 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20108 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-be1"; > > - }; > > - > > - de_fe0_clk: clk@01c2010c { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c2010c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-fe0"; > > - }; > > - > > - de_fe1_clk: clk@01c20110 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20110 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-fe1"; > > - }; > > - > > - > > - tcon0_ch0_clk: clk@01c20118 { > > - #clock-cells = <0>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > > - reg = <0x01c20118 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon0-ch0-sclk"; > > - > > - }; > > - > > - tcon1_ch0_clk: clk@01c2011c { > > - #clock-cells = <0>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > > - reg = <0x01c2011c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon1-ch0-sclk"; > > - > > - }; > > - > > - tcon0_ch1_clk: clk@01c2012c { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > > - reg = <0x01c2012c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon0-ch1-sclk"; > > - > > - }; > > - > > - tcon1_ch1_clk: clk@01c20130 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > > - reg = <0x01c20130 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon1-ch1-sclk"; > > - > > - }; > > - > > - ve_clk: clk@01c2013c { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-ve-clk"; > > - reg = <0x01c2013c 0x4>; > > - clocks = <&pll4>; > > - clock-output-names = "ve"; > > - }; > > - > > - codec_clk: clk@01c20140 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-codec-clk"; > > - reg = <0x01c20140 0x4>; > > - clocks = <&pll2 SUN4I_A10_PLL2_1X>; > > - clock-output-names = "codec"; > > - }; > > }; > > > > soc@01c00000 { > > @@ -717,7 +233,7 @@ > > compatible = "allwinner,sun4i-a10-dma"; > > reg = <0x01c02000 0x1000>; > > interrupts = <27>; > > - clocks = <&ahb_gates 6>; > > + clocks = <&ccu CLK_AHB_DMA>; > > #dma-cells = <2>; > > }; > > > > @@ -725,7 +241,7 @@ > > compatible = "allwinner,sun4i-a10-nand"; > > reg = <0x01c03000 0x1000>; > > interrupts = <37>; > > - clocks = <&ahb_gates 13>, <&nand_clk>; > > + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 3>; > > dma-names = "rxtx"; > > @@ -738,7 +254,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c05000 0x1000>; > > interrupts = <10>; > > - clocks = <&ahb_gates 20>, <&spi0_clk>; > > + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 27>, > > <&dma SUN4I_DMA_DEDICATED 26>; > > @@ -752,7 +268,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c06000 0x1000>; > > interrupts = <11>; > > - clocks = <&ahb_gates 21>, <&spi1_clk>; > > + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 9>, > > <&dma SUN4I_DMA_DEDICATED 8>; > > @@ -766,7 +282,7 @@ > > compatible = "allwinner,sun4i-a10-emac"; > > reg = <0x01c0b000 0x1000>; > > interrupts = <55>; > > - clocks = <&ahb_gates 17>; > > + clocks = <&ccu CLK_AHB_EMAC>; > > allwinner,sram = <&emac_sram 1>; > > status = "disabled"; > > }; > > @@ -782,10 +298,10 @@ > > mmc0: mmc@01c0f000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c0f000 0x1000>; > > - clocks = <&ahb_gates 8>, > > - <&mmc0_clk 0>, > > - <&mmc0_clk 1>, > > - <&mmc0_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC0>, > > + <&ccu CLK_MMC0>, > > + <&ccu CLK_MMC0_OUTPUT>, > > + <&ccu CLK_MMC0_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -799,10 +315,10 @@ > > mmc1: mmc@01c10000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c10000 0x1000>; > > - clocks = <&ahb_gates 9>, > > - <&mmc1_clk 0>, > > - <&mmc1_clk 1>, > > - <&mmc1_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC1>, > > + <&ccu CLK_MMC1>, > > + <&ccu CLK_MMC1_OUTPUT>, > > + <&ccu CLK_MMC1_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -816,10 +332,10 @@ > > mmc2: mmc@01c11000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c11000 0x1000>; > > - clocks = <&ahb_gates 10>, > > - <&mmc2_clk 0>, > > - <&mmc2_clk 1>, > > - <&mmc2_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC2>, > > + <&ccu CLK_MMC2>, > > + <&ccu CLK_MMC2_OUTPUT>, > > + <&ccu CLK_MMC2_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -833,10 +349,10 @@ > > mmc3: mmc@01c12000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c12000 0x1000>; > > - clocks = <&ahb_gates 11>, > > - <&mmc3_clk 0>, > > - <&mmc3_clk 1>, > > - <&mmc3_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC3>, > > + <&ccu CLK_MMC3>, > > + <&ccu CLK_MMC3_OUTPUT>, > > + <&ccu CLK_MMC3_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -850,7 +366,7 @@ > > usb_otg: usb@01c13000 { > > compatible = "allwinner,sun4i-a10-musb"; > > reg = <0x01c13000 0x0400>; > > - clocks = <&ahb_gates 0>; > > + clocks = <&ccu CLK_AHB_OTG>; > > interrupts = <38>; > > interrupt-names = "mc"; > > phys = <&usbphy 0>; > > @@ -865,9 +381,11 @@ > > compatible = "allwinner,sun4i-a10-usb-phy"; > > reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; > > reg-names = "phy_ctrl", "pmu1", "pmu2"; > > - clocks = <&usb_clk 8>; > > + clocks = <&ccu CLK_USB_PHY>; > > clock-names = "usb_phy"; > > - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; > > + resets = <&ccu RST_USB_PHY0>, > > + <&ccu RST_USB_PHY1>, > > + <&ccu RST_USB_PHY2>; > > reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; > > status = "disabled"; > > }; > > @@ -876,7 +394,7 @@ > > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > > reg = <0x01c14000 0x100>; > > interrupts = <39>; > > - clocks = <&ahb_gates 1>; > > + clocks = <&ccu CLK_AHB_EHCI0>; > > phys = <&usbphy 1>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -886,7 +404,7 @@ > > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > > reg = <0x01c14400 0x100>; > > interrupts = <64>; > > - clocks = <&usb_clk 6>, <&ahb_gates 2>; > > + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; > > phys = <&usbphy 1>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -896,7 +414,7 @@ > > compatible = "allwinner,sun4i-a10-crypto"; > > reg = <0x01c15000 0x1000>; > > interrupts = <86>; > > - clocks = <&ahb_gates 5>, <&ss_clk>; > > + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; > > clock-names = "ahb", "mod"; > > }; > > > > @@ -904,7 +422,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c17000 0x1000>; > > interrupts = <12>; > > - clocks = <&ahb_gates 22>, <&spi2_clk>; > > + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 29>, > > <&dma SUN4I_DMA_DEDICATED 28>; > > @@ -918,7 +436,8 @@ > > compatible = "allwinner,sun4i-a10-ahci"; > > reg = <0x01c18000 0x1000>; > > interrupts = <56>; > > - clocks = <&pll6 0>, <&ahb_gates 25>; > > + clocks = <&ccu CLK_PLL_PERIPH_SATA>, > > + <&ccu CLK_AHB_SATA>; > > status = "disabled"; > > }; > > > > @@ -926,7 +445,7 @@ > > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > > reg = <0x01c1c000 0x100>; > > interrupts = <40>; > > - clocks = <&ahb_gates 3>; > > + clocks = <&ccu CLK_AHB_EHCI1>; > > phys = <&usbphy 2>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -936,7 +455,7 @@ > > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > > reg = <0x01c1c400 0x100>; > > interrupts = <65>; > > - clocks = <&usb_clk 7>, <&ahb_gates 4>; > > + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; > > phys = <&usbphy 2>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -946,7 +465,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c1f000 0x1000>; > > interrupts = <50>; > > - clocks = <&ahb_gates 23>, <&spi3_clk>; > > + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 31>, > > <&dma SUN4I_DMA_DEDICATED 30>; > > @@ -956,6 +475,15 @@ > > #size-cells = <0>; > > }; > > > > + ccu: clock@01c20000 { > > + compatible = "allwinner,sun4i-a10-ccu"; > > + reg = <0x01c20000 0x400>; > > + clocks = <&osc24M>, <&osc32k>; > > + clock-names = "hosc", "losc"; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + }; > > + > > intc: interrupt-controller@01c20400 { > > compatible = "allwinner,sun4i-a10-ic"; > > reg = <0x01c20400 0x400>; > > @@ -967,7 +495,7 @@ > > compatible = "allwinner,sun4i-a10-pinctrl"; > > reg = <0x01c20800 0x400>; > > interrupts = <28>; > > - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; > > + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; > > clock-names = "apb", "hosc", "losc"; > > gpio-controller; > > interrupt-controller; > > @@ -1145,7 +673,7 @@ > > compatible = "allwinner,sun4i-a10-spdif"; > > reg = <0x01c21000 0x400>; > > interrupts = <13>; > > - clocks = <&apb0_gates 1>, <&spdif_clk>; > > + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; > > clock-names = "apb", "spdif"; > > dmas = <&dma SUN4I_DMA_NORMAL 2>, > > <&dma SUN4I_DMA_NORMAL 2>; > > @@ -1155,7 +683,7 @@ > > > > ir0: ir@01c21800 { > > compatible = "allwinner,sun4i-a10-ir"; > > - clocks = <&apb0_gates 6>, <&ir0_clk>; > > + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; > > clock-names = "apb", "ir"; > > interrupts = <5>; > > reg = <0x01c21800 0x40>; > > @@ -1164,7 +692,7 @@ > > > > ir1: ir@01c21c00 { > > compatible = "allwinner,sun4i-a10-ir"; > > - clocks = <&apb0_gates 7>, <&ir1_clk>; > > + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; > > clock-names = "apb", "ir"; > > interrupts = <6>; > > reg = <0x01c21c00 0x40>; > > @@ -1183,7 +711,7 @@ > > compatible = "allwinner,sun4i-a10-codec"; > > reg = <0x01c22c00 0x40>; > > interrupts = <30>; > > - clocks = <&apb0_gates 0>, <&codec_clk>; > > + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; > > clock-names = "apb", "codec"; > > dmas = <&dma SUN4I_DMA_NORMAL 19>, > > <&dma SUN4I_DMA_NORMAL 19>; > > @@ -1209,7 +737,7 @@ > > interrupts = <1>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 16>; > > + clocks = <&ccu CLK_APB1_UART0>; > > status = "disabled"; > > }; > > > > @@ -1219,7 +747,7 @@ > > interrupts = <2>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 17>; > > + clocks = <&ccu CLK_APB1_UART1>; > > status = "disabled"; > > }; > > > > @@ -1229,7 +757,7 @@ > > interrupts = <3>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 18>; > > + clocks = <&ccu CLK_APB1_UART2>; > > status = "disabled"; > > }; > > > > @@ -1239,7 +767,7 @@ > > interrupts = <4>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 19>; > > + clocks = <&ccu CLK_APB1_UART3>; > > status = "disabled"; > > }; > > > > @@ -1249,7 +777,7 @@ > > interrupts = <17>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 20>; > > + clocks = <&ccu CLK_APB1_UART4>; > > status = "disabled"; > > }; > > > > @@ -1259,7 +787,7 @@ > > interrupts = <18>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 21>; > > + clocks = <&ccu CLK_APB1_UART5>; > > status = "disabled"; > > }; > > > > @@ -1269,7 +797,7 @@ > > interrupts = <19>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 22>; > > + clocks = <&ccu CLK_APB1_UART6>; > > status = "disabled"; > > }; > > > > @@ -1279,7 +807,7 @@ > > interrupts = <20>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 23>; > > + clocks = <&ccu CLK_APB1_UART7>; > > status = "disabled"; > > }; > > > > @@ -1287,7 +815,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2ac00 0x400>; > > interrupts = <7>; > > - clocks = <&apb1_gates 0>; > > + clocks = <&ccu CLK_APB1_I2C0>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1297,7 +825,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2b000 0x400>; > > interrupts = <8>; > > - clocks = <&apb1_gates 1>; > > + clocks = <&ccu CLK_APB1_I2C1>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1307,7 +835,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2b400 0x400>; > > interrupts = <9>; > > - clocks = <&apb1_gates 2>; > > + clocks = <&ccu CLK_APB1_I2C2>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1317,7 +845,7 @@ > > compatible = "allwinner,sun4i-a10-ps2"; > > reg = <0x01c2a000 0x400>; > > interrupts = <62>; > > - clocks = <&apb1_gates 6>; > > + clocks = <&ccu CLK_APB1_PS20>; > > status = "disabled"; > > }; > > > > @@ -1325,7 +853,7 @@ > > compatible = "allwinner,sun4i-a10-ps2"; > > reg = <0x01c2a400 0x400>; > > interrupts = <63>; > > - clocks = <&apb1_gates 7>; > > + clocks = <&ccu CLK_APB1_PS21>; > > status = "disabled"; > > }; > > }; > > -- > > git-series 0.9.1 > > > > -- > > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: > On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > > Convert sun4i-a10.dtsi to new CCU driver. > > > > Signed-off-by: Priit Laes <plaes@plaes.org> > > I finally got around to bisecting a mainline boot failure on > sun4i-a10-cubieboard that's been happening for quite a while. Based > on on kernelci.org, it showed up sometime during the v4.15 merge > window[1]. It bisected down to this commit (in mainline as commit > 41193869f2bdb585ce09bfdd16d9482aadd560ad). > > When it fails, there is no output on the serial console, so I don't > know exactly how it's failing, just that it no longer boots. We tried out latest 4.15 with various compilers and it works: - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet - gcc 7.2.0-debian - A10 Cubieboard > > Kevin > > [1] https://kernelci.org/boot/id/5a2e10cd59b51430a9afa173/ > > > --- > > arch/arm/boot/dts/sun4i-a10.dtsi | 636 ++++---------------------------- > > 1 file changed, 82 insertions(+), 554 deletions(-) > > > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > > index ba20b48..0d8320a 100644 > > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > > @@ -45,7 +45,8 @@ > > > > #include <dt-bindings/thermal/thermal.h> > > > > -#include <dt-bindings/clock/sun4i-a10-pll2.h> > > +#include <dt-bindings/clock/sunxi-a10-a20-ccu.h> > > +#include <dt-bindings/reset/sunxi-a10-a20-ccu.h> > > #include <dt-bindings/dma/sun4i-a10.h> > > #include <dt-bindings/pinctrl/sun4i-a10.h> > > > > @@ -65,9 +66,9 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_be0-lcd0-hdmi"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > > - <&ahb_gates 44>, <&de_be0_clk>, > > - <&tcon0_ch1_clk>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, > > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -75,10 +76,11 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 43>, > > - <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > > + <&ccu CLK_TCON0_CH1>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -86,9 +88,10 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0"; > > - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, > > + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, > > + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > > > @@ -96,11 +99,11 @@ > > compatible = "allwinner,simple-framebuffer", > > "simple-framebuffer"; > > allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; > > - clocks = <&ahb_gates 34>, <&ahb_gates 36>, > > - <&ahb_gates 44>, <&ahb_gates 46>, > > - <&de_be0_clk>, <&de_fe0_clk>, > > - <&tcon0_ch1_clk>, <&dram_gates 5>, > > - <&dram_gates 25>, <&dram_gates 26>; > > + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, > > + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, > > + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, > > + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, > > + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; > > status = "disabled"; > > }; > > }; > > @@ -112,7 +115,7 @@ > > device_type = "cpu"; > > compatible = "arm,cortex-a8"; > > reg = <0x0>; > > - clocks = <&cpu>; > > + clocks = <&ccu CLK_CPU>; > > clock-latency = <244144>; /* 8 32k periods */ > > operating-points = < > > /* kHz uV */ > > @@ -168,18 +171,6 @@ > > #size-cells = <1>; > > ranges; > > > > - /* > > - * This is a dummy clock, to be used as placeholder on > > - * other mux clocks when a specific parent clock is not > > - * yet implemented. It should be dropped when the driver > > - * is complete. > > - */ > > - dummy: dummy { > > - #clock-cells = <0>; > > - compatible = "fixed-clock"; > > - clock-frequency = <0>; > > - }; > > - > > osc24M: clk@01c20050 { > > #clock-cells = <0>; > > compatible = "allwinner,sun4i-a10-osc-clk"; > > @@ -188,487 +179,12 @@ > > clock-output-names = "osc24M"; > > }; > > > > - osc3M: osc3M_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <8>; > > - clock-mult = <1>; > > - clocks = <&osc24M>; > > - clock-output-names = "osc3M"; > > - }; > > - > > osc32k: clk@0 { > > #clock-cells = <0>; > > compatible = "fixed-clock"; > > clock-frequency = <32768>; > > clock-output-names = "osc32k"; > > }; > > - > > - pll1: clk@01c20000 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll1-clk"; > > - reg = <0x01c20000 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll1"; > > - }; > > - > > - pll2: clk@01c20008 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll2-clk"; > > - reg = <0x01c20008 0x8>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll2-1x", "pll2-2x", > > - "pll2-4x", "pll2-8x"; > > - }; > > - > > - pll3: clk@01c20010 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll3-clk"; > > - reg = <0x01c20010 0x4>; > > - clocks = <&osc3M>; > > - clock-output-names = "pll3"; > > - }; > > - > > - pll3x2: pll3x2_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <1>; > > - clock-mult = <2>; > > - clocks = <&pll3>; > > - clock-output-names = "pll3-2x"; > > - }; > > - > > - pll4: clk@01c20018 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll1-clk"; > > - reg = <0x01c20018 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll4"; > > - }; > > - > > - pll5: clk@01c20020 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll5-clk"; > > - reg = <0x01c20020 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll5_ddr", "pll5_other"; > > - }; > > - > > - pll6: clk@01c20028 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-pll6-clk"; > > - reg = <0x01c20028 0x4>; > > - clocks = <&osc24M>; > > - clock-output-names = "pll6_sata", "pll6_other", "pll6"; > > - }; > > - > > - pll7: clk@01c20030 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-pll3-clk"; > > - reg = <0x01c20030 0x4>; > > - clocks = <&osc3M>; > > - clock-output-names = "pll7"; > > - }; > > - > > - pll7x2: pll7x2_clk { > > - compatible = "fixed-factor-clock"; > > - #clock-cells = <0>; > > - clock-div = <1>; > > - clock-mult = <2>; > > - clocks = <&pll7>; > > - clock-output-names = "pll7-2x"; > > - }; > > - > > - /* dummy is 200M */ > > - cpu: cpu@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-cpu-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; > > - clock-output-names = "cpu"; > > - }; > > - > > - axi: axi@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-axi-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&cpu>; > > - clock-output-names = "axi"; > > - }; > > - > > - axi_gates: clk@01c2005c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-axi-gates-clk"; > > - reg = <0x01c2005c 0x4>; > > - clocks = <&axi>; > > - clock-indices = <0>; > > - clock-output-names = "axi_dram"; > > - }; > > - > > - ahb: ahb@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-ahb-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&axi>; > > - clock-output-names = "ahb"; > > - }; > > - > > - ahb_gates: clk@01c20060 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; > > - reg = <0x01c20060 0x8>; > > - clocks = <&ahb>; > > - clock-indices = <0>, <1>, > > - <2>, <3>, > > - <4>, <5>, <6>, > > - <7>, <8>, <9>, > > - <10>, <11>, <12>, > > - <13>, <14>, <16>, > > - <17>, <18>, <20>, > > - <21>, <22>, <23>, > > - <24>, <25>, <26>, > > - <32>, <33>, <34>, > > - <35>, <36>, <37>, > > - <40>, <41>, <43>, > > - <44>, <45>, > > - <46>, <47>, > > - <50>, <52>; > > - clock-output-names = "ahb_usb0", "ahb_ehci0", > > - "ahb_ohci0", "ahb_ehci1", > > - "ahb_ohci1", "ahb_ss", "ahb_dma", > > - "ahb_bist", "ahb_mmc0", "ahb_mmc1", > > - "ahb_mmc2", "ahb_mmc3", "ahb_ms", > > - "ahb_nand", "ahb_sdram", "ahb_ace", > > - "ahb_emac", "ahb_ts", "ahb_spi0", > > - "ahb_spi1", "ahb_spi2", "ahb_spi3", > > - "ahb_pata", "ahb_sata", "ahb_gps", > > - "ahb_ve", "ahb_tvd", "ahb_tve0", > > - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", > > - "ahb_csi0", "ahb_csi1", "ahb_hdmi", > > - "ahb_de_be0", "ahb_de_be1", > > - "ahb_de_fe0", "ahb_de_fe1", > > - "ahb_mp", "ahb_mali400"; > > - }; > > - > > - apb0: apb0@01c20054 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-apb0-clk"; > > - reg = <0x01c20054 0x4>; > > - clocks = <&ahb>; > > - clock-output-names = "apb0"; > > - }; > > - > > - apb0_gates: clk@01c20068 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; > > - reg = <0x01c20068 0x4>; > > - clocks = <&apb0>; > > - clock-indices = <0>, <1>, > > - <2>, <3>, > > - <5>, <6>, > > - <7>, <10>; > > - clock-output-names = "apb0_codec", "apb0_spdif", > > - "apb0_ac97", "apb0_iis", > > - "apb0_pio", "apb0_ir0", > > - "apb0_ir1", "apb0_keypad"; > > - }; > > - > > - apb1: clk@01c20058 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-apb1-clk"; > > - reg = <0x01c20058 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; > > - clock-output-names = "apb1"; > > - }; > > - > > - apb1_gates: clk@01c2006c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; > > - reg = <0x01c2006c 0x4>; > > - clocks = <&apb1>; > > - clock-indices = <0>, <1>, > > - <2>, <4>, > > - <5>, <6>, > > - <7>, <16>, > > - <17>, <18>, > > - <19>, <20>, > > - <21>, <22>, > > - <23>; > > - clock-output-names = "apb1_i2c0", "apb1_i2c1", > > - "apb1_i2c2", "apb1_can", > > - "apb1_scr", "apb1_ps20", > > - "apb1_ps21", "apb1_uart0", > > - "apb1_uart1", "apb1_uart2", > > - "apb1_uart3", "apb1_uart4", > > - "apb1_uart5", "apb1_uart6", > > - "apb1_uart7"; > > - }; > > - > > - nand_clk: clk@01c20080 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20080 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "nand"; > > - }; > > - > > - ms_clk: clk@01c20084 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20084 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ms"; > > - }; > > - > > - mmc0_clk: clk@01c20088 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20088 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc0", > > - "mmc0_output", > > - "mmc0_sample"; > > - }; > > - > > - mmc1_clk: clk@01c2008c { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c2008c 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc1", > > - "mmc1_output", > > - "mmc1_sample"; > > - }; > > - > > - mmc2_clk: clk@01c20090 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20090 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc2", > > - "mmc2_output", > > - "mmc2_sample"; > > - }; > > - > > - mmc3_clk: clk@01c20094 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-mmc-clk"; > > - reg = <0x01c20094 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "mmc3", > > - "mmc3_output", > > - "mmc3_sample"; > > - }; > > - > > - ts_clk: clk@01c20098 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c20098 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ts"; > > - }; > > - > > - ss_clk: clk@01c2009c { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c2009c 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ss"; > > - }; > > - > > - spi0_clk: clk@01c200a0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a0 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi0"; > > - }; > > - > > - spi1_clk: clk@01c200a4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi1"; > > - }; > > - > > - spi2_clk: clk@01c200a8 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200a8 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi2"; > > - }; > > - > > - pata_clk: clk@01c200ac { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200ac 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "pata"; > > - }; > > - > > - ir0_clk: clk@01c200b0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200b0 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ir0"; > > - }; > > - > > - ir1_clk: clk@01c200b4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200b4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "ir1"; > > - }; > > - > > - spdif_clk: clk@01c200c0 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod1-clk"; > > - reg = <0x01c200c0 0x4>; > > - clocks = <&pll2 SUN4I_A10_PLL2_8X>, > > - <&pll2 SUN4I_A10_PLL2_4X>, > > - <&pll2 SUN4I_A10_PLL2_2X>, > > - <&pll2 SUN4I_A10_PLL2_1X>; > > - clock-output-names = "spdif"; > > - }; > > - > > - usb_clk: clk@01c200cc { > > - #clock-cells = <1>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-usb-clk"; > > - reg = <0x01c200cc 0x4>; > > - clocks = <&pll6 1>; > > - clock-output-names = "usb_ohci0", "usb_ohci1", > > - "usb_phy"; > > - }; > > - > > - spi3_clk: clk@01c200d4 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-mod0-clk"; > > - reg = <0x01c200d4 0x4>; > > - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; > > - clock-output-names = "spi3"; > > - }; > > - > > - dram_gates: clk@01c20100 { > > - #clock-cells = <1>; > > - compatible = "allwinner,sun4i-a10-dram-gates-clk"; > > - reg = <0x01c20100 0x4>; > > - clocks = <&pll5 0>; > > - clock-indices = <0>, > > - <1>, <2>, > > - <3>, > > - <4>, > > - <5>, <6>, > > - <15>, > > - <24>, <25>, > > - <26>, <27>, > > - <28>, <29>; > > - clock-output-names = "dram_ve", > > - "dram_csi0", "dram_csi1", > > - "dram_ts", > > - "dram_tvd", > > - "dram_tve0", "dram_tve1", > > - "dram_output", > > - "dram_de_fe1", "dram_de_fe0", > > - "dram_de_be0", "dram_de_be1", > > - "dram_de_mp", "dram_ace"; > > - }; > > - > > - de_be0_clk: clk@01c20104 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20104 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-be0"; > > - }; > > - > > - de_be1_clk: clk@01c20108 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20108 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-be1"; > > - }; > > - > > - de_fe0_clk: clk@01c2010c { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c2010c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-fe0"; > > - }; > > - > > - de_fe1_clk: clk@01c20110 { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-display-clk"; > > - reg = <0x01c20110 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll5 1>; > > - clock-output-names = "de-fe1"; > > - }; > > - > > - > > - tcon0_ch0_clk: clk@01c20118 { > > - #clock-cells = <0>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > > - reg = <0x01c20118 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon0-ch0-sclk"; > > - > > - }; > > - > > - tcon1_ch0_clk: clk@01c2011c { > > - #clock-cells = <0>; > > - #reset-cells = <1>; > > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > > - reg = <0x01c2011c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon1-ch0-sclk"; > > - > > - }; > > - > > - tcon0_ch1_clk: clk@01c2012c { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; > > - reg = <0x01c2012c 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon0-ch1-sclk"; > > - > > - }; > > - > > - tcon1_ch1_clk: clk@01c20130 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; > > - reg = <0x01c20130 0x4>; > > - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; > > - clock-output-names = "tcon1-ch1-sclk"; > > - > > - }; > > - > > - ve_clk: clk@01c2013c { > > - #clock-cells = <0>; > > - #reset-cells = <0>; > > - compatible = "allwinner,sun4i-a10-ve-clk"; > > - reg = <0x01c2013c 0x4>; > > - clocks = <&pll4>; > > - clock-output-names = "ve"; > > - }; > > - > > - codec_clk: clk@01c20140 { > > - #clock-cells = <0>; > > - compatible = "allwinner,sun4i-a10-codec-clk"; > > - reg = <0x01c20140 0x4>; > > - clocks = <&pll2 SUN4I_A10_PLL2_1X>; > > - clock-output-names = "codec"; > > - }; > > }; > > > > soc@01c00000 { > > @@ -717,7 +233,7 @@ > > compatible = "allwinner,sun4i-a10-dma"; > > reg = <0x01c02000 0x1000>; > > interrupts = <27>; > > - clocks = <&ahb_gates 6>; > > + clocks = <&ccu CLK_AHB_DMA>; > > #dma-cells = <2>; > > }; > > > > @@ -725,7 +241,7 @@ > > compatible = "allwinner,sun4i-a10-nand"; > > reg = <0x01c03000 0x1000>; > > interrupts = <37>; > > - clocks = <&ahb_gates 13>, <&nand_clk>; > > + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 3>; > > dma-names = "rxtx"; > > @@ -738,7 +254,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c05000 0x1000>; > > interrupts = <10>; > > - clocks = <&ahb_gates 20>, <&spi0_clk>; > > + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 27>, > > <&dma SUN4I_DMA_DEDICATED 26>; > > @@ -752,7 +268,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c06000 0x1000>; > > interrupts = <11>; > > - clocks = <&ahb_gates 21>, <&spi1_clk>; > > + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 9>, > > <&dma SUN4I_DMA_DEDICATED 8>; > > @@ -766,7 +282,7 @@ > > compatible = "allwinner,sun4i-a10-emac"; > > reg = <0x01c0b000 0x1000>; > > interrupts = <55>; > > - clocks = <&ahb_gates 17>; > > + clocks = <&ccu CLK_AHB_EMAC>; > > allwinner,sram = <&emac_sram 1>; > > status = "disabled"; > > }; > > @@ -782,10 +298,10 @@ > > mmc0: mmc@01c0f000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c0f000 0x1000>; > > - clocks = <&ahb_gates 8>, > > - <&mmc0_clk 0>, > > - <&mmc0_clk 1>, > > - <&mmc0_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC0>, > > + <&ccu CLK_MMC0>, > > + <&ccu CLK_MMC0_OUTPUT>, > > + <&ccu CLK_MMC0_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -799,10 +315,10 @@ > > mmc1: mmc@01c10000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c10000 0x1000>; > > - clocks = <&ahb_gates 9>, > > - <&mmc1_clk 0>, > > - <&mmc1_clk 1>, > > - <&mmc1_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC1>, > > + <&ccu CLK_MMC1>, > > + <&ccu CLK_MMC1_OUTPUT>, > > + <&ccu CLK_MMC1_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -816,10 +332,10 @@ > > mmc2: mmc@01c11000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c11000 0x1000>; > > - clocks = <&ahb_gates 10>, > > - <&mmc2_clk 0>, > > - <&mmc2_clk 1>, > > - <&mmc2_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC2>, > > + <&ccu CLK_MMC2>, > > + <&ccu CLK_MMC2_OUTPUT>, > > + <&ccu CLK_MMC2_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -833,10 +349,10 @@ > > mmc3: mmc@01c12000 { > > compatible = "allwinner,sun4i-a10-mmc"; > > reg = <0x01c12000 0x1000>; > > - clocks = <&ahb_gates 11>, > > - <&mmc3_clk 0>, > > - <&mmc3_clk 1>, > > - <&mmc3_clk 2>; > > + clocks = <&ccu CLK_AHB_MMC3>, > > + <&ccu CLK_MMC3>, > > + <&ccu CLK_MMC3_OUTPUT>, > > + <&ccu CLK_MMC3_SAMPLE>; > > clock-names = "ahb", > > "mmc", > > "output", > > @@ -850,7 +366,7 @@ > > usb_otg: usb@01c13000 { > > compatible = "allwinner,sun4i-a10-musb"; > > reg = <0x01c13000 0x0400>; > > - clocks = <&ahb_gates 0>; > > + clocks = <&ccu CLK_AHB_OTG>; > > interrupts = <38>; > > interrupt-names = "mc"; > > phys = <&usbphy 0>; > > @@ -865,9 +381,11 @@ > > compatible = "allwinner,sun4i-a10-usb-phy"; > > reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; > > reg-names = "phy_ctrl", "pmu1", "pmu2"; > > - clocks = <&usb_clk 8>; > > + clocks = <&ccu CLK_USB_PHY>; > > clock-names = "usb_phy"; > > - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; > > + resets = <&ccu RST_USB_PHY0>, > > + <&ccu RST_USB_PHY1>, > > + <&ccu RST_USB_PHY2>; > > reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; > > status = "disabled"; > > }; > > @@ -876,7 +394,7 @@ > > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > > reg = <0x01c14000 0x100>; > > interrupts = <39>; > > - clocks = <&ahb_gates 1>; > > + clocks = <&ccu CLK_AHB_EHCI0>; > > phys = <&usbphy 1>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -886,7 +404,7 @@ > > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > > reg = <0x01c14400 0x100>; > > interrupts = <64>; > > - clocks = <&usb_clk 6>, <&ahb_gates 2>; > > + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; > > phys = <&usbphy 1>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -896,7 +414,7 @@ > > compatible = "allwinner,sun4i-a10-crypto"; > > reg = <0x01c15000 0x1000>; > > interrupts = <86>; > > - clocks = <&ahb_gates 5>, <&ss_clk>; > > + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; > > clock-names = "ahb", "mod"; > > }; > > > > @@ -904,7 +422,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c17000 0x1000>; > > interrupts = <12>; > > - clocks = <&ahb_gates 22>, <&spi2_clk>; > > + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 29>, > > <&dma SUN4I_DMA_DEDICATED 28>; > > @@ -918,7 +436,8 @@ > > compatible = "allwinner,sun4i-a10-ahci"; > > reg = <0x01c18000 0x1000>; > > interrupts = <56>; > > - clocks = <&pll6 0>, <&ahb_gates 25>; > > + clocks = <&ccu CLK_PLL_PERIPH_SATA>, > > + <&ccu CLK_AHB_SATA>; > > status = "disabled"; > > }; > > > > @@ -926,7 +445,7 @@ > > compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; > > reg = <0x01c1c000 0x100>; > > interrupts = <40>; > > - clocks = <&ahb_gates 3>; > > + clocks = <&ccu CLK_AHB_EHCI1>; > > phys = <&usbphy 2>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -936,7 +455,7 @@ > > compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; > > reg = <0x01c1c400 0x100>; > > interrupts = <65>; > > - clocks = <&usb_clk 7>, <&ahb_gates 4>; > > + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; > > phys = <&usbphy 2>; > > phy-names = "usb"; > > status = "disabled"; > > @@ -946,7 +465,7 @@ > > compatible = "allwinner,sun4i-a10-spi"; > > reg = <0x01c1f000 0x1000>; > > interrupts = <50>; > > - clocks = <&ahb_gates 23>, <&spi3_clk>; > > + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; > > clock-names = "ahb", "mod"; > > dmas = <&dma SUN4I_DMA_DEDICATED 31>, > > <&dma SUN4I_DMA_DEDICATED 30>; > > @@ -956,6 +475,15 @@ > > #size-cells = <0>; > > }; > > > > + ccu: clock@01c20000 { > > + compatible = "allwinner,sun4i-a10-ccu"; > > + reg = <0x01c20000 0x400>; > > + clocks = <&osc24M>, <&osc32k>; > > + clock-names = "hosc", "losc"; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + }; > > + > > intc: interrupt-controller@01c20400 { > > compatible = "allwinner,sun4i-a10-ic"; > > reg = <0x01c20400 0x400>; > > @@ -967,7 +495,7 @@ > > compatible = "allwinner,sun4i-a10-pinctrl"; > > reg = <0x01c20800 0x400>; > > interrupts = <28>; > > - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; > > + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; > > clock-names = "apb", "hosc", "losc"; > > gpio-controller; > > interrupt-controller; > > @@ -1145,7 +673,7 @@ > > compatible = "allwinner,sun4i-a10-spdif"; > > reg = <0x01c21000 0x400>; > > interrupts = <13>; > > - clocks = <&apb0_gates 1>, <&spdif_clk>; > > + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; > > clock-names = "apb", "spdif"; > > dmas = <&dma SUN4I_DMA_NORMAL 2>, > > <&dma SUN4I_DMA_NORMAL 2>; > > @@ -1155,7 +683,7 @@ > > > > ir0: ir@01c21800 { > > compatible = "allwinner,sun4i-a10-ir"; > > - clocks = <&apb0_gates 6>, <&ir0_clk>; > > + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; > > clock-names = "apb", "ir"; > > interrupts = <5>; > > reg = <0x01c21800 0x40>; > > @@ -1164,7 +692,7 @@ > > > > ir1: ir@01c21c00 { > > compatible = "allwinner,sun4i-a10-ir"; > > - clocks = <&apb0_gates 7>, <&ir1_clk>; > > + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; > > clock-names = "apb", "ir"; > > interrupts = <6>; > > reg = <0x01c21c00 0x40>; > > @@ -1183,7 +711,7 @@ > > compatible = "allwinner,sun4i-a10-codec"; > > reg = <0x01c22c00 0x40>; > > interrupts = <30>; > > - clocks = <&apb0_gates 0>, <&codec_clk>; > > + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; > > clock-names = "apb", "codec"; > > dmas = <&dma SUN4I_DMA_NORMAL 19>, > > <&dma SUN4I_DMA_NORMAL 19>; > > @@ -1209,7 +737,7 @@ > > interrupts = <1>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 16>; > > + clocks = <&ccu CLK_APB1_UART0>; > > status = "disabled"; > > }; > > > > @@ -1219,7 +747,7 @@ > > interrupts = <2>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 17>; > > + clocks = <&ccu CLK_APB1_UART1>; > > status = "disabled"; > > }; > > > > @@ -1229,7 +757,7 @@ > > interrupts = <3>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 18>; > > + clocks = <&ccu CLK_APB1_UART2>; > > status = "disabled"; > > }; > > > > @@ -1239,7 +767,7 @@ > > interrupts = <4>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 19>; > > + clocks = <&ccu CLK_APB1_UART3>; > > status = "disabled"; > > }; > > > > @@ -1249,7 +777,7 @@ > > interrupts = <17>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 20>; > > + clocks = <&ccu CLK_APB1_UART4>; > > status = "disabled"; > > }; > > > > @@ -1259,7 +787,7 @@ > > interrupts = <18>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 21>; > > + clocks = <&ccu CLK_APB1_UART5>; > > status = "disabled"; > > }; > > > > @@ -1269,7 +797,7 @@ > > interrupts = <19>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 22>; > > + clocks = <&ccu CLK_APB1_UART6>; > > status = "disabled"; > > }; > > > > @@ -1279,7 +807,7 @@ > > interrupts = <20>; > > reg-shift = <2>; > > reg-io-width = <4>; > > - clocks = <&apb1_gates 23>; > > + clocks = <&ccu CLK_APB1_UART7>; > > status = "disabled"; > > }; > > > > @@ -1287,7 +815,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2ac00 0x400>; > > interrupts = <7>; > > - clocks = <&apb1_gates 0>; > > + clocks = <&ccu CLK_APB1_I2C0>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1297,7 +825,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2b000 0x400>; > > interrupts = <8>; > > - clocks = <&apb1_gates 1>; > > + clocks = <&ccu CLK_APB1_I2C1>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1307,7 +835,7 @@ > > compatible = "allwinner,sun4i-a10-i2c"; > > reg = <0x01c2b400 0x400>; > > interrupts = <9>; > > - clocks = <&apb1_gates 2>; > > + clocks = <&ccu CLK_APB1_I2C2>; > > status = "disabled"; > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -1317,7 +845,7 @@ > > compatible = "allwinner,sun4i-a10-ps2"; > > reg = <0x01c2a000 0x400>; > > interrupts = <62>; > > - clocks = <&apb1_gates 6>; > > + clocks = <&ccu CLK_APB1_PS20>; > > status = "disabled"; > > }; > > > > @@ -1325,7 +853,7 @@ > > compatible = "allwinner,sun4i-a10-ps2"; > > reg = <0x01c2a400 0x400>; > > interrupts = <63>; > > - clocks = <&apb1_gates 7>; > > + clocks = <&ccu CLK_APB1_PS21>; > > status = "disabled"; > > }; > > }; > > -- > > git-series 0.9.1 > > > > -- > > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: >> > Convert sun4i-a10.dtsi to new CCU driver. >> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >> >> I finally got around to bisecting a mainline boot failure on >> sun4i-a10-cubieboard that's been happening for quite a while. Based >> on on kernelci.org, it showed up sometime during the v4.15 merge >> window[1]. It bisected down to this commit (in mainline as commit >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). >> >> When it fails, there is no output on the serial console, so I don't >> know exactly how it's failing, just that it no longer boots. > > We tried out latest 4.15 with various compilers and it works: > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet > - gcc 7.2.0-debian - A10 Cubieboard And you can reproduce the bug with gcc5 or gcc6? Very strange that a DT only patch would cause a gcc related regression and if it does, it should be investigated. I don't think requiring gcc7 is an appropriate solution. @Chen-Yu, @Maxime: are you guys OK with requiring gcc7 for working upstream boot for A10? Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > >> > Convert sun4i-a10.dtsi to new CCU driver. > >> > > >> > Signed-off-by: Priit Laes <plaes@plaes.org> > >> > >> I finally got around to bisecting a mainline boot failure on > >> sun4i-a10-cubieboard that's been happening for quite a while. Based > >> on on kernelci.org, it showed up sometime during the v4.15 merge > >> window[1]. It bisected down to this commit (in mainline as commit > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). > >> > >> When it fails, there is no output on the serial console, so I don't > >> know exactly how it's failing, just that it no longer boots. > > > > We tried out latest 4.15 with various compilers and it works: > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet > > - gcc 7.2.0-debian - A10 Cubieboard > > And you can reproduce the bug with gcc5 or gcc6? > > Very strange that a DT only patch would cause a gcc related regression > and if it does, it should be investigated. I don't think requiring > gcc7 is an appropriate solution. > > @Chen-Yu, @Maxime: are you guys OK with requiring gcc7 for working > upstream boot for A10? I'd rather not set that kind of constraints and fix the issue instead. Priit, can you test with an older compiler? You can find one here: http://toolchains.free-electrons.com/ Maxime
