@@ -33,8 +33,7 @@
#include <linux/types.h>
#include <linux/irqhandler.h>
#include <linux/of.h>
-#include <linux/mutex.h>
-#include <linux/radix-tree.h>
+#include <linux/xarray.h>
struct device_node;
struct irq_domain;
@@ -151,7 +150,7 @@ struct irq_domain_chip_generic;
* @revmap_direct_max_irq: The largest hwirq that can be set for controllers that
* support direct mapping
* @revmap_size: Size of the linear map table @linear_revmap[]
- * @revmap_tree: Radix map tree for hwirqs that don't fit in the linear map
+ * @revmap_array: hwirqs that don't fit in the linear map
* @linear_revmap: Linear table of hwirq->virq reverse mappings
*/
struct irq_domain {
@@ -177,8 +176,7 @@ struct irq_domain {
irq_hw_number_t hwirq_max;
unsigned int revmap_direct_max_irq;
unsigned int revmap_size;
- struct radix_tree_root revmap_tree;
- struct mutex revmap_tree_mutex;
+ struct xarray revmap_array;
unsigned int linear_revmap[];
};
@@ -378,7 +376,7 @@ extern void irq_dispose_mapping(unsigned int virq);
* This is a fast path alternative to irq_find_mapping() that can be
* called directly by irq controller code to save a handful of
* instructions. It is always safe to call, but won't find irqs mapped
- * using the radix tree.
+ * using the xarray.
*/
static inline unsigned int irq_linear_revmap(struct irq_domain *domain,
irq_hw_number_t hwirq)
@@ -145,6 +145,7 @@ int xa_get_entries(struct xarray *, void **dst, unsigned long start,
unsigned long max, unsigned int n);
int xa_get_tagged(struct xarray *, void **dst, unsigned long start,
unsigned long max, unsigned int n, xa_tag_t);
+unsigned long xa_count(struct xarray *);
/**
* xa_get_maybe_tag() - Copy entries from the XArray into a normal array.
@@ -114,7 +114,7 @@ EXPORT_SYMBOL_GPL(irq_domain_free_fwnode);
/**
* __irq_domain_add() - Allocate a new irq_domain data structure
* @fwnode: firmware node for the interrupt controller
- * @size: Size of linear map; 0 for radix mapping only
+ * @size: Size of linear map; 0 for xarray mapping only
* @hwirq_max: Maximum number of interrupts supported by controller
* @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
* direct mapping
@@ -209,8 +209,7 @@ struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
of_node_get(of_node);
/* Fill structure */
- INIT_RADIX_TREE(&domain->revmap_tree, GFP_KERNEL);
- mutex_init(&domain->revmap_tree_mutex);
+ xa_init(&domain->revmap_array);
domain->ops = ops;
domain->host_data = host_data;
domain->hwirq_max = hwirq_max;
@@ -241,7 +240,7 @@ void irq_domain_remove(struct irq_domain *domain)
mutex_lock(&irq_domain_mutex);
debugfs_remove_domain_dir(domain);
- WARN_ON(!radix_tree_empty(&domain->revmap_tree));
+ WARN_ON(!xa_empty(&domain->revmap_array));
list_del(&domain->link);
@@ -462,9 +461,7 @@ static void irq_domain_clear_mapping(struct irq_domain *domain,
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = 0;
} else {
- mutex_lock(&domain->revmap_tree_mutex);
- radix_tree_delete(&domain->revmap_tree, hwirq);
- mutex_unlock(&domain->revmap_tree_mutex);
+ xa_erase(&domain->revmap_array, hwirq);
}
}
@@ -475,9 +472,7 @@ static void irq_domain_set_mapping(struct irq_domain *domain,
if (hwirq < domain->revmap_size) {
domain->linear_revmap[hwirq] = irq_data->irq;
} else {
- mutex_lock(&domain->revmap_tree_mutex);
- radix_tree_insert(&domain->revmap_tree, hwirq, irq_data);
- mutex_unlock(&domain->revmap_tree_mutex);
+ xa_store(&domain->revmap_array, hwirq, irq_data, GFP_KERNEL);
}
}
@@ -585,7 +580,7 @@ EXPORT_SYMBOL_GPL(irq_domain_associate_many);
* This routine is used for irq controllers which can choose the hardware
* interrupt numbers they generate. In such a case it's simplest to use
* the linux irq as the hardware interrupt number. It still uses the linear
- * or radix tree to store the mapping, but the irq controller can optimize
+ * or xarray to store the mapping, but the irq controller can optimize
* the revmap path by using the hwirq directly.
