diff mbox

[resend] arm: dts: ls1021a: Add label to USB controllers

Message ID 1512461794-12309-1-git-send-email-rasmus.villemoes@prevas.dk (mailing list archive)
State New, archived
Headers show

Commit Message

Rasmus Villemoes Dec. 5, 2017, 8:16 a.m. UTC 
From: Esben Haabendal <eha@deif.com>

Add usb2 and usb3 labels to USB2 and USB3 controller device tree nodes,
for easier modification in board dts files.

Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 arch/arm/boot/dts/ls1021a.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Shawn Guo Dec. 21, 2017, 8:06 a.m. UTC | #1 
On Tue, Dec 05, 2017 at 09:16:33AM +0100, Rasmus Villemoes wrote:
> From: Esben Haabendal <eha@deif.com>
> 
> Add usb2 and usb3 labels to USB2 and USB3 controller device tree nodes,
> for easier modification in board dts files.
> 
> Signed-off-by: Esben Haabendal <eha@deif.com>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

Fixed prefix and applied the patch.

Shawn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 3ff2b8a9f01a..02a266faec9b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -675,7 +675,7 @@ 
 			};
 		};
 
-		usb@8600000 {
+		usb2: usb@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,7 +683,7 @@ 
 			phy_type = "ulpi";
 		};
 
-		usb3@3100000 {
+		usb3: usb3@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;