On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > >> > Convert sun4i-a10.dtsi to new CCU driver. > >> > > >> > Signed-off-by: Priit Laes <plaes@plaes.org> > >> > >> I finally got around to bisecting a mainline boot failure on > >> sun4i-a10-cubieboard that's been happening for quite a while. Based > >> on on kernelci.org, it showed up sometime during the v4.15 merge > >> window[1]. It bisected down to this commit (in mainline as commit > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). > >> > >> When it fails, there is no output on the serial console, so I don't > >> know exactly how it's failing, just that it no longer boots. > > > > We tried out latest 4.15 with various compilers and it works: > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet > > - gcc 7.2.0-debian - A10 Cubieboard > > And you can reproduce the bug with gcc5 or gcc6? Tried following commits on Gemei G9 (A10 tablet): * 4.15.0-rc3-00037-gd39a01eff9af - latest master * 4.14.0-rc1-00002-g41193869f2bd - the exact commit, causing the issue. With the same Linaro toolchain: (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) > > Very strange that a DT only patch would cause a gcc related regression > and if it does, it should be investigated. I don't think requiring > gcc7 is an appropriate solution. > > @Chen-Yu, @Maxime: are you guys OK with requiring gcc7 for working > upstream boot for A10? > > Kevin > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 13, 2017 at 05:09:33PM +0000, Priit Laes wrote: > On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: > > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: > > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: > > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: > > >> > Convert sun4i-a10.dtsi to new CCU driver. > > >> > > > >> > Signed-off-by: Priit Laes <plaes@plaes.org> > > >> > > >> I finally got around to bisecting a mainline boot failure on > > >> sun4i-a10-cubieboard that's been happening for quite a while. Based > > >> on on kernelci.org, it showed up sometime during the v4.15 merge > > >> window[1]. It bisected down to this commit (in mainline as commit > > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). > > >> > > >> When it fails, there is no output on the serial console, so I don't > > >> know exactly how it's failing, just that it no longer boots. > > > > > > We tried out latest 4.15 with various compilers and it works: > > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet > > > - gcc 7.2.0-debian - A10 Cubieboard > > > > And you can reproduce the bug with gcc5 or gcc6? > > Tried following commits on Gemei G9 (A10 tablet): > * 4.15.0-rc3-00037-gd39a01eff9af - latest master > * 4.14.0-rc1-00002-g41193869f2bd - the exact commit, causing the issue. > > With the same Linaro toolchain: > (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) And I also tried the same dtb and zImage from kernelci page [1] and it works with that too... https://storage.kernelci.org/mainline/master/v4.15-rc3/arm/sunxi_defconfig/ > > > > > Very strange that a DT only patch would cause a gcc related regression > > and if it does, it should be investigated. I don't think requiring > > gcc7 is an appropriate solution. > > > > @Chen-Yu, @Maxime: are you guys OK with requiring gcc7 for working > > upstream boot for A10? > > > > Kevin > > > > -- > > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 13, 2017 at 9:13 AM, Priit Laes <plaes@plaes.org> wrote: > On Wed, Dec 13, 2017 at 05:09:33PM +0000, Priit Laes wrote: >> On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: >> > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: >> > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: >> > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: >> > >> > Convert sun4i-a10.dtsi to new CCU driver. >> > >> > >> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >> > >> >> > >> I finally got around to bisecting a mainline boot failure on >> > >> sun4i-a10-cubieboard that's been happening for quite a while. Based >> > >> on on kernelci.org, it showed up sometime during the v4.15 merge >> > >> window[1]. It bisected down to this commit (in mainline as commit >> > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). >> > >> >> > >> When it fails, there is no output on the serial console, so I don't >> > >> know exactly how it's failing, just that it no longer boots. >> > > >> > > We tried out latest 4.15 with various compilers and it works: >> > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet >> > > - gcc 7.2.0-debian - A10 Cubieboard >> > >> > And you can reproduce the bug with gcc5 or gcc6? >> >> Tried following commits on Gemei G9 (A10 tablet): >> * 4.15.0-rc3-00037-gd39a01eff9af - latest master >> * 4.14.0-rc1-00002-g41193869f2bd - the exact commit, causing the issue. >> >> With the same Linaro toolchain: >> (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) > > And I also tried the same dtb and zImage from kernelci page [1] and it works with > that too... > > https://storage.kernelci.org/mainline/master/v4.15-rc3/arm/sunxi_defconfig/ Can you share a full boot-log (including all the u-boot output etc.) so I can see exactly how the kernel is being loaded? Especially the u-boot version? As $SUBJECT patch seems to be changing clocks around, perhaps this is an issue where some u-boot dependency is uncovered, and older versions of u-boot don't play well with this change. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Dec 13, 2017 at 11:46 AM, Kevin Hilman <khilman@baylibre.com> wrote: > On Wed, Dec 13, 2017 at 9:13 AM, Priit Laes <plaes@plaes.org> wrote: >> On Wed, Dec 13, 2017 at 05:09:33PM +0000, Priit Laes wrote: >>> On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: >>> > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: >>> > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: >>> > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: >>> > >> > Convert sun4i-a10.dtsi to new CCU driver. >>> > >> > >>> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >>> > >> >>> > >> I finally got around to bisecting a mainline boot failure on >>> > >> sun4i-a10-cubieboard that's been happening for quite a while. Based >>> > >> on on kernelci.org, it showed up sometime during the v4.15 merge >>> > >> window[1]. It bisected down to this commit (in mainline as commit >>> > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). >>> > >> >>> > >> When it fails, there is no output on the serial console, so I don't >>> > >> know exactly how it's failing, just that it no longer boots. >>> > > >>> > > We tried out latest 4.15 with various compilers and it works: >>> > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet >>> > > - gcc 7.2.0-debian - A10 Cubieboard >>> > >>> > And you can reproduce the bug with gcc5 or gcc6? >>> >>> Tried following commits on Gemei G9 (A10 tablet): >>> * 4.15.0-rc3-00037-gd39a01eff9af - latest master >>> * 4.14.0-rc1-00002-g41193869f2bd - the exact commit, causing the issue. >>> >>> With the same Linaro toolchain: >>> (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) >> >> And I also tried the same dtb and zImage from kernelci page [1] and it works with >> that too... >> >> https://storage.kernelci.org/mainline/master/v4.15-rc3/arm/sunxi_defconfig/ > > Can you share a full boot-log (including all the u-boot output etc.) > so I can see exactly how the kernel is being loaded? Especially the > u-boot version? > > As $SUBJECT patch seems to be changing clocks around, perhaps this is > an issue where some u-boot dependency is uncovered, and older versions > of u-boot don't play well with this change. Ping. This is still failing in mainline, but passing int stable <= v4.14 Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Jan 6, 2018 at 12:10 AM, Kevin Hilman <khilman@baylibre.com> wrote: > On Wed, Dec 13, 2017 at 11:46 AM, Kevin Hilman <khilman@baylibre.com> wrote: >> On Wed, Dec 13, 2017 at 9:13 AM, Priit Laes <plaes@plaes.org> wrote: >>> On Wed, Dec 13, 2017 at 05:09:33PM +0000, Priit Laes wrote: >>>> On Tue, Dec 12, 2017 at 01:24:52PM -0800, Kevin Hilman wrote: >>>> > On Tue, Dec 12, 2017 at 9:26 AM, Priit Laes <plaes@plaes.org> wrote: >>>> > > On Mon, Dec 11, 2017 at 02:22:30PM -0800, Kevin Hilman wrote: >>>> > >> On Sun, Mar 26, 2017 at 10:20 