| Message ID | 20170927125831.11759-1-andi.shyti@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On Wed, Sep 27, 2017 at 09:58:31PM +0900, Andi Shyti wrote: > The interrupt is requested before the device is powered on and > it's value in some cases cannot be reliable. It happens on some > devices that an interrupt is generated as soon as requested > before having the chance to disable the irq. > > Set the irq flag as IRQ_NOAUTOEN before requesting it. > > This patch mutes the error: > > stmfts 2-0049: failed to read events: -11 > > received sometimes during boot time. > > Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Applied, thank you. > --- > drivers/input/touchscreen/stmfts.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c > index 2351199189a4..362de0001b33 100644 > --- a/drivers/input/touchscreen/stmfts.c > +++ b/drivers/input/touchscreen/stmfts.c > @@ -689,6 +689,14 @@ static int stmfts_probe(struct i2c_client *client, > > input_set_drvdata(sdata->input, sdata); > > + /* > + * stmfts_power_on expects interrupt to be disabled, but > + * at this point the device is still off and I do not trust > + * the status of the irq line that can generate some spurious > + * interrupts. To be on the safe side it's better to not enable > + * the interrupts during their request. > + */ > + irq_set_status_flags(client->irq, IRQ_NOAUTOEN); > err = devm_request_threaded_irq(&client->dev, client->irq, > NULL, stmfts_irq_handler, > IRQF_ONESHOT, > @@ -696,9 +704,6 @@ static int stmfts_probe(struct i2c_client *client, > if (err) > return err; > > - /* stmfts_power_on expects interrupt to be disabled */ > - disable_irq(client->irq); > - > dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n"); > > err = stmfts_power_on(sdata); > -- > 2.14.2 >
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c index 2351199189a4..362de0001b33 100644 --- a/drivers/input/touchscreen/stmfts.c +++ b/drivers/input/touchscreen/stmfts.c @@ -689,6 +689,14 @@ static int stmfts_probe(struct i2c_client *client, input_set_drvdata(sdata->input, sdata); + /* + * stmfts_power_on expects interrupt to be disabled, but + * at this point the device is still off and I do not trust + * the status of the irq line that can generate some spurious + * interrupts. To be on the safe side it's better to not enable + * the interrupts during their request. + */ + irq_set_status_flags(client->irq, IRQ_NOAUTOEN); err = devm_request_threaded_irq(&client->dev, client->irq, NULL, stmfts_irq_handler, IRQF_ONESHOT, @@ -696,9 +704,6 @@ static int stmfts_probe(struct i2c_client *client, if (err) return err; - /* stmfts_power_on expects interrupt to be disabled */ - disable_irq(client->irq); - dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n"); err = stmfts_power_on(sdata);
The interrupt is requested before the device is powered on and it's value in some cases cannot be reliable. It happens on some devices that an interrupt is generated as soon as requested before having the chance to disable the irq. Set the irq flag as IRQ_NOAUTOEN before requesting it. This patch mutes the error: stmfts 2-0049: failed to read events: -11 received sometimes during boot time. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> --- drivers/input/touchscreen/stmfts.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)