diff mbox

[01/10] ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes

Message ID f808613a9c7a4f23d3a0c64b6f3d4df1b905b16b.1518166039.git.viresh.kumar@linaro.org (mailing list archive)
State Accepted
Headers show

Commit Message

Viresh Kumar Feb. 9, 2018, 8:58 a.m. UTC 
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/boot/dts/exynos4210.dtsi      |  2 --
 arch/arm/boot/dts/exynos4412.dtsi      |  2 --
 arch/arm/boot/dts/exynos5250.dtsi      |  2 --
 arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ----------------
 arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ----------------
 5 files changed, 38 deletions(-)

Comments

Krzysztof Kozlowski Feb. 13, 2018, 6:16 p.m. UTC | #1 
On Fri, Feb 09, 2018 at 02:28:01PM +0530, Viresh Kumar wrote:
> The "cooling-min-level" and "cooling-max-level" properties are not
> parsed by any part of the kernel currently and the max cooling state of
> a CPU cooling device is found by referring to the cpufreq table instead.
> 
> Remove the unused properties from the CPU nodes.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/boot/dts/exynos4210.dtsi      |  2 --
>  arch/arm/boot/dts/exynos4412.dtsi      |  2 --
>  arch/arm/boot/dts/exynos5250.dtsi      |  2 --
>  arch/arm/boot/dts/exynos5420-cpus.dtsi | 16 ----------------
>  arch/arm/boot/dts/exynos5422-cpus.dtsi | 16 ----------------
>  5 files changed, 38 deletions(-)
> 

Thanks, applied.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index cc978cf28267..58ab34a233da 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -49,8 +49,6 @@ 
 				400000	975000
 				200000	950000
 			>;
-			cooling-min-level = <4>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e4ad2fc0329e..5f5cc12f2075 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -42,8 +42,6 @@ 
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 56626d1a4235..bb4180ef7885 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -77,8 +77,6 @@ 
 				 300000  937500
 				 200000  925000
 			>;
-			cooling-min-level = <15>;
-			cooling-max-level = <9>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 123f0cef658d..a8e449471304 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -30,8 +30,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -43,8 +41,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -56,8 +52,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -69,8 +63,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -83,8 +75,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -96,8 +86,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -109,8 +97,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -122,8 +108,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <7>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index c593809c7f08..7c130a00d1a8 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -29,8 +29,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -42,8 +40,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -55,8 +51,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -68,8 +62,6 @@ 
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <11>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <539>;
 		};
@@ -82,8 +74,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -95,8 +85,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -108,8 +96,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};
@@ -121,8 +107,6 @@ 
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
-			cooling-min-level = <0>;
-			cooling-max-level = <15>;
 			#cooling-cells = <2>; /* min followed by max */
 			capacity-dmips-mhz = <1024>;
 		};