AM, Priit Laes <plaes@plaes.org> wrote: >>>> > >> > Convert sun4i-a10.dtsi to new CCU driver. >>>> > >> > >>>> > >> > Signed-off-by: Priit Laes <plaes@plaes.org> >>>> > >> >>>> > >> I finally got around to bisecting a mainline boot failure on >>>> > >> sun4i-a10-cubieboard that's been happening for quite a while. Based >>>> > >> on on kernelci.org, it showed up sometime during the v4.15 merge >>>> > >> window[1]. It bisected down to this commit (in mainline as commit >>>> > >> 41193869f2bdb585ce09bfdd16d9482aadd560ad). >>>> > >> >>>> > >> When it fails, there is no output on the serial console, so I don't >>>> > >> know exactly how it's failing, just that it no longer boots. >>>> > > >>>> > > We tried out latest 4.15 with various compilers and it works: >>>> > > - gcc version 7.1.1 20170622 (Red Hat Cross 7.1.1-3) (GCC) - A10 Gemei G9 tablet >>>> > > - gcc 7.2.0-debian - A10 Cubieboard >>>> > >>>> > And you can reproduce the bug with gcc5 or gcc6? >>>> >>>> Tried following commits on Gemei G9 (A10 tablet): >>>> * 4.15.0-rc3-00037-gd39a01eff9af - latest master >>>> * 4.14.0-rc1-00002-g41193869f2bd - the exact commit, causing the issue. >>>> >>>> With the same Linaro toolchain: >>>> (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) >>> >>> And I also tried the same dtb and zImage from kernelci page [1] and it works with >>> that too... >>> >>> https://storage.kernelci.org/mainline/master/v4.15-rc3/arm/sunxi_defconfig/ >> >> Can you share a full boot-log (including all the u-boot output etc.) >> so I can see exactly how the kernel is being loaded? Especially the >> u-boot version? >> >> As $SUBJECT patch seems to be changing clocks around, perhaps this is >> an issue where some u-boot dependency is uncovered, and older versions >> of u-boot don't play well with this change. > > Ping. > > This is still failing in mainline, but passing int stable <= v4.14 Just did a test with clean builds of v4.15-rc7 with sunxi_defconfig and U-boot 2018.01-rc3 with Cubieboard_defconfig. It successfully boots to a prompt. My previous bootloader was U-boot 2017.05 with some local modifications. Here is the full boot log: https://wens.tw/cb-boot-log.txt The boot script is: setenv bootargs console=tty0 console=ttyS0,115200n8 root=/dev/mmcblk0p1 rootwait panic=10 earlycon=uart,mmio32,0x01c28000 consoleblank=0 drm.debug=0x1e load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} boot/zImage load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} boot/${fdtfile} bootz ${kernel_addr_r} - ${fdt_addr_r} Regards ChenYu -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ba20b48..0d8320a 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -45,7 +45,8 @@ #include <dt-bindings/thermal/thermal.h> -#include <dt-bindings/clock/sun4i-a10-pll2.h> +#include <dt-bindings/clock/sunxi-a10-a20-ccu.h> +#include <dt-bindings/reset/sunxi-a10-a20-ccu.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -65,9 +66,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&de_be0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -75,10 +76,11 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI1>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_TCON0_CH1>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -86,9 +88,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, + <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -96,11 +99,11 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, - <&de_be0_clk>, <&de_fe0_clk>, - <&tcon0_ch1_clk>, <&dram_gates 5>, - <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, + <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, + <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, + <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; }; @@ -112,7 +115,7 @@ device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -168,18 +171,6 @@ #size-cells = <1>; ranges; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - osc24M: clk@01c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; @@ -188,487 +179,12 @@ clock-output-names = "osc24M"; }; - osc3M: osc3M_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "osc3M"; - }; - osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll2: clk@01c20008 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll2-clk"; - reg = <0x01c20008 0x8>; - clocks = <&osc24M>; - clock-output-names = "pll2-1x", "pll2-2x", - "pll2-4x", "pll2-8x"; - }; - - pll3: clk@01c20010 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20010 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll3"; - }; - - pll3x2: pll3x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll3>; - clock-output-names = "pll3-2x"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - pll7: clk@01c20030 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll3-clk"; - reg = <0x01c20030 0x4>; - clocks = <&osc3M>; - clock-output-names = "pll7"; - }; - - pll7x2: pll7x2_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <2>; - clocks = <&pll7>; - clock-output-names = "pll7-2x"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-indices = <0>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - - ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-ahb-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb>; - clock-indices = <0>, <1>, - <2>, <3>, - <4>, <5>, <6>, - <7>, <8>, <9>, - <10>, <11>, <12>, - <13>, <14>, <16>, - <17>, <18>, <20>, - <21>, <22>, <23>, - <24>, <25>, <26>, - <32>, <33>, <34>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <45>, - <46>, <47>, - <50>, <52>; - clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", - "ahb_ohci1", "ahb_ss", "ahb_dma", - "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", - "ahb_nand", "ahb_sdram", "ahb_ace", - "ahb_emac", "ahb_ts", "ahb_spi0", - "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", - "ahb_ve", "ahb_tvd", "ahb_tve0", - "ahb_tve1", "ahb_lcd0", "ahb_lcd1", - "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", - "ahb_de_fe0", "ahb_de_fe1", - "ahb_mp", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb0-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb0>; - clock-indices = <0>, <1>, - <2>, <3>, - <5>, <6>, - <7>, <10>; - clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", - "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <4>, - <5>, <6>, - <7>, <16>, - <17>, <18>, - <19>, <20>, - <21>, <22>, - <23>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", - "apb1_scr", "apb1_ps20", - "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", - "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", - "apb1_uart7"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - pata_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "pata"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - ir1_clk: clk@01c200b4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir1"; - }; - - spdif_clk: clk@01c200c0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod1-clk"; - reg = <0x01c200c0 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_8X>, - <&pll2 SUN4I_A10_PLL2_4X>, - <&pll2 SUN4I_A10_PLL2_2X>, - <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "spdif"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", - "usb_phy"; - }; - - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200d4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; - - dram_gates: clk@01c20100 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-dram-gates-clk"; - reg = <0x01c20100 0x4>; - clocks = <&pll5 0>; - clock-indices = <0>, - <1>, <2>, - <3>, - <4>, - <5>, <6>, - <15>, - <24>, <25>, - <26>, <27>, - <28>, <29>; - clock-output-names = "dram_ve", - "dram_csi0", "dram_csi1", - "dram_ts", - "dram_tvd", - "dram_tve0", "dram_tve1", - "dram_output", - "dram_de_fe1", "dram_de_fe0", - "dram_de_be0", "dram_de_be1", - "dram_de_mp", "dram_ace"; - }; - - de_be0_clk: clk@01c20104 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20104 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be0"; - }; - - de_be1_clk: clk@01c20108 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20108 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-be1"; - }; - - de_fe0_clk: