Message ID | 7e5b35d540b5937481b1b9a44cd926b170a81188.1310549521.git.hans.verkuil@cisco.com (mailing list archive) |
---|---|
State | RFC |
Headers | show |
Hello, On Wednesday, July 13, 2011 11:39 AM Hans Verkuil wrote: > From: Hans Verkuil <hans.verkuil@cisco.com> > > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > drivers/media/video/videobuf2-core.c | 41 +++++++++++++++++++++++------- > --- > 1 files changed, 28 insertions(+), 13 deletions(-) > > diff --git a/drivers/media/video/videobuf2-core.c > b/drivers/media/video/videobuf2-core.c > index 1892bb8..1922bf8 100644 > --- a/drivers/media/video/videobuf2-core.c > +++ b/drivers/media/video/videobuf2-core.c > @@ -19,6 +19,9 @@ > #include <linux/slab.h> > #include <linux/sched.h> > > +#include <media/v4l2-dev.h> > +#include <media/v4l2-fh.h> > +#include <media/v4l2-event.h> > #include <media/videobuf2-core.h> > > static int debug; > @@ -1360,15 +1363,28 @@ static int __vb2_cleanup_fileio(struct vb2_queue > *q); > * For OUTPUT queues, if a buffer is ready to be dequeued, the file > descriptor > * will be reported as available for writing. > * > + * If the driver uses struct v4l2_fh, then vb2_poll() will also check for > any > + * pending events. > + * > * The return values from this function are intended to be directly > returned > * from poll handler in driver. > */ > unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table > *wait) > { > + struct video_device *vfd = video_devdata(file); > unsigned long req_events = poll_requested_events(wait); > - unsigned long flags; > - unsigned int ret; > struct vb2_buffer *vb = NULL; > + unsigned int res = 0; > + unsigned long flags; > + > + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) { > + struct v4l2_fh *fh = file->private_data; > + > + if (v4l2_event_pending(fh)) > + res = POLLPRI; > + else if (req_events & POLLPRI) > + poll_wait(file, &fh->wait, wait); > + } > > /* > * Start file I/O emulator only if streaming API has not been used > yet. > @@ -1376,19 +1392,17 @@ unsigned int vb2_poll(struct vb2_queue *q, struct > file *file, poll_table *wait) > if (q->num_buffers == 0 && q->fileio == NULL) { > if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ) > && > (req_events & (POLLIN | POLLRDNORM))) { > - ret = __vb2_init_fileio(q, 1); > - if (ret) > - return POLLERR; > + if (__vb2_init_fileio(q, 1)) > + return res | POLLERR; > } > if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE) > && > (req_events & (POLLOUT | POLLWRNORM))) { > - ret = __vb2_init_fileio(q, 0); > - if (ret) > - return POLLERR; > + if (__vb2_init_fileio(q, 0)) > + return res | POLLERR; > /* > * Write to OUTPUT queue can be done immediately. > */ > - return POLLOUT | POLLWRNORM; > + return res | POLLOUT | POLLWRNORM; > } > } > > @@ -1396,7 +1410,7 @@ unsigned int vb2_poll(struct vb2_queue *q, struct > file *file, poll_table *wait) > * There is nothing to wait for if no buffers have already been > queued. > */ > if (list_empty(&q->queued_list)) > - return POLLERR; > + return res | POLLERR; > > poll_wait(file, &q->done_wq, wait); > > @@ -1411,10 +1425,11 @@ unsigned int vb2_poll(struct vb2_queue *q, struct > file *file, poll_table *wait) > > if (vb && (vb->state == VB2_BUF_STATE_DONE > || vb->state == VB2_BUF_STATE_ERROR)) { > - return (V4L2_TYPE_IS_OUTPUT(q->type)) ? POLLOUT | POLLWRNORM : > - POLLIN | POLLRDNORM; > + return (V4L2_TYPE_IS_OUTPUT(q->type)) ? > + res | POLLOUT | POLLWRNORM : > + res | POLLIN | POLLRDNORM; > } > - return 0; > + return res; > } > EXPORT_SYMBOL_GPL(vb2_poll); > > -- Best regards
On Sun, Jul 17, 2011 at 23:30, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > Hello, > > On Wednesday, July 13, 2011 11:39 AM Hans Verkuil wrote: > >> From: Hans Verkuil <hans.verkuil@cisco.com> >> >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > > Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> > Acked-by: Pawel Osciak <pawel@osciak.com> >> --- >> drivers/media/video/videobuf2-core.c | 41 +++++++++++++++++++++++------- >> --- >> 1 files changed, 28 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/media/video/videobuf2-core.c >> b/drivers/media/video/videobuf2-core.c >> index 1892bb8..1922bf8 100644 >> --- a/drivers/media/video/videobuf2-core.c >> +++ b/drivers/media/video/videobuf2-core.c >> @@ -19,6 +19,9 @@ >> #include <linux/slab.h> >> #include <linux/sched.h> >> >> +#include <media/v4l2-dev.h> >> +#include <media/v4l2-fh.h> >> +#include <media/v4l2-event.h> >> #include <media/videobuf2-core.h> >> >> static int debug; >> @@ -1360,15 +1363,28 @@ static int __vb2_cleanup_fileio(struct vb2_queue >> *q); >> * For OUTPUT queues, if a buffer is ready to be dequeued, the file >> descriptor >> * will be reported as available for writing. >> * >> + * If the driver uses struct v4l2_fh, then vb2_poll() will also check for >> any >> + * pending events. >> + * >> * The return values from this function are intended to be directly >> returned >> * from poll handler in driver. >> */ >> unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table >> *wait) >> { >> + struct video_device *vfd = video_devdata(file); >> unsigned long req_events = poll_requested_events(wait); >> - unsigned long flags; >> - unsigned int ret; >> struct vb2_buffer *vb = NULL; >> + unsigned int res = 0; >> + unsigned long flags; >> + >> + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) { >> + struct v4l2_fh *fh = file->private_data; >> + >> + if (v4l2_event_pending(fh)) >> + res = POLLPRI; >> + else if (req_events & POLLPRI) >> + poll_wait(file, &fh->wait, wait); >> + } >> >> /* >> * Start file I/O emulator only if streaming API has not been used >> yet. >> @@ -1376,19 +1392,17 @@ unsigned int vb2_poll(struct vb2_queue *q, struct >> file *file, poll_table *wait) >> if (q->num_buffers == 0 && q->fileio == NULL) { >> if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ) >> && >> (req_events & (POLLIN | POLLRDNORM))) { >> - ret = __vb2_init_fileio(q, 1); >> - if (ret) >> - return POLLERR; >> + if (__vb2_init_fileio(q, 1)) >> + return res | POLLERR; >> } >> if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE) >> && >> (req_events & (POLLOUT | POLLWRNORM))) { >> - ret = __vb2_init_fileio(q, 0); >> - if (ret) >> - return POLLERR; >> + if (__vb2_init_fileio(q, 0)) >> + return res | POLLERR; >> /* >> * Write to OUTPUT queue can be done immediately. >> */ >> - return POLLOUT | POLLWRNORM; >> + return res | POLLOUT | POLLWRNORM; >> } >> } >> >> @@ -1396,7 +1410,7 @@ unsigned int vb2_poll(struct vb2_queue *q, struct >> file *file, poll_table *wait) >> * There is nothing to wait for if no buffers have already been >> queued. >> */ >> if (list_empty(&q->queued_list)) >> - return POLLERR; >> + return res | POLLERR; >> >> poll_wait(file, &q->done_wq, wait); >> >> @@ -1411,10 +1425,11 @@ unsigned int vb2_poll(struct vb2_queue *q, struct >> file *file, poll_table *wait) >> >> if (vb && (vb->state == VB2_BUF_STATE_DONE >> || vb->state == VB2_BUF_STATE_ERROR)) { >> - return (V4L2_TYPE_IS_OUTPUT(q->type)) ? POLLOUT | POLLWRNORM : >> - POLLIN | POLLRDNORM; >> + return (V4L2_TYPE_IS_OUTPUT(q->type)) ? >> + res | POLLOUT | POLLWRNORM : >> + res | POLLIN | POLLRDNORM; >> } >> - return 0; >> + return res; >> } >> EXPORT_SYMBOL_GPL(vb2_poll); >> >> -- > > Best regards > -- > Marek Szyprowski > Samsung Poland R&D Center > > > >
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 1892bb8..1922bf8 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -19,6 +19,9 @@ #include <linux/slab.h> #include <linux/sched.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-event.h> #include <media/videobuf2-core.h> static int debug; @@ -1360,15 +1363,28 @@ static int __vb2_cleanup_fileio(struct vb2_queue *q); * For OUTPUT queues, if a buffer is ready to be dequeued, the file descriptor * will be reported as available for writing. * + * If the driver uses struct v4l2_fh, then vb2_poll() will also check for any + * pending events. + * * The return values from this function are intended to be directly returned * from poll handler in driver. */ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) { + struct video_device *vfd = video_devdata(file); unsigned long req_events = poll_requested_events(wait); - unsigned long flags; - unsigned int ret; struct vb2_buffer *vb = NULL; + unsigned int res = 0; + unsigned long flags; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) { + struct v4l2_fh *fh = file->private_data; + + if (v4l2_event_pending(fh)) + res = POLLPRI; + else if (req_events & POLLPRI) + poll_wait(file, &fh->wait, wait); + } /* * Start file I/O emulator only if streaming API has not been used yet. @@ -1376,19 +1392,17 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) if (q->num_buffers == 0 && q->fileio == NULL) { if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ) && (req_events & (POLLIN | POLLRDNORM))) { - ret = __vb2_init_fileio(q, 1); - if (ret) - return POLLERR; + if (__vb2_init_fileio(q, 1)) + return res | POLLERR; } if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE) && (req_events & (POLLOUT | POLLWRNORM))) { - ret = __vb2_init_fileio(q, 0); - if (ret) - return POLLERR; + if (__vb2_init_fileio(q, 0)) + return res | POLLERR; /* * Write to OUTPUT queue can be done immediately. */ - return POLLOUT | POLLWRNORM; + return res | POLLOUT | POLLWRNORM; } } @@ -1396,7 +1410,7 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) * There is nothing to wait for if no buffers have already been queued. */ if (list_empty(&q->queued_list)) - return POLLERR; + return res | POLLERR; poll_wait(file, &q->done_wq, wait); @@ -1411,10 +1425,11 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) if (vb && (vb->state == VB2_BUF_STATE_DONE || vb->state == VB2_BUF_STATE_ERROR)) { - return (V4L2_TYPE_IS_OUTPUT(q->type)) ? POLLOUT | POLLWRNORM : - POLLIN | POLLRDNORM; + return (V4L2_TYPE_IS_OUTPUT(q->type)) ? + res | POLLOUT | POLLWRNORM : + res | POLLIN | POLLRDNORM; } - return 0; + return res; } EXPORT_SYMBOL_GPL(vb2_poll);