[v2,13/16] power: supply: axp20x_battery: add support for AXP813

Commit Message

Quentin Schulz Jan. 9, 2018, 9:33 a.m. UTC

The X-Powers AXP813 PMIC has got some slight differences from
AXP20X/AXP22X PMICs:
 - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
 for AXP20X/AXP22X,
 - the constant charge current formula is different,

It also has a bit to tell whether the battery percentage returned by the
PMIC is valid.

Signed-off-by: Quentin Schulz <[e-mail]>
---
 drivers/power/supply/axp20x_battery.c | 42 ++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+)

Comments

Julian Calaby Jan. 9, 2018, 12:53 p.m. UTC | #1

Hi Quentin,

On Tue, Jan 9, 2018 at 8:33 PM, Quentin Schulz
<[e-mail]> wrote:
> The X-Powers AXP813 PMIC has got some slight differences from
> AXP20X/AXP22X PMICs:
>  - the maximum voltage supplied by the PMIC is 4.35 instead of 4.36/4.24
>  for AXP20X/AXP22X,
>  - the constant charge current formula is different,
>
> It also has a bit to tell whether the battery percentage returned by the
> PMIC is valid.
>
> Signed-off-by: Quentin Schulz <[e-mail]>
> ---
>  drivers/power/supply/axp20x_battery.c | 42 ++++++++++++++++++++++++++++-
>  1 file changed, 42 insertions(+)
>
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index d73c78f..dad72a5 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -46,6 +46,8 @@
>  #define AXP20X_CHRG_CTRL1_TGT_4_2V     (2 << 5)
>  #define AXP20X_CHRG_CTRL1_TGT_4_36V    (3 << 5)
>
> +#define AXP813_CHRG_CTRL1_TGT_4_35V    (3 << 5)
> +
>  #define AXP22X_CHRG_CTRL1_TGT_4_22V    (1 << 5)
>  #define AXP22X_CHRG_CTRL1_TGT_4_24V    (3 << 5)

Should these be "alphabetical", i.e. AXP20X, AXP22X, AXP813?

Thanks,

Patch

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index d73c78f..dad72a5 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -46,6 +46,8 @@ 
 #define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
 #define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
 
+#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
+
 #define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
 #define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
 
@@ -133,6 +135,35 @@  static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
 	return 0;
 }
 
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
+{
+	int ret, reg;
+
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_15V:
+		*val = 4150000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP813_CHRG_CTRL1_TGT_4_35V:
+		*val = 4350000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
 					      int *val)
 {
@@ -491,6 +522,14 @@  struct axp_data axp221_data = {
 	.set_max_voltage = axp22x_battery_set_max_voltage,
 };
 
+struct axp_data axp813_data = {
+	.ccc_scale = 200000,
+	.ccc_offset = 200000,
+	.has_fg_valid = true,
+	.get_max_voltage = axp813_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
 static const struct of_device_id axp20x_battery_ps_id[] = {
 	{
 		.compatible = "x-powers,axp209-battery-power-supply",
@@ -498,6 +537,9 @@  static const struct of_device_id axp20x_battery_ps_id[] = {
 	}, {
 		.compatible = "x-powers,axp221-battery-power-supply",
 		.data = (void *)&axp221_data,
+	}, {
+		.compatible = "x-powers,axp813-battery-power-supply",
+		.data = (void *)&axp813_data,
 	}, { /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);