diff mbox

[v5,7/8] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops

Message ID 20171218093153.GA22729@lenoch (mailing list archive)
State New, archived
Headers show

Commit Message

Ladislav Michl Dec. 18, 2017, 9:31 a.m. UTC
Keerthy,

On Tue, Dec 12, 2017 at 11:42:16AM +0530, Keerthy wrote:
> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
> 
> Changes in v4:
> 
>   * Switched to dev_get_platdata.

Where do you expect dev.platform_data to be set? PWM driver is failing
with:
omap-dmtimer-pwm dmtimer-pwm: dmtimer pdata structure NULL
omap-dmtimer-pwm: probe of dmtimer-pwm failed with error -22

Which I fixed with patch bellow, to be able to test your patchset.

Also I'm running a bit out of time, so I'll send few clean up
patches and event capture code to get some feedback early.

Regards,
	ladis


> 
> Changes in v3:
> 
>   * Used of_find_platdata_by_node function to fetch platform
>     data for timer node.
> 
>  drivers/pwm/pwm-omap-dmtimer.c | 39 ++++++++++++++++++++++-----------------
>  1 file changed, 22 insertions(+), 17 deletions(-)

Comments

J, KEERTHY Dec. 18, 2017, 12:55 p.m. UTC | #1
On Monday 18 December 2017 03:01 PM, Ladislav Michl wrote:
> Keerthy,
> 
> On Tue, Dec 12, 2017 at 11:42:16AM +0530, Keerthy wrote:
>> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>
>> Changes in v4:
>>
>>   * Switched to dev_get_platdata.
> 
> Where do you expect dev.platform_data to be set? PWM driver is failing
> with:
> omap-dmtimer-pwm dmtimer-pwm: dmtimer pdata structure NULL
> omap-dmtimer-pwm: probe of dmtimer-pwm failed with error -22
> 
> Which I fixed with patch bellow, to be able to test your patchset.

Thanks! I will make the below patch part of my series.

> 
> Also I'm running a bit out of time, so I'll send few clean up
> patches and event capture code to get some feedback early.
> 
> Regards,
> 	ladis
> 
> diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c
> index 39be39e6a8dd..d3d8a49cae0d 100644
> --- a/drivers/clocksource/timer-dm.c
> +++ b/drivers/clocksource/timer-dm.c
> @@ -773,6 +773,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
>  		dev_err(dev, "%s: no platform data.\n", __func__);
>  		return -ENODEV;
>  	}
> +	dev->platform_data = pdata;
>  
>  	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>  	if (unlikely(!irq)) {
> 
>>
>> Changes in v3:
>>
>>   * Used of_find_platdata_by_node function to fetch platform
>>     data for timer node.
>>
>>  drivers/pwm/pwm-omap-dmtimer.c | 39 ++++++++++++++++++++++-----------------
>>  1 file changed, 22 insertions(+), 17 deletions(-)
J, KEERTHY Dec. 19, 2017, 4:58 a.m. UTC | #2
On Monday 18 December 2017 06:25 PM, Keerthy wrote:
> 
> 
> On Monday 18 December 2017 03:01 PM, Ladislav Michl wrote:
>> Keerthy,
>>
>> On Tue, Dec 12, 2017 at 11:42:16AM +0530, Keerthy wrote:
>>> Adapt driver to utilize dmtimer pdata ops instead of pdata-quirks.
>>>
>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>> ---
>>>
>>> Changes in v4:
>>>
>>>   * Switched to dev_get_platdata.
>>
>> Where do you expect dev.platform_data to be set? PWM driver is failing
>> with:
>> omap-dmtimer-pwm dmtimer-pwm: dmtimer pdata structure NULL
>> omap-dmtimer-pwm: probe of dmtimer-pwm failed with error -22
>>
>> Which I fixed with patch bellow, to be able to test your patchset.
> 
> Thanks! I will make the below patch part of my series.
> 
>>
>> Also I'm running a bit out of time, so I'll send few clean up
>> patches and event capture code to get some feedback early.
>>
>> Regards,
>> 	ladis
>>
>> diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c
>> index 39be39e6a8dd..d3d8a49cae0d 100644
>> --- a/drivers/clocksource/timer-dm.c
>> +++ b/drivers/clocksource/timer-dm.c
>> @@ -773,6 +773,7 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
>>  		dev_err(dev, "%s: no platform data.\n", __func__);
>>  		return -ENODEV;
>>  	}
>> +	dev->platform_data = pdata;

drivers/clocksource/timer-dm.c: In function 'omap_dm_timer_probe':
drivers/clocksource/timer-dm.c:744:21: warning: assignment discards
'const' qualifier from pointer target type

This cannot be done as we are assigning a const pointer to a non-const
pointer.

I will figure out a different way for this fix.

>>  
>>  	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>>  	if (unlikely(!irq)) {
>>
>>>
>>> Changes in v3:
>>>
>>>   * Used of_find_platdata_by_node function to fetch platform
>>>     data for timer node.
>>>
>>>  drivers/pwm/pwm-omap-dmtimer.c | 39 ++++++++++++++++++++++-----------------
>>>  1 file changed, 22 insertions(+), 17 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
diff mbox

Patch

diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c
index 39be39e6a8dd..d3d8a49cae0d 100644
--- a/drivers/clocksource/timer-dm.c
+++ b/drivers/clocksource/timer-dm.c
@@ -773,6 +773,7 @@  static int omap_dm_timer_probe(struct platform_device *pdev)
 		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
+	dev->platform_data = pdata;
 
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!irq)) {