| Message ID | 20180117214714.GB11952@lenoch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 17.01.2018 23:47, Ladislav Michl wrote: > Invalid value silently disables use of the prescaler. > Use -1 explicitely for that purpose and error out on > invalid value. > > Signed-off-by: Ladislav Michl <ladis@linux-mips.org> > --- > drivers/clocksource/timer-dm.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c > index 60db1734ea3b..324ec93d3dd2 100644 > --- a/drivers/clocksource/timer-dm.c > +++ b/drivers/clocksource/timer-dm.c > @@ -663,13 +663,13 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) > { > u32 l; > > - if (unlikely(!timer)) > + if (unlikely(!timer) || prescaler < -1 || prescaler > 7) You are checking the prescaller here to be in [0, 7] interval. > return -EINVAL; > > omap_dm_timer_enable(timer); > l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); > l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2)); > - if (prescaler >= 0x00 && prescaler <= 0x07) { > + if (prescaler >= 0) { Is this check still necessary? > l |= OMAP_TIMER_CTRL_PRE; > l |= prescaler << 2; > } > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 22, 2018 at 11:00:15AM +0200, Claudiu Beznea wrote: > > > On 17.01.2018 23:47, Ladislav Michl wrote: > > Invalid value silently disables use of the prescaler. > > Use -1 explicitely for that purpose and error out on > > invalid value. > > > > Signed-off-by: Ladislav Michl <ladis@linux-mips.org> > > --- > > drivers/clocksource/timer-dm.c | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c > > index 60db1734ea3b..324ec93d3dd2 100644 > > --- a/drivers/clocksource/timer-dm.c > > +++ b/drivers/clocksource/timer-dm.c > > @@ -663,13 +663,13 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) > > { > > u32 l; > > > > - if (unlikely(!timer)) > > + if (unlikely(!timer) || prescaler < -1 || prescaler > 7) > You are checking the prescaller here to be in [0, 7] interval. You mean [-1, 7] I suppose. > > return -EINVAL; > > > > omap_dm_timer_enable(timer); > > l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); > > l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2)); > > - if (prescaler >= 0x00 && prescaler <= 0x07) { > > + if (prescaler >= 0) { > Is this check still necessary? Yes, as we need also some way to disable prescaler, see commit message. > > l |= OMAP_TIMER_CTRL_PRE; > > l |= prescaler << 2; > > } Best regards, ladis -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 22.01.2018 11:59, Ladislav Michl wrote: > On Mon, Jan 22, 2018 at 11:00:15AM +0200, Claudiu Beznea wrote: >> >> >> On 17.01.2018 23:47, Ladislav Michl wrote: >>> Invalid value silently disables use of the prescaler. >>> Use -1 explicitely for that purpose and error out on >>> invalid value. >>> >>> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> >>> --- >>> drivers/clocksource/timer-dm.c | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c >>> index 60db1734ea3b..324ec93d3dd2 100644 >>> --- a/drivers/clocksource/timer-dm.c >>> +++ b/drivers/clocksource/timer-dm.c >>> @@ -663,13 +663,13 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) >>> { >>> u32 l; >>> >>> - if (unlikely(!timer)) >>> + if (unlikely(!timer) || prescaler < -1 || prescaler > 7) >> You are checking the prescaller here to be in [0, 7] interval. > > You mean [-1, 7] I suppose. Right, [-1, 7], my bad. Ok, So you use -1 to disable the prescaler. > >>> return -EINVAL; >>> >>> omap_dm_timer_enable(timer); >>> l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); >>> l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2)); >>> - if (prescaler >= 0x00 && prescaler <= 0x07) { >>> + if (prescaler >= 0) { >> Is this check still necessary? > > Yes, as we need also some way to disable prescaler, see commit message. > >>> l |= OMAP_TIMER_CTRL_PRE; >>> l |= prescaler << 2; >>> } > > Best regards, > ladis > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clocksource/timer-dm.c b/drivers/clocksource/timer-dm.c index 60db1734ea3b..324ec93d3dd2 100644 --- a/drivers/clocksource/timer-dm.c +++ b/drivers/clocksource/timer-dm.c @@ -663,13 +663,13 @@ int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler) { u32 l; - if (unlikely(!timer)) + if (unlikely(!timer) || prescaler < -1 || prescaler > 7) return -EINVAL; omap_dm_timer_enable(timer); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2)); - if (prescaler >= 0x00 && prescaler <= 0x07) { + if (prescaler >= 0) { l |= OMAP_TIMER_CTRL_PRE; l |= prescaler << 2; }
Invalid value silently disables use of the prescaler. Use -1 explicitely for that purpose and error out on invalid value. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> --- drivers/clocksource/timer-dm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html