| Message ID | 20180209062358.33457-1-aik@ozlabs.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Fri, Feb 09, 2018 at 05:23:58PM +1100, Alexey Kardashevskiy wrote: > Commit 59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") > replaced of_irq_parse_pci() + irq_create_of_mapping() with > of_irq_parse_and_map_pci() but this change lost virq returned by > irq_create_of_mapping() so virq remained zero causing INTx > misconfiguration. > > This fixes pci_read_irq_line() not to loose a virq returned by > of_irq_parse_and_map_pci(). s/not to loose a/to not lose the/ > Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper" > Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> I'm fine with this version. Since you started applying a previous version, Michael, I'll assume you will handle this unless you tell me otherwise. One way or another it would be good to get this in before -rc1. > --- > Changes: > v3: > * change virq from unsigned to int as of_irq_parse_and_map_pci returns int > and even though it only returns non-negative values now, this may change > in the future > > v2: > * changed the condition from <=0 to !=0 as by design > of_irq_parse_and_map_pci() can only return 0 for an error and virq>0. > --- > arch/powerpc/kernel/pci-common.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > index ae2ede4..446c796 100644 > --- a/arch/powerpc/kernel/pci-common.c > +++ b/arch/powerpc/kernel/pci-common.c > @@ -362,7 +362,7 @@ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) > */ > static int pci_read_irq_line(struct pci_dev *pci_dev) > { > - unsigned int virq = 0; > + int virq; > > pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); > > @@ -370,7 +370,8 @@ static int pci_read_irq_line(struct pci_dev *pci_dev) > memset(&oirq, 0xff, sizeof(oirq)); > #endif > /* Try to get a mapping from the device-tree */ > - if (!of_irq_parse_and_map_pci(pci_dev, 0, 0)) { > + virq = of_irq_parse_and_map_pci(pci_dev, 0, 0); > + if (virq <= 0) { > u8 line, pin; > > /* If that fails, lets fallback to what is in the config > -- > 2.11.0 >
On Fri, Feb 09, 2018 at 12:07:41PM -0600, Bjorn Helgaas wrote: > On Fri, Feb 09, 2018 at 05:23:58PM +1100, Alexey Kardashevskiy wrote: > > Commit 59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") > > replaced of_irq_parse_pci() + irq_create_of_mapping() with > > of_irq_parse_and_map_pci() but this change lost virq returned by > > irq_create_of_mapping() so virq remained zero causing INTx > > misconfiguration. > > > > This fixes pci_read_irq_line() not to loose a virq returned by > > of_irq_parse_and_map_pci(). > > s/not to loose a/to not lose the/ > > > Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper" > > Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> > > I'm fine with this version. > > Since you started applying a previous version, Michael, I'll assume > you will handle this unless you tell me otherwise. One way or another > it would be good to get this in before -rc1. I went ahead and applied this and asked Linus to pull it. > > --- > > Changes: > > v3: > > * change virq from unsigned to int as of_irq_parse_and_map_pci returns int > > and even though it only returns non-negative values now, this may change > > in the future > > > > v2: > > * changed the condition from <=0 to !=0 as by design > > of_irq_parse_and_map_pci() can only return 0 for an error and virq>0. > > --- > > arch/powerpc/kernel/pci-common.c | 5 +++-- > > 1 file changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > > index ae2ede4..446c796 100644 > > --- a/arch/powerpc/kernel/pci-common.c > > +++ b/arch/powerpc/kernel/pci-common.c > > @@ -362,7 +362,7 @@ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) > > */ > > static int pci_read_irq_line(struct pci_dev *pci_dev) > > { > > - unsigned int virq = 0; > > + int virq; > > > > pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); > > > > @@ -370,7 +370,8 @@ static int pci_read_irq_line(struct pci_dev *pci_dev) > > memset(&oirq, 0xff, sizeof(oirq)); > > #endif > > /* Try to get a mapping from the device-tree */ > > - if (!of_irq_parse_and_map_pci(pci_dev, 0, 0)) { > > + virq = of_irq_parse_and_map_pci(pci_dev, 0, 0); > > + if (virq <= 0) { > > u8 line, pin; > > > > /* If that fails, lets fallback to what is in the config > > -- > > 2.11.0 > >
Bjorn Helgaas <helgaas@kernel.org> writes: > On Fri, Feb 09, 2018 at 12:07:41PM -0600, Bjorn Helgaas wrote: >> On Fri, Feb 09, 2018 at 05:23:58PM +1100, Alexey Kardashevskiy wrote: >> > Commit 59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") >> > replaced of_irq_parse_pci() + irq_create_of_mapping() with >> > of_irq_parse_and_map_pci() but this change lost virq returned by >> > irq_create_of_mapping() so virq remained zero causing INTx >> > misconfiguration. >> > >> > This fixes pci_read_irq_line() not to loose a virq returned by >> > of_irq_parse_and_map_pci(). >> >> s/not to loose a/to not lose the/ >> >> > Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper" >> > Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> >> >> I'm fine with this version. >> >> Since you started applying a previous version, Michael, I'll assume >> you will handle this unless you tell me otherwise. One way or another >> it would be good to get this in before -rc1. > > I went ahead and applied this and asked Linus to pull it. Thanks. cheers
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index ae2ede4..446c796 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -362,7 +362,7 @@ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) */ static int pci_read_irq_line(struct pci_dev *pci_dev) { - unsigned int virq = 0; + int virq; pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); @@ -370,7 +370,8 @@ static int pci_read_irq_line(struct pci_dev *pci_dev) memset(&oirq, 0xff, sizeof(oirq)); #endif /* Try to get a mapping from the device-tree */ - if (!of_irq_parse_and_map_pci(pci_dev, 0, 0)) { + virq = of_irq_parse_and_map_pci(pci_dev, 0, 0); + if (virq <= 0) { u8 line, pin; /* If that fails, lets fallback to what is in the config
Commit 59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci() but this change lost virq returned by irq_create_of_mapping() so virq remained zero causing INTx misconfiguration. This fixes pci_read_irq_line() not to loose a virq returned by of_irq_parse_and_map_pci(). Fixes: 59f47eff03a0 "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> --- Changes: v3: * change virq from unsigned to int as of_irq_parse_and_map_pci returns int and even though it only returns non-negative values now, this may change in the future v2: * changed the condition from <=0 to !=0 as by design of_irq_parse_and_map_pci() can only return 0 for an error and virq>0. --- arch/powerpc/kernel/pci-common.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)