diff mbox

[7/7] ARM: dts: imx6ull: add UART8 support

Message ID 20180102164223.15230-7-stefan@agner.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Agner Jan. 2, 2018, 4:42 p.m. UTC 
In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of
AIPS-1. Clocks and interrupts remain the same.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/imx6ull.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Dong Aisheng Jan. 9, 2018, 9:38 a.m. UTC | #1 
On Tue, Jan 02, 2018 at 05:42:23PM +0100, Stefan Agner wrote:
> In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of
> AIPS-1. Clocks and interrupts remain the same.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>

Acked-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng

> ---
>  arch/arm/boot/dts/imx6ull.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index bc2cd4fb8b12..571ddd71cdba 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -43,6 +43,9 @@
>  #include "imx6ull-pinfunc.h"
>  #include "imx6ull-pinfunc-snvs.h"
>  
> +/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
> +/delete-node/ &uart8;
> +
>  / {
>  	soc {
>  		aips3: aips-bus@2200000 {
> @@ -56,6 +59,17 @@
>  				compatible = "fsl,imx6ull-iomuxc-snvs";
>  				reg = <0x02290000 0x4000>;
>  			};
> +
> +			uart8: serial@2288000 {
> +				compatible = "fsl,imx6ul-uart",
> +					     "fsl,imx6q-uart";
> +				reg = <0x02288000 0x4000>;
> +				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
> +					 <&clks IMX6UL_CLK_UART8_SERIAL>;
> +				clock-names = "ipg", "per";
> +				status = "disabled";
> +			};
>  		};
>  	};
>  };
> -- 
> 2.15.1
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index bc2cd4fb8b12..571ddd71cdba 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -43,6 +43,9 @@ 
 #include "imx6ull-pinfunc.h"
 #include "imx6ull-pinfunc-snvs.h"
 
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+
 / {
 	soc {
 		aips3: aips-bus@2200000 {
@@ -56,6 +59,17 @@ 
 				compatible = "fsl,imx6ull-iomuxc-snvs";
 				reg = <0x02290000 0x4000>;
 			};
+
+			uart8: serial@2288000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+					 <&clks IMX6UL_CLK_UART8_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
 		};
 	};
 };