| Message ID | 20171219223242.21386-1-robertcnelson@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Robert Nelson <robertcnelson@gmail.com> [171219 14:35]: > Use the correct IRQ gpio pin on the BeagleBone Blue to allow the > wl1835 wireless module to actually work. Thanks applying all three into omap-for-v4.16/dt. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index d5be9fc4f416..c5820919e709 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -216,7 +216,7 @@ wl18xx_pins: pinmux_wl18xx_pins { pinctrl-single,pins = < AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */ - AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */ + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */ >; }; @@ -414,7 +414,7 @@ compatible = "ti,wl1835"; reg = <2>; interrupt-parent = <&gpio0>; - interrupts = <29 IRQ_TYPE_EDGE_RISING>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; }; };
Use the correct IRQ gpio pin on the BeagleBone Blue to allow the wl1835 wireless module to actually work. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> CC: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am335x-boneblue.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)