diff mbox

[v3,3/5] arm64: dts: rockchip: add usb3-phy otg-port support for rk3399.

Message ID 20171215110005.7564-3-enric.balletbo@collabora.com (mailing list archive)
State New, archived
Headers show

Commit Message

Enric Balletbo i Serra Dec. 15, 2017, 11 a.m. UTC
Add the usb3 phyter for the USB3.0 OTG controller.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes since v1:
 - Split the original patch in different commits
Changes since v2:
 - None

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Heiko Stübner Dec. 16, 2017, 5:06 p.m. UTC | #1
Am Freitag, 15. Dezember 2017, 12:00:03 CET schrieb Enric Balletbo i Serra:
> Add the usb3 phyter for the USB3.0 OTG controller.
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

applied for 4.16
Heiko Stübner March 2, 2018, 7:43 a.m. UTC | #2
Am Samstag, 16. Dezember 2017, 18:06:50 CET schrieb Heiko Stuebner:
> Am Freitag, 15. Dezember 2017, 12:00:03 CET schrieb Enric Balletbo i Serra:
> > Add the usb3 phyter for the USB3.0 OTG controller.
> > 
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> 
> applied for 4.16

and reverted again for the 4.16 cycle due to the regressions it causes on
non-gru boards.

I've requeued it in my temporary 4.18 branch and will readd it once
the typec-phy changeset gets merged.


Heiko
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index f32e9c4..ea91f25 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -409,8 +409,8 @@ 
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy0_otg>;
-			phy-names = "usb2-phy";
+			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -439,8 +439,8 @@ 
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy1_otg>;
-			phy-names = "usb2-phy";
+			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;