Message ID | 3be3cd00b710827da46817693748eb6bcee00f82.1516200065.git.michal.simek@xilinx.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 17.1.2018 15:41, Michal Simek wrote: > zc770 is based board which is extended by FMC/DC cards for SoC > validation. FMCs/DCs are supposed to cover all SoC configurations. > FMC/DC contains can, ethernet, i2c, qspi, spi and uart. > > Signed-off-by: Michal Simek <michal.simek@xilinx.com> > --- > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++ > 2 files changed, 79 insertions(+) > create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 6bd4b9a29511..44be37afa544 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ > zynq-zc770-xm010.dtb \ > zynq-zc770-xm011.dtb \ > zynq-zc770-xm012.dtb \ > + zynq-zc770-xm013.dtb \ > zynq-zed.dtb \ > zynq-zybo.dtb > dtb-$(CONFIG_MACH_ARMADA_370) += \ > diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts > new file mode 100644 > index 000000000000..ad3e1d108a9b > --- /dev/null > +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts > @@ -0,0 +1,78 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Xilinx ZC770 XM013 board DTS > + * > + * Copyright (C) 2013 Xilinx, Inc. > + */ > +/dts-v1/; > +#include "zynq-7000.dtsi" > + > +/ { > + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; > + model = "Xilinx Zynq"; > + > + aliases { > + ethernet0 = &gem1; > + i2c0 = &i2c1; > + serial0 = &uart0; > + spi1 = &spi0; > + }; > + > + chosen { > + bootargs = ""; > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x40000000>; > + }; > +}; > + > +&can1 { > + status = "okay"; > +}; > + > +&gem1 { > + status = "okay"; > + phy-mode = "rgmii-id"; > + phy-handle = <ðernet_phy>; > + > + ethernet_phy: ethernet-phy@7 { > + reg = <7>; > + device_type = "ethernet-phy"; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + clock-frequency = <400000>; > + > + si570: clock-generator@55 { > + #clock-cells = <0>; > + compatible = "silabs,si570"; > + temperature-stability = <50>; > + reg = <0x55>; > + factory-fout = <156250000>; > + clock-frequency = <148500000>; > + }; > +}; > + > +&spi0 { > + status = "okay"; > + num-cs = <4>; > + is-decoded-cs = <0>; > + eeprom: at25@0 { This should be probably eeprom: eeprom@25. Rob: Do you see any other issue with this series? Or can I apply? Thanks, Michal
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6bd4b9a29511..44be37afa544 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zc770-xm010.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ + zynq-zc770-xm013.dtb \ zynq-zed.dtb \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts new file mode 100644 index 000000000000..ad3e1d108a9b --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c1; + serial0 = &uart0; + spi1 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + si570: clock-generator@55 { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x55>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: at25@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&uart0 { + status = "okay"; +};
zc770 is based board which is extended by FMC/DC cards for SoC validation. FMCs/DCs are supposed to cover all SoC configurations. FMC/DC contains can, ethernet, i2c, qspi, spi and uart. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts