| Message ID | 20180205172110.9897-1-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Feb 5, 2018 at 6:21 PM, Sylwester Nawrocki <s.nawrocki@samsung.com> wrote: > Add DT node for the second I2S controller available on Exynos 5433 > SoC. While at it the i2s0 node name is changed to a more generic > "i2s" and missing properties are added to that node. Please split it - one patch for adding new I2S and second minor cleanup in i2s0 and adding of required properties. I think there are no dependencies on driver code changes... but let me know if I am wrong. Best regards, Krzysztof > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 23 ++++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > index 62f276970174..2b73bd86bc56 100644 > --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi > @@ -1311,6 +1311,25 @@ > status = "disabled"; > }; > > + i2s1: i2s@14d60000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x14d60000 0x100>; > + dmas = <&pdma0 31 &pdma0 30>; > + dma-names = "tx", "rx"; > + interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; > + clocks = <&cmu_peric CLK_PCLK_I2S1>, > + <&cmu_peric CLK_PCLK_I2S1>, > + <&cmu_peric CLK_SCLK_I2S1>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + #clock-cells = <1>; > + samsung,supports-6ch; > + samsung,supports-rstclr; > + samsung,supports-tdm; > + samsung,supports-low-rfs; > + #sound-dai-cells = <1>; > + status = "disabled"; > + }; > + > pwm: pwm@14dd0000 { > compatible = "samsung,exynos4210-pwm"; > reg = <0x14dd0000 0x100>; > @@ -1639,7 +1658,7 @@ > power-domains = <&pd_aud>; > }; > > - i2s0: i2s0@11440000 { > + i2s0: i2s@11440000 { > compatible = "samsung,exynos7-i2s"; > reg = <0x11440000 0x100>; > dmas = <&adma 0 &adma 2>; > @@ -1651,9 +1670,11 @@ > <&cmu_aud CLK_SCLK_AUD_I2S>, > <&cmu_aud CLK_SCLK_I2S_BCLK>; > clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + #clock-cells = <1>; > pinctrl-names = "default"; > pinctrl-0 = <&i2s0_bus>; > power-domains = <&pd_aud>; > + #sound-dai-cells = <1>; > status = "disabled"; > }; > > -- > 2.14.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/06/2018 02:07 PM, Krzysztof Kozlowski wrote: > On Mon, Feb 5, 2018 at 6:21 PM, Sylwester Nawrocki > <s.nawrocki@samsung.com> wrote: >> Add DT node for the second I2S controller available on Exynos 5433 >> SoC. While at it the i2s0 node name is changed to a more generic >> "i2s" and missing properties are added to that node. > > Please split it - one patch for adding new I2S and second minor > cleanup in i2s0 and adding of required properties. OK, will split it in next iteration. > I think there are no dependencies on driver code changes... but let me > know if I am wrong. Yes, the dts and driver changes are independent, it should work in all combinations: old dts/new driver, new dts/new driver, new dts/old driver. -- Regards, Sylwester -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 62f276970174..2b73bd86bc56 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1311,6 +1311,25 @@ status = "disabled"; }; + i2s1: i2s@14d60000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x14d60000 0x100>; + dmas = <&pdma0 31 &pdma0 30>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; + clocks = <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-tdm; + samsung,supports-low-rfs; + #sound-dai-cells = <1>; + status = "disabled"; + }; + pwm: pwm@14dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x14dd0000 0x100>; @@ -1639,7 +1658,7 @@ power-domains = <&pd_aud>; }; - i2s0: i2s0@11440000 { + i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0 &adma 2>; @@ -1651,9 +1670,11 @@ <&cmu_aud CLK_SCLK_AUD_I2S>, <&cmu_aud CLK_SCLK_I2S_BCLK>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; power-domains = <&pd_aud>; + #sound-dai-cells = <1>; status = "disabled"; };
Add DT node for the second I2S controller available on Exynos 5433 SoC. While at it the i2s0 node name is changed to a more generic "i2s" and missing properties are added to that node. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)