*/
unsigned int irq_create_direct_mapping(struct irq_domain *domain)
@@ -890,9 +885,7 @@ unsigned int irq_find_mapping(struct irq_domain *domain,
if (hwirq < domain->revmap_size)
return domain->linear_revmap[hwirq];
- rcu_read_lock();
- data = radix_tree_lookup(&domain->revmap_tree, hwirq);
- rcu_read_unlock();
+ data = xa_load(&domain->revmap_array, hwirq);
return data ? data->irq : 0;
}
EXPORT_SYMBOL_GPL(irq_find_mapping);
@@ -943,8 +936,6 @@ static int virq_debug_show(struct seq_file *m, void *private)
unsigned long flags;
struct irq_desc *desc;
struct irq_domain *domain;
- struct radix_tree_iter iter;
- void __rcu **slot;
int i;
seq_printf(m, " %-16s %-6s %-10s %-10s %s\n",
@@ -953,7 +944,6 @@ static int virq_debug_show(struct seq_file *m, void *private)
list_for_each_entry(domain, &irq_domain_list, link) {
struct device_node *of_node;
const char *name;
-
int count = 0;
of_node = irq_domain_get_of_node(domain);
@@ -965,8 +955,7 @@ static int virq_debug_show(struct seq_file *m, void *private)
else
name = "";
- radix_tree_for_each_slot(slot, &domain->revmap_tree, &iter, 0)
- count++;
+ count = xa_count(&domain->revmap_array);
seq_printf(m, "%c%-16s %6u %10u %10u %s\n",
domain == irq_default_domain ? '*' : ' ', domain->name,
domain->revmap_size + count, domain->revmap_size,
@@ -1452,17 +1441,9 @@ int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base,
/* The irq_data was moved, fix the revmap to refer to the new location */
static void irq_domain_fix_revmap(struct irq_data *d)
{
- void __rcu **slot;
-
if (d->hwirq < d->domain->revmap_size)
- return; /* Not using radix tree. */
-
- /* Fix up the revmap. */
- mutex_lock(&d->domain->revmap_tree_mutex);
- slot = radix_tree_lookup_slot(&d->domain->revmap_tree, d->hwirq);
- if (slot)
- radix_tree_replace_slot(&d->domain->revmap_tree, slot, d);
- mutex_unlock(&d->domain->revmap_tree_mutex);
+ return;
+ xa_store(&d->domain->revmap_array, d->hwirq, d, GFP_KERNEL);
}
/**
@@ -1518,6 +1518,31 @@ int xa_get_tagged(struct xarray *xa, void **dst, unsigned long start,
}
EXPORT_SYMBOL(xa_get_tagged);
+/**
+ * xa_count() - Count the number of present entries in the XArray
+ * @xa: XArray.
+ *
+ * This function walks the XArray counting how many entries are present.
+ * If every entry in the XArray is full, this function will return 0. If
+ * this is a theoretical possibility, check xa_empty() first.
+ *
+ * This is a naive implementation; faster implementations are possible.
+ * If speed is important, consider maintaining a count variable in your
+ * own data structure.
+ */
+unsigned long xa_count(struct xarray *xa)
+{
+ XA_STATE(xas, xa, 0);
+ void *p;
+ unsigned long count = 0;
+
+ xas_for_each(&xas, p, ULONG_MAX)
+ count++;
+
+ return count;
+}
+EXPORT_SYMBOL(xa_count);
+
/**
* xa_destroy() - Free all internal data structures.
* @xa: XArray.