clk@01c2010c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c2010c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe0"; - }; - - de_fe1_clk: clk@01c20110 { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-display-clk"; - reg = <0x01c20110 0x4>; - clocks = <&pll3>, <&pll7>, <&pll5 1>; - clock-output-names = "de-fe1"; - }; - - - tcon0_ch0_clk: clk@01c20118 { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c20118 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch0-sclk"; - - }; - - tcon1_ch0_clk: clk@01c2011c { - #clock-cells = <0>; - #reset-cells = <1>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c2011c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch0-sclk"; - - }; - - tcon0_ch1_clk: clk@01c2012c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; - reg = <0x01c2012c 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon0-ch1-sclk"; - - }; - - tcon1_ch1_clk: clk@01c20130 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; - reg = <0x01c20130 0x4>; - clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; - clock-output-names = "tcon1-ch1-sclk"; - - }; - - ve_clk: clk@01c2013c { - #clock-cells = <0>; - #reset-cells = <0>; - compatible = "allwinner,sun4i-a10-ve-clk"; - reg = <0x01c2013c 0x4>; - clocks = <&pll4>; - clock-output-names = "ve"; - }; - - codec_clk: clk@01c20140 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-codec-clk"; - reg = <0x01c20140 0x4>; - clocks = <&pll2 SUN4I_A10_PLL2_1X>; - clock-output-names = "codec"; - }; }; soc@01c00000 { @@ -717,7 +233,7 @@ compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; - clocks = <&ahb_gates 6>; + clocks = <&ccu CLK_AHB_DMA>; #dma-cells = <2>; }; @@ -725,7 +241,7 @@ compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 3>; dma-names = "rxtx"; @@ -738,7 +254,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 27>, <&dma SUN4I_DMA_DEDICATED 26>; @@ -752,7 +268,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 9>, <&dma SUN4I_DMA_DEDICATED 8>; @@ -766,7 +282,7 @@ compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; - clocks = <&ahb_gates 17>; + clocks = <&ccu CLK_AHB_EMAC>; allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -782,10 +298,10 @@ mmc0: mmc@01c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_AHB_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -799,10 +315,10 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_AHB_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -816,10 +332,10 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_AHB_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -833,10 +349,10 @@ mmc3: mmc@01c12000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; + clocks = <&ccu CLK_AHB_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", @@ -850,7 +366,7 @@ usb_otg: usb@01c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; - clocks = <&ahb_gates 0>; + clocks = <&ccu CLK_AHB_OTG>; interrupts = <38>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -865,9 +381,11 @@ compatible = "allwinner,sun4i-a10-usb-phy"; reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>; + clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; @@ -876,7 +394,7 @@ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; - clocks = <&ahb_gates 1>; + clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -886,7 +404,7 @@ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; + clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -896,7 +414,7 @@ compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <86>; - clocks = <&ahb_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; }; @@ -904,7 +422,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 29>, <&dma SUN4I_DMA_DEDICATED 28>; @@ -918,7 +436,8 @@ compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; - clocks = <&pll6 0>, <&ahb_gates 25>; + clocks = <&ccu CLK_PLL_PERIPH_SATA>, + <&ccu CLK_AHB_SATA>; status = "disabled"; }; @@ -926,7 +445,7 @@ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <40>; - clocks = <&ahb_gates 3>; + clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -936,7 +455,7 @@ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <65>; - clocks = <&usb_clk 7>, <&ahb_gates 4>; + clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -946,7 +465,7 @@ compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; interrupts = <50>; - clocks = <&ahb_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma SUN4I_DMA_DEDICATED 31>, <&dma SUN4I_DMA_DEDICATED 30>; @@ -956,6 +475,15 @@ #size-cells = <0>; }; + ccu: clock@01c20000 { + compatible = "allwinner,sun4i-a10-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + intc: interrupt-controller@01c20400 { compatible = "allwinner,sun4i-a10-ic"; reg = <0x01c20400 0x400>; @@ -967,7 +495,7 @@ compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -1145,7 +673,7 @@ compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x400>; interrupts = <13>; - clocks = <&apb0_gates 1>, <&spdif_clk>; + clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma SUN4I_DMA_NORMAL 2>, <&dma SUN4I_DMA_NORMAL 2>; @@ -1155,7 +683,7 @@ ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; + clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; clock-names = "apb", "ir"; interrupts = <5>; reg = <0x01c21800 0x40>; @@ -1164,7 +692,7 @@ ir1: ir@01c21c00 { compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 7>, <&ir1_clk>; + clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; clock-names = "apb", "ir"; interrupts = <6>; reg = <0x01c21c00 0x40>; @@ -1183,7 +711,7 @@ compatible = "allwinner,sun4i-a10-codec"; reg = <0x01c22c00 0x40>; interrupts = <30>; - clocks = <&apb0_gates 0>, <&codec_clk>; + clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; clock-names = "apb", "codec"; dmas = <&dma SUN4I_DMA_NORMAL 19>, <&dma SUN4I_DMA_NORMAL 19>; @@ -1209,7 +737,7 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; + clocks = <&ccu CLK_APB1_UART0>; status = "disabled"; }; @@ -1219,7 +747,7 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; + clocks = <&ccu CLK_APB1_UART1>; status = "disabled"; }; @@ -1229,7 +757,7 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; + clocks = <&ccu CLK_APB1_UART2>; status = "disabled"; }; @@ -1239,7 +767,7 @@ interrupts = <4>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; + clocks = <&ccu CLK_APB1_UART3>; status = "disabled"; }; @@ -1249,7 +777,7 @@ interrupts = <17>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; + clocks = <&ccu CLK_APB1_UART4>; status = "disabled"; }; @@ -1259,7 +787,7 @@ interrupts = <18>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; + clocks = <&ccu CLK_APB1_UART5>; status = "disabled"; }; @@ -1269,7 +797,7 @@ interrupts = <19>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 22>; + clocks = <&ccu CLK_APB1_UART6>; status = "disabled"; }; @@ -1279,7 +807,7 @@ interrupts = <20>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 23>; + clocks = <&ccu CLK_APB1_UART7>; status = "disabled"; }; @@ -1287,7 +815,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <7>; - clocks = <&apb1_gates 0>; + clocks = <&ccu CLK_APB1_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1297,7 +825,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <8>; - clocks = <&apb1_gates 1>; + clocks = <&ccu CLK_APB1_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1307,7 +835,7 @@ compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <9>; - clocks = <&apb1_gates 2>; + clocks = <&ccu CLK_APB1_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1317,7 +845,7 @@ compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <62>; - clocks = <&apb1_gates 6>; + clocks = <&ccu CLK_APB1_PS20>; status = "disabled"; }; @@ -1325,7 +853,7 @@ compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a400 0x400>; interrupts = <63>; - clocks = <&apb1_gates 7>; + clocks = <&ccu CLK_APB1_PS21>; status = "disabled"; }; };
Convert sun4i-a10.dtsi to new CCU driver. Signed-off-by: Priit Laes <plaes@plaes.org> --- arch/arm/boot/dts/sun4i-a10.dtsi | 636 ++++---------------------------- 1 file changed, 82 insertions(+), 554 deletions(-)